Microchip Technology

ATXMEGA64D3-MN - 32MHz 64KB AVR MCU | Microchip Technology

MPN: ATXMEGA64D3-MN ✓ Aktif
1.6 V to 3.6 V Vdss 64-VFQFN with exposed pad Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATXMEGA64D3-MN Ringkasan

The Microchip Technology ATXMEGA64D3-MN is an 8/16-bit AVR XMEGA D3-series microcontroller with a 32 MHz clock, 64 KB of ISP Flash memory, 2 KB of EEPROM, and 4 KB of SRAM in a 64-pin VFQFN package with an exposed pad. The device operates from 1.6 V to 3.6 V and is intended for compact embedded systems that require substantial flash storage, event-system peripherals, and low-power operation.

An 8/16-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA family belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic component. It combines an AVR processing core with programmable peripherals that support event-driven control, timing, communications, analog measurement, and data acquisition without requiring separate logic devices for every function.

The XMEGA D3 architecture includes 64 KB of ISP Flash with read-while-write capability and a 4 KB boot-code section. Its memory arrangement supports firmware update, bootloader operation, and moderate data-processing workloads. The device also provides 2 KB of EEPROM for persistent parameters, 4 KB of SRAM for working data, and a four-channel event system that can connect peripherals directly and reduce processor intervention during time-critical operations.

The ATXMEGA64D3-MN supports operation from a 1.6 V to 3.6 V supply, allowing use in low-voltage industrial, consumer, communications, and embedded-control products. Its 32 MHz maximum clock rate provides useful performance for protocol handling, control loops, human-machine-interface scanning, and supervisory tasks while retaining the efficiency expected from an 8/16-bit architecture.

Typical applications include industrial data-acquisition modules, compact control boards, sensor-hub controllers, communication equipment, and low-power embedded products. The 64 KB Flash capacity is suitable for moderate application firmware, while the event system and programmable multi-level interrupt logic help designers organize deterministic responses across internal peripherals.

Design decisions should include careful review of pin multiplexing, supply decoupling, exposed-pad layout, and programming configuration before PCB release. Because the package contains 64 leads and an exposed thermal pad, the land pattern and soldering process must match the manufacturer package drawing. Use the pin-description table in the manufacturer datasheet when assigning traces and programming the I/O multiplexing registers.

This page combines manufacturer and distributor product information with application guidance, design notes, comparison fields, and verified drop-in replacement screening. The alternatives list intentionally excludes unverified package variants so that engineers can distinguish an electrically similar device from a genuinely pin-compatible replacement.

Alternatif penggantian untuk ATXMEGA64D3-MN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATXMEGA64D3-MN (sama faktor bentuk dan footprint) — berbeda di dalam Package, Event System Channels.

Microchip Technology
Package: 64-pin QFN (9x9 mm) with EP
Event System Channels: 4
Bandingkan dengan ATXMEGA64D3-MN →
Microchip Technology
Package: 44-pin VQFN, 7 x 7 mm
Bandingkan dengan ATXMEGA64D3-MN →

ATXMEGA64D3-MH

✅ Drop-In
Microchip Technology
📦 64-pin QFN, 9 mm x 9 mm
AVR XMEGA (8/16-bit RISC) · ATxmega D3 · 32 MHz · 64 KB (32K x 16) · 4 KB · 2 KB · 4 KB · 1.6 V to 3.6 V

Kontak untuk harga

Lihat Datasheet →

ATXMEGA128A3U-MN

✅ Drop-In
📦 64-pin QFN, 9 mm x 9 mm
Same 64-pin QFN class and 32 MHz family architecture, but flash is 128 KB rather than 64 KB, a +100% memory difference

📋 Alternatif referensi (tidak dalam katalog)

ATXMEGA64D3-MNR

✅ Drop-In
📦 64-pin QFN, 9 mm x 9 mm
Same electrical device and 64-pin QFN footprint; ordering code uses the -MNR tape-and-reel packing form

📋 Alternatif referensi (tidak dalam katalog)

ATXMEGA64A3-MN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-pin QFN, 9 mm x 9 mm
Same 32 MHz XMEGA class, 64 KB flash class, and 64-pin QFN footprint; A3-series peripheral mix differs from D3

📋 Alternatif referensi (tidak dalam katalog)

