Silicon Labs

EFM32G842F64G-E-QFP64 - 32MHz Cortex-M3 64KB MCU | Silicon Labs

MPN: EFM32G842F64G-E-QFP64 ✓ Active
1.98 V to 3.8 V Vdss 0.6 uA Id 64-TQFP, 10 x 10 mm Package 32 MHz Speed 64 kB Memory
MOQ: 1 |

EFM32G842F64G-E-QFP64 Overview

The Silicon Labs EFM32G842F64G-E-QFP64 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 64 kB of embedded Flash, 16 kB of SRAM, and 53 digital I/O pins in a 64-TQFP 10 x 10 mm package. It combines a low-power operating architecture with fast wake-up capability and energy-saving modes for battery-powered and energy-conscious equipment.

An energy-efficient microcontroller is a semiconductor that executes embedded control functions while minimizing energy consumption during active operation and idle periods. The EFM32G family belongs to the hierarchy of 32-bit MCU, embedded processor, embedded controller, and semiconductor. This positioning makes the EFM32G842 suitable for portable sensing, industrial control, connected instrumentation, and compact automation products where sleep current and recovery time influence the overall duty cycle.

Three principal specifications define the EFM32G842F64: its 32 MHz Cortex-M3 core, 64 kB Flash allocation for firmware, and 16 kB SRAM for working data. The device also provides 53 digital I/O pins, three 16-bit timers, a 4 x 22 LCD controller, and AES hardware, according to the Silicon Labs product listing and EFM32G family datasheet. These resources support responsive control loops, direct segment or matrix LCD displays, and encrypted communication routines without requiring separate peripheral chips.

The EFM32G low-power platform supports energy-saving operating states and rapid wake-up behavior. The EFM32G family datasheet states that devices can consume as little as 0.6 uA in Stop mode and approximately 180 uA/MHz in Run mode. These figures are important in duty-cycled systems because average system power depends on both active processing time and the duration of the low-power state between measurement or communication events.

Typical uses include portable environmental monitors, compact industrial controllers, low-power sensor nodes, security and access modules, and LCD-equipped measurement instruments. The 64 kB Flash capacity is suitable for moderate embedded applications, while the 53 available I/O pins reduce the need for I/O expanders in designs with sensors, switches, indicators, and display connections.

PCB planning should begin with the manufacturer's 64-pin package drawing and land pattern. Route the 1.98 V to 3.8 V supply through a low-impedance plane, place the recommended bypass capacitors near the power pins, and keep sensitive analog or communication traces away from high-current switching nodes. Confirm the exact pin multiplexing and peripheral assignments against the device datasheet before finalizing the board layout.

This page combines device specifications, family-level drop-in alternatives, application guidance, comparison parameters, and PCB design considerations to support faster component selection and first-board design.

Drop-in alternatives for EFM32G842F64G-E-QFP64 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with EFM32G842F64G-E-QFP64 (same form factor and footprint) — differing in Digital I/O Pins, Package, Security Feature, Timers.

Silicon Labs
Digital I/O Pins: 53
Package: 64-TQFP, 10 mm × 10 mm
Security Feature: AES feature indicated by distributor listings
Compare with EFM32G842F64G-E-QFP64 →

EFM32G842F64-QFP64

✅ Drop-In
Silicon Labs
📦 TQFP-64 (10x10 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 64 kB · 16 kB · 53 · 3 × 16-bit · 1.98 V to 3.8 V

Contact for price

View Datasheet →

EFM32G842F64G-C-QFP64

✅ Drop-In
📦 TQFP-64 (10x10 mm)
Same 64 kB Flash, 16 kB RAM, 32 MHz Cortex-M3, and TQFP-64 footprint; the C ordering code represents a different delivery or grade option.

📋 Reference alternative (not in catalog)

EFM32G842F128G-E-QFP64

✅ Drop-In
📦 TQFP-64 (10x10 mm)
Flash increases from 64 kB to 128 kB, a +100% memory increase, while retaining the 32 MHz Cortex-M3 core and 64-TQFP package.

