onsemi

LM2902VDTB - Quad 3-26V Low-Power Op Amp | onsemi

MPN: LM2902VDTB ✓ Active
3 V to 26 V Vdss 14-TSSOP Package
MOQ: 1 |

LM2902VDTB Overview

The onsemi LM2902VDTB is a four-circuit general-purpose operational amplifier designed for single-supply operation from 3 V to 26 V, with true differential inputs and a 14-TSSOP package. The device provides four independent amplifier channels in one compact surface-mount package, making it useful where PCB area is limited but low-cost signal conditioning is required. Its low-power design and broad supply-voltage range support industrial, instrumentation, control, and analog-interface applications.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The LM2902 belongs to the general-purpose operational-amplifier family within the broader hierarchy of amplifier ICs, analog ICs, and semiconductors. Its true differential-input architecture is particularly useful in single-supply circuits because the input common-mode range extends close to the positive supply rail, allowing signals to be measured without a separate negative supply in many designs.

The LM2902 provides four amplifier circuits per package, a 3 V to 26 V operating supply range, and low-power operation in a 14-TSSOP package. These characteristics make it a practical choice for sensor interfaces, current measurements, voltage comparisons, audio signal paths, and general feedback-control circuits. Compared with a discrete single op amp, the integrated quad reduces component count and simplifies power distribution while preserving independent channels for multiple analog functions.

Each channel includes the core functionality expected from a general-purpose amplifier: differential input handling, high open-loop gain, single-supply operation, and output-stage drive suitable for common low-frequency analog networks. Because the four channels share one package, their supply pins and ground reference are common, but the channels remain independent amplifiers. This architecture is useful when one circuit performs input buffering, another provides gain, and two additional channels implement filtering or threshold comparisons.

Typical applications include sensor signal conditioning in industrial systems, audio preamplification, low-voltage logic threshold detection, closed-loop control, current sensing with a sense resistor, and general-purpose instrumentation. The 14-TSSOP outline also helps reduce board area compared with four individual SOIC-8 packages, although the relatively narrow lead pitch requires careful PCB layout and clean assembly practices.

When connecting the LM2902VDTB, verify input and output voltage limits against the selected supply configuration, including the effects of ground offsets and saturation. Decoupling capacitors should be placed close to the supply pins, while sensitive analog traces should remain short and away from switching nodes. The manufacturer datasheet should be used for exact pin assignments, input common-mode limits, output swing, electrical characteristics, and recommended application circuits.

This product page combines the manufacturer device identity with package and supply information, engineering-focused application guidance, drop-in replacement analysis, and practical PCB considerations. It supports faster component selection while directing engineers to the authoritative onsemi datasheet for design-critical electrical limits and package details.

Drop-in alternatives for LM2902VDTB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LM2902VDTB (same form factor and footprint) — differing in Package, Number of Channels, Power Class, Product Type.

onsemi
Product Type: Quad operational amplifier
Compare with LM2902VDTB →
onsemi
Package: 14-pin TSSOP
Number of Channels: 4 channels
Power Class: Low-power operational amplifier
Compare with LM2902VDTB →
onsemi
Product Type: Single-supply quad operational amplifier
Compare with LM2902VDTB →

LM2902VDTBR2G

✅ Drop-In
onsemi
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 circuits · 3 V to 26 V · Low-power · Extended temperature · True differential inputs · 14-TSSOP · Thin small-outline package

Contact for price

View Datasheet →

LM2902VDTBR2

✅ Drop-In
onsemi
📦 TSSOP-14
Single-supply quad operational amplifier · 4 circuits · 3 V to 26 V · -40°C to +105°C · 40 mA maximum · 90 nA maximum · True differential input · 14-TSSOP

Contact for price

View Datasheet →

LM2902DTB

✅ Drop-In
onsemi
📦 TSSOP-14
Quad operational amplifier · onsemi · 3 V to 26 V · 4 circuits · 14-TSSOP · Surface mount · 1.2 MHz · 2 mV

Contact for price

View Datasheet →

LM2902VDTBG

✅ Drop-In
onsemi
📦 TSSOP-14
4 amplifiers · Standard general-purpose operational amplifier · 3 V to 26 V · Bipolar operational amplifier · 7000 uV · Extended temperature · Low-power operational amplifier · 14-pin TSSOP

Contact for price

View Datasheet →

LM2902VDTB Maximum Ratings & Electrical Characteristics

Number of Amplifier Channels 4 circuits
Operating Supply Voltage 3 V to 26 V
Power Class Low power
Input Architecture True differential inputs
Package 14-TSSOP
Mounting Type Surface mount
Product Category General-purpose operational amplifier
Number of Channels 4

LM2902VDTB 14-tssop Pin Configuration Guide

Pin configuration for LM2902VDTB (14-tssop package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-tssop package pinout diagram for LM2902VDTB

No detailed pinout data available for LM2902VDTB.