ATXMEGA64D4-MN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 64-pin QFN, 9 mm x 9 mm
8/16-bit AVR XMEGA microcontroller · 32 MHz · 64 KB · 4 KB · 2 KB · 4 KB · 34 lines · 4 channels

Kontak untuk harga

Lihat Datasheet →

ATXMEGA64D3-MN Rating Maksimal & Karakteristik Listrik

Product Type 8/16-bit AVR XMEGA D3 microcontroller
Frekuensi Bawah Maximum 32 MHz
Flash Memory 64 KB
Flash Organization 32K x 16
Boot Loader Section 4 KB
EEPROM Memory 2 KB
SRAM 4 KB
Operating Voltage 1.6 V to 3.6 V
Event System Channels 4 channels
Programmable Multi-Level Interrupt Logic Supported
ISP Flash Read-While-Write Supported
Paket 64-VFQFN with exposed pad
Package Dimensions 9 mm x 9 mm
Lead Count 64 pins
Tipe Mounting Surface mount
Temperature Rating 105 C
Green Product Classification Green
Programming Interface ISP

ATXMEGA64D3-MN 9 mm x 9 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATXMEGA64D3-MN (9 mm x 9 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 9 mm x 9 mm untuk ATXMEGA64D3-MN

Tidak ada data diatribut pin yang tersedia untuk ATXMEGA64D3-MN.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATXMEGA64D3-MN cocok untuk 6 aplikasis: Industrial Data-Acquisition Controller, Low-Voltage Sensor Hub, Communication Equipment Controller, Compact HMI and Control Panel, Battery-Powered Monitoring Device, Programmable Logic Controller.

🏭

Industrial Data-Acquisition Controller

The ATXMEGA64D3-MN fits compact data-acquisition equipment that must collect sensor information while managing control logic and communications on one PCB. Its 32 MHz clock supports responsive task scheduling, while 64 KB of ISP Flash provides room for application firmware, drivers, and protocol handlers. The four-channel event system can coordinate timer, capture, and communication events with less processor polling, helping preserve deterministic response time. The 1.6 V to 3.6 V operating range also supports low-voltage industrial architectures. Design the analog front end separately, and use the manufacturer I/O and pin tables when assigning external sensor interfaces, status indicators, and communication signals.

🧩

Low-Voltage Sensor Hub

The ATXMEGA64D3-MN is appropriate for a low-voltage sensor hub that combines periodic measurements, local filtering, status reporting, and configuration storage. Its 4 KB of SRAM supports working buffers and communication structures, while 2 KB of EEPROM can retain calibration values or device settings. The event system is particularly useful when several internal events must be prioritized without continuous polling. Operation from 1.6 V to 3.6 V allows integration with modern low-voltage sensors and power-management stages. Keep unused I/O pins in defined states, review wake-up behavior, and confirm timer accuracy against the system measurement schedule before finalizing the embedded design.

🌐

Communication Equipment Controller

ATXMEGA64D3-MN can serve as the supervisory controller in communication equipment that needs protocol management, configuration storage, and coordinated timing. The 32 MHz operating rate provides useful headroom for packet processing and status handling, and the 64 KB Flash capacity supports embedded firmware, communication stacks, and update logic. Its programmable multi-level interrupt logic can help service several event sources according to priority. For a production design, calculate protocol timing margins at the operating temperature and supply limits, isolate communication transceivers from sensitive timing paths, and validate every assigned peripheral and multiplexing option against the manufacturer pin and clock documentation.

📺

Compact HMI and Control Panel

The ATXMEGA64D3-MN can manage a compact human-machine interface with buttons, indicators, a small display, and an embedded control sequence. Its 64 KB of ISP Flash is suitable for interface logic and moderate application code, while 4 KB of SRAM can hold display buffers and input state. Event-driven peripheral coordination helps scan controls and update indicators efficiently. A 1.6 V to 3.6 V supply range supports compact mixed-signal systems, although an appropriate regulator and level-compatible display interface remain necessary. Place decoupling close to each supply connection, review active current across display and indicator loads, and use the manufacturer's package drawing to establish the exposed-pad connection before fabrication.