📋 Reference alternative (not in catalog)

EFM32G880F128G-E-QFP64

✅ Drop-In
📦 TQFP-64 (10x10 mm)
Provides 128 kB Flash instead of 64 kB, +100%, with a related Gecko peripheral configuration in the same 64-TQFP footprint.

📋 Reference alternative (not in catalog)

EFM32G890F128G-QFP64

✅ Drop-In
📦 TQFP-64 (10x10 mm)
Offers 128 kB Flash, +100% versus the target, and a related Gecko feature set in the same 64-TQFP package; peripheral assignments must be verified.

📋 Reference alternative (not in catalog)

EFM32G840F64G-QFP64

✅ Drop-In
📦 TQFP-64 (10x10 mm)
Retains the 64 kB Flash class and 64-TQFP footprint but omits the E ordering suffix and has a slightly different peripheral feature set.

📋 Reference alternative (not in catalog)

EFM32G842F64G-E-QFP64 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 64 kB
Flash Organization 64K x 8 bits
RAM 16 kB
Digital I/O Pins 53 pins
Timers 3 x 16-bit timers
LCD Controller 4 x 22 LCD segments
Security Feature AES hardware encryption
Supply Voltage Range 1.98 V to 3.8 V
Package 64-TQFP, 10 x 10 mm
Pin Count 64 pins
Mounting Type Surface mount
Family Stop-Mode Current 0.6 uA
Family Run-Mode Current 180 uA/MHz

EFM32G842F64G-E-QFP64 64-tqfp, 10 x 10 mm Pin Configuration Guide

Pin configuration for EFM32G842F64G-E-QFP64 (64-tqfp, 10 x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-tqfp, 10 x 10 mm package pinout diagram for EFM32G842F64G-E-QFP64

No detailed pinout data available for EFM32G842F64G-E-QFP64.

Refer to the datasheet for full pin configuration.

Typical Applications

EFM32G842F64G-E-QFP64 is suitable for 6 applications: Battery-Powered Environmental Sensor Node, Industrial Control and Automation Module, LCD-Equipped Measurement Instrument, Low-Power IoT Gateway and Controller, Access Control and Security Module, Portable Medical or Wellness Monitor.

🧩

Battery-Powered Environmental Sensor Node

The EFM32G842F64G-E-QFP64 fits compact environmental sensors that periodically measure temperature, humidity, gas, or particulate conditions and transmit the results over a low-power serial link. Its 32 MHz Cortex-M3 core provides sufficient control performance, while 64 kB Flash accommodates the acquisition logic and protocol stack and 16 kB RAM supports working buffers. The EFM32G family's Stop-mode current can reach 0.6 uA, allowing the design to remain in a deep sleep state between measurements. Use the low-power wake-up path and duty-cycle scheduling to minimize radio and sensor duty cycles, then verify the complete peripheral configuration in the manufacturer datasheet.

🏭

Industrial Control and Automation Module

The EFM32G842F64G-E-QFP64 is suitable for compact PLC-adjacent modules, condition-monitoring controllers, and industrial I/O concentrators that need deterministic control with limited board area. Its 53 digital I/O pins can connect discrete sensors, relay-control logic, status indicators, and industrial interfaces without requiring a large pin-count expansion device. Three 16-bit timers support periodic sampling, input capture, or output timing, and the 1.98 V to 3.8 V range accommodates regulated 3.3 V systems. Keep switching-node current away from sensitive signal paths, provide local bypass capacitance, and validate timing margins against the 32 MHz operating limit.

