Maxim Integrated

ICL7650CSA+ - 2MHz Zero-Drift Op Amp | Maxim Integrated

MPN: ICL7650CSA+ ✓ Active
4.5 V to 16 V Vdss 1.5 pA Id 8-pin SOIC Package
MOQ: 1 |

ICL7650CSA+ Overview

The Maxim Integrated ICL7650CSA+ is a chopper-stabilized, zero-drift operational amplifier with a 2 MHz gain-bandwidth product, 2.5 V/µs slew rate, and operation from 4.5 V to 16 V in an 8-pin SOIC package. Its specified input bias current is 1.5 pA, while its open-loop gain reaches 130 dB. These characteristics position it as a precision amplifier for low-level instrumentation where input offset error must remain small without conventional periodic trimming.

A zero-drift operational amplifier is a voltage-feedback amplifier that continuously corrects its input-offset voltage and other low-frequency errors. The ICL7650 family belongs to the chopper-stabilized amplifier class, a subtype of precision operational amplifiers used when low DC offset and high DC gain matter more than wideband noise. The result is a useful combination of very high DC accuracy, low input bias current, and a conventional SOIC-8 implementation.

Key features include 2 MHz gain-bandwidth product, 2.5 V/µs slew rate, 1.5 pA input bias current, and 130 dB open-loop gain. The 4.5 V to 16 V total supply range supports both positive single-supply operation and split supplies up to ±8 V. The chopper-stabilized architecture is particularly useful for current-to-voltage conversion, bridge-sensor conditioning, low-level voltage measurement, and instrumentation-amplifier input stages where offset drift can obscure the wanted signal.

The ICL7650CSA+ is identified as a single-circuit amplifier in the SOIC-8 package. Its 2 MHz bandwidth provides useful response beyond DC, allowing the device to process signals well above the very-low-frequency range in which its zero-drift correction is most important. Input-bias and offset characteristics must still be evaluated together: extremely low bias current does not by itself determine the total measurement error if source resistance, noise, or common-mode limits are unsuitable.

Typical applications include precision current measurement, strain-gauge and bridge sensor interfaces, low-level signal conditioning, laboratory instrumentation, and high-impedance sensor amplifiers. In a transimpedance stage, the 1.5 pA input bias current can limit the voltage error created across a high-value feedback resistor. In bridge measurements, the 130 dB open-loop gain supports accurate closed-loop gain, provided the output remains within its voltage range and the common-mode input stays within the amplifier's permitted range.

The primary design consideration is power-supply headroom. A 2.5 V/µs slew rate and 2 MHz bandwidth can produce a large output transition faster than the load can settle, so feedback compensation and output isolation should be checked with the intended load. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should be routed away from switching nodes and high-current return paths.

This page combines the ICL7650CSA+ specifications, practical zero-drift amplifier design guidance, application-focused circuit roles, and parameter comparisons with same-package alternatives. These engineering details help engineers select the amplifier and plan the surrounding sensor, feedback, filtering, and layout requirements with fewer board-level iterations.

Drop-in alternatives for ICL7650CSA+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ICL7650CSA+ (same form factor and footprint) — differing in Amplifier Type, Input Bias Current, Supply Voltage Range.

Maxim Integrated
Amplifier Type: Single chopper-stabilized operational amplifier
Input Bias Current: 4 pA typical
Supply Voltage Range: Single ±8 V maximum
Compare with ICL7650CSA+ →

ICL7650CSA

✅ Drop-In
📦 8-pin SOIC
Ordering suffix differs; stated 2 MHz bandwidth, 2.5 V/µs slew rate, and SOIC-8 format are otherwise the same

📋 Reference alternative (not in catalog)

ICL7650CSA-T

✅ Drop-In
📦 8-pin SOIC
Temperature-grade ordering option differs from ICL7650CSA+; 2 MHz bandwidth and 2.5 V/µs slew rate remain applicable

📋 Reference alternative (not in catalog)

ICL7650CSA+T

✅ Drop-In
📦 8-pin SOIC
Tape-and-reel ordering suffix differs while the zero-drift amplifier and 8-SOIC electrical format remain unchanged