🔋

Battery-Powered Monitoring Device

ATXMEGA64D3-MN is suitable for a battery-powered environmental or asset-monitoring device that needs local logic, nonvolatile parameters, and low-voltage operation. EEPROM can preserve calibration data, thresholds, and counters, reducing repeated configuration activity through the communications interface. The 32 MHz clock provides enough performance for sampling coordination and protocol tasks without requiring a more complex processor architecture. Energy optimization still depends on the chosen active mode, idle mode, peripheral clocks, sensor duty cycle, and regulator efficiency. Validate wake-up timing, brownout behavior, and current consumption on the assembled board, and keep sensor excitation paths switched away from the MCU supply whenever the design permits.

⚡

Programmable Logic Controller

The ATXMEGA64D3-MN can be used in a small PLC or machine-control module where deterministic digital inputs, timer functions, interlocks, communications, and local diagnostics must be coordinated. Its four-channel event system and multi-level interrupt logic help structure time-sensitive internal events, while the 64 KB Flash capacity supports control routines and a bootloader. The 1.6 V to 3.6 V operating range supports industrial control modules built around low-voltage logic. Engineer the safety margin around worst-case clock accuracy, supply tolerance, and peripheral timing. Review reset behavior, watchdog use, I/O isolation, output-driver loading, and fail-safe states before using the device as part of a production control system.

