Analog Devices

ICL7650CSD+ - 2MHz Chopper Op Amp | Maxim Integrated

MPN: ICL7650CSD+ ✓ Active
14-SOIC, 3.90 mm width Package
MOQ: 1 |

ICL7650CSD+ Overview

The Maxim Integrated ICL7650CSD+ is a single-circuit, zero-drift chopper-stabilized operational amplifier with a 2 MHz gain-bandwidth product, supplied in a 14-pin SOIC package measuring 3.90 mm wide. It is intended for low-level signal-processing applications where low input offset voltage, low input bias current, and stable low-frequency performance are important. The device belongs to the operational-amplifier hierarchy and is intended for precision analog signal conditioning.

A chopper-stabilized operational amplifier is an amplifier that uses continuous switching and demodulation techniques to reduce offset voltage and improve low-frequency drift. This approach differs from a conventional feedback amplifier, whose input-referred errors can remain significant after calibration. The ICL7650/ICL7653 family combines a wide bandwidth with low-offset and low-bias-current characteristics, making it useful for sensor interfaces, current measurements, and other low-level analog stages.

The ICL7650CSD+ provides one amplifier circuit, a 2 MHz gain-bandwidth product, and a 14-SOIC package. Its chopper-stabilized architecture is particularly useful when signal bandwidth is modest but input-referred offset must be minimized. The wide bandwidth can also support higher closed-loop gains and applications requiring signal amplification beyond the very-low-frequency region in which offset dominates. Exact offset, bias-current, supply-voltage, noise, and temperature-range limits must be confirmed in the manufacturer data sheet before production release.

The zero-drift architecture trades continuous internal switching for very low offset behavior. Designers should therefore account for the device's internally generated modulation spectrum and place appropriate filtering around sensitive measurements. Input and output filtering, guard techniques, and careful grounding can reduce coupling from the chopper carrier. The 14-pin SOIC package is suitable for conventional surface-mount assembly and through-hole board-layout compatibility.

Typical applications include low-level sensor signal conditioning, bridge-amplifier interfaces, precision current detection, and instrumentation where small voltage errors would otherwise dominate the measurement. It can also serve as a front-end amplifier for high-resolution analog-to-digital converter inputs when the signal bandwidth is within the amplifier's useful range. The single amplifier per package supports compact analog channels requiring independent instrumentation or filtering.

The primary design consideration is deciding whether chopper stabilization is preferable to a conventional precision amplifier. Use the ICL7650CSD+ when low-frequency offset performance is more important than avoiding modulation-related artifacts. For applications requiring wide signal bandwidth, low-noise frequency-domain performance, or no chopping spectrum, evaluate the complete system bandwidth and filtering requirements before finalizing the amplifier selection.

Drop-in alternatives for ICL7650CSD+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ICL7650CSD

✅ Drop-In
📦 14-SOIC (3.90 mm width)
Same 14-SOIC package and documented functional, terminal, and package consistency; exact temperature-grade limits require confirmation.

📋 Reference alternative (not in catalog)

ICL7650CSD-T

✅ Drop-In
📦 14-SOIC (3.90 mm width)
Same 14-SOIC chopper-amplifier package; ordering suffix differs, with exact electrical and temperature-grade differences requiring data-sheet confirmation.

📋 Reference alternative (not in catalog)

ICL7650CSD+T

✅ Drop-In
📦 14-SOIC (3.90 mm width)
Same 14-SOIC electrical device and 2 MHz chopper-amplifier configuration; the ordering code denotes the tape-and-reel packing form.

📋 Reference alternative (not in catalog)

ICL7650CSD+ Maximum Ratings & Electrical Characteristics

Product Type Zero-drift chopper-stabilized operational amplifier
Amplifier Circuit Count 1 circuit
Gain-Bandwidth Product 2 MHz
Package 14-SOIC, 3.90 mm width
Mounting Type Surface mount

ICL7650CSD+ 14-soic, 3.90 mm width Pin Configuration Guide

Pin configuration for ICL7650CSD+ (14-soic, 3.90 mm width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-soic, 3.90 mm width package pinout diagram for ICL7650CSD+

No detailed pinout data available for ICL7650CSD+.

Refer to the datasheet for full pin configuration.

Typical Applications

ICL7650CSD+ is suitable for 6 applications: Precision Sensor Signal Conditioning, Bridge and Strain-Gauge Measurement, Low-Level Current Detection, High-Resolution ADC Front End, Medical and Laboratory Instrumentation, Precision Test and Measurement.

