Broadcom

BCM55030B2KFBG - EPON ONU Processor | Broadcom Limited

MPN: BCM55030B2KFBG ✓ Active
TFBGA Package
MOQ: 1 |

BCM55030B2KFBG Overview

The Broadcom Limited BCM55030B2KFBG is a TK3715A EPON ONU processor with forward error correction, supplied in a lead-free TFBGA package. It is designed for optical network terminal equipment that terminates an EPON access network and connects the fiber-side service path to a customer Ethernet network. The device combines the TK3715A processor identity with integrated FEC capability in a compact surface-mount package.

An EPON ONU processor is an embedded semiconductor used in passive optical network equipment. Its role is to receive and process optical-access signals, support data-path functions, and interface with network-facing electronics. In the product hierarchy, the BCM55030B2KFBG is an embedded network controller and processor IC that belongs within an optical access terminal rather than a general-purpose microcontroller or conventional Ethernet PHY.

The manufacturer identifies the BCM55030B2KFBG as the TK3715A EPON ONU device with FEC. Forward error correction is significant in access networks because it allows a receiver to detect and correct selected transmission errors without retransmitting the affected data. Integrating FEC-related processing into the ONU processor supports the reliability requirements of PON equipment while maintaining a compact TFBGA implementation.

The package is identified as TFBGA with FEC and lead-free construction. TFBGA is a fine-pitch ball-grid-array package family intended for surface-mount assembly, and its compact footprint supports dense optical network terminal designs. Board layout, power delivery, thermal performance, and high-speed signal integrity require careful implementation because the exact pin assignment, ball map, and exposed thermal arrangement must be taken from the Broadcom manufacturer datasheet.

Typical uses include EPON fiber-to-the-home terminals, business access gateways, passive optical network customer-premises equipment, and other fiber-access products requiring an integrated ONU processing path. In these systems, selection depends on confirming the correct Broadcom firmware configuration, optical and electrical interfaces, reference design compatibility, thermal conditions, and package land pattern.

Before layout or firmware release, engineers should compare the complete Broadcom manufacturer datasheet and reference design with the target ONU platform. In particular, verify the ball assignments, supply rails, reset and boot requirements, memory interfaces, clocking, PHY integration, and recommended high-speed layout rules. These checks are more reliable than inferring functionality from the commercial description alone.

This page combines the identified device role, package description, compliance details, source listings, engineering considerations, and an explicit assessment of replacement evidence. It also separates confirmed drop-in alternatives from functional similarities so that sourcing decisions do not mistake an Ethernet PHY for a pin-compatible EPON processor replacement.

Drop-in alternatives for BCM55030B2KFBG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

BCM55030B2KFBG Maximum Ratings & Electrical Characteristics

Device Type EPON ONU processor and network controller IC
Processor Designation TK3715A
Primary Function EPON ONU processing
Forward Error Correction Supported with FEC
Product Category Embedded - Microcontrollers
Package Type TFBGA
Package Family TFBGA fine-pitch ball-grid-array surface-mount package
Assembly Type Surface mount
Lead Status Lead-free
RoHS Status Compliant
REACH Status Compliant

BCM55030B2KFBG tfbga fine-pitch ball-grid-array surface-mount package Pin Configuration Guide

Pin configuration for BCM55030B2KFBG (tfbga fine-pitch ball-grid-array surface-mount package package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

tfbga fine-pitch ball-grid-array surface-mount package package pinout diagram for BCM55030B2KFBG

No detailed pinout data available for BCM55030B2KFBG.

Refer to the datasheet for full pin configuration.

Typical Applications

BCM55030B2KFBG is suitable for 6 applications: EPON Fiber-to-the-Home Terminal, Passive Optical Network Customer Premises Equipment, Business Fiber Access Gateway, Optical Network Termination Controller, Fiber-to-Ethernet Media Gateway, Industrial Optical Access Terminal.

🌐

EPON Fiber-to-the-Home Terminal

The BCM55030B2KFBG fits an EPON fiber-to-the-home terminal because Broadcom identifies the device as a TK3715A EPON ONU processor with FEC. Its role is to support the network-facing processing path of a passive optical network terminal while the surrounding design handles the optical and electrical interfaces required by the service provider. Using the designated TK3715A platform simplifies identification of the firmware and reference design. The engineer must still verify the optical PHY selection, ball assignments, supply requirements, and clocking against the Broadcom manufacturer datasheet. The TFBGA package also requires a package-specific land pattern and layout that complies with the manufacturer’s high-speed and thermal guidance.