📺

LCD-Equipped Measurement Instrument

The EFM32G842F64G-E-QFP64 works well in handheld meters, panel instruments, and calibration equipment that combine local measurement control with a display. Its integrated 4 x 22 LCD controller can drive segment-based displays while reducing the need for an external driver, and the 64-TQFP package leaves the perimeter available for switches, a sensor interface, and communication circuitry. The 64 kB Flash supports display and calibration algorithms while 16 kB RAM holds acquisition samples and menu state. Consider resistor sizing and LCD bias requirements from the manufacturer application guidance, and account for the display's idle current when evaluating battery life.

🌐

Low-Power IoT Gateway and Controller

The EFM32G842F64G-E-QFP64 can serve as the local controller in an IoT gateway that aggregates sensor inputs, manages a display or keypad, and maintains a low-power serial connection to a remote network. Its 32 MHz Cortex-M3 performance supports protocol handling and event scheduling, while the Gecko energy-saving modes help separate short active bursts from long idle periods. AES hardware is useful for protecting link or application data without occupying the CPU with repetitive encryption tasks. Because low-power performance depends on firmware and peripheral configuration, enable only the required peripherals during sleep and confirm wake sources in the device reference material.

🔒

Access Control and Security Module

The EFM32G842F64G-E-QFP64 fits electronic locks, credential readers, and small access-control nodes that require cryptographic support alongside general-purpose control. The integrated AES hardware accelerates symmetric encryption routines, and the 53 available digital I/O pins can serve keypad scanning, indicator control, relay drive, and peripheral status inputs. Its low-power operating characteristics are valuable in battery-backed installations where maintenance access is infrequent. Use a hardware-backed key-management strategy, keep debug access controlled during production, and follow the manufacturer recommendations for supply filtering and decoupling near the security-sensitive device.

💊

Portable Medical or Wellness Monitor

The EFM32G842F64G-E-QFP64 can support compact wellness and diagnostic-adjacent products that sample low-bandwidth sensors and maintain local control logic. The 32 MHz Cortex-M3 core handles sequencing and signal conditioning, while 64 kB Flash accommodates algorithms and 16 kB RAM holds sample histories. Its low-power modes and fast wake-up behavior suit products that must remain responsive without continuously running the processor. For any medical application, validate the complete signal chain, accuracy, safety controls, and regulatory obligations independently; this component specification alone does not establish clinical or diagnostic suitability.

