C8051F380-GQ 8-Bit 48 MIPS 64KB Flash MCU | Silicon Labs
MPN: C8051F380-GQ ✓ सक्रियC8051F380-GQ अवलोकन
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one component. The C8051F38x family combines the 8051 instruction set with enhanced clocking, USB connectivity, analog peripherals, and flash-based program storage. USB device control is an important feature for applications requiring direct connection to a host computer without a separate interface controller.
The C8051F380-GQ provides 48 MIPS execution performance, 64KB of flash memory, full-speed USB operation at 12 Mbps or low-speed operation at 1.5 Mbps, and USB 2.0-compliant operation. Family features include two comparators, a brown-out detector, power-on reset circuitry, a built-in temperature sensor, an external conversion-start input option, and an internal voltage reference for designated C8051F38x devices.
The 8051-compatible architecture supports familiar embedded control workflows while the integrated USB function controller reduces the component count in peripheral designs. The port I/O and reset pins accept input signals up to 5 V, which can simplify interfacing with 5 V-tolerant digital peripherals. The C8051F38x family is offered in 48-pin TQFP, 32-pin LQFP, and 32-pin QFN configurations, allowing package selection according to board-area and assembly requirements.
Typical applications include USB-connected measurement instruments, data loggers, industrial control modules, serial protocol bridges, test equipment, and compact USB peripheral products. In each case, the MCU can execute control logic, acquire analog inputs, operate timers and communication peripherals, and enumerate as a USB device from a single integrated component.
PCB design should follow the manufacturer pin-description and recommended decoupling guidance. Place the crystal or clock circuitry close to the relevant device pins, route USB D+ and D- as a controlled-impedance differential pair, and provide a clean ground return for the analog and digital sections. Confirm the exact package pin assignments and programming configuration against the C8051F38x datasheet before releasing a layout.
This product page combines the exact C8051F380-GQ ordering information, family-level USB and analog capabilities, package details, comparison parameters, drop-in family alternatives, and practical implementation guidance to support faster component selection and board bring-up.
के लिए ड्रॉप-इन विकल्प C8051F380-GQ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं C8051F380-GQ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type, Flash Memory, Maximum Clock Frequency, Pin Count.
C8051F381-GQ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →C8051F382-GQ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →C8051F384-GQ
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →C8051F385-GQ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F387-GQ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
C8051F380-GQ Maximum Ratings और Electrical Characteristics
| Microcontroller Type | 8-bit 8051-compatible flash MCU |
| Maximum CPU Performance | 48 MIPS |
| Flash Memory | 64KB (64K x 8) |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 50 MHz |
| ऑपरेटिंग सप्लाई वोल्टेज | 2.7 V to 5.25 V |
| USB Specification | USB 2.0 compliant |
| USB Operating Speed | 12 Mbps full speed or 1.5 Mbps low speed |
| Integrated USB Function Controller | Yes |
| Comparator Count | 2 |
| Built-in Temperature Sensor | Yes |
| External Conversion Start Input | Yes |
| Internal Voltage Reference | Yes for C8051F380/1/2/3/C devices |
| Brown-out Detector | Yes |
| Power-on Reset Circuitry | Yes |
| Port I/O and Reset Input Tolerance | Up to 5 V |
| पैकेज | 48-pin TQFP (7 x 7 mm) |
| माउंटिंग प्रकार | Surface mount |
C8051F380-GQ 48-pin tqfp (7 x 7 mm) पिन कॉन्फ़िगरेशन गाइड
C8051F380-GQ (48-pin tqfp (7 x 7 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F380-GQ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
C8051F380-GQ के लिए उपयुक्त है 6 अनुप्रयोगs: USB Data Logger, Industrial Protocol Bridge, USB Measurement Instrument, USB Security and Access Peripheral, Programmable Test and Control Module, USB Sensor Interface Hub.
USB Data Logger
The C8051F380-GQ fits a USB data logger because its 48 MIPS 8051-compatible core can supervise acquisition and storage logic while the integrated USB 2.0 function controller handles communication with a host. Its 64KB flash supports firmware, configuration data, and compact local buffering, while two comparators can implement threshold detection around sensor outputs. The 48-pin TQFP also provides sufficient I/O for sensor conditioning, status indication, and external storage control. Implement USB D+ and D- as a controlled-impedance differential pair and verify enumeration timing and current limits in the final design.
अनुशंसित
Industrial Protocol Bridge
The C8051F380-GQ is appropriate for an industrial protocol bridge where USB connects to an embedded equipment network. At up to 48 MIPS, the core can service protocol timing, packet processing, and host communication concurrently, while 64KB of flash holds application code and lookup tables. The supply range of 2.7 V to 5.25 V supports integration with both 3.3 V and 5 V system rails, and the port and reset inputs tolerate signals up to 5 V. Industrial qualification still requires checking transient immunity, grounding, isolation, and operating-temperature requirements for the deployed enclosure.