🧩

Precision Sensor Signal Conditioning

The ICL7650CSD+ fits low-level sensor front ends where input offset can obscure the useful signal. Its chopper-stabilized architecture is intended to provide low input offset voltage and low input bias current, while the 2 MHz gain-bandwidth product allows closed-loop operation beyond pure DC. Place the amplifier close to the sensor or bridge connection, keep high-impedance input traces short, and add an anti-alias filter at the bandwidth required by the measurement system.

🏭

Bridge and Strain-Gauge Measurement

The ICL7650CSD+ can amplify the small differential voltage produced by resistive bridges and strain gauges, where offset drift may be comparable to the sensed quantity. The zero-drift topology is preferable when minimizing slowly varying input-referred error is more important than conventional broadband noise behavior. For a practical bridge circuit, use a stable excitation source, guard high-impedance inputs, and select a closed-loop gain and filter bandwidth appropriate to the 2 MHz gain-bandwidth product.

⚡

Low-Level Current Detection

The ICL7650CSD+ is suitable for amplifying small shunt or current-sense voltages while minimizing static offset contribution. Its 2 MHz gain-bandwidth product supports more than DC-only signal paths, but the useful closed-loop bandwidth remains governed by gain, stability, output swing, and the filtering requirement. Keep the shunt return and amplifier ground on the same low-impedance path, and verify that input common-mode voltage and output swing remain within the manufacturer limits.

🖥️

High-Resolution ADC Front End

The ICL7650CSD+ can serve as the analog gain stage preceding a high-resolution analog-to-digital converter when the converter input is small and precision matters. Low input offset voltage and low input bias current help preserve the code range represented by the sensor signal. Select a closed-loop gain that preserves stability, check the amplifier output range against the converter's input range, and use an RC anti-alias filter to remove both out-of-band noise and chopper-related artifacts.

💊

Medical and Laboratory Instrumentation

The ICL7650CSD+ fits laboratory and medical instrumentation channels that amplify low-level physiological or analytical signals. The chopper-stabilized architecture addresses offset-related error, while the single-amplifier 14-SOIC package supports compact multi-channel analog boards. Each channel should be evaluated for leakage, isolation, filtering, and noise separation; the amplifier's modulation spectrum must not be allowed to reach sensitive downstream measurement stages.

🔧

Precision Test and Measurement

The ICL7650CSD+ can be used in bench and automated measurement systems to amplify small outputs from sensors, dividers, or laboratory sources. Its 2 MHz gain-bandwidth product permits useful closed-loop bandwidth beyond DC, enabling moderate-bandwidth signal capture when combined with proper filtering. Use a low-noise reference supply, short feedback components, and a defined anti-alias network, then characterize gain, output noise, and residual modulation across the required frequency range.