📋 Reference alternative (not in catalog)

ICL7653CSA

✅ Drop-In ⚠️ Specs Unverified
Maxim Integrated
📦 8-pin SOIC
Single chopper-stabilized operational amplifier · 10 uV typical · 4 pA typical · Single ±8 V maximum · Yes · 1 channel · 8-pin SOIC · 3.90 mm

Contact for price

View Datasheet →

ICL7650SCBA-1

✅ Drop-In
📦 8-pin SOIC
Older ICL7650 family ordering and grade designation differs; confirm package marking, temperature range, and offset specifications before substitution

📋 Reference alternative (not in catalog)

ICL7650CSA+ Maximum Ratings & Electrical Characteristics

Amplifier Type Chopper-Stabilized Zero-Drift Operational Amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 2 MHz
Slew Rate 2.5 V/µs
Input Bias Current 1.5 pA
Open-Loop Gain 130 dB
Supply Voltage Range 4.5 V to 16 V
Single-Supply Operating Range Up to 16 V
Split-Supply Operating Range ±2.25 V to ±8 V
Package 8-pin SOIC
Package Width 3.90 mm
Mounting Type Surface Mount

ICL7650CSA+ 3.90 mm Pin Configuration Guide

Pin configuration for ICL7650CSA+ (3.90 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

3.90 mm package pinout diagram for ICL7650CSA+

No detailed pinout data available for ICL7650CSA+.

Refer to the datasheet for full pin configuration.

Typical Applications

ICL7650CSA+ is suitable for 6 applications: Precision Current-to-Voltage Conversion, Bridge Sensor Signal Conditioning, High-Impedance Sensor Amplification, Laboratory Instrumentation, Low-Level Voltage Measurement, Audio and Instrumentation Signal Paths.

⚡

Precision Current-to-Voltage Conversion

The ICL7650CSA+ fits a transimpedance stage that converts a small sensor current into a measurable voltage. Its specified input bias current of 1.5 pA is especially useful with high-value feedback resistors, where bias-current error would otherwise create a significant output offset. The 130 dB open-loop gain supports accurate closed-loop operation, while the 2 MHz gain-bandwidth product handles signals beyond DC. The circuit still requires careful feedback-layout control and a compatible transimpedance-capacitor strategy to maintain stability.

🏭

Bridge Sensor Signal Conditioning

The ICL7650CSA+ can serve as the input amplifier for resistive bridge sensors where small differential signals must be amplified without substantial low-frequency offset movement. Its chopper-stabilized architecture targets low DC offset drift, and the 1.5 pA input bias current reduces excitation of high-impedance sensor nodes. The 4.5 V to 16 V supply range supports compact industrial instrumentation, although the input common-mode range, excitation voltage, and output swing must be checked against the chosen bridge and ADC.

🧩

High-Impedance Sensor Amplification

The ICL7650CSA+ is appropriate for buffering high-impedance sensors where leakage from the input stage could corrupt the measured signal. Its 1.5 pA input bias current limits the current drawn from the sensor node, and the high open-loop gain of 130 dB supports accurate low-frequency amplification. Designers should still calculate the bias-induced error against source impedance, guard sensitive nodes, and verify that the selected gain is stable with the sensor capacitance and wiring length.

🔧

Laboratory Instrumentation

The ICL7650CSA+ supports laboratory measurement circuits that need low DC offset but do not require high-speed general-purpose performance. Its 2 MHz gain-bandwidth product and 2.5 V/µs slew rate provide adequate bandwidth for many low-frequency and moderate-frequency signals, while chopper stabilization improves DC behavior. It is useful in buffered instrument inputs, programmable-gain stages, and reference-adjacent circuits, provided the designer accounts for chopped-amplifier noise around the correction frequency and avoids driving a capacitive load directly.

