FDA903Q - 1A, 35V Ultra-Low Noise LDO | Texas Instruments
MPN: FDA903Q β Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $4.85 | $4.85 |
| 10 | $4.36 | $43.60 |
| 100 | $3.88 | $388.00 |
| 500 | $3.49 | $1,745.00 |
| 1,000 | $3.1 | $3,100.00 |
Drop-in alternatives for FDA903Q β same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool β Select alternative parts for side-by-side comparison:
TPS7A4700RGWR
β Drop-Inπ Reference alternative (not in catalog)
TPS7A4701RGWR-Q1
β Drop-Inπ Reference alternative (not in catalog)
TPS7A4701RGWT
β Drop-Inπ Reference alternative (not in catalog)
LT3045EDC
β Drop-Inπ Reference alternative (not in catalog)
ADM7150ARDZ
β Drop-Inπ Reference alternative (not in catalog)
FDA903Q Maximum Ratings & Electrical Characteristics
| Output Type | Adjustable |
| Output Voltage Range | 1.4 V to 34 V |
| Maximum Output Current | 1 A |
| Input Voltage Range | 3 V to 35 V |
| Dropout Voltage | 200 mV at 1 A |
| Output Noise | 4.17 uVrms (20 Hz to 100 kHz) |
| PSRR | 72 dB at 1 kHz |
| Quiescent Current | 6.4 mA |
| Thermal Resistance | 31.4 C/W |
| Operating Temperature | -40C to +125C |
| Package | VQFN-20 (RGW) 5x5 mm |
| Mounting Type | Surface Mount |
| MSL Level | 2 (1 year) |
| RoHS Status | Compliant |
| Enable Pin | Yes (active-high) |
FDA903Q Pin Configuration
| Pin 1 | OUT β Regulated output voltage |
| Pin 5 | GND β Ground |
| Pin 6 | EN β Enable (active high) |
| Pin 7 | IN β Input supply |
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this component. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
FDA903Q is suitable for 6 applications: High-End Audio DAC Power Supply, RF Transceiver Power Supply, Precision ADC/DAC Reference, Industrial Sensor Interface, Test and Measurement Equipment, Portable Medical Devices.
High-End Audio DAC Power Supply
Provides clean 5V rail for audio DACs with 4.17uVrms noise. The FDA903Q's ultra-low noise and high PSRR ensure that the audio signal path is free from power supply induced artifacts. In a typical audio DAC application, the FDA903Q is placed between the system 5V rail and the DAC's AVDD pin, with a 10uF ceramic capacitor on input and output. This configuration minimizes voltage ripple and noise, preserving the dynamic range and signal-to-noise ratio of the DAC. Compared to switching regulators, the LDO eliminates switching noise but dissipates more power; for a 12V-to-5V conversion at 500mA, power dissipation is 3.5W, requiring adequate thermal management.
Recommended
RF Transceiver Power Supply
Powers PLL/VCO circuits with 4.17uVrms noise and 72dB PSRR. The FDA903Q provides a clean, stable voltage to RF components, reducing phase noise and spurious emissions. In an RF transceiver, the FDA903Q is used to supply the VCO and PLL, with careful layout to minimize parasitic inductance. The high PSRR at 1kHz is particularly beneficial for rejecting low-frequency noise from DC-DC converters. The enable pin allows sequenced power-up, preventing latch-up in mixed-signal systems. For a 3.3V rail from a 5V input, the dropout voltage of 200mV ensures regulation even under load transients.
Recommended
Precision ADC/DAC Reference
Buffers reference voltages for 16-bit+ ADCs/DACs. The FDA903Q's low noise and high accuracy make it ideal for reference buffering. In a precision data acquisition system, the FDA903Q is used to generate a clean 5V reference from a noisy 12V rail. The output noise of 4.17uVrms ensures that the reference voltage does not introduce errors in the conversion process. The wide input range allows operation from various supply rails, and the enable pin can be used to power down the reference during standby. The thermal shutdown feature protects the device in case of overload.
Recommended
Industrial Sensor Interface
Provides clean power for sensor signal conditioning. The FDA903Q is used in industrial sensor interfaces to power op-amps and ADCs, ensuring accurate measurements. In a pressure sensor interface, the FDA903Q regulates a 5V rail from a 24V industrial bus, with a 10uF output capacitor for stability. The low dropout voltage allows operation even when the input voltage is close to the output, maximizing efficiency. The wide input range (up to 35V) makes it suitable for harsh industrial environments. The enable pin can be used for power sequencing in multi-channel systems.
Recommended
Test and Measurement Equipment
Supplies low-noise rails for oscilloscopes and signal generators. The FDA903Q's ultra-low noise and high PSRR are critical for maintaining signal integrity in test equipment. In a digital oscilloscope, the FDA903Q powers the analog front-end, ensuring that the noise floor is not degraded. The device's thermal shutdown and current limiting provide protection in case of faults. The enable pin allows remote power control, which is useful in automated test systems. The VQFN-20 package is compact, saving board space in dense designs.
Recommended
Portable Medical Devices
Powers sensitive analog circuits in battery-operated devices. The FDA903Q's low quiescent current (6.4mA) and low dropout voltage extend battery life. In a portable ECG monitor, the FDA903Q regulates a 3.3V rail from a 3.7V Li-ion battery, with a 10uF output capacitor. The low noise ensures that the ECG signal is not corrupted by power supply noise. The enable pin can be used to power down unused sections, saving power. The small VQFN-20 package is ideal for space-constrained designs.
Recommended
Recommended Products Summary
Engineering reference data for FDA903Q β comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | TPS7A4700RGWR | TPS7A4701RGWR-Q1 | TPS7A3301RGWR |
|---|---|---|---|---|
| Package | VQFN-20 (RGW) | VQFN-20 (RGW) - same | VQFN-20 (RGW) - same | VQFN-20 (RGW) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Output Current | 1 A | 1 A | 1 A | 1 A (negative) |
| Output Voltage Range | 1.4V to 34V | 1.4V to 34V | 1.4V to 34V | -36V to -1.4V |
| Enable Pin | Yes (active-high) | No | Yes (active-high) | Yes (active-high) |
| Automotive Grade | No | No | Yes (AEC-Q100) | No |
| Output Noise | 4.17 uVrms | 4.17 uVrms | 4.17 uVrms | 4.17 uVrms |
| PSRR at 1kHz | 72 dB | 72 dB | 72 dB | 72 dB |
Key Differentiators
- Only VQFN-20 family member with enable pin (vs TPS7A4700RGWR)
- Automotive grade option available (vs TPS7A4701RGWR-Q1)
- Positive voltage polarity (vs TPS7A3301RGWR)
Design Notes
At VIN=12V, VOUT=5V, and 1A load, power dissipation is 7W. The VQFN-20 package has theta_JA of 31.4 C/W, resulting in a 220C junction temperature rise. A heatsink or at least 1 square inch of copper pour is required for reliable operation above 2W dissipation.
Place input and output capacitors as close to the IC pins as possible. Use a 10uF ceramic capacitor on the input and a 10uF ceramic capacitor on the output. Add a 0.1uF ceramic capacitor in parallel for high-frequency noise bypass.
Do not exceed the maximum input voltage of 35V. Ensure the external resistor divider uses 1% or better tolerance resistors to maintain output voltage accuracy. The NR/SS capacitor controls startup time and noise bandwidth - do not omit it.
Compliance Information
RoHS compliant per TI product page. Not AEC-Q100 qualified - choose TPS7A4701RGWR-Q1 for automotive.