Recommended Products Summary

ICL7650CSD+ Analog Devices Used in: Precision Sensor Signal Conditioning, Bridge and Strain-Gauge Measurement, Low-Level Current Detection, High-Resolution ADC Front End, Medical and Laboratory Instrumentation, Precision Test and Measurement ICL7650CSD Same-family precision amplifier Used in: Precision Sensor Signal Conditioning, Low-Level Current Detection ICL7650CSD-T Same-family 14-SOIC chopper amplifier Used in: Bridge and Strain-Gauge Measurement, Medical and Laboratory Instrumentation ADS1262IPW Texas Instruments Used in: High-Resolution ADC Front End ICL7650CSD+T Same-family 14-SOIC amplifier Used in: Precision Test and Measurement
What is the ICL7650CSD+?
The ICL7650CSD+ is a single-circuit, zero-drift chopper-stabilized operational amplifier from Maxim Integrated, with a 2 MHz gain-bandwidth product in a 14-pin SOIC package. According to the Maxim ICL7650/ICL7653 family description, the amplifier is intended for low-level signal processing because it combines low input offset voltage, low input bias current, and wide bandwidth. It is suitable for precision instrumentation, sensor interfaces, and current-measurement circuits when the system can accommodate the internal chopper spectrum.
What are the key specifications of ICL7650CSD+ that engineers should know?
The key documented specifications are one amplifier circuit, a 2 MHz gain-bandwidth product, zero-drift chopper stabilization, and a 14-SOIC package measuring 3.90 mm in width. The family description identifies low input offset voltage, low input bias current, and wide bandwidth as the principal benefits. The 14-SOIC format supports established surface-mount assembly methods, while the chopper architecture makes the device most appropriate for low-bandwidth precision applications where input-referred offset dominates.
Where can I download the ICL7650CSD+ datasheet PDF?
The ICL7650CSD+ datasheet PDF is available through the Maxim family document linked on this page, and an archived copy is also indexed in the datasheet archive. The manufacturer document should be used as the controlling source for the complete electrical tables, timing information, pin descriptions, and application circuits. The archived listing covers the same ICL7650 family and is useful when locating an older copy, but engineers should verify revision status against the manufacturer document before releasing a design.
Where can I find the ICL7650CSD+ pinout?
The ICL7650CSD+ pinout is defined in the pin-description table of the Maxim ICL7650/ICL7653 family data sheet. The component uses a 14-pin SOIC package, but individual pin names are not reproduced on this page because the accessible product descriptions do not expose the complete terminal table. Use the family data sheet before assigning PCB tracks, especially for supply connections, offset null terminals, and any package-specific exposed connections.
Is ICL7650CSD+ suitable for low-level sensor signal conditioning?
The ICL7650CSD+ is suitable for low-level sensor signal conditioning because it is a chopper-stabilized amplifier with low input offset voltage, low input bias current, and a 2 MHz gain-bandwidth product. The device can amplify small sensor outputs before conversion or measurement, reducing the influence of static input-referred error. In practice, use the complete data-sheet limits for noise, common-mode range, supply voltage, and temperature, and add filtering where the internal modulation spectrum could affect the result.
What is the difference between a zero-drift amplifier and a conventional operational amplifier?
A zero-drift amplifier reduces input-referred offset and its temperature drift by using continuous chopping and demodulation, while a conventional amplifier relies mainly on feedback and resistor matching. The ICL7650CSD+ uses this zero-drift approach and also offers a 2 MHz gain-bandwidth product. The main design trade-off is that continuous modulation can create artifacts outside the intended signal bandwidth, so low-pass filtering and careful layout remain important.
ICL7650CSD+ vs ICL7650CSD - which is better for a new design?
Choose the ICL7650CSD+ when the required orderable grade, temperature range, and assembly qualification match a new design. The ICL7650CSD remains a closely related 14-SOIC member of the same family, and a cross-reference comparison reports consistent terminals and package characteristics. The exact distinction between their temperature grades or orderable suffixes must be confirmed in the manufacturer data sheet; the plus-marked version should not be selected solely from the suffix.
When should I choose ICL7650CSD+ over another chopper-stabilized amplifier?
Choose the ICL7650CSD+ when you need one chopper-stabilized amplifier in a 14-SOIC footprint, a 2 MHz gain-bandwidth product, and the documented low-offset characteristics of the ICL7650 family. Compare another candidate only after checking supply voltage, input bias current, output swing, noise, temperature range, and chopping-related output artifacts. The present part is strongest when low-frequency offset performance is more valuable than a conventional amplifier's cleaner broadband noise behavior.
What can replace ICL7650CSD+?
The closest documented replacement is the non-plus-marked ICL7650CSD, which a published comparison describes as completely replaceable because its functional characteristics, terminals, and package are consistent. ICL7650CSD-T is another 14-SOIC orderable variant, while ICL7650CSD+T is primarily a tape-and-reel ordering code for the same device. Verify temperature grade, qualification, supply limits, and lifecycle requirements before approving any substitution in production.
Is there a confirmed cross-brand drop-in replacement for ICL7650CSD+?
No confirmed cross-brand drop-in replacement for the ICL7650CSD+ is established by the available component cross-reference results. A valid substitute must match the 14-SOIC footprint, pin functions, supply range, offset and bias behavior, bandwidth, output swing, and temperature grade. Closest-match search tools can generate candidates, but their output is not itself proof of drop-in compatibility; each candidate must be checked against the manufacturer data sheet and application requirements.
Is ICL7650CSD+ in stock and what is its lead time?
Stock and lead time should be requested through the Request a Quote form on this page because availability changes by order quantity and assembly configuration. The product listing identifies the ICL7650CSD+ as a 14-SOIC chopper amplifier and reports inventory at the time of listing, but that snapshot should not be treated as a current allocation guarantee. The quote form is the appropriate channel for confirming exact suffix, quantity, delivery date, and traceability requirements.
How much does ICL7650CSD+ cost?
The current commercial price for the ICL7650CSD+ should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, package form, delivery schedule, and traceability requirements, so a stale single-unit figure is not an appropriate purchasing commitment. Submit the desired quantity, shipment destination, and target date with the quote request to receive a current quotation for the exact ordering code.
Where can I buy ICL7650CSD+ online?
Use the Request a Quote form on this page to source the exact ICL7650CSD+ ordering code and confirm current availability. The form allows the required quantity, delivery destination, and packaging or traceability needs to be evaluated together. For production procurement, specify the complete manufacturer part number ICL7650CSD+ and request lot traceability and date-code information in addition to the commercial quotation.
How should I filter the chopper noise from ICL7650CSD+?
Filter the chopper-related modulation by defining the maximum signal bandwidth and placing a suitable low-pass filter after the amplifier or within its feedback network. Component values should be calculated from the required attenuation and phase margin rather than copied without checking the closed-loop gain. Keep the filter components close to the amplifier pins, maintain a clean return path, and verify the resulting response with time-domain and spectrum measurements.
Does ICL7650CSD+ meet RoHS and REACH requirements?
The RoHS, REACH, lead-free, halogen-free, and conflict-minerals status must be confirmed from the current manufacturer product or declaration documentation for the exact ordering code. Those compliance statements are not established by the distributor product descriptions and therefore remain unverified on this page. For an industrial or automotive production release, request the applicable material declaration and qualification records from the manufacturer before approving the component.