🏠

Passive Optical Network Customer Premises Equipment

The BCM55030B2KFBG is appropriate for customer-premises equipment built around an EPON access circuit because its published identity is a TK3715A EPON ONU processor with FEC. The processor can serve as the central application device for terminating the optical access network and coordinating the terminal’s data services. Integration should follow the approved Broadcom platform because the package description alone does not establish the optical interface arrangement, memory configuration, or boot requirements. Board designers should use the manufacturer ball map and reference schematic, provide clean supplies to all specified rails, and validate thermal performance in the compact enclosure expected of customer-premises equipment.

🏭

Business Fiber Access Gateway

A business fiber access gateway can use the BCM55030B2KFBG when the product is designed around Broadcom’s TK3715A EPON ONU platform. The processor identity provides a clear starting point for implementing access-side processing with FEC in equipment that bridges a fiber access service to enterprise-facing Ethernet interfaces. The value of this part lies in platform alignment rather than a generic microcontroller substitution. Before schematic release, confirm the required Ethernet interface count, supported firmware configuration, boot behavior, and vendor reference design. Because the device uses a fine-pitch TFBGA package, signal routing, decoupling, assembly yield, and thermal verification should be addressed early in the hardware schedule.

🔧

Optical Network Termination Controller

The BCM55030B2KFBG can serve as the controller element in an optical network termination design because it is expressly identified as an EPON ONU processor with FEC. This makes it relevant to access equipment that terminates a passive optical network and must handle the service-processing functions assigned to the ONU. The TK3715A designation should be retained throughout firmware, production documentation, and procurement records to avoid confusion with unrelated Broadcom network processors. Hardware planning must use the exact manufacturer package drawings and electrical characteristics. In particular, verify reset and startup behavior, interfaces to the optical and network PHYs, clock requirements, and thermal conditions before releasing a production layout.

📡

Fiber-to-Ethernet Media Gateway

The BCM55030B2KFBG is relevant to a fiber-to-Ethernet media gateway that accepts an EPON access signal and provides customer-facing connectivity. Its confirmed TK3715A EPON ONU identity and FEC capability distinguish it from a standalone Ethernet PHY, while the TFBGA package supports a compact implementation. The processor should be paired only with interfaces and reference circuitry approved for the selected Broadcom platform. Validate throughput, service mapping, firmware configuration, thermal load, and reset behavior through the manufacturer documentation and system testing. Layout work should account for the TFBGA escape routing and power-delivery requirements rather than assuming continuity with a generic Ethernet-controller footprint.

🏭

Industrial Optical Access Terminal

The BCM55030B2KFBG may be selected for an industrial optical access terminal that requires an EPON ONU processing path with FEC. The processor identity is suitable for equipment intended to bridge an optical access network into an industrial Ethernet segment, subject to confirmation of the complete Broadcom platform and environmental requirements. The lead-free TFBGA implementation aligns with high-density surface-mount assembly, but industrial product qualification still depends on the specified operating-temperature grade, EMC design, and long-term supply arrangements. Engineering teams should use the Broadcom manufacturer datasheet for electrical limits and ball assignments, match the approved reference firmware, and verify enclosure temperature, power integrity, and surge requirements at system level.

