Harris Corporation

CD4022BD3 4-Bit Binary Counter | Harris Corporation

MPN: CD4022BD3 ✗ End of Life
3 V to 18 V Vdss 16-CDIP Package 11 MHz Speed
MOQ: 1 |

CD4022BD3 Overview

The Harris Corporation CD4022BD3 is a 4-bit binary counter IC with one counter element, positive-edge counting, and a 16-CDIP package. According to the manufacturer-related listing, the device operates across a 3 V to 18 V supply range and supports counting frequencies up to 11 MHz. Its counter outputs provide a practical divide-by-2, divide-by-4, divide-by-8, and divide-by-16 sequence for digital control, timing, sequencing, and frequency-division circuits. The CD4022BD3 belongs to the CMOS CD4000 logic family, combining low-voltage operation with wide supply-voltage tolerance and conventional through-hole DIP construction.

A binary counter is a sequential digital circuit that records successive binary states at each active clock transition. The CD4022BD3 advances on the positive edge of the clock signal and provides four parallel output bits, Q0 through Q3. Its architecture makes it useful when a system needs a compact modulo-16 counting sequence rather than the decade counting arrangement used by a modulo-10 counter. The reset input allows the count to be initialized to a known state, while the carry output can be used to indicate the terminal count and trigger another counting stage.

The 16-CDIP package is mechanically suitable for through-hole PCB assembly, prototyping, repair, and legacy industrial equipment. Its lead spacing provides generous creepage between adjacent pins, which is useful when the logic operates near the upper end of the 3 V to 18 V supply range. The counter’s positive-edge triggering makes board-level integration straightforward: connect the clock source to the clock pin, route the four count outputs to the receiving logic, and use the reset and carry signals for initialization and cascading. Decoupling close to the supply pins remains important even though the broad operating-voltage range is a principal feature of the CD4000 family.

The CD4022BD3 is appropriate for digital frequency dividers, programmable timing chains, industrial sequence controllers, pulse-counting modules, and older control systems that use CD4000-series CMOS logic. The 11 MHz maximum counting frequency allows the counter to divide substantially faster than ordinary low-frequency control signals, although actual system operation must respect the supply voltage, output loading, signal transition times, and external reset timing. For designs requiring a different package, pin function, or logic family, compare the manufacturer’s CD4022 documentation and the original system schematic before substituting a part.

This product page organizes the CD4022BD3 around its verified counter function, supply range, package, and timing characteristics, while also identifying the design constraints that matter when replacing a legacy Harris counter. Use the manufacturer datasheet and the original equipment documentation for final pin assignments, electrical limits, and qualification decisions before committing a new PCB design.

Drop-in alternatives for CD4022BD3 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

CD4022BD3 Maximum Ratings & Electrical Characteristics

Counter Type Binary counter
Number of Counter Elements 1 element
Number of Bits 4 bits
Counting Direction Positive edge
Supply Voltage Range 3 V to 18 V
Maximum Counting Frequency 11 MHz
Package 16-CDIP
Mounting Type Through-hole
Logic Family CD4000 CMOS
Output Type 4-bit counter output
MSL Level 3 (168 hours)
Quantity per Package 1 unit
ECCN EAR99
HTSUS Code 8542.39.0001
RoHS Status Compliant
REACH Status Vendor undefined

CD4022BD3 1 unit Pin Configuration Guide

Pin configuration for CD4022BD3 (1 unit package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

1 unit package pinout diagram for CD4022BD3

No detailed pinout data available for CD4022BD3.

Refer to the datasheet for full pin configuration.

Typical Applications

CD4022BD3 is suitable for 6 applications: Binary Frequency Divider, Industrial Pulse Counting, Digital Sequence Controller, Legacy Equipment Repair, Timing and Delay Generator, Instrumentation Counter.

