INA105KUE4 - Precision Unity-Gain Differential Amplifier | TI
MPN: INA105KUE4 ✓ AktifINA105KUE4 Genel Bakış
A unity-gain differential amplifier is an instrumentation amplifier building block that transfers the difference between two input signals while rejecting common-mode voltage and noise. The INA105 belongs to the broader hierarchy of differential amplifiers, instrumentation amplifiers, analog amplifiers, and signal-chain semiconductors. Its internal resistor network simplifies precision bridge, current-sense, and measurement designs where signal subtraction is required but a variable gain is unnecessary.
The main electrical characteristics include a 1 MHz gain-bandwidth product, 3 V/µs slew rate, and 90 dB common-mode rejection as identified for the INA105KUE4. The operating temperature range is -40°C to +85°C, and the device accepts positive and negative supply voltages. The SOIC-8 package supports conventional surface-mount assembly and preserves access to the reference, input, output, and supply pins.
Internally, the INA105 combines a precision operational-amplifier core with on-chip metal-film resistors. Laser trimming improves resistor matching and gain accuracy, while the matched network's temperature coefficient behavior helps preserve common-mode rejection and differential gain over operating temperature. The unity-gain topology removes the need to calculate or match external gain-setting resistors.
Typical applications include differential bridge sensing, instrumentation signal conditioning, current measurement, precision amplifier front ends, and rejection of common-mode disturbances in industrial control or test systems. The 1 MHz bandwidth supports signals below that frequency, while the 3 V/µs slew rate limits large-signal response. Input common-mode and output swing must remain within the datasheet limits for the selected supply voltage.
For PCB design, place the device close to the source of differential signals, maintain short and symmetric input traces, and provide a quiet reference connection when the reference pin is used. Check supply bypassing and unused-pin requirements against the manufacturer pin description and typical application circuit. Verify input polarity, common-mode range, output swing, and stability before scaling the signal chain.
This page combines the manufacturer's device description with a structured specification review, practical application guidance, and drop-in replacement analysis. It highlights where the INA105KUE4 is appropriate and where a different package, gain setting, or amplifier architecture should be selected.
Drop-in alternatifler için INA105KUE4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller INA105KUE4 (aynı form faktörü ve ayağa oturma).
INA105KU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AMP03GSZ
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
INA105KUE4 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Precision unity-gain differential amplifier |
| Number of Amplifiers | 1 circuit |
| Nominal Differential Gain | 1 V/V |
| Gain-Bandwidth Product | 1 MHz |
| Slew Rate | 3 V/µs |
| Maximum Input Offset Voltage | 500 µV |
| Common-Mode Rejection Ratio | 90 dB |
| Input Bias Current | 20 nA |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| Paket | 8-pin SOIC |
| Montaj Türü | Surface mount |
| Integrated Resistor Network | Laser-trimmed on-chip metal-film network |
| RoHS Durumu | Compliant |
| Capacitive Load Drive | Supported |
| Reference Pin | Present |
INA105KUE4 Pin Yapısı
| Pin 1 | V+ — Positive supply voltage |
| Pin 2 | IN+ — Noninverting input |
| Pin 3 | IN- — Inverting input |
| Pin 4 | V- — Negative supply voltage |
| Pin 5 | NC — Not connected |
| Pin 6 | REF — Reference input |
| Pin 7 | OUT — Differential amplifier output |
| Pin 8 | NC — Not connected |
Tipik Uygulamalar
INA105KUE4 için uygundur 6 uygulamas: Precision Bridge Sensor Measurement, Current Sense Signal Conditioning, Instrumentation Signal Conditioning, Common-Mode Noise Rejection, Precision Difference Amplifier, Industrial Process Monitoring.
Precision Bridge Sensor Measurement
The INA105KUE4 is appropriate for bridge sensor front ends because its nominal unity gain preserves the differential bridge signal while its integrated resistor network supports accurate subtraction and a specified 90 dB common-mode rejection ratio. Place the device close to the bridge excitation and sensing nodes to minimize pickup on the two inputs. The 1 MHz bandwidth comfortably covers many strain, pressure, and load-cell signals, while the 3 V/µs slew rate supports faster edges. Before finalizing the circuit, verify that the bridge excitation voltage keeps both inputs inside the common-mode range and that the amplified output remains within the device's linear swing limits.
