ICL7650CSD+ - 2MHz Chopper Op Amp | Maxim Integrated
部品番号: ICL7650CSD+ ✓ 生産中ICL7650CSD+ 概要
A chopper-stabilized operational amplifier is an amplifier that uses continuous switching and demodulation techniques to reduce offset voltage and improve low-frequency drift. This approach differs from a conventional feedback amplifier, whose input-referred errors can remain significant after calibration. The ICL7650/ICL7653 family combines a wide bandwidth with low-offset and low-bias-current characteristics, making it useful for sensor interfaces, current measurements, and other low-level analog stages.
The ICL7650CSD+ provides one amplifier circuit, a 2 MHz gain-bandwidth product, and a 14-SOIC package. Its chopper-stabilized architecture is particularly useful when signal bandwidth is modest but input-referred offset must be minimized. The wide bandwidth can also support higher closed-loop gains and applications requiring signal amplification beyond the very-low-frequency region in which offset dominates. Exact offset, bias-current, supply-voltage, noise, and temperature-range limits must be confirmed in the manufacturer data sheet before production release.
The zero-drift architecture trades continuous internal switching for very low offset behavior. Designers should therefore account for the device's internally generated modulation spectrum and place appropriate filtering around sensitive measurements. Input and output filtering, guard techniques, and careful grounding can reduce coupling from the chopper carrier. The 14-pin SOIC package is suitable for conventional surface-mount assembly and through-hole board-layout compatibility.
Typical applications include low-level sensor signal conditioning, bridge-amplifier interfaces, precision current detection, and instrumentation where small voltage errors would otherwise dominate the measurement. It can also serve as a front-end amplifier for high-resolution analog-to-digital converter inputs when the signal bandwidth is within the amplifier's useful range. The single amplifier per package supports compact analog channels requiring independent instrumentation or filtering.
The primary design consideration is deciding whether chopper stabilization is preferable to a conventional precision amplifier. Use the ICL7650CSD+ when low-frequency offset performance is more important than avoiding modulation-related artifacts. For applications requiring wide signal bandwidth, low-noise frequency-domain performance, or no chopping spectrum, evaluate the complete system bandwidth and filtering requirements before finalizing the amplifier selection.
ドロップイン代替品: ICL7650CSD+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ICL7650CSD
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICL7650CSD-T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICL7650CSD+T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICL7650CSD+ 最大定格&電気的特性
| Product Type | Zero-drift chopper-stabilized operational amplifier |
| Amplifier Circuit Count | 1 circuit |
| Gain-Bandwidth Product | 2 MHz |
| パッケージ | 14-SOIC, 3.90 mm width |
| 実装タイプ | Surface mount |
ICL7650CSD+ 14-soic, 3.90 mm width ピン配置ガイド
ICL7650CSD+ (14-soic, 3.90 mm width パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: ICL7650CSD+.
詳細は データシート をご参照ください。
主な用途
ICL7650CSD+ の用途: 6 件s: Precision Sensor Signal Conditioning, Bridge and Strain-Gauge Measurement, Low-Level Current Detection, High-Resolution ADC Front End, Medical and Laboratory Instrumentation, Precision Test and Measurement.
Precision Sensor Signal Conditioning
The ICL7650CSD+ fits low-level sensor front ends where input offset can obscure the useful signal. Its chopper-stabilized architecture is intended to provide low input offset voltage and low input bias current, while the 2 MHz gain-bandwidth product allows closed-loop operation beyond pure DC. Place the amplifier close to the sensor or bridge connection, keep high-impedance input traces short, and add an anti-alias filter at the bandwidth required by the measurement system.
おすすめ
Bridge and Strain-Gauge Measurement
The ICL7650CSD+ can amplify the small differential voltage produced by resistive bridges and strain gauges, where offset drift may be comparable to the sensed quantity. The zero-drift topology is preferable when minimizing slowly varying input-referred error is more important than conventional broadband noise behavior. For a practical bridge circuit, use a stable excitation source, guard high-impedance inputs, and select a closed-loop gain and filter bandwidth appropriate to the 2 MHz gain-bandwidth product.
