DG419LDJ+ - 35 Ohm SPDT Analog Switch | Analog Devices
MPN: DG419LDJ+ ✓ ActiveDG419LDJ+ Overview
An analog switch is an interface IC that connects or isolates an analog signal under digital control. A SPDT switch can route one common terminal to either of two independent terminals, making it useful for signal selection, polarity routing, test-point isolation, and signal-path multiplexing. The DG419LDJ+ belongs to the Analog Devices DG419L precision analog-switch family, combining low on-resistance with improved matching, flat on-resistance, low charge injection, and low off-leakage.
Key features include a maximum on-resistance of 35 ohms, on-resistance matching within 3 ohms, and flat on-resistance variation limited to 4 ohms across the signal range. Charge injection is limited to 10 pC, while off-leakage remains below 5 nA at +85°C. The logic-compatible control architecture allows +3 V control operation when the device is powered from ±12 V or ±15 V supplies, simplifying interfacing with modern control logic.
The DG419LDJ+ uses a low-power CMOS analog-switch architecture to support signal routing without adding substantial dynamic power. Its improved matching between channels and guaranteed flat on-resistance make it appropriate where consistent insertion loss matters across the selected signal range. The 185 ns maximum off-time supports applications requiring rapid transition between routed states.
Typical uses include audio signal routing, battery-operated equipment, communication systems, guidance and control circuits, military radios, modems, and PBX or PABX equipment. The device is particularly useful where a ±4.5 V minimum dual supply is acceptable and a through-hole PDIP package simplifies inspection, prototyping, and serviceability.
Use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Keep the common and switched terminals away from long parallel routes carrying fast signals, connect supply decoupling close to the appropriate pins, and verify the control voltage against the selected supply configuration before powering the device.
This page consolidates manufacturer specifications, sourcing guidance, application fit, and practical design notes for engineers evaluating the DG419LDJ+. It also distinguishes true package-compatible alternatives from related surface-mount versions that require a different PCB footprint.
Drop-in alternatives for DG419LDJ+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
DG419LDJ
✅ Drop-In📋 Reference alternative (not in catalog)
DG419LDJ+ Maximum Ratings & Electrical Characteristics
| Configuration | 1 x SPDT |
| Number of Channels | 1 channel |
| Maximum On-Resistance | 35 ohm |
| On-Resistance Matching | 3 ohm maximum |
| Flat On-Resistance | 4 ohm maximum |
| Maximum Charge Injection | 10 pC |
| Maximum Off-Leakage Current | 5 nA at +85°C |
| Maximum Off Time | 185 ns |
| Minimum Dual-Supply Voltage | ±4.5 V |
| Maximum Dual-Supply Voltage | ±20 V |
| Logic Compatibility | +3 V compatible at ±12 V or ±15 V supply |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| ESD withstand | 2000 V minimum |
| Package | 8-pin PDIP |
| Mounting Type | Through-hole |
DG419LDJ+ 8-pin pdip Pin Configuration Guide
Pin configuration for DG419LDJ+ (8-pin pdip package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for DG419LDJ+.
Refer to the datasheet for full pin configuration.
Typical Applications
DG419LDJ+ is suitable for 6 applications: Audio Signal Routing, Battery-Operated Test Equipment, Communication Signal Multiplexing, Guidance and Control Systems, Military Radio Signal Routing, Precision Signal Isolation.
Audio Signal Routing
The DG419LDJ+ is suitable for selecting one of two low-level audio paths through its single SPDT channel. Its 35 ohm maximum on-resistance limits insertion loss in high-impedance audio routing, while the 4 ohm maximum flat-on-resistance variation helps maintain consistent channel behavior across the signal range. The +3 V-compatible control input also simplifies operation from modern digital control circuits when the switch is powered from ±12 V or ±15 V. For microphone preamplifier or line-level routing, confirm that 35 ohm is acceptable relative to the source impedance and that the selected supply configuration meets the audio board’s ground and common-mode requirements.
Recommended
Battery-Operated Test Equipment
The DG419LDJ+ can route a measurement signal inside compact battery-operated systems when its dual-supply requirement can be met. The SPDT configuration allows a common input to select between two sources without duplicating the surrounding analog circuitry. Its low-power CMOS implementation and low 185 ns off-time support fast path changes, while off-leakage below 5 nA at +85°C helps isolate inactive paths. Because the minimum dual supply is ±4.5 V, designers using a single low-voltage battery should include an appropriate rail converter rather than assuming the device can operate from a single 3.3 V supply.
