Texas Instruments

INA105KUE4 - Precision Unity-Gain Differential Amplifier | TI

MPN: INA105KUE4 ✓ Active
500 µV Vdss 20 nA Id 8-pin SOIC Package
MOQ: 1 |

INA105KUE4 Overview

The Texas Instruments INA105KUE4 is a precision unity-gain differential amplifier with a nominal gain of 1, 1 MHz bandwidth, and a 3 V/µs slew rate, packaged in an 8-pin SOIC. It combines a precision operational amplifier with an integrated, laser-trimmed metal-film resistor network to provide accurate differential gain and high common-mode rejection without external matched resistors.

A unity-gain differential amplifier is an instrumentation amplifier building block that transfers the difference between two input signals while rejecting common-mode voltage and noise. The INA105 belongs to the broader hierarchy of differential amplifiers, instrumentation amplifiers, analog amplifiers, and signal-chain semiconductors. Its internal resistor network simplifies precision bridge, current-sense, and measurement designs where signal subtraction is required but a variable gain is unnecessary.

The main electrical characteristics include a 1 MHz gain-bandwidth product, 3 V/µs slew rate, and 90 dB common-mode rejection as identified for the INA105KUE4. The operating temperature range is -40°C to +85°C, and the device accepts positive and negative supply voltages. The SOIC-8 package supports conventional surface-mount assembly and preserves access to the reference, input, output, and supply pins.

Internally, the INA105 combines a precision operational-amplifier core with on-chip metal-film resistors. Laser trimming improves resistor matching and gain accuracy, while the matched network's temperature coefficient behavior helps preserve common-mode rejection and differential gain over operating temperature. The unity-gain topology removes the need to calculate or match external gain-setting resistors.

Typical applications include differential bridge sensing, instrumentation signal conditioning, current measurement, precision amplifier front ends, and rejection of common-mode disturbances in industrial control or test systems. The 1 MHz bandwidth supports signals below that frequency, while the 3 V/µs slew rate limits large-signal response. Input common-mode and output swing must remain within the datasheet limits for the selected supply voltage.

For PCB design, place the device close to the source of differential signals, maintain short and symmetric input traces, and provide a quiet reference connection when the reference pin is used. Check supply bypassing and unused-pin requirements against the manufacturer pin description and typical application circuit. Verify input polarity, common-mode range, output swing, and stability before scaling the signal chain.

This page combines the manufacturer's device description with a structured specification review, practical application guidance, and drop-in replacement analysis. It highlights where the INA105KUE4 is appropriate and where a different package, gain setting, or amplifier architecture should be selected.

Drop-in alternatives for INA105KUE4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with INA105KUE4 (same form factor and footprint).

INA105KU

✅ Drop-In
Texas Instruments
📦 SOIC-8
Precision unity-gain differential amplifier · 1 · 1 (unity gain) · 500 uV · 1 MHz · -40°C to +85°C · 86 dB over temperature · 0.01%

Contact for price

View Datasheet →

AMP03GSZ

✅ Drop-In
📦 SOIC-8
Both provide unity-gain differential amplification with an integrated matched resistor network; the cited comparison does not quantify offset, bandwidth, common-mode range, or supply-range differences

📋 Reference alternative (not in catalog)

INA105KUE4 Maximum Ratings & Electrical Characteristics

Amplifier Type Precision unity-gain differential amplifier
Number of Amplifiers 1 circuit
Nominal Differential Gain 1 V/V
Gain-Bandwidth Product 1 MHz
Slew Rate 3 V/µs
Maximum Input Offset Voltage 500 µV
Common-Mode Rejection Ratio 90 dB
Input Bias Current 20 nA
Operating Temperature Range -40°C to +85°C
Package 8-pin SOIC
Mounting Type Surface mount
Integrated Resistor Network Laser-trimmed on-chip metal-film network
RoHS Status Compliant
Capacitive Load Drive Supported
Reference Pin Present

INA105KUE4 Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 V+ — Positive supply voltage
Pin 2 IN+ — Noninverting input
Pin 3 IN- — Inverting input
Pin 4 V- — Negative supply voltage
Pin 5 NC — Not connected
Pin 6 REF — Reference input
Pin 7 OUT — Differential amplifier output
Pin 8 NC — Not connected

Typical Applications

INA105KUE4 is suitable for 6 applications: Precision Bridge Sensor Measurement, Current Sense Signal Conditioning, Instrumentation Signal Conditioning, Common-Mode Noise Rejection, Precision Difference Amplifier, Industrial Process Monitoring.

