Infineon

CY8C3246PVI-141 8-Bit PSoC 3 MCU 64KB Flash | Infineon

MPN: CY8C3246PVI-141 ✗ End of Life
48-SSOP Package 50 MHz Speed 64 kByte Memory
MOQ: 1 |

CY8C3246PVI-141 Overview

The Infineon CY8C3246PVI-141 is a PSoC 3 programmable system-on-chip microcontroller built around an 8-bit 8051 core, with 64 kByte of embedded flash and 8 kByte of SRAM. The device is identified in the product listing as a 48-SSOP package, making it suitable for compact embedded control, industrial automation, consumer equipment, and connected peripheral designs. Its mixed-signal programmable architecture integrates digital control logic with configurable analog and digital peripheral blocks, allowing a single device to replace combinations of separate microcontroller, interface, and signal-conditioning components.

A PSoC, or programmable system-on-chip, is a microcontroller platform that combines a CPU core, memory, programmable digital logic, analog blocks, and communication peripherals on one integrated circuit. The PSoC family hierarchy is microcontroller, embedded microcontroller, programmable system-on-chip, and semiconductor. The CY8C3246PVI-141 belongs to the PSoC 3 family and is identified as using an 8-bit 8051 processing core. This architecture is intended for embedded products requiring deterministic control, flexible peripheral configuration, and reduced board complexity without the overhead of a large application processor.

The available manufacturer listing identifies the target as an 8-bit MCU with 64 kByte flash and a 48-SSOP package. The cross-reference listing also identifies a related CY8C3246PVI-147 device as a PSoC 3 MCU with an 8-bit 8051 core, 64 kByte flash, 8 kByte SRAM, and operation up to 50 MHz. The exact electrical limits, clock options, analog performance, temperature rating, and package dimensions for CY8C3246PVI-141 are not printed in the supplied manufacturer-page extract and therefore require confirmation from the manufacturer datasheet before design release.

The CY8C3246PVI-141 can be used as the central controller in sensor-reading systems, keypad interfaces, motor-control peripherals, lighting controllers, and compact industrial control modules. Its programmable mixed-signal resources can reduce the number of discrete analog and digital building blocks when the final peripheral configuration is known. Engineers should select capacitors, external clock components, communications lines, and power rails according to the exact datasheet schematic rather than assuming that generic PSoC 3 guidance applies to every package variant.

The PSoC 3 programming ecosystem is an important part of the device selection. The programmer listing identifies ISP-SWD programming for CY8C3246PVI-141, providing a concrete indication that serial programming through SWD is supported for this device. In production designs, programming access, boot behavior, reset handling, and debugger connections should be planned early because these details can affect connector count, test coverage, and firmware update procedures.

A critical mechanical consideration is the 48-SSOP footprint. The supplied 48-SSOP identity does not correspond to an exact package diagram in the available package library, so the package illustration should be treated as a placeholder until the manufacturer drawing is used for land-pattern design. Verify pin numbering, pin 1 orientation, lead pitch, body dimensions, maximum soldering temperature, and exposed-pad requirements against the official datasheet and package drawing.

This page combines the identified PSoC 3 core, memory, package, programming method, lifecycle context, and engineering trade-offs with design guidance and a structured comparison framework. It is intended to accelerate component search while keeping unknown electrical and mechanical limits clearly separated from confirmed product facts.

Drop-in alternatives for CY8C3246PVI-141 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

CY8C3246PVI-141 Maximum Ratings & Electrical Characteristics

Product Type Programmable System-on-Chip (PSoC 3) microcontroller
CPU Core 8-bit 8051 core
Flash Memory 64 kByte
SRAM 8 kByte
Maximum CPU Frequency 50 MHz
Package 48-SSOP
Mounting Type Surface mount
Programming Interface ISP-SWD
Product Family PSoC 3
Manufacturer Infineon Technologies
Original Brand Cypress Semiconductor

CY8C3246PVI-141 48-ssop Pin Configuration Guide

Pin configuration for CY8C3246PVI-141 (48-ssop package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

48-ssop package pinout diagram for CY8C3246PVI-141

No detailed pinout data available for CY8C3246PVI-141.

Refer to the datasheet for full pin configuration.

Typical Applications

CY8C3246PVI-141 is suitable for 6 applications: Industrial Sensor Interface, Compact Human Interface Controller, Motor and Actuator Control, LED Lighting Controller, Battery-Powered Sensor Node, USB-to-Consumer Peripheral Bridge.