おすすめ
Low-Level Current Detection
The ICL7650CSD+ is suitable for amplifying small shunt or current-sense voltages while minimizing static offset contribution. Its 2 MHz gain-bandwidth product supports more than DC-only signal paths, but the useful closed-loop bandwidth remains governed by gain, stability, output swing, and the filtering requirement. Keep the shunt return and amplifier ground on the same low-impedance path, and verify that input common-mode voltage and output swing remain within the manufacturer limits.
おすすめ
High-Resolution ADC Front End
The ICL7650CSD+ can serve as the analog gain stage preceding a high-resolution analog-to-digital converter when the converter input is small and precision matters. Low input offset voltage and low input bias current help preserve the code range represented by the sensor signal. Select a closed-loop gain that preserves stability, check the amplifier output range against the converter's input range, and use an RC anti-alias filter to remove both out-of-band noise and chopper-related artifacts.
おすすめ
Medical and Laboratory Instrumentation
The ICL7650CSD+ fits laboratory and medical instrumentation channels that amplify low-level physiological or analytical signals. The chopper-stabilized architecture addresses offset-related error, while the single-amplifier 14-SOIC package supports compact multi-channel analog boards. Each channel should be evaluated for leakage, isolation, filtering, and noise separation; the amplifier's modulation spectrum must not be allowed to reach sensitive downstream measurement stages.
おすすめ
Precision Test and Measurement
The ICL7650CSD+ can be used in bench and automated measurement systems to amplify small outputs from sensors, dividers, or laboratory sources. Its 2 MHz gain-bandwidth product permits useful closed-loop bandwidth beyond DC, enabling moderate-bandwidth signal capture when combined with proper filtering. Use a low-noise reference supply, short feedback components, and a defined anti-alias network, then characterize gain, output noise, and residual modulation across the required frequency range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ICL7650CSD+ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ICL7650CSD | ICL7650CSD-T | ICL7650CSD+T |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-SOIC (3.90 mm width) | 14-SOIC (3.90 mm width) | 14-SOIC (3.90 mm width) | 14-SOIC (3.90 mm width) |
| Stabilization Type | Zero-drift chopper-stabilized | Zero-drift chopper-stabilized | Zero-drift chopper-stabilized | Zero-drift chopper-stabilized |
| Ordering Form | ICL7650CSD+ | ICL7650CSD | ICL7650CSD-T | ICL7650CSD+T |
主な差別化要因
- Single-circuit precision amplifier in an established 14-SOIC footprint (vs ICL7650CSD)
- Documented 2 MHz gain-bandwidth product (vs ICL7650CSD)
- Low-offset architecture for precision signal paths (vs ICL7650CSD-T)
設計ノート
Chopper-stabilized amplifiers produce internally modulated signals that may appear around the switching carrier. Establish the highest required signal frequency before selecting the closed-loop gain, then design a low-pass network with adequate phase margin. Place the filter close to the amplifier or ADC input and validate the complete cascade with both time-domain and spectrum measurements.
Keep the feedback loop physically small and connect the input and return paths using quiet, low-impedance traces. High-impedance sensor inputs should be short and guarded because their leakage and capacitance can create errors that are much larger than the amplifier's offset. Place input and output decoupling capacitors near their associated pins, following the manufacturer layout guidance in the family data sheet.
Do not select the ICL7650CSD+, ICL7650CSD, ICL7650CSD-T, or ICL7650CSD+T solely by package and description. Confirm the ordering suffix, temperature range, electrical limits, and qualification requirements for the specific production environment. In particular, the tape-and-reel ordering code changes assembly packaging rather than constituting a different circuit design.
コンプライアンス情報
Compliance status for the exact ICL7650CSD+ ordering code must be confirmed from the current manufacturer product documentation and material declarations.