🏭

Precision Bridge Sensor Measurement

The INA105KUE4 is appropriate for bridge sensor front ends because its nominal unity gain preserves the differential bridge signal while its integrated resistor network supports accurate subtraction and a specified 90 dB common-mode rejection ratio. Place the device close to the bridge excitation and sensing nodes to minimize pickup on the two inputs. The 1 MHz bandwidth comfortably covers many strain, pressure, and load-cell signals, while the 3 V/µs slew rate supports faster edges. Before finalizing the circuit, verify that the bridge excitation voltage keeps both inputs inside the common-mode range and that the amplified output remains within the device's linear swing limits.

⚡

Current Sense Signal Conditioning

The INA105KUE4 can condition a small differential voltage produced by a current-sense element while rejecting the high common-mode voltage present across the shunt. Its unity-gain topology avoids external matched gain resistors, and the laser-trimmed internal network is designed to maintain accurate gain and common-mode rejection. The 1 MHz bandwidth is suitable for many power-conversion and motor-control feedback paths, although the 3 V/µs slew rate may become relevant for fast transients. Check the shunt common-mode voltage, output swing, supply headroom, and Kelvin routing before deploying the amplifier.

🖥️

Instrumentation Signal Conditioning

The INA105KUE4 serves as a fixed unity-gain instrumentation block when a differential measurement must be transferred to a downstream ADC without adjustable gain. The internal metal-film network replaces a set of externally matched resistors, reducing component count and gain-error sources. Its 1 MHz bandwidth and 3 V/µs slew rate are suitable for many pressure, position, and process-control sensor channels, while 90 dB common-mode rejection helps preserve small differential signals riding on larger common-mode levels. The design must account for reference-pin configuration, bypass capacitors, input filtering, and output loading to the converter.

🌐

Common-Mode Noise Rejection

The INA105KUE4 is useful when two sensing lines carry the same unwanted voltage and only their difference contains the desired measurement. Its specified 90 dB common-mode rejection and unity-gain internal network allow the device to subtract the common component while preserving differential information. The 1 MHz bandwidth limits the frequency range over which the complete signal can be processed, and the 3 V/µs slew rate determines large-signal response. Place the amplifier near the source, maintain symmetric routing, and verify that neither input exceeds the common-mode range under worst-case excitation and tolerance conditions.

🔧

Precision Difference Amplifier

The INA105KUE4 provides a straightforward way to generate a scaled representation of the voltage difference between two analog sources without external gain-setting components. The internal laser-trimmed resistor network is designed to maintain accurate unity gain and common-mode rejection over temperature. This makes the device suitable for control-loop error signals, transducer outputs, and analog comparison functions where variable gain is not required. Verify signal polarity, source impedances, reference voltage, output headroom, and stability with the intended load before using the part in a new board revision.

🏭

Industrial Process Monitoring

The INA105KUE4 can condition low-level differential signals in industrial monitoring systems where factory transients and common-mode voltage are present. Its 90 dB common-mode rejection, unity-gain accuracy, and -40°C to +85°C operating range suit many measurement channels. The 1 MHz bandwidth is more than adequate for many process-control and diagnostic signals, while the 3 V/µs slew rate provides adequate response for moderate edge rates. Protective filtering, grounding, supply bypassing, and separation from high-current switching paths remain essential for reliable factory operation.