What is the BCM55030B2KFBG?
The BCM55030B2KFBG is a Broadcom Limited TK3715A embedded processor for EPON optical network units with forward error correction. It belongs to the network controller and processor category and is packaged in a lead-free TFBGA. According to the Broadcom manufacturer datasheet description, the TK3715A is the processor designation used for this EPON ONU implementation, allowing engineers to associate the orderable MPN with the correct firmware and reference-design platform.
Where can I download the BCM55030B2KFBG datasheet PDF?
The BCM55030B2KFBG datasheet can be accessed through the linked Broadcom product entry on Mouser, whose product record identifies the device as the TK3715A EPON ONU TFBGA with FEC. Use the manufacturer datasheet for the authoritative ball map, electrical characteristics, timing, and application information. The Broadcom manufacturer datasheet must be matched by the full BCM55030B2KFBG ordering code before its pin assignments or electrical limits are applied to a PCB design.
Where to buy BCM55030B2KFBG online?
Use the Request a Quote form on this page to request BCM55030B2KFBG availability, lot traceability, and a quotation for the exact ordering code. The BCM55030B2KFBG is actively listed by multiple authorized channels, but inventory and lead time can vary by quantity and package condition. Include the required quantity, target date, and whether a date-code-controlled or standard commercial shipment is acceptable when submitting the request.
What is the price of BCM55030B2KFBG?
The current BCM55030B2KFBG quotation is provided through the Request a Quote form on this page. The form supports quantity-specific sourcing without presenting a potentially stale figure for this specialized Broadcom processor. For an accurate commercial response, state the required quantity, acceptable lead time, shipment destination, and whether the order must include manufacturer traceability or date-code controls.
What is the lead time for BCM55030B2KFBG?
The current BCM55030B2KFBG lead time should be confirmed through the Request a Quote form on this page. Because the device is a specialized TK3715A EPON ONU processor, allocation can depend on factory inventory, required volume, and manufacturing conditions. A request including the target quantity and required delivery date allows the supply channel to confirm an appropriate schedule rather than relying on a generic stock estimate.
Is BCM55030B2KFBG in stock?
BCM55030B2KFBG availability is handled through the Request a Quote form on this page so that the response reflects the requested quantity and current allocation. Public product records identify the part as a catalogued Broadcom device, but warehouse quantity can change rapidly. For production planning, request confirmation of stock, lead time, package condition, and traceability rather than treating a general availability message as a guaranteed allocation.
What are the key specifications of BCM55030B2KFBG that engineers should know?
The BCM55030B2KFBG is identified as a TK3715A EPON ONU processor with FEC in a lead-free TFBGA package. Its commercial classification is an embedded microcontroller or network-controller IC, and the Broadcom manufacturer datasheet is the controlling document for electrical and timing details. The confirmed public identity also includes RoHS and REACH compliance. Pin count, voltage range, clock, memory, and temperature limits require direct confirmation from the manufacturer datasheet.
BCM55030B2KFBG vs BCM55040BB1IFSBG - which is better for an EPON ONU?
The BCM55030B2KFBG is the more directly identified choice for an EPON ONU because Broadcom identifies it specifically as the TK3715A EPON ONU processor with FEC. A comparison listing confirms that BCM55040BB1IFSBG is a different part, but it does not establish that the BCM55040 uses the same package, pinout, firmware interface, or electrical characteristics. Treat the BCM55040 as a comparison candidate rather than a drop-in replacement unless the manufacturer documents full compatibility.
What is the difference between BCM55030B2KFBG and BCM55040BB1IFSBG?
The BCM55030B2KFBG is explicitly described as a TK3715A EPON ONU processor with FEC in a TFBGA package. The available BCM55040BB1IFSBG information does not confirm its processor identity, package, ball map, electrical limits, or software compatibility. Accordingly, the functional purpose of the target is known, but a defensible parameter-by-parameter difference requires both manufacturer datasheets and should not be inferred from the names alone.
When should I choose BCM55030B2KFBG over BCM55040BB1IFSBG?
Choose the BCM55030B2KFBG when the design specifically targets the Broadcom TK3715A EPON ONU platform and its manufacturer reference design, firmware, and board layout are approved for that device. Choose the BCM55040BB1IFSBG only after its package, pinout, firmware requirements, electrical characteristics, and optical access functions have been confirmed equivalent. The available information supports the target's EPON ONU identity but does not establish direct interchangeability.
Is BCM55030B2KFBG suitable for a fiber-to-the-home terminal?
The BCM55030B2KFBG is suitable in principle for a fiber-to-the-home terminal because it is specifically identified as a TK3715A EPON ONU processor with FEC. Suitability for a complete product still depends on matching the required optical PHY, electrical interfaces, boot firmware, thermal environment, and Broadcom reference design. Use the manufacturer datasheet and platform documentation to confirm those system-level requirements before committing the TFBGA layout.
What can replace BCM55030B2KFBG?
A confirmed drop-in replacement for BCM55030B2KFBG was not established because no alternate part is documented with the same TFBGA ball map, pin functions, electrical limits, and TK3715A software interface. The BCM55040BB1IFSBG is a different Broadcom device, and functional Ethernet similarities do not make it a drop-in substitute. A production replacement should therefore be treated as a qualified redesign unless Broadcom documents pin-to-pin compatibility for a specific ordering code.
What is the best Microchip equivalent for BCM55030B2KFBG?
No Microchip equivalent can be recommended as a drop-in replacement for the BCM55030B2KFBG from the available cross-reference information. The target is a specialized TK3715A EPON ONU processor with FEC, while general-purpose Ethernet PHY products do not necessarily include the same optical-access processing, package, firmware, and digital interfaces. Treat any proposed alternative as a new platform qualification rather than a pin-compatible substitution.
Is BCM55030B2KFBG the same as BCM55040BB1IFSBG?
No evidence indicates that the BCM55030B2KFBG is electrically, mechanically, or software-identical to the BCM55040BB1IFSBG. They are separate Broadcom orderable MPNs, and the target is specifically identified as a TK3715A EPON ONU processor with FEC. Unless the manufacturer publishes matching package dimensions, ball assignments, supply rails, interface functions, and firmware requirements, the parts must be treated as different designs.
How do I verify the BCM55030B2KFBG pinout and PCB footprint?
Verify the BCM55030B2KFBG pinout against the ball map and land-pattern drawings in the Broadcom manufacturer datasheet for the exact ordering code. The package is identified as TFBGA, but the public product description does not provide the ball count or individual ball assignments. The PCB footprint, paste stencil, component placement, and high-speed routing must therefore follow the manufacturer drawings rather than a generic TFBGA footprint.

