LM358DGKRG4 - Dual 700kHz Op Amp, 8-VSSOP | Texas Instruments
MPN: LM358DGKRG4 ✓ ActiveLM358DGKRG4 Overview
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM358 belongs to the broader operational-amplifier, linear-amplifier, and semiconductor hierarchy. Two amplifiers are integrated into one package, allowing one IC to support signal buffering, amplification, filtering, comparisons, and feedback-control functions while reducing board area and component count.
The LM358 family provides differential inputs, high open-loop gain, frequency compensation, and the ability to operate from a single supply or split supply. Each amplifier in the LM358DGKRG4 is configured for general-purpose use rather than rail-to-rail input and output operation. The verified product description identifies the part as a 2-circuit amplifier in an 8-VSSOP package, while the manufacturer nomenclature identifies it as a 700 kHz device.
The eight-terminal surface-mount package makes the device suitable for compact analog boards, but layout still requires care around feedback components and supply connections. Pin 8 is the positive supply, pin 4 is the negative supply or ground reference, and the remaining pins divide into two independent amplifier sections. Because the LM358 is a frequency-compensated operational-amplifier family, external stability networks are generally unnecessary for ordinary closed-loop uses.
Typical applications include low-level sensor conditioning, current-loop receivers, audio preamplifier stages, active filters, comparators, feedback-control loops, and general-purpose analog signal processing. The two independent channels can be used simultaneously when channel requirements are similar, or one channel can remain unused when its input and output are properly configured.
When designing around the LM358DGKRG4, verify the input common-mode range and output swing against the actual supply voltage. Place bypass capacitance close to the supply pins, keep feedback-loop routing compact, and avoid long parallel traces between the input and output networks. The commercial temperature grade should be checked against the intended ambient operating range.
This product record consolidates the verified manufacturer and distributor identification, package information, drop-in candidate analysis, pin assignment, comparison parameters, and practical layout guidance. It is structured to support engineering selection for the LM358DGKRG4 and to distinguish confirmed drop-in options from candidates requiring additional qualification.
Drop-in alternatives for LM358DGKRG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with LM358DGKRG4 (same form factor and footprint) — differing in Package, Amplifier Type.
LM358DGKR
✅ Drop-InContact for price
View Datasheet →LM358DGKRG
✅ Drop-In📋 Reference alternative (not in catalog)
LM358DG4
✅ Drop-InContact for price
View Datasheet →LM358DGKRG4 Maximum Ratings & Electrical Characteristics
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| Gain-Bandwidth Product | 700 kHz |
| Package | 8-VSSOP |
| Terminal Count | 8 terminals |
| Terminal Form | Gull wing |
| Mounting Type | Surface mount |
| Temperature Grade | Commercial |
| RoHS Status | Compliant |
LM358DGKRG4 Pin Configuration
| Pin 1 | OUTA — Amplifier A output |
| Pin 2 | INA− — Inverting input for amplifier A |
| Pin 3 | INA+ — Non-inverting input for amplifier A |
| Pin 4 | V− — Negative supply or ground reference |
| Pin 5 | INB+ — Non-inverting input for amplifier B |
| Pin 6 | INB− — Inverting input for amplifier B |
| Pin 7 | OUTB — Amplifier B output |
| Pin 8 | V+ — Positive supply |
Typical Applications
LM358DGKRG4 is suitable for 6 applications: Low-Level Sensor Signal Conditioning, Audio Preamplifier and Buffering, Current-Loop Signal Conditioning, Active Filters and Control Loops, Threshold Detection and Comparator-Style Circuits, Portable Analog Control Module.
Low-Level Sensor Signal Conditioning
LM358DGKRG4 is suitable for conditioning weak sensor signals where two general-purpose amplifier channels can be used for amplification and buffering. Its 700 kHz gain-bandwidth product provides useful bandwidth for common temperature, pressure, and position sensors, while the 8-VSSOP package limits board area. The design should confirm that the sensor output lies within the input common-mode range and that the selected closed-loop gain remains stable. Decoupling near pin 8 and a clean ground return to pin 4 help maintain predictable analog performance.
Recommended
Audio Preamplifier and Buffering
The two amplifier channels in LM358DGKRG4 can support small-signal audio preamplification, active filtering, or line-level buffering. Its 700 kHz gain-bandwidth product is appropriate for many voice-band and general audio paths, although it is not intended for high-frequency precision audio. Verify output swing against the selected supply voltage and maintain short feedback traces to reduce oscillation risk. A suitable input coupling network and output filtering should be designed around the source impedance and desired lower cutoff frequency.
