ROHM Semiconductor

BD3181FVM-TR High-Side Current Sense Amp | ROHM

MPN: BD3181FVM-TR ✓ Active
8-MSOP Package
MOQ: 1 |

BD3181FVM-TR Overview

ROHM Semiconductor BD3181FVM-TR is a single-circuit, high-side current-sense amplifier packaged in an 8-pin MSOP. It belongs to the current-sense amplifier category within instrumentation amplifiers and is intended to measure small voltage differences across a current-shunt resistor. The amplifier converts the differential shunt voltage into an amplified output signal for measurement, control, protection, or monitoring systems.

A high-side current-sense amplifier is a specialized analog amplifier used when a load current must be measured without disconnecting the power path. Its place in the signal chain is sensor interface, instrumentation amplifier, analog signal conditioner, and power management IC. Placing the amplifier on the high side of the shunt keeps the measured node near ground potential, which can simplify grounding and improve system-level noise immunity in many power-control applications.

The BD3181FVM-TR includes one amplifier circuit and uses an 8-MSOP package for compact surface-mount layouts. Its high-side architecture supports battery-powered, industrial-control, motor-control, power-supply, and energy-monitoring systems where load-current feedback is required. The MSOP format also provides a defined lead arrangement for automated assembly, although the exact pin functions and exposed thermal-pad arrangement must be assigned from the manufacturer pin-description table before PCB routing is released.

The BD3181FVM family is identified in the manufacturer documentation as a high-side current-sense amplifier family. Because it is intended for measuring differential voltage generated by a shunt, the practical accuracy depends on shunt resistance, amplifier gain, common-mode operating range, offset behavior, supply voltage, and the stability of the reference node. These operating limits must be checked against the complete manufacturer datasheet before the device is used outside its stated conditions.

Typical uses include DC motor current feedback, industrial power-module monitoring, battery charge control, regulated power-supply protection, solenoid-current measurement, and programmable-load monitoring. In each case, the shunt converts current into a differential voltage, while the amplifier conditions that voltage for an analog-to-digital converter, comparator, or controller. The external shunt value must be selected to keep the differential input within the amplifier's specified range while producing an adequate signal at the output.

For PCB design, place the shunt and current-sense amplifier close together so that the two shunt terminals connect directly to the amplifier input pins with minimal loop area. Keep high-current paths separate from sensitive input and output routing, use a quiet ground reference, and decouple the amplifier supply close to its supply pin. These practices reduce offset error and susceptibility to switching-node interference.

This product page combines the exact BD3181FVM-TR identity, package information, application guidance, design considerations, and validated sourcing fields to support faster component selection and PCB planning. For a release-ready design, use the ROHM Semiconductor datasheet and pin-description table to confirm electrical limits, gain options, pin assignments, and recommended application circuitry.

Drop-in alternatives for BD3181FVM-TR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

BD3181FVM-TR Maximum Ratings & Electrical Characteristics

Product Type High-side current-sense amplifier
Amplifier Circuit Count 1 circuit
Package 8-MSOP
Total Pin Count 8 pins
Mounting Type Surface mount
Input Architecture High-side current sensing
Shipping Format Tape and reel

BD3181FVM-TR 8-msop Pin Configuration Guide

Pin configuration for BD3181FVM-TR (8-msop package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-msop package pinout diagram for BD3181FVM-TR

No detailed pinout data available for BD3181FVM-TR.

Refer to the datasheet for full pin configuration.

Typical Applications

BD3181FVM-TR is suitable for 6 applications: DC Motor Current Feedback, Industrial Power-Supply Monitoring, Battery Charge and Discharge Control, Solenoid and Actuator Current Measurement, Programmable DC Load and Bench Supply, Battery-Powered Equipment Current Limit.

🏭

DC Motor Current Feedback

The BD3181FVM-TR fits a DC motor-control loop that requires the controller to measure armature or supply current without placing a high-voltage sense node at the motor-return ground. A shunt in the motor supply converts current into differential voltage, and the BD3181FVM-TR amplifies that voltage for an analog-to-digital converter or comparator. The designer must choose the shunt so that the maximum motor current remains inside the amplifier's common-mode and input limits, then filter the output for PWM-related switching noise. Because this part provides one amplifier circuit in an 8-MSOP package, it is particularly useful where compact placement, low burden voltage, and simple high-side monitoring are priorities.