What is the INA105KUE4?
The INA105KUE4 is a precision unity-gain differential amplifier with a nominal gain of 1, 1 MHz bandwidth, and a 3 V/µs slew rate in an 8-pin SOIC package. According to the Texas Instruments INA105 datasheet, it combines a precision operational amplifier with a laser-trimmed on-chip metal-film resistor network. It is intended for instrumentation and measurement circuits that require the difference between two input voltages while rejecting common-mode signals.
What are the key specifications of INA105KUE4 that engineers should know?
The INA105KUE4 provides unity differential gain, 1 MHz bandwidth, a 3 V/µs slew rate, 90 dB common-mode rejection, and a 20 nA input-bias-current specification. It operates from -40°C to +85°C and is offered in an 8-pin SOIC. According to the Texas Instruments datasheet, laser trimming of the internal resistor network improves gain accuracy and common-mode rejection, eliminating the need for externally matched gain resistors.
Where can I download the INA105KUE4 datasheet PDF?
The official INA105KUE4 datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/ina105.pdf. The document contains the electrical characteristics, pin descriptions, typical application circuit, common-mode-range limits, and supply-current behavior. Use the manufacturer's PDF when assigning PCB pins or checking operating limits because secondary mirrors may lag the current manufacturer revision.
Where can I find the INA105KUE4 pinout?
The INA105KUE4 pinout is shown in the pin configuration and pin-description sections of the Texas Instruments INA105 datasheet. It is an 8-pin SOIC with differential inputs, an output, supply connections, a reference connection, and device-specific unused or no-connect positions. Use the pin-description table when assigning tracks because the reference and no-connect pins should not be treated as interchangeable signal terminals.
Where to buy INA105KUE4 online?
The INA105KUE4 can be requested through the Request a Quote form on this page, where the required quantity, packaging, and delivery requirements can be specified. The manufacturer lists the INA105 family in 8-pin plastic SOIC packaging for the KUE4 orderable configuration. No other seller or marketplace is recommended here because component sourcing should be evaluated against the exact suffix, package, date codes, and delivery requirements.
What is the price of INA105KUE4?
Use the Request a Quote form on this page for the current INA105KUE4 unit price and volume breaks. Pricing depends on order quantity, package, date-code requirements, market availability, and delivery terms, so a static quote can become inaccurate quickly. The request should identify INA105KUE4 exactly rather than the broader INA105 family because alternative packages and gain options carry different ordering information.
What is the lead time for INA105KUE4?
Request the current lead time, minimum order quantity, and available date codes through the Request a Quote form on this page. Lead time can change with inventory, order size, packaging, and manufacturing conditions. For production planning, include the required solder-f MSL handling level, incoming inspection schedule, and any approved alternate sourcing plan when submitting the INA105KUE4 request.
Is INA105KUE4 in stock?
Submit an INA105KUE4 stock and delivery request through the Request a Quote form on this page. The form provides the current quotation path for the exact 8-pin SOIC orderable device without implying that stock is available. When requesting a build allocation, state the target quantity, production date, date-code policy, and permitted alternative date codes so the supply response matches the actual assembly plan.
Can AMP03GSZ replace INA105KUE4?
The AMP03GSZ is the closest cross-brand candidate identified for review because it is described as a precision unity-gain differential amplifier using a matched thin-film resistor network. Before replacing an INA105KUE4, verify the SOIC-8 pin mapping, supply range, common-mode range, reference behavior, bandwidth, offset, and output swing against the exact INA105 datasheet. The existence of a matching gain and package does not by itself establish complete pin compatibility.
What can replace INA105KUE4?
The closest identified replacement is the INA105KU from the same manufacturer family, while the AMP03GSZ is a cross-brand unity-gain differential-amplifier candidate. A drop-in replacement must match the 8-pin SOIC footprint, pin functions, supply requirements, input and output ranges, and critical AC parameters. Confirm every pin against the manufacturer datasheet before committing a new revision to production.
Is INA105KU the same as INA105KUE4?
The INA105KU is a closely related 8-pin SOIC orderable member of the INA105 family and is the strongest same-brand replacement candidate. The orderable suffixes can encode packaging, temperature, and qualification information, so the exact manufacturer ordering table must be checked before treating them as identical. Confirm electrical limits, grade, pin mapping, and lifecycle status for INA105KU against the INA105KUE4 requirements.
INA105KUE4 vs INA105KU: which is better for precision instrumentation?
Choose the INA105KUE4 when its specified grade, temperature range, qualification, and lifecycle conditions match the production requirements. Consider the INA105KU when it provides the required 8-pin SOIC configuration and electrical performance at a better sourcing outcome. Because both belong to the INA105 family, their precision topology is similar, but the exact suffix-specific temperature, package, and qualification requirements determine which part is preferable.
When should I choose INA105KUE4 over a variable-gain instrumentation amplifier?
Choose the INA105KUE4 when the required transfer function is a stable unity differential gain and internal resistor matching is more valuable than adjustable gain. Its 1 MHz bandwidth and integrated laser-trimmed network simplify instrumentation front ends, bridge measurements, and common-mode rejection circuits. Select a variable-gain instrumentation amplifier instead when gain switching, programmable attenuation, or lower input bias requirements are central to the design.
Is INA105KUE4 suitable for bridge sensor measurement?
The INA105KUE4 is suitable for bridge sensor measurement when the sensor output fits its 1 MHz bandwidth, input common-mode range, and output swing limits. Its unity differential gain preserves the physical bridge output while the internal resistor network provides accurate subtraction and 90 dB common-mode rejection. Verify excitation voltage, sensor impedance, output span, grounding, and filtering against the exact operating conditions before production.
What design considerations matter for INA105KUE4 signal integrity?
Keep the two input traces short, symmetric, and away from switching nodes so common-mode pickup and timing skew do not degrade differential accuracy. Place input and supply bypass capacitors close to their corresponding pins, use a low-noise reference configuration when REF is connected, and maintain the output within its linear swing range. The Texas Instruments datasheet typical application circuit should also be used to verify stability and loading arrangements.