Refer to the datasheet for full pin configuration.

Typical Applications

LM2902VDTB is suitable for 6 applications: Industrial Sensor Signal Conditioning, Audio Preamplification, Current-Sense Amplifier, Threshold Detection and Logic Interface, Closed-Loop Control, General-Purpose Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM2902VDTB suits industrial sensor interfaces because four channels can buffer, amplify, filter, and compare signals without requiring four separate amplifier packages. Its 3 V to 26 V operating range covers common regulated and industrial supply levels, while true differential inputs help process sensor voltages referenced to a shared ground. Place the amplifier close to the sensor and ADC input, use short grounded traces, and decouple the supply pins to reduce pickup. The principal trade-off is general-purpose performance: applications requiring extremely low offset, rail-to-rail output, or very high bandwidth should use a more specialized amplifier.

🎧

Audio Preamplification

The LM2902VDTB can provide multiple gain stages for low-frequency audio paths because it contains four general-purpose operational-amplifier channels in one 14-TSSOP package. The 3 V to 26 V supply range supports several portable and fixed-system supply arrangements, and the low-power design avoids the excess dissipation associated with unnecessary amplifier stages. Use each channel for a defined gain or filtering function and keep feedback components close to their associated pins. Confirm the required output swing and bandwidth against the manufacturer datasheet before using the device for high-fidelity or high-drive applications.

⚡

Current-Sense Amplifier

A low-side shunt-current measurement circuit can use one LM2902VDTB channel to amplify the small differential voltage generated across a sense resistor. The device's true differential-input architecture helps reject common-mode voltage, and its 3 V to 26 V operating range supports operation from low-voltage and industrial rails. Additional channels can monitor the shunt voltage, implement a threshold, or filter the amplified output. Select resistor and feedback values for the intended gain, verify that signal common-mode voltage stays within the datasheet limits, and connect the supply return cleanly to minimize ground-offset error.

🧩

Threshold Detection and Logic Interface

The LM2902VDTB is useful for translating a slowly varying analog condition into a threshold decision. One channel can compare a sensor voltage against a reference, while other channels can buffer the reference, amplify the decision signal, or provide additional comparisons. Its 3 V to 26 V supply range permits operation across many 5 V, 12 V, and higher industrial rails, and the four-channel package simplifies multi-channel monitoring. For reliable detection, allow the comparator input to cross the threshold with adequate noise margin and observe the output-swing limits stated in the onsemi datasheet.

🔧

Closed-Loop Control

The LM2902VDTB can implement basic closed-loop controllers where four analog channels are required on a compact board. Typical arrangements use one channel in a feedback amplifier, another to shape a reference, and two channels to control auxiliary stages or monitor system conditions. The low-power quad architecture reduces package count, while the 3 V to 26 V supply range accommodates several industrial control environments. Check loop stability, output-current capability, capacitive-load behavior, and saturation recovery against the manufacturer datasheet, particularly when driving long cables or slow actuator inputs.

📟

General-Purpose Instrumentation

The LM2902VDTB is well suited to bench and field instrumentation that needs several low-frequency analog functions in one package. Four channels can handle input buffering, gain, active filtering, and output conditioning while operating from a 3 V to 26 V source. The 14-TSSOP footprint reduces board area compared with separate single-channel packages, and true differential inputs are useful for measurement nodes with small signal differences. Keep sensitive inputs away from motor, relay, and switching-regulator traces, provide local bypass capacitance, and validate offset and noise performance against the minimum system accuracy requirement.