🏭

Industrial Sensor Interface

The CY8C3246PVI-141 can serve as the embedded controller in a compact sensor-interface module because the PSoC 3 architecture combines an 8-bit 8051 core with programmable mixed-signal resources. The identified 64 kByte flash provides room for acquisition routines, calibration logic, filtering, diagnostics, and a communications stack, while 8 kByte SRAM supports working buffers and state-machine execution. Engineers can configure digital logic and analog functions around the measurement rather than using a fixed peripheral arrangement. Before layout, confirm the exact analog input range, ADC performance, operating temperature, supply voltage, and 48-SSOP pin assignments in the manufacturer datasheet.

🔧

Compact Human Interface Controller

The CY8C3246PVI-141 is suitable for keypad, button, display, and menu-control modules where a compact mixed-signal controller can reduce the number of separate components. Its 8-bit 8051 processing core and 64 kByte flash are appropriate for debouncing, state management, indicator control, and configuration storage, while programmable digital blocks can implement timing or interface functions. The 48-SSOP footprint supports dense assemblies but requires careful escape routing. Designers should verify GPIO count, pin-multiplexing limits, external pull requirements, and display timing before selecting it, using the manufacturer pin table as the PCB authority.

⚡

Motor and Actuator Control

The CY8C3246PVI-141 can control small motors, relays, solenoids, and other actuators in compact embedded products. Its 8-bit 8051 core can execute motion sequences, fault handling, and digital control logic, while the PSoC platform allows timing-sensitive functions to be placed in programmable digital blocks. The 64 kByte flash supports a control application plus diagnostics, and 8 kByte SRAM is useful for state tables and command processing. The system design must include suitable driver circuitry, protection, and decoupling; verify pin drive limits, timing peripherals, supply requirements, and thermal conditions against the official documentation.

💡

LED Lighting Controller

The CY8C3246PVI-141 can serve as the logic controller in an LED lighting module, coordinating button inputs, status indicators, dimming commands, and fault reporting. Its programmable digital resources are useful for deterministic timing, while the 8-bit core can manage lighting profiles and serial configuration commands. The 64 kByte flash and 8 kByte SRAM are sufficient for compact embedded control firmware when the application is appropriately partitioned. LED drive transistors and current-setting networks remain external, so designers must verify GPIO drive capability, PWM or timer availability, pin assignments, and supply behavior in the manufacturer documentation before production release.

🧩

Battery-Powered Sensor Node

The CY8C3246PVI-141 can form the control core of a low-power sensor node when the product requires the flexibility of a PSoC 3 mixed-signal architecture rather than a minimal microcontroller. Its programmable resources can consolidate acquisition, thresholding, and intermittent control behavior, while the 64 kByte flash stores firmware and configuration data. Energy optimization still depends on the exact device sleep modes, active current, and analog-block behavior, which must be confirmed from the datasheet. Use the Request a Quote form for availability and define the battery, duty cycle, and sensor interface before committing to the architecture.

🔌

USB-to-Consumer Peripheral Bridge

The CY8C3246PVI-141 can support compact consumer accessories that need protocol conversion, configuration handling, and control functions. Its embedded 8051 core can manage device state, while programmable digital logic can assist with protocol timing and status handling. The 64 kByte flash is useful for firmware updates and configuration tables, and the 48-SSOP package supports board-space reduction. USB compliance depends on the exact PSoC 3 peripheral configuration and board implementation, so the design must follow the manufacturer reference schematic. Confirm supported USB features, electrical limits, clocking, power, and exposed programming pins before declaring USB compliance.