Engineering reference data for BCM55030B2KFBG — comparison, design guidance, and compliance information.

Selection Guide

Choose BCM55030B2KFBG when the product is specifically built around Broadcom’s TK3715A EPON ONU platform and the associated reference design, firmware, and optical-access architecture are approved. Its confirmed EPON ONU role and FEC implementation make it the defensible choice for a fiber access terminal, customer-premises equipment, or media gateway requiring that platform. Do not select BCM55040BB1IFSBG as a drop-in substitute without matching manufacturer documentation for the package, ball map, electrical characteristics, firmware interface, and access functions. The KSZ9031, DP83867, and 88E1111 products mentioned in general equivalence discussions are Ethernet PHYs rather than demonstrated EPON ONU processor replacements. A redesign around a different PHY may be technically possible, but it is not a component substitution and requires new hardware, firmware, and qualification work.

Comparison with Alternatives

Parameter This Product BCM55040BB1IFSBG
Brand Broadcom Limited Broadcom Limited
Drop-In Compatibility Target device Not established as drop-in compatible

Key Differentiators

  • Explicitly identified EPON ONU processor platform (vs BCM55040BB1IFSBG)
  • Documented forward-error-correction role (vs BCM55040BB1IFSBG)
  • Lead-free TFBGA implementation for dense access designs (vs BCM55040BB1IFSBG)

Design Notes

Use the exact Broadcom manufacturer land pattern and ball map for BCM55030B2KFBG rather than a generic TFBGA footprint. Confirm ball count, ball assignments, solder-mask and paste dimensions, and exposed-pad requirements from the package drawing before PCB release. Place the device so high-speed interfaces can follow the reference-design routing topology, and avoid introducing unnecessary loops or long escape paths on sensitive nets.

Build the power-delivery network from the manufacturer reference schematic and supply requirements. Place decoupling capacitors at the device pins with the shortest possible current paths, keep sensitive return currents continuous, and verify each rail during worst-case ONT activity. The public component description does not specify voltage limits, so an engineer must not infer rail values from package naming or use another Broadcom network processor’s supply table without checking the exact datasheet.

The BCM55030B2KFBG uses a compact TFBGA package suitable for dense access equipment, but the thermal pad and copper-exposure arrangement must follow the manufacturer drawing. Model junction temperature in the intended enclosure using the board copper available in production. Validate temperature rise under sustained data traffic and worst-case ambient conditions, then adjust copper, airflow, or enclosure heat paths rather than relying on qualification assumptions from a related device.

Do not substitute an Ethernet PHY or a differently named Broadcom processor solely because its networking functionality appears similar. The BCM55030B2KFBG is tied to the TK3715A EPON ONU platform, including its FEC implementation and firmware expectations. A production substitution must match the package, ball functions, electrical conditions, optical-access interface, and boot software. Treat any new part as a redesign until those requirements are demonstrated.

Compliance Information

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The product record identifies the BCM55030B2KFBG as lead-free and RoHS compliant. The product description also states that it is REACH compliant and uses halogen-free substrates, but a formal halogen-free declaration is not confirmed.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

BCM55030B2KFBG datasheet BCM55030B2KFBG pinout BCM55030B2KFBG datasheet pdf BCM55030B2KFBG equivalent BCM55030B2KFBG replacement BCM55030B2KFBG cross reference BCM55030B2KFBG vs BCM55040BB1IFSBG BCM55030B2KFBG footprint BCM55030B2KFBG price BCM55030B2KFBG stock Broadcom BCM55030B2KFBG BCM55030B2KFBG EPON ONU processor

Related Components & Terms

Broadcom Limited BCM55030B2KFBG TK3715A BCM55040BB1IFSBG EPON EPON ONU processor network controller and processor IC embedded microcontroller forward error correction FEC passive optical network fiber-to-the-home TFBGA ball-grid-array package surface mount lead-free packaging RoHS REACH optical network terminal Ethernet PHY
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details