What is the onsemi LM2902VDTB?
The onsemi LM2902VDTB is a four-circuit general-purpose operational amplifier with true differential inputs, a 3 V to 26 V supply range, and a 14-TSSOP package. According to the onsemi LM2902 datasheet, the device combines four amplifiers in one surface-mount package and supports single-supply operation, making it suitable for compact analog signal-conditioning and control circuits.
What is the supply voltage range of LM2902VDTB?
The LM2902VDTB operates from 3 V to 26 V, as identified by onsemi and the manufacturer datasheet for the LM2902 family. This range allows the amplifier to operate from regulated 5 V or 12 V rails and from higher industrial supply levels after appropriate protection and filtering. Check the final operating voltage against the datasheet limits and system transients.
How many op amps are in the LM2902VDTB package?
The LM2902VDTB contains four independent operational-amplifier circuits in one 14-TSSOP package. According to the onsemi LM2902 datasheet, this quad configuration can replace four separate single-channel amplifiers while reducing package count. The channels share supply connections but can perform separate buffering, amplification, filtering, or comparison functions.
Where can I download the LM2902VDTB datasheet PDF?
The LM2902VDTB datasheet PDF is available through onsemi's LM2902 product documentation and through the listed LM2902VDTB documentation page. The manufacturer datasheet is the preferred source for pin assignments, electrical characteristics, input common-mode limits, output swing, supply-current behavior, and recommended applications. Use the exact LM2902 family document appropriate to the ordered device revision.
Where is the LM2902VDTB pinout?
The LM2902VDTB pinout is defined by the pin-description table in the onsemi LM2902 datasheet for the 14-TSSOP package. The package contains four operational-amplifier channels, power pins, and ground pins across 14 leads. Because signal names and exposed thermal-pad details depend on the exact package drawing, assign PCB tracks directly from the manufacturer pin table.
Is LM2902VDTB suitable for single-supply applications?
Yes, the LM2902VDTB is suitable for single-supply applications because the onsemi LM2902 family is designed for low-cost operation from a single supply and includes true differential inputs. According to the manufacturer datasheet, its input characteristics support common single-supply signal-conditioning arrangements, although inputs and outputs must remain within the specified common-mode and output-swing limits.
LM2902VDTB vs LM2902DTB - which is the better choice?
The LM2902VDTB and LM2902DTB are both listed as 14-TSSOP versions of the onsemi LM2902 four-channel amplifier family. Their listed channel count, supply range, and package are equivalent, while exact electrical details may depend on the ordering code. Choose LM2902VDTB for an exact match to the target footprint and consult the onsemi datasheet before substituting LM2902DTB.
When should I choose LM2902VDTB over another quad op amp?
Choose LM2902VDTB when a design needs four general-purpose amplifier channels, operation from 3 V to 26 V, true differential inputs, and a compact 14-TSSOP package. According to the onsemi datasheet, its low-power architecture is appropriate for sensor interfaces, comparisons, buffering, and control loops. Select a different amplifier when wider bandwidth, lower offset, rail-to-rail output, or automotive qualification is required.
What is the best drop-in replacement for LM2902VDTB?
The closest same-manufacturer drop-in choices identified for the LM2902VDTB are LM2902VDTBR2G and LM2902VDTBR2, both associated with the same 14-TSSOP quad-amplifier configuration. A replacement is suitable only when its ordering code, qualification level, electrical limits, and shipment form meet the original design requirements. Confirm the exact pinout and datasheet limits before substitution.
Can LM2902VDTBR2G replace LM2902VDTB?
LM2902VDTBR2G can function as a pin-compatible replacement for LM2902VDTB when the system accepts its qualification and ordering details. The documented 14-TSSOP configuration and four-channel architecture match the target, while the manufacturer-specific R2G designation may identify additional qualification or traceability requirements. Compare the complete onsemi datasheets and preserve the required tape-and-reel orientation.
What can replace the LM2902VDTB in a drop-in design?
Drop-in alternatives for LM2902VDTB include onsemi LM2902VDTBR2G, LM2902VDTBR2, and LM2902DTB when the 14-TSSOP footprint and four-channel arrangement satisfy the design. According to the onsemi documentation, these parts share the core LM2902 function. Verify supply limits, input range, offset, bandwidth, stability, qualification, and exact pin names before approving any substitution.
Is LM2902VDTB the same as LM2902VDTBR2?
The LM2902VDTB and LM2902VDTBR2 share the onsemi LM2902 four-channel operational-amplifier architecture and the 14-TSSOP format. They are not interchangeable solely from the ordering codes: qualification, marking, temperature coverage, and ordering options can differ. Compare the manufacturer datasheet and orderable-part details before treating them as identical.
Where can I buy LM2902VDTB and request a quote?
Use the Request a Quote form on this page to request LM2902VDTB pricing, stock confirmation, lead time, and order quantities. The component is cataloged as a 14-TSSOP, four-circuit, 3 V to 26 V general-purpose operational amplifier from onsemi. Include the required quantity, shipment form, and target date in the quote request for an actionable response.
Is LM2902VDTB in stock and what is the lead time?
Stock and lead time for LM2902VDTB should be confirmed through the Request a Quote form on this page because inventory changes continuously by package, quantity, and shipment form. Product listings describe the LM2902VDTB as a 14-TSSOP, four-circuit amplifier from onsemi. Provide your required quantity and production schedule so the current manufacturing and allocation status can be reviewed.
What are the key specifications of LM2902VDTB that engineers should know?
The key LM2902VDTB specifications are four amplifier channels, a 3 V to 26 V operating supply, true differential inputs, low-power operation, and a 14-TSSOP package. According to the onsemi LM2902 datasheet, the quad architecture reduces the package count compared with four discrete amplifiers. Design-critical values such as offset voltage, bandwidth, slew rate, common-mode range, and output swing remain in the manufacturer datasheet.

