EFM32WG842F64-B-QFP64 - 48MHz Cortex-M4F | Silicon Labs
MPN: EFM32WG842F64-B-QFP64 ✓ ActiveEFM32WG842F64-B-QFP64 Overview
An ARM Cortex-M4F microcontroller is a 32-bit embedded processor in the ARM Cortex-M product family. The M4F architecture adds floating-point capability to the efficient Thumb instruction set, allowing higher-performance control algorithms without the complexity of a larger application processor. Within the device hierarchy, this part belongs to the EFM32 Wonder Gecko family of energy-conscious microcontrollers for industrial and consumer electronics.
The EFM32WG842F64-B-QFP64 provides 64 KB of Flash for firmware, 32 KB of SRAM for working memory, and up to 53 digital I/O pins according to the manufacturer product information. Its key strengths include a 48 MHz maximum clock, integrated low-power operating modes, fast wake-up behavior, and a broad set of timers and communication peripherals. These characteristics support responsive control loops while allowing the processor to remain in low-power states during idle periods.
The 64-TQFP package exposes more I/O than smaller EFM32 packages and is suitable for boards that require external memory interfaces, multiple serial peripherals, or a substantial number of sensor and control connections. The Cortex-M4F core supports DSP-oriented and floating-point control tasks, while the 64 KB Flash capacity is appropriate for moderate application code, configuration tables, and real-time control firmware.
Typical applications include industrial sensor nodes, energy meters, building-control equipment, portable instruments, connected accessories, and compact consumer devices. Its 53 digital I/O pins can support discrete inputs, status indicators, communications, and actuator control. For designs constrained by board area, the 10 mm by 10 mm TQFP is larger than a QFN option but remains straightforward to assemble, inspect, and rework.
Designers should use the manufacturer's pin-description table when assigning tracks and confirm the selected board revision against the exact -B-QFP64 ordering code. Pay particular attention to supply decoupling, exposed debug-programming signals, peripheral multiplexing, and the voltage level of connected sensors. The manufacturer datasheet should govern pin multiplexing, clock configuration, memory limits, and electrical characteristics.
This page consolidates the manufacturer data, distributor listings, package information, compatible family options, and application guidance needed to evaluate the EFM32WG842F64-B-QFP64 for a new 64-pin embedded control design.
Drop-in alternatives for EFM32WG842F64-B-QFP64 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with EFM32WG842F64-B-QFP64 (same form factor and footprint) — differing in Architecture, Package, Product Type, Series, Digital I/O Pins.
EFM32WG842F64-B-QFP64R
✅ Drop-In📋 Reference alternative (not in catalog)
EFM32WG842F64-QFP64
✅ Drop-InContact for price
View Datasheet →EFM32G842F64-QFP64
✅ Drop-InContact for price
View Datasheet →EFM32WG842F64-B-QFP64 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | EFM32 Wonder Gecko |
| Maximum CPU Frequency | 48 MHz |
| Architecture | 32-bit ARM Cortex-M4F |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| RAM Size | 32K x 8 bits |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Digital I/O Pins | 53 pins |
| Package | 64-TQFP, 10 mm x 10 mm |
| Mounting Type | Surface mount |
| Core Count | 1 core |
| Program Memory Type | Flash |
| Product Category | Microcontroller, 32-bit, single core |
| Application Classification | Industrial and consumer electronics |
EFM32WG842F64-B-QFP64 64-tqfp, 10 mm x 10 mm Pin Configuration Guide
Pin configuration for EFM32WG842F64-B-QFP64 (64-tqfp, 10 mm x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for EFM32WG842F64-B-QFP64.
Refer to the datasheet for full pin configuration.
Typical Applications
EFM32WG842F64-B-QFP64 is suitable for 6 applications: Industrial Sensor Node, Energy Metering System, Building Control Equipment, Connected Measurement Instrument, Battery-Powered Portable Device, Industrial Communication Gateway.
Industrial Sensor Node
The EFM32WG842F64-B-QFP64 is suitable for an industrial sensor node that combines several digital sensors with a local communications interface. Its 53 digital I/O pins provide ample connections for digital inputs, alarm outputs, status indicators, and peripheral control, while the 48 MHz Cortex-M4F core can execute filtering and compensation routines with floating-point support. The 64 KB of Flash accommodates embedded firmware, calibration constants, and configuration tables, and the 32 KB of SRAM supports working buffers. Operating from 1.98 V to 3.8 V allows integration into 2.5 V or 3.3 V sensor systems. The principal design consideration is verifying the selected peripheral assignments and environmental qualification for the deployment location.
Recommended
Energy Metering System
The EFM32WG842F64-B-QFP64 can serve as the control processor for a compact energy-metering system requiring real-time measurement, local storage, and user communication. Its 48 MHz Cortex-M4F processor provides computational headroom for digital filtering and floating-point calculations, while the 64 KB of Flash stores firmware and calibration data and the 32 KB of SRAM handles measurement buffers. The 53 digital I/O pins can support metering-stage control signals, tamper inputs, display interfaces, and communication peripherals. A 1.98 V to 3.8 V operating range supports low-voltage system rails. Design the power subsystem and printed circuit board for metering accuracy, and use the manufacturer electrical and pin-assignment tables when allocating analog-related control functions.