अनुशंसित
USB Measurement Instrument
The C8051F380-GQ can serve as the control and USB interface in a portable measurement instrument. Its two comparators are useful for direct thresholding, while the built-in temperature sensor supports board-level monitoring; the internal voltage reference is available for designated C8051F38x devices. The 48 MIPS processing rate leaves capacity for calibration, filtering, and user-interface updates without requiring a separate high-performance MCU. Design the analog front end independently from the digital ground return, apply filtering to sensor inputs, and confirm ADC-related requirements in the family datasheet before selecting the device.
अनुशंसित
USB Security and Access Peripheral
The C8051F380-GQ can provide control, authentication coordination, and USB connectivity in a compact security accessory. Its dedicated USB function controller supports 12 Mbps full-speed or 1.5 Mbps low-speed operation, which is appropriate for keyboards, readers, credential devices, and other low-bandwidth peripherals. The 64KB flash capacity provides room for firmware and configuration storage, and the brown-out detector and power-on reset support reliable startup. Security-sensitive designs should add appropriate external protection, validate firmware update procedures, and isolate sensitive analog or communication paths according to the product threat model.
अनुशंसित
Programmable Test and Control Module
The C8051F380-GQ is suitable for a programmable test module that combines stimulus generation, response monitoring, and USB-based configuration. Its 48 MIPS execution capability supports deterministic control tasks, while 64KB of flash accommodates firmware, calibration tables, and test sequences. Two comparators can provide fast threshold events, and the 50 MHz maximum device clock supports divided timer and communication-clock configurations. For repeatable measurements, connect analog and digital returns carefully, provide local decoupling at each supply pin, and use the manufacturer timing diagrams to establish clock and peripheral operating margins.
अनुशंसित
USB Sensor Interface Hub
The C8051F380-GQ can act as the local controller and USB interface for a multi-sensor device. The 8051-compatible core handles sensor polling, configuration, and data formatting, while the integrated USB controller transfers results to a computer. Its 2.7 V to 5.25 V operating range supports common embedded rails, and 5 V-tolerant port and reset inputs improve interface flexibility with external logic. Keep sensor analog traces away from USB clock and differential data paths, provide local bypass capacitance, and validate each sensor's voltage and timing requirements before finalizing the pin assignment.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा C8051F380-GQ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | C8051F381-GQ | C8051F382-GQ | C8051F384-GQ | C8051F385-GQ | C8051F387-GQ |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) |
| USB Controller | Integrated USB 2.0 function controller | Integrated USB function controller | Integrated USB function controller | Integrated USB function controller | Integrated USB function controller | Integrated USB function controller |
| USB Maximum Speed | 12 Mbps full speed | 12 Mbps full speed | 12 Mbps full speed | 12 Mbps full speed | 12 Mbps full speed | 12 Mbps full speed |
मुख्य विशेषताएँ
- Higher flash capacity than the 32-pin C8051F38C-GQ family member (बनामC8051F38C-GQ)
- Larger 48-pin TQFP interface than C8051F38C-GQ (बनामC8051F38C-GQ)
- Defined high-performance USB and flash configuration (बनामC8051F384-GQ)
डिज़ाइन नोट्स
Route USB D+ and D- as a short, tightly coupled differential pair with continuous reference-plane support and impedance set to the USB requirement used by the design. Keep the USB transceiver connection compact, minimize stubs, and place any required USB series termination close to the controller pins according to the C8051F38x recommended layout. Maintain a direct ground return beneath the pair and separate switching-clock routing from sensitive analog inputs.
Place all required bypass capacitors immediately beside their associated supply pins and connect each capacitor ground terminal to the nearest available ground plane through a short path. Follow the C8051F38x datasheet for capacitor values, placement, and power-supply topology. Do not assume that a generic bulk capacitor can replace local high-frequency decoupling, especially near the USB and analog circuitry.
Do not substitute C8051F38C-GQ directly because it uses a 32-pin LQFP package and has 16KB of flash rather than the C8051F380-GQ's 64KB. Also avoid treating the 2.7 V to 5.25 V operating range as permission to operate from an unregulated 5 V source. Validate the clock source, reset behavior, USB operating mode, and selected family member's pin-specific peripherals before releasing firmware.
Keep comparator and analog-sensor inputs away from USB data, oscillator, and high-edge-rate digital traces. Use a continuous ground plane, return sensitive signals over an uninterrupted reference, and separate noisy current paths from precision references. Because the port and reset inputs tolerate signals up to 5 V, voltage-domain compatibility still must be checked for every connected peripheral rather than inferred only from that input tolerance.
अनुपालन जानकारी
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.