What are the key specifications of ATXMEGA64D3-MN that engineers should know?
The ATXMEGA64D3-MN is a 32 MHz 8/16-bit AVR XMEGA D3 microcontroller with 64 KB of ISP Flash, 2 KB of EEPROM, and 4 KB of SRAM. It operates from 1.6 V to 3.6 V and is packaged in a 64-VFQFN configuration measuring 9 mm by 9 mm with an exposed pad. According to the Microchip Technology product page, the device also includes a four-channel event system, read-while-write Flash operation, and programmable multi-level interrupt logic for embedded-control designs.
What is the operating voltage of ATXMEGA64D3-MN?
The ATXMEGA64D3-MN operates from 1.6 V to 3.6 V. This range allows the microcontroller to be used in conventional low-voltage embedded systems without requiring a 5 V supply at the device pins. According to the Microchip Technology product documentation, designers must also preserve the voltage limits associated with each I/O bank and the exposed power and ground connections when planning the power architecture and decoupling network.
How much Flash memory and SRAM does ATXMEGA64D3-MN have?
The ATXMEGA64D3-MN contains 64 KB of ISP Flash, organized as 32K x 16, together with 4 KB of SRAM. The Flash includes a dedicated 4 KB boot-code section and supports read-while-write operation. According to the Microchip Technology product page, persistent configuration and calibration values can use the device's 2 KB of EEPROM, leaving the SRAM available for stack, working variables, buffers, and real-time control data.
Where can I download the ATXMEGA64D3-MN datasheet PDF?
The official ATXMEGA64D3-MN documentation is available through the Microchip Technology ATxmega64D3 product page at https://www.microchip.com/en-us/product/ATxmega64D3. Select the device's Data Sheet or documentation link for the manufacturer PDF. Use the manufacturer document for the complete 64-pin pin description, electrical characteristics, programming connections, package drawing, and exposed-pad land pattern rather than relying on a distributor summary.
Where is the ATXMEGA64D3-MN pinout located?
The authoritative ATXMEGA64D3-MN pinout is in the pin-description table and package drawing within the Microchip Technology ATxmega64D3 data sheet. The component uses a 64-VFQFN package with an exposed pad, so the exposed thermal and electrical pad must be distinguished from the 64 numbered perimeter leads. Use the manufacturer pin table when assigning multiplexing, power, ground, programming, reset, and communication functions to PCB traces.
What can replace ATXMEGA64D3-MN?
A true replacement for ATXMEGA64D3-MN must use the same 64-VFQFN footprint, preserve the perimeter-pin assignments, and match the important electrical, memory, clock, and peripheral characteristics. No verified drop-in equivalent was identified in the cross-reference results, so this page does not present an unverified substitute as a drop-in part. For an alternate design, compare the complete ATxmega64D3 device options against flash size, SRAM, EEPROM, voltage range, peripheral mix, pin multiplexing, and qualification requirements.
Is ATXMEGA64D3-MN pin-compatible with ATXMEGA256D3-AU?
The ATXMEGA256D3-AU is not confirmed as a drop-in replacement for the ATXMEGA64D3-MN because their package and ordering codes are not established as identical in the available cross-reference records. The devices belong to related XMEGA families, but related memory density does not by itself prove pin compatibility. Verify package dimensions, lead assignments, exposed-pad connections, voltage limits, and peripheral multiplexing against the manufacturer documentation before substituting one for the other.
Is ATXMEGA64D3-MN suitable for low-power embedded control?
The ATXMEGA64D3-MN is suitable for many low-voltage embedded-control systems because it operates from 1.6 V to 3.6 V and belongs to Microchip Technology's low-power XMEGA MCU family. Its four-channel event system can coordinate peripheral activity without continuous processor polling, while programmable multi-level interrupt logic supports prioritized event handling. Final power performance depends on the selected clock, active peripherals, sleep mode, I/O states, and the complete board-level design.
When should I choose ATXMEGA64D3-MN over another XMEGA microcontroller?
Choose the ATXMEGA64D3-MN when a design needs a 32 MHz AVR processor, 64 KB of ISP Flash, 2 KB of EEPROM, 4 KB of SRAM, and the D3 family's event-driven peripheral architecture in a 64-VFQFN package. Choose another XMEGA device when greater flash capacity, different SRAM, expanded peripheral coverage, a different package, or a different temperature grade is required. The choice should follow a complete comparison of memory, I/O, package, voltage, and qualification requirements.
What is the difference between ATXMEGA64D3-MN and ATXMEGA64A1-CUR?
The ATXMEGA64D3-MN and ATXMEGA64A1-CUR are different Microchip Technology XMEGA-family devices rather than confirmed pin-for-pin equivalents. The ATXMEGA64D3-MN is listed as a 32 MHz device with 64 KB Flash, 2 KB EEPROM, 4 KB SRAM, and a 64-VFQFN package, whereas the ATXMEGA64A1-CUR uses a different ordering code and package. Compare their manufacturer datasheets before considering a design change, especially peripheral assignments and memory requirements.
What is the best Microchip Technology equivalent for ATXMEGA64D3-MN?
The closest verified starting point is the ATxmega64D3 family because it shares the named XMEGA64D3 architecture, while another exact part number must be checked against the 64-VFQFN land pattern and pin map. No cross-brand drop-in equivalent was established from the available records. Select a replacement only after its package dimensions, supply range, clock, memory, boot configuration, interrupt system, peripheral multiplexing, and programming behavior have been compared with the ATXMEGA64D3-MN datasheet.
Where can I buy ATXMEGA64D3-MN online?
Use the Request a Quote form on this page to request ATXMEGA64D3-MN availability, current pricing, order quantity, and lead time. The form is the appropriate channel for a quote-based electronic-component purchase and allows the request to be tied to the exact 64-VFQFN ordering code. Confirm the package suffix, quantity, and delivery requirements in the request so that the quotation and shipment correspond precisely to ATXMEGA64D3-MN.
What is the price of ATXMEGA64D3-MN?
Use the Request a Quote form on this page to obtain the current ATXMEGA64D3-MN price for the required quantity. Pricing for this microcontroller can vary with order volume, package suffix, stock position, and fulfillment conditions, so a static amount can become obsolete. Include the target quantity, shipping destination, and required production dates in the quote request to obtain a commercially usable response.
What is the lead time and stock status for ATXMEGA64D3-MN?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The device is actively listed by its manufacturer and appears in current distributor catalogs, but those listings do not establish a guaranteed stock allocation for every order quantity. The quotation should confirm the production quantity, factory schedule, packaging form, delivery destination, and any date-specific supply constraints.
What design considerations apply to the 64-VFQFN ATXMEGA64D3-MN package?
The ATXMEGA64D3-MN requires a PCB land pattern that accommodates 64 perimeter leads and the exposed pad. Place the required input, output, and bypass capacitors near their associated power pins, connect the exposed pad according to the manufacturer package drawing, and maintain the specified copper and solder-mask geometry. Thermal performance depends on the pad connection and surrounding copper, so use the manufacturer package dimensions and recommended reflow profile rather than estimating the footprint from a generic QFN drawing.
Is ATXMEGA64D3-MN compliant with RoHS and REACH?
The product listings identify ATXMEGA64D3-MN as a green 8/16-bit microcontroller, but they do not state the exact RoHS or REACH compliance declarations for this ordering code. Use the manufacturer product page and its current material or environmental compliance documentation for the formal status. Automotive qualification is also not established, so AEC-Q100 status must remain unknown unless Microchip Technology provides a specific qualification record for the device.

