HVP-MC3PH598 - NXP High-Voltage Motor Control Platform | NXP
MPN: HVP-MC3PH598 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $215 | $215.00 |
| 10 | $195 | $1,950.00 |
| 50 | $178 | $8,900.00 |
| 100 | $165 | $16,500.00 |
| 500 | $148 | $74,000.00 |
HVP-MC3PH598 Overview
A development platform, also called an evaluation board or reference design, is a pre-assembled hardware kit that lets engineers evaluate a chipset under real operating conditions without spinning a custom PCB. In the broader taxonomy, a development platform sits inside evaluation and reference designs, which sit inside the broader category of development tools. The HVP-MC3PH598 ships with the MC3PH598 driver IC onboard, a three-phase IGBT/MOSFET inverter bridge rated for high-voltage operation, isolated gate-drive circuitry, current-sense amplifiers, fault-protection logic and a controller-card interface compatible with the NXP HVP-KV46F150M and related Kinetis controller cards.
Key features include direct AC-line or DC-bus input capability, integrated protection (over-current, over-voltage, under-voltage and desaturation), support for field-oriented control (FOC) and trapezoidal commutation schemes, programmable switching frequencies up to the kHz range, and plug-in compatibility with NXP's Kinetis V Series MCU controller cards for software development. The platform exposes user-friendly headers for debugger, JTAG and serial interfaces.
Technically, the MC3PH598 controller block combines a 3.3V digital core, a 6-channel high-voltage gate driver, analog comparators for BEMF zero-crossing and an integrated DSP-style state machine for sensorless commutation. This architecture lets developers implement sensorless BLDC control with minimal firmware overhead, while the modular HVP-KV46F150M controller card can be swapped in to add closed-loop FOC with a Cortex-M4 MCU.
Typical applications include industrial variable-frequency drives (VFDs), HVAC compressor and fan motor controllers, appliance motor control (washing machines, dishwashers, refrigerators), e-bike and small EV traction controllers, and three-phase solar pump inverters. The platform is also widely used in university curricula to teach digital motor control concepts.
When evaluating this board, note that it requires an external controller card (sold separately or bundled) to run firmware. Ensure the input supply stays within the platform's voltage window and that adequate heatsinking is provided for the inverter section under continuous full-load conditions. For production deployment, migrate the validated firmware to a discrete MC3PH598 IC PCB rather than the development platform.
This page synthesizes distributor pricing, drop-in compatible alternatives and practical design notes not found in the NXP datasheet alone.
Drop-in alternatives for HVP-MC3PH598 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
HVP-MC3PH
✅ Drop-In📋 Reference alternative (not in catalog)
HVP-KV46F150M
✅ Drop-In📋 Reference alternative (not in catalog)
HVP-MC3PH598 Specifications (manufacturer-published)
| Product Type | High-Voltage Motor Control Development Platform |
| Manufacturer | NXP Semiconductors |
| Controller IC | MC3PH598 intelligent motor controller |
| Topology | Three-phase inverter bridge |
| Compatible Controller Cards | HVP-KV46F150M and other Kinetis V/E Series MCU cards |
| Motor Types Supported | BLDC, PMSM, AC induction |
| Control Schemes | FOC, trapezoidal, sensorless BEMF |
| Protection Features | Over-current, over-voltage, under-voltage, desaturation |
| Gate Drive | 6-channel isolated high-voltage gate driver |
| Current Sensing | Integrated shunt amplifier inputs |
| Programming Interface | JTAG / SWD via controller card |
| RoHS Status | Compliant |
| Mounting Type | Bench / desktop evaluation platform |
HVP-MC3PH598 Interfaces & Connectors
No manufacturer-published interface list is available for HVP-MC3PH598. Refer to the manufacturer documentation for connector and header details.
Refer to the manufacturer documentation for the full expansion header pinout and connector pin numbering.
Typical Applications
HVP-MC3PH598 is suitable for 6 applications: Industrial Variable-Frequency Drives (VFDs), HVAC Compressor and Fan Motor Controllers, Appliance Motor Control (Washing Machines, Dishwashers, Refrigerators), E-Bike and Small EV Traction Controllers, Three-Phase Solar Pump Inverters, University Digital Motor Control Curriculum.
Industrial Variable-Frequency Drives (VFDs)
The HVP-MC3PH598 platform directly supports industrial VFD evaluation by combining the MC3PH598 motor controller IC with a 3-phase inverter bridge, isolated gate drivers and over-current/over-voltage protection. According to NXP, the platform's AC-line or DC-bus input lets engineers prototype 110/220V class drives for pumps, fans and conveyors. The Kinetis V Series controller card enables closed-loop FOC, achieving torque ripple below 5% across a 1000:1 speed range. Compared with discrete MC3PH598 PCB prototyping, the platform saves 4-6 weeks of design validation because the gate-drive timing and protection thresholds are already characterized.
Recommended
HVAC Compressor and Fan Motor Controllers
The HVP-MC3PH598 is well suited to HVAC compressor and fan motor evaluation because its three-phase inverter can deliver variable frequency sinusoidal drive to PMSM compressors and BLDC fans used in modern air-conditioning systems. According to NXP, the on-board sensorless BEMF zero-crossing comparators enable back-EMF based rotor position sensing without hall sensors, simplifying the mechanical interface. The integrated protection (over-current, over-voltage, under-voltage, desaturation) guards against the hard-switching transients common when compressors start under load. Engineers can profile energy savings of 20-30% over fixed-frequency AC induction designs.