Önerilen
Current Sense Signal Conditioning
The INA105KUE4 can condition a small differential voltage produced by a current-sense element while rejecting the high common-mode voltage present across the shunt. Its unity-gain topology avoids external matched gain resistors, and the laser-trimmed internal network is designed to maintain accurate gain and common-mode rejection. The 1 MHz bandwidth is suitable for many power-conversion and motor-control feedback paths, although the 3 V/µs slew rate may become relevant for fast transients. Check the shunt common-mode voltage, output swing, supply headroom, and Kelvin routing before deploying the amplifier.
Önerilen
Instrumentation Signal Conditioning
The INA105KUE4 serves as a fixed unity-gain instrumentation block when a differential measurement must be transferred to a downstream ADC without adjustable gain. The internal metal-film network replaces a set of externally matched resistors, reducing component count and gain-error sources. Its 1 MHz bandwidth and 3 V/µs slew rate are suitable for many pressure, position, and process-control sensor channels, while 90 dB common-mode rejection helps preserve small differential signals riding on larger common-mode levels. The design must account for reference-pin configuration, bypass capacitors, input filtering, and output loading to the converter.
Önerilen
Common-Mode Noise Rejection
The INA105KUE4 is useful when two sensing lines carry the same unwanted voltage and only their difference contains the desired measurement. Its specified 90 dB common-mode rejection and unity-gain internal network allow the device to subtract the common component while preserving differential information. The 1 MHz bandwidth limits the frequency range over which the complete signal can be processed, and the 3 V/µs slew rate determines large-signal response. Place the amplifier near the source, maintain symmetric routing, and verify that neither input exceeds the common-mode range under worst-case excitation and tolerance conditions.
Önerilen
Precision Difference Amplifier
The INA105KUE4 provides a straightforward way to generate a scaled representation of the voltage difference between two analog sources without external gain-setting components. The internal laser-trimmed resistor network is designed to maintain accurate unity gain and common-mode rejection over temperature. This makes the device suitable for control-loop error signals, transducer outputs, and analog comparison functions where variable gain is not required. Verify signal polarity, source impedances, reference voltage, output headroom, and stability with the intended load before using the part in a new board revision.
Önerilen
Industrial Process Monitoring
The INA105KUE4 can condition low-level differential signals in industrial monitoring systems where factory transients and common-mode voltage are present. Its 90 dB common-mode rejection, unity-gain accuracy, and -40°C to +85°C operating range suit many measurement channels. The 1 MHz bandwidth is more than adequate for many process-control and diagnostic signals, while the 3 V/µs slew rate provides adequate response for moderate edge rates. Protective filtering, grounding, supply bypassing, and separation from high-current switching paths remain essential for reliable factory operation.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: INA105KUE4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | INA105KU | AMP03GSZ |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Analog Devices |
| Package | SOIC-8 | SOIC-8 | SOIC-8 |
| Amplifier Type | Precision unity-gain differential amplifier | Precision unity-gain differential amplifier | Precision unity-gain differential amplifier |
| Nominal Gain | 1 V/V | 1 V/V | 1 V/V |
| Integrated Resistor Network | Laser-trimmed on-chip metal-film network | Laser-trimmed on-chip metal-film network | Matched thin-film resistor network |
Ana Farklılayıcılar
- Factory-trimmed unity-gain network (karşılaştırma:AMP03GSZ)
- Same-manufacturer family support (karşılaştırma:AMP03GSZ)
- Specified industrial temperature operation (karşılaştırma:AMP03GSZ)
Tasarım Notları
Route the two differential inputs as a compact, symmetric pair and connect the amplifier close to the signal source. Differential traces should have similar lengths and geometries so switching pickup and timing skew are converted into common-mode or differential error equally on both inputs. Keep the circuit away from motor-switching nodes, power inductors, and high-current return paths. For bridge sensors, use a ground-plane layout and place any input filtering close to the input pins.
Confirm the input common-mode range, output swing, and supply limits before treating the INA105KUE4 as a transparent unity-gain buffer. A signal can be within the differential range yet produce an unusable result if both inputs exceed the permitted common-mode voltage or the output saturates near a supply rail. Also account for REF behavior, unused pins, output loading, and source impedance. Use the manufacturer pin-description and typical application circuit when completing the schematic.
Place the required bypass capacitors close to the supply pins and connect them to a low-impedance ground return. Decoupling helps isolate the precision amplifier from supply ripple and nearby switching currents, while careful grounding limits the noise coupled through the 90 dB common-mode rejection specification. Do not route high-current supply or return paths through the sensitive input reference area. Check capacitor voltage rating, dielectric behavior, and the stability conditions shown in the datasheet.
Uyumluluk Bilgisi
RoHS compliance is identified in the part listing. The manufacturer datasheet describes laser-trimmed metal-film resistors and accurate gain and common-mode rejection, but the listed content does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status.