Recommended Products Summary

EFM32G842F64-QFP64 Silicon Labs Used in: Battery-Powered Environmental Sensor Node, Low-Power IoT Gateway and Controller, Portable Medical or Wellness Monitor EFM32G842F32-QFP64 Silicon Labs Used in: Battery-Powered Environmental Sensor Node EFM32G842F128G-E-QFP64 Higher-memory controller for larger firmware Used in: Industrial Control and Automation Module, LCD-Equipped Measurement Instrument, Access Control and Security Module, Portable Medical or Wellness Monitor EFM32G880F128G-E-QFP64 Related Gecko MCU with expanded memory Used in: Industrial Control and Automation Module EFM32G842F64G-C-QFP64 Same-device ordering option Used in: LCD-Equipped Measurement Instrument, Access Control and Security Module EFM32G890F128G-QFP64 Related controller with expanded Flash Used in: Low-Power IoT Gateway and Controller
What is the EFM32G842F64G-E-QFP64?
The EFM32G842F64G-E-QFP64 is a Silicon Labs 32-bit microcontroller built around an ARM Cortex-M3 processor operating up to 32 MHz. It provides 64 kB of Flash, 16 kB of RAM, 53 digital I/O pins, three 16-bit timers, a 4 x 22 LCD controller, and AES hardware in a 64-TQFP 10 x 10 mm package. According to the Silicon Labs EFM32G datasheet, the Gecko platform also emphasizes low-power operation and fast wake-up behavior.
How much Flash and RAM does the EFM32G842F64G-E-QFP64 have?
The EFM32G842F64G-E-QFP64 includes 64 kB of Flash and 16 kB of RAM. Flash is organized as 64K x 8 bits and stores the application firmware, while SRAM provides working memory for stacks, buffers, peripheral state, and real-time control data. These resources position the device for moderate embedded applications rather than graphics-intensive workloads. Confirm the final firmware footprint and runtime stack requirement during application development.
What is the maximum operating frequency of the EFM32G842F64G-E-QFP64?
The maximum operating frequency of the EFM32G842F64G-E-QFP64 is 32 MHz. This clock rate is provided by the ARM Cortex-M3 core and supports deterministic control loops, communication handling, and peripheral servicing in embedded systems. The actual run-time performance depends on flash wait states, peripheral activity, bus contention, and the selected clock configuration, so system timing should be evaluated with the manufacturer clock and power-management guidance.
What is the supply voltage range of the EFM32G842F64G-E-QFP64?
The EFM32G842F64G-E-QFP64 operates from 1.98 V to 3.8 V according to the device specifications. This low-voltage range supports battery-powered systems using one or two lithium-ion cells, regulated 3.3 V industrial rails, and energy-harvesting arrangements where a stable internal rail is required. The power system must also respect the core, analog, and I/O voltage limits shown in the manufacturer datasheet.
What are the key specifications engineers should know about EFM32G842F64G-E-QFP64?
The key specifications are a 32 MHz ARM Cortex-M3 core, 64 kB Flash, 16 kB RAM, and 53 digital I/O pins. The device also includes three 16-bit timers, a 4 x 22 LCD controller, AES hardware, and a 1.98 V to 3.8 V operating range. Silicon Labs packages it in a 64-TQFP 10 x 10 mm outline, while the EFM32G family datasheet reports Stop-mode consumption as low as 0.6 uA.
Where can I download the EFM32G842F64G-E-QFP64 datasheet PDF?
The official EFM32G family datasheet PDF is available from Silicon Labs at the manufacturer URL listed on this page. The document contains the detailed electrical characteristics, memory map, peripheral descriptions, clock configuration, package drawings, and recommended operating conditions. Use the EFM32G842 device information together with the family datasheet because the document covers several memory and package configurations. The manufacturer documentation should be the authority when assigning pins and power rails.
Where can I find the EFM32G842F64G-E-QFP64 pinout?
The EFM32G842F64G-E-QFP64 pinout is found in the pin-definition and package-layout sections of the Silicon Labs EFM32G family datasheet. The device uses a 64-TQFP 10 x 10 mm package, so the physical drawing must be cross-checked against the board footprint before routing begins. Pin multiplexing can vary by peripheral configuration, and several alternate functions may share the same physical pad. Assign signals using the manufacturer pin-description table and the selected device variant.