Recommended
Communication Signal Multiplexing
The DG419LDJ+ can select between communication paths in modems, PBX, and PABX equipment where one channel is sufficient for the required routing topology. The maximum on-resistance of 35 ohm is especially suitable for high-impedance receive-side routing, and the specified 185 ns off-time permits rapid isolation between paths. The improved 3 ohm channel matching and 4 ohm flat-on-resistance limits support more uniform behavior than unmatched general-purpose switches. In higher-impedance or wider-band networks, evaluate capacitance, insertion loss, and signal-level limits across the complete operating frequency range before fixing the design.
Recommended
Guidance and Control Systems
The DG419LDJ+ provides a compact SPDT routing element for guidance, control, and industrial instrumentation systems that need to connect one command or feedback signal to one of two destinations. Its -40°C to +85°C rating supports a broad range of industrial ambient conditions, and the PDIP package simplifies through-hole assembly in control hardware. The 35 ohm on-resistance is appropriate for many high-impedance sensor and control paths, but designers should verify the driven input impedance. The 10 pC charge-injection limit should also be considered when switching sampled control signals into precision acquisition circuitry.
Recommended
Military Radio Signal Routing
The DG419LDJ+ can serve as a precision SPDT switch in military radio and ruggedized communication equipment where one RF-control or low-frequency signal path must be selected between two sources. The guaranteed 3 ohm on-resistance matching and 4 ohm flat-on-resistance variation help reduce channel-dependent behavior, while the 2000 V minimum ESD withstand rating provides an identifiable robustness specification. Through-hole packaging supports serviceable and mechanically rugged assemblies. Signal engineers should still verify bandwidth, insertion loss, isolation, and permissible signal amplitude for the intended radio frequency rather than relying on the DC on-resistance alone.
Recommended
Precision Signal Isolation
The DG419LDJ+ is useful for isolating one of two low-level analog inputs while routing a common signal elsewhere. Its off-leakage below 5 nA at +85°C limits unwanted coupling from disconnected paths, and the low 10 pC maximum charge injection helps control switching transients in precision measurement systems. The extended temperature range of -40°C to +85°C supports industrial environments. For high-accuracy front ends, verify leakage over the actual signal amplitude and temperature, account for charge injection during acquisition, and provide local supply bypassing to minimize supply-linked transients.
Recommended
Recommended Products Summary
Engineering reference data for DG419LDJ+ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DG419LDJ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP |
| Configuration | 1 x SPDT | 1 x SPDT |
| Maximum On-Resistance | 35 ohm | 35 ohm maximum for the DG419 family |
| Minimum Dual-Supply Voltage | ±4.5 V | ±4.5 V |
| Maximum Dual-Supply Voltage | ±20 V | ±20 V |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C for the DG419L family |
| Mounting Type | Through-hole | Through-hole |
| Logic Compatibility | +3 V compatible at ±12 V or ±15 V supply | +3 V compatible at ±12 V or ±15 V supply |
Key Differentiators
- Through-hole routing option (vs DG419LDY+)
- Guaranteed flat on-resistance (vs DG419LDJ)
- Precision channel matching (vs DG419LDJ)
Design Notes
Route the common and switched signal terminals as short, controlled-impedance paths, especially when the selected source has a high bandwidth. Keep the analog signal traces away from the control input and supply pins to reduce capacitive coupling from switching edges. For the DIP outline, place a ground or supply-return guard where practical, but avoid long traces that could create an unintended antenna. Follow the pin and layout guidance in the manufacturer datasheet for the exact board implementation.
Decouple each supply rail directly at the device with a local low-inductance capacitor and provide a close ground return. The DG419LDJ+ requires dual supplies of at least ±4.5 V, so a 3.3 V-only system needs rail generation before the switch is enabled. Confirm control-pin levels for the selected supply condition; the +3 V compatibility statement applies to operation from ±12 V or ±15 V. Keep supply transients within the ±20 V maximum dual-supply rating.
Include switch capacitance, on-resistance, charge injection, and off-leakage in the signal-path error budget. The 35 ohm maximum on-resistance is usually most appropriate for high-impedance sources, while its 10 pC maximum charge injection can create a transient step when switching sampled signals. Capture a settled sample after each state change when the acquisition chain is sensitive to switching transients. Verify the complete bandwidth response rather than inferring it from DC resistance.
Do not treat DG419LDY+ as a direct replacement for DG419LDJ+ because the former uses an 8-pin SOIC footprint and the latter uses an 8-pin PDIP footprint. Likewise, do not infer single-supply operation from the +3 V logic-compatible description. Confirm supply polarity, control thresholds, terminal mapping, and signal limits against the manufacturer datasheet. The + marking is an ordering suffix and should be preserved when requesting the exact PDIP part.
Compliance Information
The DG419 family is identified as production by Analog Devices, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not established for this exact orderable in the available information.