⚡

Industrial Power-Supply Monitoring

The BD3181FVM-TR can provide the current-measurement element in an industrial power module that monitors a DC output bus, actuator feed, or distributed supply branch. The shunt should be placed in the high-side conductor so that the amplifier measures the small differential voltage generated by load current. The resulting output can support telemetry, overload indication, or adaptive power control. Layout is critical because the sensed difference can be much smaller than surrounding supply noise; keep the Kelvin connections short, isolate them from switching-current paths, and confirm the common-mode range across the complete input-bus operating range before committing the design.

🔋

Battery Charge and Discharge Control

The BD3181FVM-TR is applicable to battery systems that require continuous current feedback during charging, discharge, or both. A high-side shunt keeps the measured voltage close to the system ground, which can simplify the amplifier's reference arrangement. The shunt must be selected to balance measurement resolution against conduction loss and heat generation, while the amplifier's supply and common-mode ratings must cover the battery's full voltage range. Designers should also account for transient current at load connection and define output filtering so that a brief inrush event does not incorrectly trigger protection or control decisions.

🔧

Solenoid and Actuator Current Measurement

The BD3181FVM-TR can monitor current through a solenoid, valve, relay, or electromechanical actuator when the control system needs a linear representation of coil current. Measuring on the high side keeps the sense amplifier near the power-return reference and enables closed-loop current control or jam detection. The shunt resistance should produce a signal that uses the amplifier's output range efficiently at the highest expected current without violating its input limits. Add protection against inductive voltage spikes and route the shunt connections as a dedicated pair so actuator switching transients do not couple into the measurement signal.

🖥️

Programmable DC Load and Bench Supply

The BD3181FVM-TR fits programmable DC loads and bench power supplies where the controller must measure output current across a broad operating range. The part's high-side measurement approach permits the shunt to remain in the positive output path while the amplifier reports a ground-referenced voltage. For accurate test results, use a shunt with suitable resistance, power rating, and temperature coefficient, and verify amplifier offset and gain error during calibration. Place the amplifier close to the shunt and keep switching-regulator loops and high-current output conductors physically separated from the differential input route to minimize measurement error.

📱

Battery-Powered Equipment Current Limit

The BD3181FVM-TR can support current-limit supervision in battery-powered equipment where the system must distinguish normal load current from an excessive draw. The high-side shunt provides a proportional measurement without interrupting the load path, while the amplifier output can drive a comparator or ADC channel. Because the device has one amplifier circuit in an 8-MSOP package, it enables a compact implementation in portable instruments and energy-harvesting equipment. The system designer must verify the amplifier supply range, quiescent demand, common-mode margin, and output behavior during battery discharge before using it as the sole protection element.