Engineering reference data for LM2902VDTB — comparison, design guidance, and compliance information.

Selection Guide

Choose LM2902VDTB when the design needs four general-purpose amplifier channels, true differential inputs, operation across a 3 V to 26 V supply range, and a 14-TSSOP package. LM2902VDTBR2G is the closest identified onsemi alternative when its qualification and orderable-part details meet the product requirements; LM2902VDTBR2 offers the same core package and architecture. Consider LM2902DTB when its exact ordering, marking, and electrical characteristics are preferable for the production design. These alternatives share the identified footprint, but they are not automatically identical in qualification or traceable ordering details. Choose a different amplifier family if the application requires rail-to-rail inputs or outputs, substantially lower offset, higher slew rate, greater bandwidth, or a verified automotive qualification level.

Comparison with Alternatives

Parameter This Product LM2902VDTBR2G LM2902VDTBR2 LM2902DTB LM2902VDTBG
Package TSSOP-14 TSSOP-14 - same TSSOP-14 - same TSSOP-14 - same TSSOP-14 - same
Brand onsemi onsemi onsemi onsemi onsemi
Number of Amplifier Channels 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Operating Supply Voltage 3 V to 26 V 3 V to 26 V 3 V to 26 V 3 V to 26 V 3 V to 26 V
Product Category General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Key Differentiators

  • Matches the identified 14-TSSOP LM2902 replacement architecture (vs LM2902VDTBR2G)
  • Direct family replacement with matching channel count and voltage range (vs LM2902VDTBR2)
  • Site-linked onsemi ordering option with the same identified footprint (vs LM2902DTB)

Design Notes

Place the local supply bypass capacitor directly between the LM2902VDTB supply and ground pins, and keep the connection as short as practical. The 14-TSSOP footprint has a narrow lead pitch, so long loops around the package can increase inductive impedance and allow switching noise to enter the amplifier inputs. Route sensitive input and feedback nets away from power converters, relays, inductors, and high-current return paths.

Assign one physical function to each amplifier channel and keep each input, feedback component, and output connection localized around that channel. Avoid sharing long feedback traces between channels because capacitive coupling in a compact TSSOP layout can create oscillation or crosstalk. Where differential inputs are used, route the positive and negative conductors together and terminate the source close to the amplifier to reduce common-mode pickup.

Do not assume that a quad operational amplifier can operate with inputs or outputs arbitrarily close to the negative or positive supply rail. Consult the onsemi LM2902 datasheet for input common-mode range, output swing, supply-current, and stability limits. Also avoid using the device as a general-purpose comparator without accounting for propagation delay, saturation behavior, and output swing when the input crosses the threshold.

For low-level sensor measurements, minimize ground offsets by returning shunt or sensor current through the same ground structure used by the amplifier. Keep feedback resistors physically close to their associated pins and avoid routing the output near sensitive inputs. If the source has high source impedance, add an appropriate buffer stage or verify that the selected biasing produces acceptable offset and bandwidth behavior.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Use the current onsemi LM2902 product documentation and orderable-part declarations for environmental and material-compliance requirements.

Related Searches

LM2902VDTB datasheet LM2902VDTB pinout LM2902VDTB datasheet pdf LM2902VDTB equivalent LM2902VDTB replacement LM2902VDTB cross reference LM2902VDTB vs LM2902DTB LM2902VDTB footprint LM2902VDTB application circuit onsemi LM2902VDTB LM2902VDTB price LM2902VDTB stock

Related Components & Terms

onsemi LM2902VDTB LM2902VDTBR2G LM2902VDTBR2 LM2902DTB LM2902VDTBG operational amplifier op amp quad operational amplifier general-purpose amplifier amplifier IC analog IC semiconductor true differential input single-supply operation low-power operation TSSOP-14 TSSOP package family surface mount SMD 3 V to 26 V operating voltage signal conditioning current-sense amplifier threshold detection industrial instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details