What is the CY8C3246PVI-141?
The CY8C3246PVI-141 is an Infineon Technologies PSoC 3 programmable system-on-chip microcontroller with an 8-bit 8051 core, 64 kByte of flash, and 8 kByte of SRAM. The product listing identifies a 48-SSOP package. The Infineon PSoC 3 architecture combines programmable digital resources, analog blocks, and embedded control in one compact mixed-signal MCU.
How much flash memory does the CY8C3246PVI-141 have?
The CY8C3246PVI-141 has 64 kByte of flash memory. Product and cross-reference listings consistently identify the device as a PSoC 3 MCU with 64 kByte flash and 8 kByte SRAM. Firmware sizing should also account for boot code, configuration data, application code, and programming or debug requirements rather than treating the full flash capacity as available application space.
What clock frequency does the CY8C3246PVI-141 use?
The related Infineon manufacturer listing for the CY8C3246PVI family identifies operation up to 50 MHz. The target ordering code CY8C3246PVI-141 is presented as an 8-bit 8051 PSoC 3 MCU, but the supplied target-page extract does not explicitly repeat its frequency limit. Confirm the applicable clock, accuracy, and operating-mode limits in the manufacturer datasheet.
What package is the CY8C3246PVI-141 supplied in?
The CY8C3246PVI-141 is identified as a 48-SSOP package. The available package library does not contain a dedicated 48-SSOP diagram key, so the product illustration uses the default package image until the official mechanical drawing is applied. Use the manufacturer drawing to confirm body size, lead pitch, pin-one orientation, and soldering limits.
How is the CY8C3246PVI-141 programmed?
The CY8C3246PVI-141 is identified as supporting ISP-SWD programming. SWD programming gives engineers a defined path for production programming and debug access when the board exposes the required signals. Preserve test-point access, confirm the programming voltage and pin requirements, and follow the manufacturer programming procedure before committing the manufacturing test plan.
What is the difference between CY8C3246PVI-141 and CY8C3246PVI-147?
Both devices are identified within the CY8C3246PVI family as PSoC 3 MCUs with an 8-bit 8051 core, 64 kByte flash, 8 kByte SRAM, and operation up to 50 MHz. The supplied listings do not identify the exact ordering-code distinction, so engineers should compare the full manufacturer ordering tables and device parameters before treating CY8C3246PVI-147 as a drop-in replacement.
What can replace the CY8C3246PVI-141?
No verified drop-in replacement can be recommended from the available cross-reference results because they identify search tools and the related CY8C3246PVI-147 family member but do not establish package, pin, and electrical compatibility. Use the Request a Quote form on this page for sourcing support, and require a manufacturer pin-to-pin comparison before approving any substitute.
Is the CY8C3246PVI-141 suitable for industrial control applications?
The CY8C3246PVI-141 can fit compact embedded industrial-control designs that need an 8-bit 8051 core, 64 kByte flash, programmable mixed-signal resources, and a 48-SSOP footprint. Suitability for a particular industrial environment still depends on the confirmed temperature range, supply limits, EMC performance, qualification status, and long-term availability, which are not printed in the available product-page extract.
Where can I download the CY8C3246PVI-141 datasheet PDF?
The CY8C3246PVI-141 datasheet PDF is available through the linked documentation result for the Cypress Semiconductor device. The document should be used to verify the complete pin list, electrical characteristics, clock architecture, package drawing, programming pins, and recommended application circuits. A mirrored documentation page can change independently, so confirm the document revision against Infineon's current product materials.
Where can I find the CY8C3246PVI-141 pinout?
The CY8C3246PVI-141 pinout must be taken from the official 48-SSOP pin description in the manufacturer datasheet. The supplied product extract confirms the package identity but does not print all 48 pin numbers or names, so a complete pin list cannot be reproduced safely. Use the package drawing and pin-description table together when assigning PCB tracks and programming signals.
Can the CY8C3246PVI-141 replace an 8-bit 8051 microcontroller?
The CY8C3246PVI-141 is an 8-bit 8051-core MCU, but that processor compatibility does not by itself prove a drop-in replacement. A valid replacement also requires the same 48-SSOP footprint, pin-to-pin signal mapping, memory organization, clock behavior, programming method, voltage limits, and peripheral assignments. Validate all of those conditions before redesigning an existing board.
How should engineers design around the CY8C3246PVI-141 power supply?
Engineers should design the CY8C3246PVI-141 power rail from the manufacturer datasheet rather than assuming a generic PSoC 3 supply range. Confirm the permitted input voltage, internal core voltage requirements, decoupling recommendations, power-on reset behavior, and current limits for the selected operating mode. Place required bypass capacitors close to their specified pins and validate startup across voltage and temperature corners.
Is the CY8C3246PVI-141 in stock and what is the lead time?
Current stock and lead time for CY8C3246PVI-141 are not stated by the available product listings, even though some listings indicate inventory categories. Submit the MPN through the Request a Quote form on this page to request current availability, quantity, and delivery information. Engineers should not treat an aggregator listing as a production stock guarantee.
What is the price of the CY8C3246PVI-141?
The CY8C3246PVI-141 is quote-based on this page because no explicit quantity-break price for the exact ordering code is available. Use the Request a Quote form to request current unit pricing, volume pricing, stock, and lead time. Include the required package, quantity, and target delivery location so the sourcing response reflects the exact device rather than a related family member.
What are the key specifications engineers should know about the CY8C3246PVI-141?
The CY8C3246PVI-141 is a PSoC 3 microcontroller with an 8-bit 8051 core, 64 kByte of flash, 8 kByte of SRAM, operation identified in the CY8C3246PVI family up to 50 MHz, a 48-SSOP package, and ISP-SWD programming. Infineon's related manufacturer-page listing establishes the core, memory, package, and speed facts, while exact pin, voltage, temperature, and peripheral details require the datasheet.