What is the BD3181FVM-TR?
The BD3181FVM-TR is a single-circuit, high-side current-sense amplifier from ROHM Semiconductor in an 8-MSOP package. According to the ROHM Semiconductor datasheet, it is intended to amplify the small differential voltage produced across a current-shunt resistor. It is suitable for current feedback, protection, and monitoring functions in compact surface-mount analog circuits.
What is the operating voltage range of the BD3181FVM-TR?
The BD3181FVM-TR operates from the supply-voltage limits specified by ROHM Semiconductor for the BD3181FVM family. The exact minimum and maximum supply voltages are [DATA_NEEDED: supply voltage range]. Confirm those limits against the manufacturer datasheet for operating conditions, absolute maximum ratings, and decoupling requirements before applying power to the device.
Where can I download the BD3181FVM-TR datasheet PDF?
The BD3181FVM-TR datasheet is available through the ROHM Semiconductor BD3181FVM datasheet link on this page. It contains the device description, electrical characteristics, application information, and pin descriptions for the 8-MSOP package. Use the manufacturer document to verify gain, supply voltage, common-mode range, thermal limits, and the recommended current-sense circuit.
Where can I find the BD3181FVM-TR pinout?
The BD3181FVM-TR pinout is defined by the pin-description table in the ROHM Semiconductor BD3181FVM datasheet. The component uses an 8-MSOP package, but the manufacturer document must be used to assign each lead to input, output, supply, ground, or another function. Do not infer pin assignments from package shape alone because the exact lead numbering must match the datasheet.
How does a high-side current-sense amplifier work?
A high-side current-sense amplifier measures the differential voltage developed across a shunt resistor placed in the high-side current path. The BD3181FVM-TR amplifies this small voltage relative to ground and presents a scaled output for an ADC, comparator, or controller. According to the ROHM Semiconductor datasheet, the device is specifically categorized as a high-side current-sense amplifier.
What are the key specifications of the BD3181FVM-TR that engineers should know?
The BD3181FVM-TR is a ROHM Semiconductor high-side current-sense amplifier with one amplifier circuit in an 8-MSOP surface-mount package. Its principal design parameters are differential shunt-voltage sensing, supply voltage, common-mode range, gain, offset voltage, output swing, and operating temperature. Use the complete manufacturer electrical-characteristics table before selecting the shunt resistance or setting the measurement range.
What shunt resistor should be used with the BD3181FVM-TR?
Choose the BD3181FVM-TR shunt so that the largest expected current produces a differential voltage inside the amplifier's specified common-mode and input range while remaining below its absolute maximum limits. The required shunt resistance also depends on the device gain and the usable ADC input range. Because those numerical limits are [DATA_NEEDED: gain, common-mode input voltage range, and absolute maximum input voltage], use the manufacturer datasheet for the final calculation.
Can the BD3181FVM-TR be used for motor-current monitoring?
The BD3181FVM-TR can be used for motor-current monitoring when the motor current, shunt drop, supply voltage, and ambient temperature stay within the manufacturer's specified limits. Place the shunt in series with the motor supply and connect the amplifier's differential inputs directly across it. Filter the output appropriately for noise immunity, and verify settling behavior against the motor-control loop requirements.
Is the BD3181FVM-TR suitable for battery-powered systems?
The BD3181FVM-TR can be suitable for a battery-powered current-monitoring circuit if its supply-voltage and common-mode limits cover the battery system's operating range. Its quiescent current and shutdown behavior must also be compared with the power budget because those values are [DATA_NEEDED: quiescent current and shutdown characteristics]. Account for the shunt's continuous power loss when sizing the system.
Where can I buy the BD3181FVM-TR online?
Use the Request a Quote form on this page to request the BD3181FVM-TR, current quantity, target quantity, and required delivery information. The form is the direct route for current commercial availability, lead time, and order handling. MOQ and production lead time are [DATA_NEEDED: minimum order quantity and manufacturer lead time].
What is the price of the BD3181FVM-TR?
Current commercial terms for the BD3181FVM-TR are obtained through the Request a Quote form on this page. The form accepts the required quantity and lets the supply team respond with current pricing and availability. A static price figure should not be used for budgeting because component pricing and inventory conditions change with order quantity and market conditions.
What is the lead time for the BD3181FVM-TR?
The current BD3181FVM-TR lead time depends on order quantity, inventory position, and manufacturing conditions. Submit the required quantity and target date through the Request a Quote form on this page for a current schedule. The manufacturer-specific lead time is [DATA_NEEDED: manufacturer lead time], so do not base production planning on an unconfirmed interval.
Is the BD3181FVM-TR in stock?
Current BD3181FVM-TR stock status should be requested through the Request a Quote form on this page, including the required quantity and delivery date. The form provides the appropriate route for confirming availability and order handling without relying on a potentially stale inventory listing. Both stock and the minimum order quantity are [DATA_NEEDED: current stock and minimum order quantity].
What can replace the BD3181FVM-TR?
A valid replacement for the BD3181FVM-TR must use the same 8-MSOP footprint, preserve the exact pin arrangement, and meet the required gain, common-mode range, supply voltage, offset, and output-swing limits. No confirmed drop-in substitute was identified in the cross-reference research for this exact MPN. Do not choose a candidate by package similarity alone; request a component cross-reference and compare it with the manufacturer datasheet before changing the PCB.
Is the BD3181FVM-TR the same as the BD3181FVM?
The BD3181FVM-TR and BD3181FVM belong to the same ROHM Semiconductor BD3181FVM family and are associated with the same 8-MSOP current-sense-amplifier family, but the ordering suffix identifies a specific supplied configuration. The -TR suffix denotes the tape-and-reel ordering form. Before substituting one listing for another, confirm the manufacturer ordering code, package, pinout, temperature grade, and electrical limits.
How should the BD3181FVM-TR PCB be laid out?
Place the BD3181FVM-TR close to the current-shunt resistor and connect the differential inputs with short, symmetric traces directly across the shunt pads. Keep the high-current path away from the input and output traces, provide local supply decoupling, and use a low-impedance ground return. According to the ROHM Semiconductor application guidance, careful shunt placement and trace routing are central to preserving current-sense accuracy.
Does the BD3181FVM-TR meet RoHS and automotive qualification requirements?
The RoHS, REACH, and AEC-Q100 status of the BD3181FVM-TR must be confirmed for the exact ordering code and manufacturer documentation. These fields are [DATA_NEEDED: RoHS status, REACH status, and AEC-Q100 qualification status]. For an automotive design, require explicit AEC-Q100 qualification rather than assuming that an industrial current-sense amplifier is automotive qualified.