⚡

Binary Frequency Divider

The CD4022BD3 is well suited to dividing a clock into lower-frequency binary tap signals because its four outputs represent successive divide-by-2, divide-by-4, divide-by-8, and divide-by-16 stages. The positive-edge counting behavior allows the output sequence to advance predictably on each active clock transition. With a listed maximum counting frequency of 11 MHz, the device can handle substantially faster inputs than typical low-speed control clocks. The 3 V to 18 V supply range also permits operation across widely separated logic rails. In implementation, keep the clock path short, provide clean logic levels, and use the output tap appropriate for the required division ratio.

🏭

Industrial Pulse Counting

The CD4022BD3 can count incoming pulses in industrial control, test, and event-accumulation systems. Its 4-bit binary output provides a compact representation of 16 count states, while positive-edge triggering helps prevent double counting when a mechanical contact or sensor output is properly conditioned. The 11 MHz maximum counting frequency provides margin above typical process-pulse rates. A practical implementation should include input conditioning or hysteresis where contact bounce is possible, and the reset input should be controlled so initialization does not race with the counted event stream.

🔧

Digital Sequence Controller

The CD4022BD3 provides a modulo-16 binary sequence that can be decoded to control a four-bit state machine, relay sequence, test fixture, or timing chain. The device is appropriate where a legacy system expects the standard CD4022 counting behavior and through-hole DIP assembly. The four parallel outputs simplify decoding into 16 states without requiring a separate binary counter. For reliable sequencing, respect reset timing relative to the clock edge and choose output drive consistent with the loads on each bit. The 16-CDIP format also provides practical lead spacing for hand-built and maintenance-oriented boards.

🔧

Legacy Equipment Repair

The CD4022BD3 is a practical match for repair of older equipment built around Harris or CD4000-series CMOS counters. Its verified 16-CDIP package matches the through-hole style commonly used in industrial control and test equipment, while the 3 V to 18 V supply range accommodates much of the legacy logic environment. The listing identifies the part as a single-element, 4-bit, positive-edge binary counter, allowing technicians to compare it with the failed device and original schematic. Before installation, verify the suffix, temperature grade, pin orientation, and signal polarity because related CD4022 ordering codes can differ in package or qualification details.

🖥️

Timing and Delay Generator

The CD4022BD3 can generate delayed or divided timing phases from a master clock in test equipment, process controls, and timing modules. Four binary outputs allow multiple time divisions to be taken from one counter, reducing the number of separate timing channels required. The 11 MHz maximum counting frequency supports high-rate clock division, while the positive-edge trigger provides a clear relationship between input and output transitions. Use the manufacturer timing characteristics to establish setup and hold margins, particularly when reset or asynchronous control signals are generated by another counter stage.

🧩

Instrumentation Counter

The CD4022BD3 is suitable for older measurement instruments that count samples, pulses, or timing intervals. Four binary outputs permit direct readout over a four-bit bus or decoding into a larger display and event system. Its 3 V to 18 V operating range supports legacy mixed-voltage logic, and the 16-CDIP package makes replacement straightforward on older through-hole boards. The main design considerations are clock conditioning, output loading, and reset behavior. For new precision instrumentation, a modern counter or small microcontroller may offer better measurement accuracy, smaller size, and broader lifecycle assurance.