Recommended
Building Control Equipment
The EFM32WG842F64-B-QFP64 fits building-control equipment that coordinates sensors, actuators, and serial interfaces on a single embedded controller. Its 64-pin package offers 53 digital I/O pins, providing greater routing flexibility than smaller microcontroller packages for relay outputs, occupancy inputs, and communications. The Cortex-M4F core can execute control logic and floating-point calculations at up to 48 MHz, while 64 KB of Flash is suitable for application firmware and configuration data. Low-power operating modes are valuable in controllers that spend substantial time waiting for scheduled events. Use the exact pin-multiplexing table to avoid conflicts among communication peripherals, timers, and general-purpose I/O, and confirm operating-temperature requirements for the intended installation environment.
Recommended
Connected Measurement Instrument
The EFM32WG842F64-B-QFP64 is appropriate for a connected measurement instrument requiring deterministic control, moderate program storage, and multiple peripheral connections. The 48 MHz Cortex-M4F core supports responsive acquisition control and numerical processing, while its floating-point capability assists with calibration and unit conversion. Sixty-four KB of Flash is suitable for a focused firmware image, and the 32 KB of RAM can hold acquisition and protocol buffers. Its 53 digital I/O pins can connect instrument controls, status signals, displays, and external interface hardware. The 64-TQFP footprint is comparatively easy to route and inspect, although a QFN alternative may be preferable where board area is critical. Verify clock accuracy, expansion-interface requirements, and acquisition timing during component selection.
Recommended
Battery-Powered Portable Device
The EFM32WG842F64-B-QFP64 can support a battery-powered portable device that balances processing performance with low-power operation. The Cortex-M4F core operates up to 48 MHz for active measurement or communications and can return to low-energy modes during inactivity, as described for the EFM32 Wonder Gecko family. The 64 KB of Flash limits firmware footprint, which can help simplify the application and preserve battery capacity. Its 1.98 V to 3.8 V supply range supports low-voltage designs, while 53 digital I/O pins provide flexibility for user inputs, display control, and external interface functions. Carefully evaluate average current, wake-up latency, regulator efficiency, and active-state duration because peak processing speed alone does not determine battery life.
Recommended
Industrial Communication Gateway
The EFM32WG842F64-B-QFP64 is a useful controller for an industrial communication gateway that must translate between local sensors, actuators, and a higher-level network. Its 48 MHz Cortex-M4F core provides sufficient throughput for protocol processing and control logic, while the floating-point unit assists numerical filtering and signal calculations. The device supplies 64 KB of Flash and 32 KB of SRAM, making it appropriate for gateways with tightly bounded firmware and buffering requirements. The 53 digital I/O pins can support status signals, configuration inputs, and ancillary interfaces. A 64-pin TQFP also leaves adequate routing flexibility for power, clock, and communications. Confirm each peripheral instance, interrupt priority, pin multiplexing, and interface voltage against the manufacturer documentation before freezing the schematic.
Recommended
Recommended Products Summary
Engineering reference data for EFM32WG842F64-B-QFP64 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | EFM32WG842F64-B-QFP64R | EFM32WG842F64-QFP64 | EFM32G842F64-QFP64 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) |
| CPU Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M3 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| Series | Wonder Gecko | Wonder Gecko | Wonder Gecko | Gecko |
| Floating-Point Capability | Yes, Cortex-M4F | Yes, Cortex-M4F | Yes, Cortex-M4F | No, Cortex-M3 |
| RAM Size | 32K x 8 bits | 32K x 8 bits | 32K x 8 bits | 16 KB |
Key Differentiators
- Higher processing performance with floating-point support (vs EFM32G842F64-QFP64)
- More RAM than the earlier 64-pin Gecko option (vs EFM32G842F64-QFP64)
- Direct same-device option with reel-ordering suffix (vs EFM32WG842F64-B-QFP64R)
Design Notes
Use the Silicon Labs EFM32WG datasheet to identify every supply pin and its permitted operating range before laying out the power network. Place the required decoupling capacitors directly beside the associated supply and ground pins, and keep high-current switching-node copper away from sensitive analog and communication traces. The device supports a 1.98 V to 3.8 V operating range, but connected peripherals must share compatible logic levels. Verify startup, brownout, and sleep-mode behavior with the selected regulator rather than assuming that all system rails can collapse immediately.
Assign all 64 package positions from the manufacturer pin-description table and preserve each pin's alternate-function requirements. Route debug and programming signals for reliable access, keep ground returns continuous, and account for the thermal behavior of the 10 mm by 10 mm TQFP. Although the package has no externally exposed thermal pad, its thermal performance still depends on board construction. Use conservative signal-length and return-path planning for external interfaces, especially where the board includes sensors, radio circuitry, or long copper runs.
Do not treat a same-package MCU as an automatic substitute. The EFM32WG842F64-B-QFP64 uses a 48 MHz Cortex-M4F core, while the EFM32G842F64-QFP64 uses a 32 MHz Cortex-M3 core; their RAM sizes and peripheral resources also differ. Revalidate startup code, linker limits, interrupt assignments, peripheral instances, clock trees, and pin multiplexing after any substitution. Also check the ordering suffix and package drawing to prevent assembly errors even when the visible device names appear similar.
Plan the board around the EFM32WG842F64-B-QFP64's 53 digital I/O pins and its need for clean external connections. Group related interfaces by function, maintain short return paths beneath communication and sensor nets, and reserve unobstructed access to programming and debug signals. If the design includes an oscillator, follow the manufacturer's recommended layout and grounding method. Keep high-speed or switching circuitry away from sensitive sensor inputs to minimize substrate and conducted coupling through the shared ground network.
Compliance Information
No explicit compliance statement for the exact EFM32WG842F64-B-QFP64 ordering code appears in the manufacturer listing. Review the current Silicon Labs product page and declarations before using the part in a regulated application.