Silicon Labs

C8051F380-GQ 8-Bit 48 MIPS 64KB Flash MCU | Silicon Labs

MPN: C8051F380-GQ ✓ Active
2.7 V to 5.25 V Vdss 48-pin TQFP (7 x 7 mm) Package 50 MHz Speed 64KB (64K x 8) Memory
MOQ: 1 |

C8051F380-GQ Overview

Silicon Labs C8051F380-GQ is an 8-bit C8051F38x full-speed USB flash microcontroller operating at 48 MIPS, with 64KB of flash memory, and housed in a 48-pin TQFP package measuring 7 x 7 mm. It is designed for embedded USB 2.0 control, industrial peripherals, data acquisition, and USB-connected equipment.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one component. The C8051F38x family combines the 8051 instruction set with enhanced clocking, USB connectivity, analog peripherals, and flash-based program storage. USB device control is an important feature for applications requiring direct connection to a host computer without a separate interface controller.

The C8051F380-GQ provides 48 MIPS execution performance, 64KB of flash memory, full-speed USB operation at 12 Mbps or low-speed operation at 1.5 Mbps, and USB 2.0-compliant operation. Family features include two comparators, a brown-out detector, power-on reset circuitry, a built-in temperature sensor, an external conversion-start input option, and an internal voltage reference for designated C8051F38x devices.

The 8051-compatible architecture supports familiar embedded control workflows while the integrated USB function controller reduces the component count in peripheral designs. The port I/O and reset pins accept input signals up to 5 V, which can simplify interfacing with 5 V-tolerant digital peripherals. The C8051F38x family is offered in 48-pin TQFP, 32-pin LQFP, and 32-pin QFN configurations, allowing package selection according to board-area and assembly requirements.

Typical applications include USB-connected measurement instruments, data loggers, industrial control modules, serial protocol bridges, test equipment, and compact USB peripheral products. In each case, the MCU can execute control logic, acquire analog inputs, operate timers and communication peripherals, and enumerate as a USB device from a single integrated component.

PCB design should follow the manufacturer pin-description and recommended decoupling guidance. Place the crystal or clock circuitry close to the relevant device pins, route USB D+ and D- as a controlled-impedance differential pair, and provide a clean ground return for the analog and digital sections. Confirm the exact package pin assignments and programming configuration against the C8051F38x datasheet before releasing a layout.

This product page combines the exact C8051F380-GQ ordering information, family-level USB and analog capabilities, package details, comparison parameters, drop-in family alternatives, and practical implementation guidance to support faster component selection and board bring-up.

Drop-in alternatives for C8051F380-GQ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with C8051F380-GQ (same form factor and footprint) — differing in Package, Product Type, Flash Memory, Maximum Clock Frequency, Pin Count.

Silicon Labs
Package: TQFP-64, 10 mm x 10 mm
Product Type: 8-bit mixed-signal microcontroller
Flash Memory: 32 KB (32K x 8)
Compare with C8051F380-GQ →
Silicon Labs
Package: 32-LQFP, 7 x 7 mm
Product Type: 8-bit Flash Microcontroller
Flash Memory: 64 KB
Compare with C8051F380-GQ →
Silicon Labs
Product Type: 8-bit Flash USB Microcontroller
Compare with C8051F380-GQ →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Product Type: 8-bit 8051 CISC microcontroller
Pin Count: 48 pins
Compare with C8051F380-GQ →

C8051F381-GQ

✅ Drop-In ⚠️ Specs Unverified
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
8-bit Flash Microcontroller · 8051 · C8051F38x · 50 MHz · 48 MIPS · 64 KB · 64K x 8 bits · 4.25 KB

Contact for price

View Datasheet →

C8051F382-GQ

✅ Drop-In ⚠️ Specs Unverified
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
8-bit Flash USB Microcontroller · C8051F38x · 8051-compatible CISC · 50 MHz · 48 MIPS · 32 KB (32K x 8 bits) · 2.25K x 8 bits · Full-speed USB

Contact for price

View Datasheet →

C8051F384-GQ

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
8-bit 8051 CISC microcontroller · C8051F38x · 48 MIPS · 48 MHz · 64KB (64K x 8) · 4.25K x 8 · 2.7 V to 5.25 V · 2.5 V or 3.3 V

Contact for price

View Datasheet →

C8051F385-GQ

✅ Drop-In ⚠️ Specs Unverified
📦 48-pin TQFP (7 x 7 mm)
Same 48-pin TQFP footprint and C8051F38x family architecture; memory and peripheral configuration can vary by up to 20% from the C8051F380-GQ.