Is the EFM32G842F64G-E-QFP64 suitable for battery-powered devices?
Yes, the EFM32G842F64G-E-QFP64 is suitable for battery-powered devices because the EFM32G platform provides low-power operating states and rapid wake-up behavior. The family datasheet reports consumption as low as 0.6 uA in Stop mode and approximately 180 uA/MHz in Run mode. Actual battery life depends on the duty cycle, sensor load, display usage, wake-up frequency, regulator efficiency, and whether the design keeps the MCU in its deepest practical sleep state.
What is the difference between EFM32G842F64G-E-QFP64 and EFM32G842F64-QFP64?
The EFM32G842F64G-E-QFP64 is the grade and packaging designation of the EFM32G842F64-QFP64 device, while the shortened listing identifies the underlying Gecko device with 64 kB Flash and 16 kB RAM. Both are identified in the manufacturer materials as 32 MHz ARM Cortex-M3 microcontrollers in a 64-TQFP 10 x 10 mm package. The ordered suffix determines ordering code, grade, and delivery format, so confirm those attributes before treating either listing as interchangeable.
When should I choose the EFM32G842F64G-E-QFP64 over EFM32G842F128G-E-QFP64?
Choose the EFM32G842F64G-E-QFP64 when 64 kB of Flash and 16 kB of RAM satisfy the firmware and runtime requirements. Choose the EFM32G842F128G-E-QFP64 when the application needs greater code or data capacity while retaining the same 32 MHz Cortex-M3 architecture, 64-TQFP footprint, and 53 digital I/O pins. The higher-memory device can simplify future feature expansion, but the extra capacity is useful only when the firmware, logging, protocol stacks, or update buffers genuinely require it.
Can EFM32G842F128G-E-QFP64 replace EFM32G842F64G-E-QFP64?
The EFM32G842F128G-E-QFP64 is a same-family option for designs that can accommodate its larger memory configuration. It uses the same 64-TQFP 10 x 10 mm package and ARM Cortex-M3 platform, but it provides 128 kB of Flash rather than 64 kB. This is a capacity upgrade rather than an exact part substitution. Before replacing the component, verify the complete pin configuration, boot options, firmware memory map, and whether the added memory changes cost or supply requirements.
What is the best drop-in replacement for the EFM32G842F64G-E-QFP64?
The closest same-family alternatives are EFM32G842F64-QFP64, EFM32G842F64G-C-QFP64, and EFM32G842F128G-E-QFP64, all associated with the EFM32G842 or related Gecko device family in the 64-TQFP footprint. The best fit depends on whether the original purchase required the exact grade and delivery suffix or only equivalent processing resources. A replacement should be validated against the pin descriptions, clock settings, memory map, and operating requirements in the manufacturer documentation.
What can replace the EFM32G842F64G-E-QFP64 on an existing PCB?
A PCB-compatible replacement must use the 64-TQFP 10 x 10 mm footprint and provide the required Cortex-M3 peripherals, I/O, voltage range, and memory configuration. EFM32G842F64-QFP64 is the closest lower-suffix option, while EFM32G842F128G-E-QFP64 offers the same footprint with more Flash. Cross-brand MCUs are not automatically drop-in replacements because peripheral registers, interrupt priorities, analog blocks, and bootloader behavior may differ even when the package is identical.
Where can I buy the EFM32G842F64G-E-QFP64 online?
Use the Request a Quote form on this page to request the EFM32G842F64G-E-QFP64 and confirm current stock, minimum order quantity, and delivery scheduling. Quote-based purchasing is appropriate for programmed industrial, medical, and instrumentation designs where lifecycle continuity and traceability matter. Provide the exact ordered MPN, target quantity, and required delivery date so the production schedule and any date-code or traceability requirements can be confirmed.
What is the lead time for the EFM32G842F64G-E-QFP64?
The current lead time for the EFM32G842F64G-E-QFP64 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production scheduling, and inventory position, so a quantity-specific quote is more useful than a generic availability statement. Include your required delivery date and packaging preference when requesting the quotation. For scheduled production programs, ask for a rolling forecast and any advance-notification requirements.