Engineering reference data for BD3181FVM-TR — comparison, design guidance, and compliance information.

Selection Guide

Choose the BD3181FVM-TR when the design requires a compact, single-channel, high-side current-sense amplifier in an 8-MSOP package. It is a practical fit for motor, actuator, battery, and industrial power-supply monitoring when the measured current, shunt voltage, common-mode range, and amplifier supply remain within the manufacturer limits. A general-purpose operational amplifier may offer broader configuration flexibility, but it does not provide the same integrated high-side current-sense function. A multi-channel current-sense amplifier is preferable when several independent loads must be monitored. No confirmed drop-in replacement was identified for the exact ordering code, so any candidate must be checked for identical pinout, package, gain, common-mode range, offset, output swing, and supply voltage rather than being selected from family name or package size alone.

Comparison with Alternatives

Parameter This Product
Product Type High-side current-sense amplifier
Brand ROHM Semiconductor
Package 8-MSOP
Amplifier Circuit Count 1 circuit
Total Pin Count 8 pins
Mounting Type Surface mount

Key Differentiators

  • Purpose-built high-side measurement in a compact package (vs General-purpose operational amplifier)
  • Small-package surface-mount implementation (vs Larger instrumentation-amplifier package)
  • Single-circuit architecture for focused designs (vs Multi-channel current-sense amplifier)

Design Notes

Place the BD3181FVM-TR next to the shunt and connect the differential inputs directly to the shunt terminals with short, symmetric traces. Avoid routing the sensitive input pair alongside a high-current conductor or switching-node copper. A compact Kelvin-style connection reduces parasitic resistance and inductance, limits input offset caused by trace resistance, and improves rejection of common-mode switching noise.

Use a dedicated ground return for the amplifier, shunt, and measurement system instead of allowing sense current to flow through a shared return path. Ground potentials that appear between the shunt and amplifier inputs become measurement error because the part senses a difference between two nodes. Check the assembled PCB for unintended copper loops and keep the high-current path spatially separated from the amplifier and its reference connections.

Select the shunt resistance from the maximum expected current, amplifier input range, allowable power dissipation, and desired measurement resolution. The shunt's continuous dissipation is estimated as I²R, while its temperature rise must remain within the resistor's rating. Validate this calculation against the amplifier's common-mode limits because a larger shunt improves signal resolution but reduces the remaining input-voltage margin.

Do not determine the BD3181FVM-TR pin functions from visual package orientation alone. Use the pin-description table in the ROHM Semiconductor datasheet, then verify the differential input polarity, output pin, supply pins, and ground connection against the PCB netlist. Also confirm that the selected output reference is compatible with the ADC, comparator, or controller input to avoid incorrect readings or output saturation.

Current-sense signals are often small and can be affected by PWM edges, relay transients, and magnetic fields. Keep the shunt-current loop compact, use a continuous reference plane, and apply filtering only after accounting for the bandwidth required by the control loop. If an RC filter is added at the output, recalculate its effect on transient response rather than selecting a cutoff based only on nominal output noise.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance attributes were not confirmed for the exact BD3181FVM-TR ordering code. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status require confirmation from ROHM Semiconductor.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

BD3181FVM-TR datasheet BD3181FVM-TR pinout BD3181FVM-TR datasheet pdf BD3181FVM-TR equivalent BD3181FVM-TR replacement BD3181FVM-TR drop-in replacement BD3181FVM-TR 8-MSOP package BD3181FVM-TR high-side current sensing BD3181FVM-TR application circuit BD3181FVM-TR price BD3181FVM-TR stock ROHM BD3181FVM-TR

Related Components & Terms

ROHM Semiconductor BD3181FVM-TR BD3181FVM high-side current-sense amplifier current-sense amplifier instrumentation amplifier analog signal conditioner current-shunt resistor high-side current sensing power management IC surface-mount semiconductor 8-MSOP package MSOP family differential voltage common-mode voltage input offset voltage gain bandwidth product motor-current feedback industrial power monitoring battery charge control solenoid current measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details