📋 Reference alternative (not in catalog)

C8051F387-GQ

✅ Drop-In ⚠️ Specs Unverified
📦 48-pin TQFP (7 x 7 mm)
Same 48-pin TQFP footprint and C8051F38x USB microcontroller family; device-specific memory and peripheral resources differ by up to 20%.

📋 Reference alternative (not in catalog)

C8051F380-GQ Maximum Ratings & Electrical Characteristics

Microcontroller Type 8-bit 8051-compatible flash MCU
Maximum CPU Performance 48 MIPS
Flash Memory 64KB (64K x 8)
Maximum Clock Frequency 50 MHz
Operating Supply Voltage 2.7 V to 5.25 V
USB Specification USB 2.0 compliant
USB Operating Speed 12 Mbps full speed or 1.5 Mbps low speed
Integrated USB Function Controller Yes
Comparator Count 2
Built-in Temperature Sensor Yes
External Conversion Start Input Yes
Internal Voltage Reference Yes for C8051F380/1/2/3/C devices
Brown-out Detector Yes
Power-on Reset Circuitry Yes
Port I/O and Reset Input Tolerance Up to 5 V
Package 48-pin TQFP (7 x 7 mm)
Mounting Type Surface mount

C8051F380-GQ 48-pin tqfp (7 x 7 mm) Pin Configuration Guide

Pin configuration for C8051F380-GQ (48-pin tqfp (7 x 7 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

48-pin tqfp (7 x 7 mm) package pinout diagram for C8051F380-GQ

No detailed pinout data available for C8051F380-GQ.

Refer to the datasheet for full pin configuration.

Typical Applications

C8051F380-GQ is suitable for 6 applications: USB Data Logger, Industrial Protocol Bridge, USB Measurement Instrument, USB Security and Access Peripheral, Programmable Test and Control Module, USB Sensor Interface Hub.

🖥️

USB Data Logger

The C8051F380-GQ fits a USB data logger because its 48 MIPS 8051-compatible core can supervise acquisition and storage logic while the integrated USB 2.0 function controller handles communication with a host. Its 64KB flash supports firmware, configuration data, and compact local buffering, while two comparators can implement threshold detection around sensor outputs. The 48-pin TQFP also provides sufficient I/O for sensor conditioning, status indication, and external storage control. Implement USB D+ and D- as a controlled-impedance differential pair and verify enumeration timing and current limits in the final design.

🏭

Industrial Protocol Bridge

The C8051F380-GQ is appropriate for an industrial protocol bridge where USB connects to an embedded equipment network. At up to 48 MIPS, the core can service protocol timing, packet processing, and host communication concurrently, while 64KB of flash holds application code and lookup tables. The supply range of 2.7 V to 5.25 V supports integration with both 3.3 V and 5 V system rails, and the port and reset inputs tolerate signals up to 5 V. Industrial qualification still requires checking transient immunity, grounding, isolation, and operating-temperature requirements for the deployed enclosure.

🧩

USB Measurement Instrument

The C8051F380-GQ can serve as the control and USB interface in a portable measurement instrument. Its two comparators are useful for direct thresholding, while the built-in temperature sensor supports board-level monitoring; the internal voltage reference is available for designated C8051F38x devices. The 48 MIPS processing rate leaves capacity for calibration, filtering, and user-interface updates without requiring a separate high-performance MCU. Design the analog front end independently from the digital ground return, apply filtering to sensor inputs, and confirm ADC-related requirements in the family datasheet before selecting the device.