Recommended
Current-Loop Signal Conditioning
LM358DGKRG4 can receive the voltage generated by a current-to-voltage converter or sensor current loop when the loop output remains within the amplifier’s common-mode range. One channel may provide signal conditioning and the other may serve as an auxiliary buffer or active filter. Because the 700 kHz device is intended for general-purpose rather than precision instrumentation, gain and offset errors should be included in the system error budget. Place input protection and filtering close to the connector while keeping the amplifier feedback loop compact.
Recommended
Active Filters and Control Loops
The two internal channels of LM358DGKRG4 make it practical to implement a first-order active filter followed by a buffer, gain stage, or error amplifier. Its 700 kHz gain-bandwidth product provides ample bandwidth for low-frequency process-control and instrumentation loops, while the integrated frequency compensation supports conventional closed-loop operation. Select external resistor and capacitor values with the gain-bandwidth and output-swing limits in mind. Keep sensitive summing nodes away from high-current supply paths and place the timing components close to the relevant input pins.
Recommended
Threshold Detection and Comparator-Style Circuits
LM358DGKRG4 can perform threshold detection when the input signal is compared with a reference and the resulting output is used as a logic-level indication. The device includes two amplifier channels, allowing independent comparisons or a threshold detector combined with an output-conditioning stage. The designer must verify that the output voltage reaches the downstream logic threshold under the chosen supply and load conditions. Input offset voltage and output saturation behavior should be included in the noise-margin analysis.
Recommended
Portable Analog Control Module
The 8-VSSOP LM358DGKRG4 is useful in compact control modules that combine sensing, filtering, and feedback conditioning around a microcontroller or controller. Its two channels can reduce the number of separate analog ICs, while the surface-mount package supports automated assembly. A single-supply configuration can simplify system wiring, but the signal must remain inside the common-mode range. Provide local supply bypassing, maintain a low-impedance ground connection, and validate startup behavior if the analog section must operate before the controller becomes active.
Recommended
Recommended Products Summary
Engineering reference data for LM358DGKRG4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LM358DGKR | LM358DGKRG | LM358DG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | HANSCHIP semiconductor | Texas Instruments |
| Package | 8-VSSOP | 8-TSSOP | 8-TSSOP | 8-TSSOP |
| Amplifier Channels | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 700 kHz | 700 kHz | 700 kHz | 700 kHz |
| Product Class | Standard general-purpose amplifier | Dual general-purpose operational amplifier | Dual general-purpose operational amplifier | Industry-standard dual operational amplifier |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Supply Configuration | Single supply or split supply | Single supply or split supply | Single supply or split supply | Single supply or split supply |
Key Differentiators
- Exact commercial-grade Texas Instruments ordering option (vs LM358DGKR)
- Dual general-purpose channels in a compact surface-mount package (vs LM358DGKRG)
- Verified RoHS-compliant, lead-free construction (vs LM358DGKRG)
Design Notes
Place the supply bypass capacitor close to pin 8 and provide a short, low-impedance return from pin 4 to the circuit ground plane. Route the two amplifier channels separately where possible to prevent feedback from one channel through shared supply impedance. Keep high-impedance input traces away from switching nodes and output traces; the compact 8-VSSOP footprint limits the available routing space.
Do not assume rail-to-rail input or output operation. Confirm that the source voltage stays within the input common-mode range and that the required output level can be reached under the actual load. The common-mode range also changes with supply voltage, so single-supply operation may require biasing the signal around mid-supply. Review saturation recovery behavior before using the device as a fast comparator.
Keep each closed-loop feedback network compact and connect the feedback capacitor directly to the inverting input and output. Place input filtering capacitors at the source rather than beside the amplifier when a long trace would add instability or coupling. For sensor sources with substantial impedance, calculate the maximum capacitive load and noise-gain bandwidth before adding additional capacitance at the input.
Use the same supply rails for both amplifier channels unless the design intentionally assigns different signals to each channel. Verify startup and shutdown behavior with external circuitry because a single-supply LM358 may require the input and output to settle before becoming useful. Add reverse-input or transient protection when the source can exceed the supply rails during system startup or fault conditions.
Compliance Information
The exact LM358DGKRG4 is identified as RoHS-compliant and lead-free. The commercial-grade ordering code is not identified as AEC-Q100 qualified.