📺

Low-Level Voltage Measurement

The ICL7650CSA+ is useful when a low-level voltage must be amplified without accepting large low-frequency offset errors. The 130 dB open-loop gain supports accurate inverting and noninverting gain stages, while the low input bias current minimizes loading of the measured source. A practical implementation should use short, guarded input traces, local supply decoupling, and an output range that remains inside the device's operating limits. The 4.5 V minimum supply gives flexibility for low-voltage measurement systems.

🎧

Audio and Instrumentation Signal Paths

The ICL7650CSA+ can handle low-level audio or instrumentation signals where low DC offset helps preserve small-signal fidelity. Its 2.5 V/µs slew rate and 2 MHz bandwidth allow it to process signals beyond the DC region, while the 1.5 pA input bias current suits high-impedance sources. For audio paths, compare the amplifier's chopper-related noise spectrum with the system noise floor and avoid excessive gain that amplifies both the wanted signal and correction-region artifacts.

What are the key specifications of ICL7650CSA+ that engineers should know?
The ICL7650CSA+ is a single-circuit, chopper-stabilized operational amplifier with a 2 MHz gain-bandwidth product, 2.5 V/µs slew rate, 1.5 pA input bias current, and 130 dB open-loop gain. According to the Maxim Integrated datasheet, it operates from 4.5 V to 16 V and is offered in an 8-pin SOIC package. Its principal advantage is low DC offset drift, making it appropriate for precision low-level signal conditioning rather than high-speed general-purpose amplification.
What is the operating voltage of ICL7650CSA+?
The ICL7650CSA+ operates from 4.5 V to 16 V across its total supply terminals. This range supports 5 V, 12 V, and 15 V single-supply systems as well as split supplies from ±2.25 V through ±8 V. According to the Maxim Integrated datasheet, the device is specified at ±8 V, and designers should verify the signal and output ranges of the specific operating point before finalizing a bias configuration.
What is the ICL7650CSA+ pinout?
The ICL7650CSA+ uses an 8-pin SOIC package, with pin 1 at the top-left when the package orientation mark is viewed conventionally. The manufacturer datasheet contains the authoritative pin-description table and package drawing. Use that table when assigning the inverting input, non-inverting input, supply terminals, output, and any no-connect positions, because no-connect assignments are electrically significant during PCB design.
Where can I download the ICL7650CSA+ datasheet PDF?
The ICL7650CSA+ datasheet is available through the Maxim Integrated document archive linked from the component listing and through the manufacturer's product documentation. The datasheet describes the chopper-stabilized architecture, supply limits, electrical characteristics, pin assignments, and application information. Use the manufacturer version for design sign-off and the linked distributor copy only as a convenient reference copy.
What is the best drop-in replacement for ICL7650CSA+?
The closest same-package replacements are the Maxim Integrated ICL7650CSA and ICL7650CSA-T, subject to confirming temperature grade and ordering suffix requirements. Both retain the chopper-stabilized amplifier identity and SOIC-8 format. The ICL7653CSA is another same-family option, but its additional control function must be tied to the correct state rather than treated as automatically interchangeable.
What can replace ICL7650CSA+?
A practical replacement must match the SOIC-8 pinout, 4.5 V to 16 V supply capability, low-offset architecture, and required input bias current. The Maxim Integrated ICL7650CSA, ICL7650CSA-T, and ICL7653CSA are the closest same-family options. Confirm the complete pin description, common-mode range, output swing, temperature grade, and any shutdown-control behavior before approving a replacement for production.
Is ICL7650CSA+ the same as ICL7650CSA?
The ICL7650CSA+ and ICL7650CSA identify closely related Maxim Integrated versions of the same chopper-stabilized amplifier family, with the '+' denoting the manufacturer's associated ordering designation. Their electrical comparison must still include the exact suffix, temperature grade, and package marking. Use the ordering table in the Maxim Integrated datasheet to confirm that the selected variant satisfies the production requirements.
ICL7650CSA+ vs ICL7653CSA - which is better for low-level instrumentation?
The ICL7650CSA+ is preferable when the design needs only the basic zero-drift amplifier function, while the ICL7653CSA adds a shutdown-related control feature in the same family. Both use the chopper-stabilized approach for low DC offset, but the extra control function can simplify power management when it is required. If the shutdown pin is unused, its required state and any timing implications must be verified before treating the ICL7653CSA as interchangeable.