Data referensi engineering untuk ATXMEGA64D3-MN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATXMEGA64D3-MN for a 32 MHz embedded-control design that needs 64 KB of ISP Flash, 2 KB of EEPROM, 4 KB of SRAM, a four-channel event system, and a 1.6 V to 3.6 V supply range in a 64-VFQFN package. It is particularly attractive when event-driven peripheral coordination, deterministic interrupt handling, and moderate firmware capacity matter more than maximum flash density. Choose ATXMEGA256D3-AU when substantially more memory is needed, but treat it as a new design option until package and pin compatibility are verified. Choose ATXMEGA64A1-CUR only after comparing its clock, memory, peripherals, package, and pin assignments against the complete system requirements. No drop-in substitute is recommended without a verified 64-pin footprint, matching lead functions, compatible electrical limits, and confirmed programming behavior.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Brand Microchip Technology
Package 64-VFQFN with exposed pad, 9 mm x 9 mm
Product Type 8/16-bit AVR XMEGA D3 microcontroller
Maximum Clock Frequency 32 MHz
Flash Memory 64 KB
EEPROM Memory 2 KB
SRAM 4 KB
Operating Voltage 1.6 V to 3.6 V
Event System 4 channels
Programmable Multi-Level Interrupt Logic Supported

Diferensiator Kunci

  • Balanced embedded-control resource set (vsATXMEGA64A1-CUR)
  • Event-driven peripheral coordination (vsATXMEGA256D3-AU)
  • Compact 64-VFQFN implementation (vsATXMEGA256D3-AU)

Catatan Desain

Use the manufacturer 64-VFQFN land pattern and exposed-pad geometry rather than a generic QFN footprint. Connect the exposed pad as directed in the package drawing, preserve the specified solder-mask and copper clearance, and place decoupling capacitors adjacent to the relevant supply pins. Adequate short power paths reduce inductive voltage excursions when the 32 MHz core and switching peripherals change state.

Assign communication, timer-sensitive, programming, and reset functions only after checking the pin-multiplexing matrix in the manufacturer data sheet. Keep crystal or clock paths short and return high-current outputs to suitable ground planes. Because peripheral functions can move between pins through configuration registers, document the final fuse and software settings alongside the schematic so the PCB and firmware remain synchronized.

Estimated: the regulator power loss depends on the selected supply voltage, core current, and peripheral activity, so calculate it from the actual operating mode rather than using a fixed dissipation value. Verify the minimum and maximum input voltage against the 1.6 V to 3.6 V device range, include startup margin for the internal clock and I/O loads, and confirm that the selected supply remains stable through clock transitions and peripheral activation.

Do not treat a related XMEGA ordering code as a drop-in replacement solely because it has a similar flash capacity. Verify the 64-pin package dimensions, exposed-pad assignment, pin names, alternate-function assignments, clock system, memory organization, boot configuration, and electrical limits. Also confirm that programming tools and boot logic support the replacement before releasing any substitute into production.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Distributor listings identify the device as green, but the exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations for this ordering code require confirmation from Microchip Technology.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ATXMEGA64D3-MN ATXMEGA64D3-MN datasheet ATXMEGA64D3-MN datasheet pdf ATXMEGA64D3-MN pinout ATXMEGA64D3-MN specifications ATXMEGA64D3-MN equivalent ATXMEGA64D3-MN replacement ATXMEGA64D3-MN cross reference ATXMEGA64D3-MN vs ATXMEGA256D3-AU ATXMEGA64D3-MN footprint ATXMEGA64D3-MN price ATXMEGA64D3-MN stock Microchip Technology ATXMEGA64D3-MN ATXMEGA64D3-MN application circuit ATXMEGA64D3-MN programming

Komponen dan Istilah Terkait

Microchip Technology ATXMEGA64D3-MN ATxmega64D3 ATXMEGA256D3-AU ATXMEGA64A1-CUR AVR XMEGA AVR XMEGA D3 8/16-bit microcontroller microcontroller embedded processor semiconductor ISP Flash EEPROM SRAM event system programmable multi-level interrupt logic read-while-write 64-VFQFN QFN family surface mount SMD exposed pad 32 MHz 1.6 V to 3.6 V industrial control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