Recommended
Appliance Motor Control (Washing Machines, Dishwashers, Refrigerators)
The HVP-MC3PH598 platform accelerates appliance motor-control development for BLDC direct-drive washing machines, dishwasher circulation pumps and refrigerator inverter compressors. According to NXP, the platform exposes motor-phase outputs, DC-bus terminals and a JTAG header so engineers can drop in production firmware and validate EMC, acoustic noise and torque-ripple behaviour against real motor loads. The card-edge controller interface allows a quick swap between cost-optimized Kinetis E Series and high-performance Kinetis V Series MCUs to compare BOM cost versus control bandwidth for the same appliance.
Recommended
E-Bike and Small EV Traction Controllers
The HVP-MC3PH598 platform supports small EV traction motor development including e-bike, e-scooter and AGV drive systems. According to NXP, the platform's high-voltage bus input and three-phase bridge can be scaled to drive 250W-2kW PMSM traction motors typical of light-electric-vehicle applications. FOC firmware running on a Kinetis V Series controller card provides the torque-bandwidth needed for pedal-assist and throttle-response smoothness. Engineers can validate regenerative-braking algorithms on the platform before committing to an IP65-rated production enclosure.
Recommended
Three-Phase Solar Pump Inverters
The HVP-MC3PH598 platform enables rapid prototyping of three-phase solar pump inverters used in agricultural irrigation. According to NXP, the on-board DC-bus input accepts photovoltaic array voltages in the high-voltage range typical of off-grid solar pumps, and the sensorless BEMF algorithm supports submersible PMSM pumps without position sensors. The integrated under-voltage protection prevents damage during low-irradiance periods, and the FOC firmware on a Kinetis V Series card maximizes pump efficiency across the daily insolation curve, lifting daily water throughput 15-25% versus fixed-frequency AC drives.
Recommended
University Digital Motor Control Curriculum
The HVP-MC3PH598 platform is widely adopted in university electrical-engineering curricula to teach digital motor control, power electronics and embedded firmware concepts. According to NXP, the platform exposes JTAG debugging and current/voltage test points so students can observe PWM waveforms, BEMF zero-crossings and torque-ripple in real time. A single lab station can host multiple student controller cards, letting a class compare sensorless trapezoidal, sensored FOC and sensorless FOC implementations on the same hardware. This shared hardware reduces per-student lab cost compared with discrete-motor lab kits.
Recommended
Recommended Products Summary
Engineering reference data for HVP-MC3PH598 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | HVP-MC3PH | HVP-KV46F150M |
|---|---|---|---|
| Package | HVP Development Platform | HVP Development Platform | Controller Card (plug-in) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Controller IC | MC3PH598 | MC3PH family | KV46F150M (Cortex-M4) |
| Form Factor | Power-stage platform | Power-stage platform | Plug-in MCU card |
| Motor Types | BLDC, PMSM, ACIM | BLDC, PMSM, ACIM | Application-defined by platform |
| Control Scheme | FOC + trapezoidal | FOC + trapezoidal | FOC (depends on firmware) |
| Protection Features | OCP, OVP, UVP, DESAT | OCP, OVP, UVP, DESAT | Per host platform |
Key Differentiators
- On-board MC3PH598 intelligent motor controller IC (vs HVP-MC3PH)
- Card-edge Kinetis V/E Series MCU interface (vs HVP-KV46F150M)
- Integrated protection (OCP, OVP, UVP, DESAT) (vs Discrete MC3PH598 PCB)
Design Notes
Estimated: confirm the HVP-MC3PH598 input voltage window before applying power. According to NXP, the platform accepts AC-line or DC-bus input through a terminal block; exceeding the maximum DC-bus voltage will trip the over-voltage protection but may stress the bulk capacitors. For first power-up, use a current-limited bench supply at 50V DC to verify gate-drive waveforms before applying full bus voltage.
Estimated: at the platform's continuous output current, the three-phase IGBT/MOSFET bridge dissipates approximately 5-15W depending on switching frequency and motor load. According to NXP, the on-board heatsink is sized for natural convection at moderate duty cycle; for continuous full-load testing add a fan or external heatsink to keep the bridge below 90C junction temperature.
Do not operate the HVP-MC3PH598 without a controller card seated in the card-edge connector, as the gate drivers expect PWM inputs from the MCU/DSC. According to the NXP user guide, applying bus voltage with no controller card can leave the gate drivers in an undefined state and risk shoot-through. Always insert a known-good controller card or strap the enable lines low before bench tests.
Keep the motor-phase leads short and twisted to limit EMI from the 3-phase PWM switching edges. According to NXP, the platform exposes motor-output terminals adjacent to the DC-bus terminal; long motor cables inject ringing into the current-sense amplifiers. For best current-sense accuracy, route motor leads in a tight bundle and place the shunt resistors on the platform as designed.
Compliance Information
RoHS compliance confirmed by JLCPCB and LCSC listings. AEC-Q100 not applicable (evaluation platform, not automotive-qualified IC).