CD4022BD3 4-Bit Binary Counter | Harris Corporation
MPN: CD4022BD3 ✗ 停產CD4022BD3 概覽
A binary counter is a sequential digital circuit that records successive binary states at each active clock transition. The CD4022BD3 advances on the positive edge of the clock signal and provides four parallel output bits, Q0 through Q3. Its architecture makes it useful when a system needs a compact modulo-16 counting sequence rather than the decade counting arrangement used by a modulo-10 counter. The reset input allows the count to be initialized to a known state, while the carry output can be used to indicate the terminal count and trigger another counting stage.
The 16-CDIP package is mechanically suitable for through-hole PCB assembly, prototyping, repair, and legacy industrial equipment. Its lead spacing provides generous creepage between adjacent pins, which is useful when the logic operates near the upper end of the 3 V to 18 V supply range. The counter’s positive-edge triggering makes board-level integration straightforward: connect the clock source to the clock pin, route the four count outputs to the receiving logic, and use the reset and carry signals for initialization and cascading. Decoupling close to the supply pins remains important even though the broad operating-voltage range is a principal feature of the CD4000 family.
The CD4022BD3 is appropriate for digital frequency dividers, programmable timing chains, industrial sequence controllers, pulse-counting modules, and older control systems that use CD4000-series CMOS logic. The 11 MHz maximum counting frequency allows the counter to divide substantially faster than ordinary low-frequency control signals, although actual system operation must respect the supply voltage, output loading, signal transition times, and external reset timing. For designs requiring a different package, pin function, or logic family, compare the manufacturer’s CD4022 documentation and the original system schematic before substituting a part.
This product page organizes the CD4022BD3 around its verified counter function, supply range, package, and timing characteristics, while also identifying the design constraints that matter when replacing a legacy Harris counter. Use the manufacturer datasheet and the original equipment documentation for final pin assignments, electrical limits, and qualification decisions before committing a new PCB design.
直接替換替代品,適用於 CD4022BD3 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品CD4022BD3 最大額定值與電氣特性
| Counter Type | Binary counter |
| Number of Counter Elements | 1 element |
| Number of Bits | 4 bits |
| Counting Direction | Positive edge |
| Supply Voltage Range | 3 V to 18 V |
| Maximum Counting Frequency | 11 MHz |
| 封裝 | 16-CDIP |
| 安裝類型 | Through-hole |
| Logic Family | CD4000 CMOS |
| 輸出類型 | 4-bit counter output |
| MSL 等級 | 3 (168 hours) |
| Quantity per Package | 1 unit |
| ECCN | EAR99 |
| HTSUS Code | 8542.39.0001 |
| RoHS 狀態 | Compliant |
| REACH Status | Vendor undefined |
CD4022BD3 1 unit 腳位配置指南
CD4022BD3(1 unit 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4022BD3.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4022BD3 適用於 6 應用s: Binary Frequency Divider, Industrial Pulse Counting, Digital Sequence Controller, Legacy Equipment Repair, Timing and Delay Generator, Instrumentation Counter.
Binary Frequency Divider
The CD4022BD3 is well suited to dividing a clock into lower-frequency binary tap signals because its four outputs represent successive divide-by-2, divide-by-4, divide-by-8, and divide-by-16 stages. The positive-edge counting behavior allows the output sequence to advance predictably on each active clock transition. With a listed maximum counting frequency of 11 MHz, the device can handle substantially faster inputs than typical low-speed control clocks. The 3 V to 18 V supply range also permits operation across widely separated logic rails. In implementation, keep the clock path short, provide clean logic levels, and use the output tap appropriate for the required division ratio.
推薦
Industrial Pulse Counting
The CD4022BD3 can count incoming pulses in industrial control, test, and event-accumulation systems. Its 4-bit binary output provides a compact representation of 16 count states, while positive-edge triggering helps prevent double counting when a mechanical contact or sensor output is properly conditioned. The 11 MHz maximum counting frequency provides margin above typical process-pulse rates. A practical implementation should include input conditioning or hysteresis where contact bounce is possible, and the reset input should be controlled so initialization does not race with the counted event stream.
推薦
Digital Sequence Controller
The CD4022BD3 provides a modulo-16 binary sequence that can be decoded to control a four-bit state machine, relay sequence, test fixture, or timing chain. The device is appropriate where a legacy system expects the standard CD4022 counting behavior and through-hole DIP assembly. The four parallel outputs simplify decoding into 16 states without requiring a separate binary counter. For reliable sequencing, respect reset timing relative to the clock edge and choose output drive consistent with the loads on each bit. The 16-CDIP format also provides practical lead spacing for hand-built and maintenance-oriented boards.
推薦
Legacy Equipment Repair
The CD4022BD3 is a practical match for repair of older equipment built around Harris or CD4000-series CMOS counters. Its verified 16-CDIP package matches the through-hole style commonly used in industrial control and test equipment, while the 3 V to 18 V supply range accommodates much of the legacy logic environment. The listing identifies the part as a single-element, 4-bit, positive-edge binary counter, allowing technicians to compare it with the failed device and original schematic. Before installation, verify the suffix, temperature grade, pin orientation, and signal polarity because related CD4022 ordering codes can differ in package or qualification details.
推薦
Timing and Delay Generator
The CD4022BD3 can generate delayed or divided timing phases from a master clock in test equipment, process controls, and timing modules. Four binary outputs allow multiple time divisions to be taken from one counter, reducing the number of separate timing channels required. The 11 MHz maximum counting frequency supports high-rate clock division, while the positive-edge trigger provides a clear relationship between input and output transitions. Use the manufacturer timing characteristics to establish setup and hold margins, particularly when reset or asynchronous control signals are generated by another counter stage.
推薦
Instrumentation Counter
The CD4022BD3 is suitable for older measurement instruments that count samples, pulses, or timing intervals. Four binary outputs permit direct readout over a four-bit bus or decoding into a larger display and event system. Its 3 V to 18 V operating range supports legacy mixed-voltage logic, and the 16-CDIP package makes replacement straightforward on older through-hole boards. The main design considerations are clock conditioning, output loading, and reset behavior. For new precision instrumentation, a modern counter or small microcontroller may offer better measurement accuracy, smaller size, and broader lifecycle assurance.
推薦
推薦產品摘要
工程參考資料,適用於 CD4022BD3 — 比較、設計指引及合規資訊。
選型指南
設計說明
Use the manufacturer pin-description table when assigning traces because the verified listing identifies the 16-CDIP package but does not reproduce individual pin names. Preserve the original CD4022 schematic orientation and verify pin 1 before insertion. A socket is useful for repair-oriented assemblies, provided the socket and board footprint match the original 16-CDIP arrangement. Avoid substituting a surface-mount counter without a deliberate footprint conversion.
Place a local supply bypass capacitor close to the CD4022BD3 supply and ground connections, with a short return path to reduce switching noise. The device operates from 3 V to 18 V, but operation near the upper limit does not remove the need for stable rail distribution. Confirm that clock and reset sources do not exceed the selected grade's input limits and that output loading remains within the manufacturer specifications.
Treat the clock as a clean edge-sensitive signal. Keep the clock route short, minimize stubs, and avoid sharing a long trace with high-current switching paths. When counting mechanical events or noisy sensor pulses, use conditioning, debouncing, or hysteresis before the counter input. Reset timing must also be checked against the clock so the count is initialized at the intended state without a race condition.
合規資訊
The LCSC listing identifies the exact CD4022BD3 as RoHS compliant. The datasheet index describes REACH status as vendor undefined and identifies ECCN as EAR99; no manufacturer-specific AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was confirmed.