Engineering reference data for ICL7650CSD+ — comparison, design guidance, and compliance information.

Selection Guide

Choose the ICL7650CSD+ for a new low-level precision analog stage that needs one chopper-stabilized amplifier, a 2 MHz gain-bandwidth product, and a 14-SOIC footprint. The ICL7650CSD is the closest documented same-family alternative and is described as functionally and pin compatible, but confirm the exact temperature and ordering-grade requirements before selecting it. ICL7650CSD-T is useful when its ordering suffix matches the required temperature grade or qualification, while ICL7650CSD+T is primarily the tape-and-reel form of the same 14-SOIC device. No cross-brand drop-in part has been confirmed. Do not choose solely from the amplifier category: verify supply range, input common-mode limits, output swing, input bias current, offset limits, and temperature range in the manufacturer data sheet. Also confirm that filtering can remove the chopper-related modulation without degrading the required signal bandwidth.

Comparison with Alternatives

Parameter This Product ICL7650CSD ICL7650CSD-T ICL7650CSD+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-SOIC (3.90 mm width) 14-SOIC (3.90 mm width) 14-SOIC (3.90 mm width) 14-SOIC (3.90 mm width)
Stabilization Type Zero-drift chopper-stabilized Zero-drift chopper-stabilized Zero-drift chopper-stabilized Zero-drift chopper-stabilized
Ordering Form ICL7650CSD+ ICL7650CSD ICL7650CSD-T ICL7650CSD+T

Key Differentiators

  • Single-circuit precision amplifier in an established 14-SOIC footprint (vs ICL7650CSD)
  • Documented 2 MHz gain-bandwidth product (vs ICL7650CSD)
  • Low-offset architecture for precision signal paths (vs ICL7650CSD-T)

Design Notes

Chopper-stabilized amplifiers produce internally modulated signals that may appear around the switching carrier. Establish the highest required signal frequency before selecting the closed-loop gain, then design a low-pass network with adequate phase margin. Place the filter close to the amplifier or ADC input and validate the complete cascade with both time-domain and spectrum measurements.

Keep the feedback loop physically small and connect the input and return paths using quiet, low-impedance traces. High-impedance sensor inputs should be short and guarded because their leakage and capacitance can create errors that are much larger than the amplifier's offset. Place input and output decoupling capacitors near their associated pins, following the manufacturer layout guidance in the family data sheet.

Do not select the ICL7650CSD+, ICL7650CSD, ICL7650CSD-T, or ICL7650CSD+T solely by package and description. Confirm the ordering suffix, temperature range, electrical limits, and qualification requirements for the specific production environment. In particular, the tape-and-reel ordering code changes assembly packaging rather than constituting a different circuit design.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status for the exact ICL7650CSD+ ordering code must be confirmed from the current manufacturer product documentation and material declarations.

Related Searches

ICL7650CSD+ datasheet ICL7650CSD+ pinout ICL7650CSD+ datasheet pdf ICL7650CSD+ specifications ICL7650CSD+ 14-SOIC ICL7650CSD+ zero drift amplifier ICL7650CSD+ equivalent ICL7650CSD+ replacement ICL7650CSD+ vs ICL7650CSD ICL7650CSD+ price ICL7650CSD+ stock Maxim Integrated ICL7650CSD+

Related Components & Terms

Analog Devices Maxim Integrated ICL7650CSD+ ICL7650CSD ICL7650CSD-T ICL7650CSD+T operational amplifier precision amplifier zero-drift amplifier chopper-stabilized amplifier chopper modulation input offset voltage input bias current gain-bandwidth product low-level signal processing sensor signal conditioning precision current detection bridge measurement ADC front end 14-SOIC SOIC package family surface mount anti-alias filter analog-to-digital converter
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details