Engineering reference data for INA105KUE4 — comparison, design guidance, and compliance information.

Selection Guide

Choose the INA105KUE4 when the design requires a fixed unity differential gain, accurate common-mode rejection, and an integrated trimmed resistor network. It is particularly suitable for bridge sensors, current-sense conditioning, and instrumentation channels whose signals remain within the 1 MHz bandwidth and specified input and output ranges. The INA105KU is the closest same-brand option when its suffix-specific grade, qualification, and sourcing conditions satisfy the design, while retaining the familiar SOIC-8 unity-gain architecture. Consider the AMP03GSZ only after verifying its complete pin mapping and electrical limits because unity gain and an 8-pin SOIC package alone do not prove drop-in compatibility. Use a variable-gain instrumentation amplifier instead when programmable gain, gain switching, or lower bias current is required.

Comparison with Alternatives

Parameter This Product INA105KU AMP03GSZ
Brand Texas Instruments Texas Instruments Analog Devices
Package SOIC-8 SOIC-8 SOIC-8
Amplifier Type Precision unity-gain differential amplifier Precision unity-gain differential amplifier Precision unity-gain differential amplifier
Nominal Gain 1 V/V 1 V/V 1 V/V
Integrated Resistor Network Laser-trimmed on-chip metal-film network Laser-trimmed on-chip metal-film network Matched thin-film resistor network

Key Differentiators

  • Factory-trimmed unity-gain network (vs AMP03GSZ)
  • Same-manufacturer family support (vs AMP03GSZ)
  • Specified industrial temperature operation (vs AMP03GSZ)

Design Notes

Route the two differential inputs as a compact, symmetric pair and connect the amplifier close to the signal source. Differential traces should have similar lengths and geometries so switching pickup and timing skew are converted into common-mode or differential error equally on both inputs. Keep the circuit away from motor-switching nodes, power inductors, and high-current return paths. For bridge sensors, use a ground-plane layout and place any input filtering close to the input pins.

Confirm the input common-mode range, output swing, and supply limits before treating the INA105KUE4 as a transparent unity-gain buffer. A signal can be within the differential range yet produce an unusable result if both inputs exceed the permitted common-mode voltage or the output saturates near a supply rail. Also account for REF behavior, unused pins, output loading, and source impedance. Use the manufacturer pin-description and typical application circuit when completing the schematic.

Place the required bypass capacitors close to the supply pins and connect them to a low-impedance ground return. Decoupling helps isolate the precision amplifier from supply ripple and nearby switching currents, while careful grounding limits the noise coupled through the 90 dB common-mode rejection specification. Do not route high-current supply or return paths through the sensitive input reference area. Check capacitor voltage rating, dielectric behavior, and the stability conditions shown in the datasheet.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified in the part listing. The manufacturer datasheet describes laser-trimmed metal-film resistors and accurate gain and common-mode rejection, but the listed content does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status.

Related Searches

INA105KUE4 datasheet INA105KUE4 pinout INA105KUE4 datasheet pdf INA105KUE4 equivalent INA105KUE4 replacement INA105KUE4 vs INA105KU INA105KUE4 vs AMP03GSZ Texas Instruments INA105KUE4 INA105KUE4 SOIC-8 footprint INA105KUE4 unity gain amplifier INA105KUE4 bridge sensor application INA105KUE4 price

Related Components & Terms

Texas Instruments INA105KUE4 INA105 INA105KU AMP03GSZ Analog Devices precision unity-gain differential amplifier differential amplifier instrumentation amplifier analog amplifier signal-chain semiconductor common-mode rejection ratio CMRR gain-bandwidth product slew rate input offset voltage input common-mode range laser-trimmed resistor network metal-film resistor network thin-film resistor network SOIC-8 surface mount RoHS bridge sensor current-sense amplifier
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details