What is the CD4022BD3?
The CD4022BD3 is a Harris Corporation 4-bit binary counter IC with one counter element, positive-edge counting, and a 16-CDIP package. According to the manufacturer-related distributor listing, it operates from 3 V to 18 V and supports counting frequencies up to 11 MHz. It is used for binary sequencing, frequency division, pulse counting, and timing or control functions in CD4000-series CMOS systems.
What are the key specifications of CD4022BD3?
The CD4022BD3 is a 4-bit, one-element binary counter that advances on the positive clock edge. Its listed operating supply range is 3 V to 18 V, with a maximum counting frequency of 11 MHz. The device is packaged in a 16-CDIP through-hole format. These characteristics make it appropriate for legacy CMOS timing, sequencing, and divide-by-2 through divide-by-16 applications.
What is the supply voltage range of CD4022BD3?
The CD4022BD3 operates from 3 V to 18 V, according to the Harris Corporation part listing. Designers should use the manufacturer datasheet for detailed input thresholds, output drive, and operating characteristics at each supply voltage. A local bypass capacitor near the supply pins is recommended for reliable operation in practical CMOS counter circuits.
How fast can CD4022BD3 count?
The listed maximum counting frequency for the CD4022BD3 is 11 MHz. Actual usable frequency depends on the supply voltage, clock rise and fall times, output loading, and the switching characteristics of the logic connected to the counter. The 11 MHz figure is a device-level operating limit, not a guarantee that every board-level clock and load combination will produce clean counting.
Where can I find the CD4022BD3 pinout?
The CD4022BD3 pinout is found in the CD4022B family documentation and should be assigned from the manufacturer’s package drawing before PCB routing. The verified product listing identifies the package as 16-CDIP, but it does not reproduce the individual pin names. Use the pin-description table in the manufacturer datasheet and confirm the counter’s clock, reset, data, output, carry, and supply connections for the selected grade.
Where to download the CD4022BD3 datasheet PDF?
The manufacturer CD4022B documentation can be located through the CD4022BD datasheet entry and cross-reference pages listed for this device. The verified search results identify a CD4022B CMOS counter/dividers datasheet, while the exact CD4022BD3 ordering information is shown on distributor listings. Confirm that the document revision covers the Harris CD4022BD3 temperature and package configuration before releasing production hardware.
Can CD4022BD3 replace CD4022BD?
CD4022BD3 can be considered only after confirming that the base-number ordering code and package arrangement match the original assembly requirements. The verified listing identifies CD4022BD3 as a 16-CDIP binary counter, while CD4022BD is shown separately in CD4022B family documentation. Compare the exact suffix, pin configuration, temperature grade, and original schematic before treating the two as interchangeable.
What can replace CD4022BD3?
A true drop-in replacement for the CD4022BD3 must match the 16-CDIP footprint, pin assignments, counter polarity, reset behavior, output carry function, and essential voltage and timing characteristics. The available cross-reference results identify CD4000-family comparison resources but do not name verified replacement MPNs. Use the CD4000 cross-reference table and manufacturer documentation, then confirm every pin and timing requirement on the candidate device.
Is CD4022BD3 suitable for frequency division?
The CD4022BD3 is suitable for frequency division because its four binary outputs provide divide-by-2, divide-by-4, divide-by-8, and divide-by-16 tap points. Its listed maximum counting frequency is 11 MHz, so it can handle signals well beyond ordinary industrial timing rates. Account for clock edge quality, output loading, and supply voltage when selecting the appropriate divided output.
Is CD4022BD3 suitable for industrial counters?
The CD4022BD3 is functionally appropriate for industrial counter and sequencing systems that use CD4000-series CMOS logic. Its 3 V to 18 V supply range and 11 MHz maximum counting frequency support both slow process-control timing and faster pulse-counting tasks. The manufacturer-specific temperature grade, qualification status, and long-term availability should be checked before using it in new safety-critical or high-reliability equipment.
How does CD4022BD3 compare with a CD4017 counter?
The CD4022BD3 counts in binary and provides four count outputs, while a CD4017 implements a decade counter with one output per count state. Consequently, the CD4022BD3 naturally provides modulo-16 behavior and convenient divide-by-2, 4, 8, and 16 outputs. The CD4017 is preferable for ten-step sequencing, whereas the CD4022BD3 fits binary counting and frequency division.
When should I choose CD4022BD3 for a new design?
Choose the CD4022BD3 when the design specifically needs a 4-bit positive-edge binary counter, a 3 V to 18 V supply range, and a 16-CDIP footprint. It is especially suitable for maintaining legacy CD4000-series circuitry, repairing industrial equipment, or building binary frequency dividers through through-hole assembly. For new compact or mixed-signal systems, compare modern logic families for size, speed, cost, and lifecycle considerations.
What is the price of CD4022BD3?
The current commercial amount for the CD4022BD3 is presented in the structured pricing area of this page. Use the Request a Quote form to obtain the current unit price, availability, minimum order quantity, and lead time for the exact Harris Corporation CD4022BD3 ordering code. The form avoids static price information that can become outdated.
Where can I buy CD4022BD3 online?
The CD4022BD3 can be requested through the Request a Quote form on this page. Provide the exact MPN CD4022BD3, target quantity, and required delivery information so the current commercial response can be prepared. Confirm that any offered part is the 16-CDIP Harris Corporation configuration rather than a different CD4022 package, temperature grade, or manufacturer code.
What is the lead time and stock status for CD4022BD3?
Current stock and lead time for the CD4022BD3 should be confirmed through the Request a Quote form on this page because they can change with inventory and sourcing conditions. Include the exact 16-CDIP MPN and your required quantity. If the device is being used for an ongoing production or repair program, request traceability information and any available lifecycle documentation as well.