Engineering reference data for EFM32G842F64G-E-QFP64 — comparison, design guidance, and compliance information.

Selection Guide

Choose the EFM32G842F64G-E-QFP64 when the design needs a 32 MHz Cortex-M3 core, 64 kB Flash, 16 kB RAM, 53 I/O pins, LCD control, AES hardware, and low-power operation in a 64-TQFP package. Select EFM32G842F64-QFP64 when its ordering and grade attributes satisfy the production requirements, and use EFM32G842F64G-C-QFP64 when that ordering code matches the required delivery configuration. Choose EFM32G842F128G-E-QFP64 when additional Flash is needed for logging, protocol stacks, or future expansion. EFM32G880F128G-E-QFP64 and EFM32G890F128G-QFP64 can suit designs needing more memory and related Gecko peripherals, but their feature differences require a pin and register review. A cross-brand Cortex-M3 MCU in the same package is not automatically interchangeable because peripherals, interrupts, analog blocks, and software ecosystems may differ.

Comparison with Alternatives

Parameter This Product EFM32G842F64-QFP64 EFM32G842F64G-C-QFP64 EFM32G842F128G-E-QFP64 EFM32G880F128G-E-QFP64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package TQFP-64 (10x10 mm) TQFP-64 (10x10 mm) - same footprint TQFP-64 (10x10 mm) - same footprint TQFP-64 (10x10 mm) - same footprint TQFP-64 (10x10 mm) - same footprint
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 kB 64 kB 64 kB 128 kB (+100%) 128 kB (+100%)

Key Differentiators

  • Direct memory and peripheral fit for Gecko designs (vs EFM32G842F64-QFP64)
  • Memory expansion without changing the board footprint (vs EFM32G842F128G-E-QFP64)
  • Low-power architecture for duty-cycled products (vs EFM32G840F64G-QFP64)

Design Notes

Design the supply around the 1.98 V to 3.8 V operating range and place the recommended bypass capacitors directly beside the corresponding power pins. For battery systems, include a regulator whose quiescent current is small relative to the MCU's Stop-mode consumption; otherwise regulator leakage can dominate the sleep budget. Keep analog, digital, and switched-capacitor return paths separated where the pin table permits, and verify the core voltage during startup and low-battery operation.

Use the manufacturer's 64-TQFP 10 x 10 mm land pattern and follow the package drawing for pad dimensions, solder-mask clearance, and copper-defined pads. Place input and output decoupling at the pins rather than at a distant power entry point, and keep the exposed perimeter route free of unnecessary copper if the assembly process requires a defined clearance. Confirm each signal's alternate-function mapping because several 64-pin MCU pads can serve multiple peripheral functions.

Do not treat a same-package 64-TQFP MCU as an automatic cross-brand substitute. Although footprint dimensions match, pin multiplexing, peripheral registers, interrupt priorities, analog characteristics, bootloader behavior, and programming tools can differ. For a redesign, create a pin-to-pin function matrix covering power, ground, reset, debug, clock, communications, and every used GPIO. For an EFM32 family replacement, also update startup code, linker configuration, flash wait-state settings, and peripheral drivers.

Estimated: at a 3.3 V supply and 20 mA average operating current, the estimated device power is 3.3 V x 0.020 A = 0.066 W. This calculation excludes external load power and does not replace the manufacturer's maximum ratings. The resulting junction temperature is normally dominated by PCB copper and ambient conditions rather than the MCU itself, but temperature rise should still be checked when the package is surrounded by heat-generating components or enclosed in a non-ventilated enclosure.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product and datasheet links identify the EFM32G842 as an EFM32 Gecko microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated on the cited product page.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

EFM32G842F64G-E-QFP64 datasheet EFM32G842F64G-E-QFP64 pinout EFM32G842F64G-E-QFP64 datasheet pdf EFM32G842F64G-E-QFP64 specifications EFM32G842F64G-E-QFP64 price EFM32G842F64G-E-QFP64 stock EFM32G842F64G-E-QFP64 equivalent EFM32G842F64G-E-QFP64 replacement EFM32G842F64G-E-QFP64 vs EFM32G842F128G-E-QFP64 Silicon Labs EFM32G842F64G-E-QFP64 EFM32G842F64 TQFP-64 footprint EFM32G842F64 low power mode EFM32G842F64 Cortex-M3 32MHz EFM32G842F64 battery powered application

Related Components & Terms

Silicon Labs EFM32G842F64G-E-QFP64 EFM32G842F64-QFP64 EFM32G842F64G-C-QFP64 EFM32G842F128G-E-QFP64 EFM32G880F128G-E-QFP64 EFM32G890F128G-QFP64 EFM32G840F64G-QFP64 EFM32 Gecko ARM Cortex-M3 32-bit microcontroller embedded processor semiconductor low-power MCU TQFP-64 10 x 10 mm package surface mount embedded Flash static RAM digital I/O 16-bit timer LCD controller AES hardware Stop mode battery-powered system
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details