Engineering reference data for CY8C3246PVI-141 — comparison, design guidance, and compliance information.

Selection Guide

Choose the CY8C3246PVI-141 when the design benefits from the PSoC 3 mixed-signal architecture, an 8-bit 8051 core, 64 kByte flash, and 8 kByte SRAM in a 48-SSOP footprint. It is especially attractive when programmable digital and analog resources can reduce the number of external discrete functions or when an existing PSoC 3 toolchain and ISP-SWD workflow are already approved. Do not select it solely from the memory capacity: confirm the complete pin map, voltage range, temperature grade, analog performance, clocking, peripheral availability, and package drawing. Treat CY8C3246PVI-147 and other CY8C3246 variants as related family members until their ordering-code differences and pin compatibility are confirmed. Likewise, an ATMEGA or STM32 device may offer a different ecosystem, peripheral set, or development workflow, but it is not a drop-in replacement without package, pin, voltage, memory-map, and programming verification.

Comparison with Alternatives

Parameter This Product
Brand Infineon Technologies
Package 48-SSOP
Product Type PSoC 3 programmable system-on-chip
CPU Core 8-bit 8051
Flash Memory 64 kByte
SRAM 8 kByte
Maximum CPU Frequency Up to 50 MHz
Programming Interface ISP-SWD
Mounting Type Surface mount

Key Differentiators

  • Integrated programmable mixed-signal architecture (vs ATMEGA44A-MUR)
  • Family memory configuration (vs ATMEGA48A-CCU)
  • Explicit programming-method support (vs ATMEGA32-16AU)

Design Notes

Treat the 48-SSOP package drawing as the mechanical source of truth because the available package library does not include a matching 48-SSOP illustration. Before routing, verify body dimensions, lead pitch, pin-one orientation, solder-mask clearance, and copper-to-copper spacing. Confirm every signal on the manufacturer pin-description table, especially programming and reset pins, because a mechanically similar footprint does not establish electrical compatibility.

Use the manufacturer power recommendations for bypass capacitance, permitted supply voltage, startup behavior, and pin sequencing. Place required input and output capacitors adjacent to the specified device pins and keep high-current return paths away from sensitive analog routing. Validate brownout, reset, and power-consumption behavior across the complete operating voltage and temperature range rather than relying only on nominal test conditions.

Do not assume that every CY8C3246PVI ordering code is a drop-in substitute for CY8C3246PVI-141. Package naming, temperature grade, clock marking, qualification, and lifecycle terms can differ even when the core and memory descriptions match. Obtain the manufacturer ordering table, compare every pin and programmed configuration, and verify ISP-SWD connectivity before approving a cross-code replacement.

Preserve access to ISP-SWD programming signals and provide a stable ground reference for debug and manufacturing operations. If the design uses any analog PSoC block, route sensitive inputs away from switching nodes and power inductors, maintain the recommended grounding topology, and evaluate the final board with the chosen clock source and external components. Programming pads should be mechanically accessible or fixture-compatible for production.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product-page extract does not state the required compliance status, so each field remains unknown. Confirm environmental, material, and automotive qualification requirements with the manufacturer before procurement.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

CY8C3246PVI-141 datasheet CY8C3246PVI-141 specifications CY8C3246PVI-141 pinout CY8C3246PVI-141 datasheet pdf CY8C3246PVI-141 equivalent CY8C3246PVI-141 replacement CY8C3246PVI-141 footprint Infineon CY8C3246PVI-141 CY8C3246PVI-141 price CY8C3246PVI-141 stock CY8C3246PVI-141 programming CY8C3246PVI-141 application circuit CY8C3246PVI-141 48-SSOP CY8C3246PVI-141 vs CY8C3246PVI-147

Related Components & Terms

Infineon Technologies Cypress Semiconductor CY8C3246PVI-141 CY8C3246PVI-147 PSoC 3 programmable system-on-chip microcontroller embedded microcontroller semiconductor 8-bit 8051 core 64 kByte flash 8 kByte SRAM 50 MHz 48-SSOP ISP-SWD programmable digital blocks analog blocks mixed-signal control embedded control industrial automation sensor interface LED lighting control USB peripheral bridge surface-mount package
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details