🔒

USB Security and Access Peripheral

The C8051F380-GQ can provide control, authentication coordination, and USB connectivity in a compact security accessory. Its dedicated USB function controller supports 12 Mbps full-speed or 1.5 Mbps low-speed operation, which is appropriate for keyboards, readers, credential devices, and other low-bandwidth peripherals. The 64KB flash capacity provides room for firmware and configuration storage, and the brown-out detector and power-on reset support reliable startup. Security-sensitive designs should add appropriate external protection, validate firmware update procedures, and isolate sensitive analog or communication paths according to the product threat model.

🔧

Programmable Test and Control Module

The C8051F380-GQ is suitable for a programmable test module that combines stimulus generation, response monitoring, and USB-based configuration. Its 48 MIPS execution capability supports deterministic control tasks, while 64KB of flash accommodates firmware, calibration tables, and test sequences. Two comparators can provide fast threshold events, and the 50 MHz maximum device clock supports divided timer and communication-clock configurations. For repeatable measurements, connect analog and digital returns carefully, provide local decoupling at each supply pin, and use the manufacturer timing diagrams to establish clock and peripheral operating margins.

🧩

USB Sensor Interface Hub

The C8051F380-GQ can act as the local controller and USB interface for a multi-sensor device. The 8051-compatible core handles sensor polling, configuration, and data formatting, while the integrated USB controller transfers results to a computer. Its 2.7 V to 5.25 V operating range supports common embedded rails, and 5 V-tolerant port and reset inputs improve interface flexibility with external logic. Keep sensor analog traces away from USB clock and differential data paths, provide local bypass capacitance, and validate each sensor's voltage and timing requirements before finalizing the pin assignment.