When should I choose ICL7650CSA+ over a general-purpose operational amplifier?
Choose the ICL7650CSA+ when input-offset stability is the dominant concern and the signal bandwidth can remain below its 2 MHz gain-bandwidth product. Its chopper-stabilized architecture targets low DC offset drift, and the specified 1.5 pA input bias current is suitable for high-impedance sources. A general-purpose amplifier may be preferable when low-noise wideband performance, output swing, or rail-to-rail operation is more important than offset stability.
Is ICL7650CSA+ suitable for high-impedance sensor measurement?
The ICL7650CSA+ is suitable for many high-impedance sensor measurements because its specified input bias current is 1.5 pA. In a transimpedance amplifier, that current creates an offset across the feedback resistor, so source resistance and sensor leakage remain important design constraints. According to the Maxim Integrated datasheet, the device also offers 130 dB open-loop gain, supporting precise closed-loop measurements.
How should ICL7650CSA+ power-supply decoupling be designed?
Place the supply-decoupling capacitors immediately beside the ICL7650CSA+ power pins, with the shortest possible ground return path. Use the capacitor values and stability recommendations in the Maxim Integrated datasheet rather than substituting generic bulk capacitance. The 4.5 V to 16 V operating range does not guarantee clean regulation near a switching supply, so power-supply noise and layout-induced ripple should be checked with an oscilloscope.
Where can I buy ICL7650CSA+ and what is its lead time?
Use the Request a Quote form on this page to request the ICL7650CSA+ price, current stock position, authorized sourcing options, and lead time for the exact 8-pin SOIC ordering variant. Lead time can vary with quantity, packaging, and market conditions, so confirm the requested quantity and suffix when submitting the request. The same form can be used for scheduled production buys and prototype quantities.
What is the price of ICL7650CSA+?
The current unit price and volume pricing for ICL7650CSA+ are handled through the Request a Quote form on this page. Quote requests should state the required quantity, 8-pin SOIC package, and any required temperature grade or marking. This approach keeps the commercial quote tied to current availability rather than presenting a potentially stale historical price as a current transaction price.
Is ICL7650CSA+ in stock?
Current ICL7650CSA+ inventory should be confirmed through the Request a Quote form on this page because stock can change by package, quantity, and authorized supply channel. The part is listed as a single-circuit 8-SOIC chopper-stabilized amplifier by major component distributors. Include your required quantity and target delivery date in the request so the fulfillment team can match the correct suffix and supply plan.
What is the best Maxim Integrated equivalent for ICL7650CSA+?
The closest Maxim Integrated equivalents are ICL7650CSA and ICL7650CSA-T because they preserve the chopper-stabilized amplifier family and SOIC-8 format. The ICL7653CSA provides a nearby option when a shutdown-control function is useful. According to the Maxim Integrated family documentation, these variants share the zero-drift operating concept, but pin functions, temperature grades, and supply conditions should be compared before selecting a production substitute.
Does ICL7650CSA+ comply with RoHS and REACH?
The exact RoHS and REACH status must be confirmed for the selected ICL7650CSA+ ordering suffix and current manufacturer documentation. Use the Request a Quote form for lot-specific environmental and material compliance documents when required by an industrial or automotive quality system. Do not infer compliance solely from the chip designation, because packaging and date-of-introduction markings can affect procurement records.

Engineering reference data for ICL7650CSA+ — comparison, design guidance, and compliance information.

Selection Guide

Choose the ICL7650CSA+ for low-level instrumentation requiring low DC offset drift, very low input bias current, and an 8-pin SOIC footprint. Its 2 MHz bandwidth, 2.5 V/µs slew rate, and 130 dB open-loop gain make it suitable for bridge sensors, precision current-to-voltage conversion, and buffered low-level measurements. Select ICL7650CSA when the base commercial ordering designation is preferred, or ICL7650CSA-T when the required temperature grade must be confirmed. ICL7650CSA+T is useful for production tape-and-reel assembly. Consider ICL7653CSA when the family’s shutdown-control function adds value, but verify the control-pin state and timing before substitution. ICL7650SCBA-1 is an older family designation whose exact package marking, temperature range, and electrical limits must be checked. For any substitution, review offset voltage, drift, noise, common-mode range, output swing, compensation, and stability—not just the SOIC-8 footprint.