Engineering reference data for CD4022BD3 — comparison, design guidance, and compliance information.

Selection Guide

Choose the CD4022BD3 when maintaining or reproducing a legacy Harris CD4000-series design that requires a 4-bit, positive-edge binary counter in a 16-CDIP package. It is especially suitable for through-hole industrial controls, test equipment, pulse counters, binary sequencing, and frequency division using the 3 V to 18 V CD4000 logic environment. The part should not be selected merely because another member of the CD4022 family has the same basic counter function; confirm the exact suffix, package, pinout, temperature grade, and lifecycle requirements. For a new compact product, compare a modern CMOS counter or microcontroller against board area, lifecycle, operating-temperature needs, and tooling cost. For a CD4017-based design requiring ten decoded states rather than modulo-16 binary operation, select the architecture that matches the required sequence. No drop-in alternative is listed because the available cross-reference results do not identify a candidate with verified pin, package, timing, and electrical equivalence.

Design Notes

Use the manufacturer pin-description table when assigning traces because the verified listing identifies the 16-CDIP package but does not reproduce individual pin names. Preserve the original CD4022 schematic orientation and verify pin 1 before insertion. A socket is useful for repair-oriented assemblies, provided the socket and board footprint match the original 16-CDIP arrangement. Avoid substituting a surface-mount counter without a deliberate footprint conversion.

Place a local supply bypass capacitor close to the CD4022BD3 supply and ground connections, with a short return path to reduce switching noise. The device operates from 3 V to 18 V, but operation near the upper limit does not remove the need for stable rail distribution. Confirm that clock and reset sources do not exceed the selected grade's input limits and that output loading remains within the manufacturer specifications.

Treat the clock as a clean edge-sensitive signal. Keep the clock route short, minimize stubs, and avoid sharing a long trace with high-current switching paths. When counting mechanical events or noisy sensor pulses, use conditioning, debouncing, or hysteresis before the counter input. Reset timing must also be checked against the clock so the count is initialized at the intended state without a race condition.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LCSC listing identifies the exact CD4022BD3 as RoHS compliant. The datasheet index describes REACH status as vendor undefined and identifies ECCN as EAR99; no manufacturer-specific AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was confirmed.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

CD4022BD3 datasheet CD4022BD3 pinout CD4022BD3 datasheet pdf CD4022BD3 equivalent CD4022BD3 replacement CD4022BD3 drop-in replacement CD4022BD3 price CD4022BD3 stock CD4022BD3 11MHz counter CD4022BD3 16-CDIP CD4022BD3 frequency divider Harris CD4022BD3

Related Components & Terms

Harris Corporation CD4022BD3 CD4022B CD4017 CD4000 CMOS logic binary counter modulo-16 counter CMOS logic digital counter frequency divider positive-edge triggering 3 V to 18 V supply 11 MHz maximum counting frequency 16-CDIP through-hole package counter output carry output reset input industrial control electronic test equipment pulse counting binary sequencing RoHS REACH EAR99
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details