Recommended Products Summary

What are the key specifications of C8051F380-GQ that engineers should know?
The C8051F380-GQ is an 8-bit flash microcontroller with 48 MIPS performance, 64KB of flash memory, a maximum clock frequency of 50 MHz, and USB 2.0 device connectivity. It is packaged in a 48-pin TQFP measuring 7 x 7 mm. According to the Silicon Labs C8051F38x datasheet, the device also includes two comparators, brown-out detection, power-on reset, a temperature sensor, and 5 V-tolerant port and reset inputs.
What is the C8051F380-GQ used for?
The C8051F380-GQ is used in embedded products that need local control logic and direct USB connectivity. Its 48 MIPS 8051-compatible core, 64KB flash memory, two comparators, and USB function controller suit data loggers, protocol converters, measurement instruments, and industrial peripheral controllers. The integrated USB controller can operate at 12 Mbps full speed or 1.5 Mbps low speed, allowing connection to a USB host without a separate USB interface device.
Where can I download the C8051F380-GQ datasheet PDF?
The official C8051F38x family datasheet is available from Silicon Labs at the product's manufacturer PDF link. It covers the C8051F380/1/2/3/4/5/6/7/C family and includes device selection information, electrical characteristics, USB operation, analog peripherals, and package details. Use that document for authoritative pin assignments, timing limits, programming information, and board-layout requirements before beginning a C8051F380-GQ design.
Where can I find the C8051F380-GQ pinout?
The C8051F380-GQ pinout is documented in the Silicon Labs C8051F38x datasheet under the device pin-description tables. The exact TQFP pin numbers must be assigned using the C8051F380-GQ section, including supply, ground, reset, clock, port, analog, and USB connections. Because the complete numbered table is not reproduced on this page, use the manufacturer pin-description table when assigning PCB tracks rather than relying on a generic package diagram.
How do I program a C8051F380-GQ microcontroller?
Program the C8051F380-GQ through a Silicon Labs-compatible programming interface that supports the C8051F38x family's flash programming method and programming algorithm. The exact adapter, connector, and software configuration must match the target board's debug and programming connections. Review the C8051F38x programming documentation and the device's security configuration requirements before designing the production programming fixture.
Can the C8051F380-GQ be used with a 5 MHz oscillator?
The C8051F380-GQ is specified for operation up to 50 MHz, so a 5 MHz oscillator can be used when the timing, baud rate, and USB requirements are generated correctly from that reference. However, the clock source, divider settings, and USB operating conditions must satisfy the C8051F38x datasheet. Use a 5 MHz source when it provides the required system timing without compromising USB communication or peripheral clock accuracy.
What is the difference between C8051F380-GQ and C8051F382-GQ?
The C8051F380-GQ and C8051F382-GQ belong to the same C8051F38x family and are associated with the 48-pin TQFP configuration. Their device-specific feature sets must be compared in the family datasheet before selecting one as a replacement. The C8051F380-GQ is the specified 64KB-flash, 48 MIPS device, while C8051F382-GQ may provide different analog or timing resources even though the package family is comparable.
Is C8051F380-GQ suitable for a USB data logger?
The C8051F380-GQ is suitable for a USB data logger because it combines an 8-bit control core running at 48 MIPS with 64KB flash and an integrated USB 2.0 function controller. The two comparators and internal voltage reference can assist threshold measurement and signal conditioning support. Practical suitability also depends on sensor interface requirements, data-buffer capacity, power budget, and the USB host environment.
What is the best drop-in replacement for C8051F380-GQ?
The closest replacements are 48-pin TQFP members of the Silicon Labs C8051F38x family, provided the selected device has the same pin arrangement and required peripherals. C8051F381-GQ, C8051F382-GQ, and C8051F384-GQ are relevant family candidates, but firmware and hardware qualification must confirm USB, analog, timing, and memory requirements. A same-package listing alone does not guarantee that every peripheral function is interchangeable.
What can replace C8051F380-GQ?
A replacement should be selected from the C8051F38x family in the identical 48-pin TQFP configuration, with compatible supply voltage, clocking, USB behavior, flash capacity, and peripheral assignments. C8051F381-GQ, C8051F382-GQ, and C8051F384-GQ can serve as evaluation candidates, while the C8051F38C-GQ is not footprint-compatible because it uses a 32-pin LQFP package. Validate the exact pin and peripheral differences before production use.
C8051F380-GQ vs C8051F384-GQ: which is better for an industrial controller?
Choose C8051F380-GQ when its 64KB flash capacity, 48 MIPS performance, and listed USB and analog features satisfy the design. Evaluate C8051F384-GQ when that member provides a needed device-specific feature or resource. Both are associated with the 48-pin TQFP C8051F38x family, so the final decision should be based on the family datasheet comparison and the controller's timing, analog, memory, and peripheral requirements.
When should I choose C8051F380-GQ over another C8051F38x member?
Choose C8051F380-GQ when the design specifically needs its 64KB flash configuration, 48 MIPS performance, 48-pin TQFP footprint, USB function controller, two comparators, and listed internal reference support. Select another family member only when an alternative offers a required differentiated feature while retaining the same electrical, timing, peripheral, and pin arrangement. This avoids replacing a working device without accounting for software and board-level compatibility.
Is the C8051F380-GQ a drop-in replacement for C8051F38C-GQ?
The C8051F380-GQ is not a drop-in replacement for C8051F38C-GQ because the parts use different packages. The C8051F380-GQ is specified in a 48-pin TQFP package, whereas the C8051F38C-GQ is listed in a 32-pin LQFP package. The C8051F38C-GQ also has 16KB of flash rather than the C8051F380-GQ's 64KB, so both footprint and firmware capacity prevent direct substitution.
Where can I buy C8051F380-GQ online?
Use the Request a Quote form on this page to request C8051F380-GQ availability, lead time, order quantity, and a current quotation. The part is an 8-bit, 48 MIPS, 64KB-flash MCU in a 48-pin TQFP package, so confirm that the quoted ordering code is specifically C8051F380-GQ rather than a related C8051F38x member. The form allows sourcing without relying on stale catalog pricing.
What is the price of C8051F380-GQ?
The current C8051F380-GQ quotation is generated through the Request a Quote form on this page. Submit the required quantity, shipment destination, and target date to receive a current response. The device is a 48-pin TQFP C8051F38x MCU with 64KB flash and 48 MIPS performance, so its ordering code should remain unchanged when requesting the quotation.
What is the lead time and stock status for C8051F380-GQ?
Request the current stock status, minimum order quantity, lead time, and scheduled delivery date through the Request a Quote form on this page. Lead time can vary with quantity and market conditions, so a current sourcing response is more useful than a static listing claim. Include the exact C8051F380-GQ ordering code and your required delivery schedule in the request.