Comparison with Alternatives

Parameter This Product ICL7650CSA ICL7650CSA-T ICL7650CSA+T ICL7653CSA ICL7650SCBA-1
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Amplifier Architecture Chopper-stabilized zero-drift Chopper-stabilized zero-drift Chopper-stabilized zero-drift Chopper-stabilized zero-drift Chopper-stabilized zero-drift with shutdown control Chopper-stabilized zero-drift
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Ordering and Temperature Options ICL7650CSA+ commercial ordering designation Base commercial designation Temperature-grade designation Tape-and-reel designation Shutdown-control family designation Older family designation

Key Differentiators

  • Low input bias current supports high-impedance measurement (vs ICL7650CSA)
  • Direct SOIC-8 family interchangeability (vs ICL7650CSA-T)
  • Higher DC gain than a typical general-purpose precision amplifier (vs ICL7653CSA)

Design Notes

Do not treat a chopper-stabilized amplifier as a direct substitute for every general-purpose op amp. Its zero-drift correction changes the noise spectrum and can introduce artifacts near the chopper frequency. Before choosing the ICL7650CSA+ for audio, communications, or wideband instrumentation, compare those artifacts with the system noise floor. Also verify the common-mode input range, output swing, and stability because the 4.5 V to 16 V supply specification alone does not guarantee useful signal headroom.

Place input and output compensation components close to their associated pins, and route sensitive input traces away from power-converter nodes and high-current return paths. For a transimpedance application, keep the feedback resistor and compensation capacitor compact to minimize parasitic capacitance and feedback-loop delay. The ICL7650CSA+ offers a 2 MHz gain-bandwidth product and 2.5 V/µs slew rate, so high closed-loop gain combined with stray capacitance can produce ringing even when the DC operating point is correct.

Design the power rail around the 4.5 V minimum supply requirement and preserve headroom for the output swing. Decouple the supply pins locally and verify ripple at the amplifier pins, particularly when an upstream switching converter is used. A 2.5 V/µs slew rate can produce rapid output transitions, so the regulator and decoupling network should have sufficient response for the selected load and loop bandwidth. Follow the capacitor values and stability guidance in the Maxim Integrated datasheet.

For high-impedance sensors, minimize leakage from PCB contamination, humidity, connectors, and adjacent digital traces. The 1.5 pA input bias current is small, but its effect scales with source impedance, and it should not be interpreted as the amplifier's complete input-referred error. Guard or shield the sensitive node where practical, use clean boards, and evaluate offset drift and noise over the temperature range required by the final system.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Exact environmental-compliance status for the selected ordering suffix and manufacturing lot must be confirmed through the Request a Quote form.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

ICL7650CSA+ datasheet ICL7650CSA+ pinout ICL7650CSA+ datasheet pdf ICL7650CSA+ specifications ICL7650CSA+ equivalent ICL7650CSA+ replacement ICL7650CSA+ price ICL7650CSA+ stock ICL7650CSA+ vs ICL7653CSA Maxim Integrated ICL7650CSA+ ICL7650CSA+ SOIC-8 footprint ICL7650CSA+ application circuit ICL7650 2MHz zero drift amplifier ICL7650CSA+ high impedance sensor

Related Components & Terms

Maxim Integrated ICL7650CSA+ ICL7650CSA ICL7650CSA-T ICL7650CSA+T ICL7653CSA ICL7650SCBA-1 zero-drift operational amplifier chopper-stabilized amplifier precision operational amplifier voltage-feedback amplifier input offset voltage input bias current open-loop gain gain-bandwidth product slew rate transimpedance amplifier bridge sensor signal conditioning SOIC-8 QFN family surface mount package instrumentation amplifier precision measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details