Engineering reference data for C8051F380-GQ — comparison, design guidance, and compliance information.

Selection Guide

Choose the C8051F380-GQ for a compact 8-bit USB controller that requires 64KB flash, processing performance up to 48 MIPS, and a 48-pin TQFP footprint. It is a strong fit for data loggers, test modules, protocol bridges, sensor interfaces, and low-bandwidth USB peripherals. Consider C8051F381-GQ or C8051F382-GQ when a closely related family member provides a required differentiated peripheral, but verify pin assignments and firmware compatibility. C8051F384-GQ is another 48-pin TQFP candidate with 64KB flash and 48 MIPS performance; use it when its device-specific resources better match the design. C8051F385-GQ and C8051F387-GQ remain evaluation candidates within the same package family. Do not choose C8051F38C-GQ as a drop-in alternative because it has a 32-pin LQFP package and only 16KB of flash. For every replacement, verify USB mode, clock requirements, memory map, analog resources, package dimensions, and pin-specific functions against the C8051F38x datasheet.

Comparison with Alternatives

Parameter This Product C8051F381-GQ C8051F382-GQ C8051F384-GQ C8051F385-GQ C8051F387-GQ
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm)
USB Controller Integrated USB 2.0 function controller Integrated USB function controller Integrated USB function controller Integrated USB function controller Integrated USB function controller Integrated USB function controller
USB Maximum Speed 12 Mbps full speed 12 Mbps full speed 12 Mbps full speed 12 Mbps full speed 12 Mbps full speed 12 Mbps full speed

Key Differentiators

  • Higher flash capacity than the 32-pin C8051F38C-GQ family member (vs C8051F38C-GQ)
  • Larger 48-pin TQFP interface than C8051F38C-GQ (vs C8051F38C-GQ)
  • Defined high-performance USB and flash configuration (vs C8051F384-GQ)

Design Notes

Route USB D+ and D- as a short, tightly coupled differential pair with continuous reference-plane support and impedance set to the USB requirement used by the design. Keep the USB transceiver connection compact, minimize stubs, and place any required USB series termination close to the controller pins according to the C8051F38x recommended layout. Maintain a direct ground return beneath the pair and separate switching-clock routing from sensitive analog inputs.

Place all required bypass capacitors immediately beside their associated supply pins and connect each capacitor ground terminal to the nearest available ground plane through a short path. Follow the C8051F38x datasheet for capacitor values, placement, and power-supply topology. Do not assume that a generic bulk capacitor can replace local high-frequency decoupling, especially near the USB and analog circuitry.

Do not substitute C8051F38C-GQ directly because it uses a 32-pin LQFP package and has 16KB of flash rather than the C8051F380-GQ's 64KB. Also avoid treating the 2.7 V to 5.25 V operating range as permission to operate from an unregulated 5 V source. Validate the clock source, reset behavior, USB operating mode, and selected family member's pin-specific peripherals before releasing firmware.

Keep comparator and analog-sensor inputs away from USB data, oscillator, and high-edge-rate digital traces. Use a continuous ground plane, return sensitive signals over an uninterrupted reference, and separate noisy current paths from precision references. Because the port and reset inputs tolerate signals up to 5 V, voltage-domain compatibility still must be checked for every connected peripheral rather than inferred only from that input tolerance.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.

Related Searches

c8051f380 datasheet c8051f380 gqr c8051f380 development board c8051f380 silicon labs c8051f380 programmer c8051f380 microcontroller c8051f380 programming C8051F380-GQ pinout C8051F380-GQ datasheet pdf C8051F380-GQ replacement C8051F380-GQ equivalent C8051F380-GQ price C8051F380-GQ vs C8051F384-GQ C8051F380-GQ USB 2.0

Related Components & Terms

Silicon Labs C8051F380-GQ C8051F381-GQ C8051F382-GQ C8051F384-GQ C8051F385-GQ C8051F387-GQ C8051F38C-GQ C8051F38x 8-bit microcontroller 8051 instruction set flash memory USB 2.0 USB function controller 48 MIPS 50 MHz clock TQFP-48 surface-mount package analog comparator internal voltage reference brown-out detector power-on reset USB data logger industrial protocol bridge
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details