LT1630IS8 - Dual 30MHz Precision Op Amp | Analog Devices
MPN: LT1630IS8 ✓ ActiveLT1630IS8 Overview
An operational amplifier is an amplifier IC whose high open-loop gain is applied through negative feedback to create accurate, stable gain. Within the power-management and signal-processing hierarchy, the LT1630 combines precision DC behavior with high-speed AC performance. Its rail-to-rail inputs accept signals near either supply rail, while rail-to-rail outputs support low-voltage systems in which useful signal swing must extend close to the supply limits.
The LT1630 family is offered in dual and quad configurations, with the LT1630 providing two channels and the LT1631 providing four channels. According to the Analog Devices manufacturer datasheet, these devices can serve as plug-in replacements for many standard op amps when a wider input or output range and improved performance are needed. The dual LT1630 uses the standard dual-op-amp pinout in the 8-pin PDIP and SO packages.
The principal performance characteristics are a 30 MHz gain-bandwidth product and 10 V/µs slew rate. These values allow the amplifier to handle higher-frequency signals than a conventional precision op amp while retaining low-offset behavior described by Analog Devices for the LT1630/LT1631 family. Two channels in one package also reduce component count and board area in instrumentation and multi-channel signal-processing designs.
Typical uses include low-level sensor amplification, active filtering, analog signal conditioning, data-acquisition front ends, audio and communication circuitry, and general-purpose buffering. The SOIC-8 format supports conventional surface-mount assembly, while rail-to-rail operation makes the device appropriate for low-voltage systems in which signal headroom is limited. The dual channel count is especially useful when two related signals must be amplified with consistent device characteristics.
The primary design consideration is the trade-off between speed, precision, noise, and stability. High-bandwidth operational amplifiers can require careful compensation and layout around capacitive loads, so feedback-loop component placement and output isolation should follow the manufacturer guidance. Input and output voltage limits, load behavior, supply headroom, and the applicable temperature grade should also be checked against the exact operating conditions before production release.
This product page combines the verified LT1630 family performance, package information, commercial sourcing path, and engineering-focused replacement guidance. It also identifies the available same-footprint alternatives while clearly separating genuine drop-in options from cross-reference tools that only provide general similarity searches.
Drop-in alternatives for LT1630IS8 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
LT1630HS8#PBF
✅ Drop-In📋 Reference alternative (not in catalog)
LT1630CS8#PBF
✅ Drop-In📋 Reference alternative (not in catalog)
LT1630IS8#PBF
✅ Drop-In📋 Reference alternative (not in catalog)
LT1630IS8 Maximum Ratings & Electrical Characteristics
| Amplifier Type | General Purpose Precision Operational Amplifier |
| Number of Circuits | 2 circuits |
| Gain-Bandwidth Product | 30 MHz |
| Slew Rate | 10 V/µs |
| Input Type | Rail-to-Rail |
| Output Type | Rail-to-Rail |
| Package | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Mounting Type | Surface Mount |
| Number of Pins | 8 pins |
| Delivery Packaging | Tube |
| RoHS Status | Compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (Unlimited) |
LT1630IS8 8-soic, 0.154 inch body width, 3.90 mm width Pin Configuration Guide
Pin configuration for LT1630IS8 (8-soic, 0.154 inch body width, 3.90 mm width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for LT1630IS8.
Refer to the datasheet for full pin configuration.
Typical Applications
LT1630IS8 is suitable for 6 applications: Precision Instrumentation, Active Filtering, Data Acquisition, Audio Signal Conditioning, Sensor Signal Buffering, Communication Interfaces.
Precision Instrumentation
The LT1630IS8 fits instrumentation front ends that must amplify low-level sensor signals while operating close to the available supply rails. Its rail-to-rail input stage reduces common-mode range restrictions, and the 30 MHz gain-bandwidth product provides useful bandwidth for signals beyond the slow range of many precision op amps. Two amplifiers in one 8-SOIC package allow a channel to handle the sensor signal while the second performs gain, filtering, or reference-buffer functions. The 10 V/µs slew rate also allows larger-amplitude signals to transition rapidly, although stable feedback-network layout remains important in precision signal paths.
Active Filtering
The LT1630IS8 is suitable for active filter stages requiring both precision DC behavior and a bandwidth above ordinary general-purpose op amps. A 30 MHz gain-bandwidth product gives the designer additional loop-gain margin when implementing low-pass, high-pass, or band-pass networks around the amplifier's operating frequency. Rail-to-rail output operation is valuable in low-voltage systems because it can preserve more usable signal excursion than a non-rail-to-rail output stage. Component tolerances, feedback noise, and capacitive loading must be evaluated together to preserve filter accuracy and prevent unintended oscillation.
Data Acquisition
The dual LT1630IS8 can condition two acquisition channels in a compact 8-SOIC footprint. Rail-to-rail inputs help accept signals spanning much of the converter input range, while the 30 MHz gain-bandwidth product can preserve useful dynamic response when the closed-loop gain is not excessively high. The second channel can serve as an active filter, buffer, or reference-conditioning amplifier. Designers should account for amplifier offset, bias-current effects, noise, and settling time at the selected gain, and should place sensitive input nodes away from switching and digital return currents on the PCB.
Audio Signal Conditioning
The LT1630IS8 can be used in low-level audio and communication circuits where the input may approach either supply rail. Its rail-to-rail input and output behavior increases usable signal headroom in low-voltage analog sections, while the 10 V/µs slew rate supports clearer reproduction of larger-amplitude transitions than a slower comparator-style device. The dual configuration is useful for stereo or balanced signal paths. Stable operation with the chosen feedback network and output load must be confirmed, and the amplifier should not be used outside the manufacturer-specified supply and common-mode limits.
Sensor Signal Buffering
The LT1630IS8 is well suited to buffering sensors that produce signals close to ground or the positive supply, where a fixed common-mode input range would increase distortion or clip the signal. Rail-to-rail input operation reduces that limitation, and the 30 MHz gain-bandwidth product can preserve fast sensor transitions. A unity-gain or low-gain buffer configuration can provide isolation between a high-impedance sensor and subsequent circuitry. Input bias current, offset voltage, capacitive loading, and sensor output impedance must be included in the error analysis because a wide bandwidth alone does not guarantee accurate DC behavior.
Communication Interfaces
The LT1630IS8 can support low-level receive and transmit signal-conditioning paths in communication equipment. Its 30 MHz gain-bandwidth product and 10 V/µs slew rate provide useful headroom for moderate-bandwidth analog stages, while the dual-channel package can implement balanced signal handling. Rail-to-rail inputs and outputs are particularly helpful when the system operates from a low-voltage rail and the signal must move across much of the available range. The design should preserve the device's common-mode and output-swing limits and use controlled impedance routing for any high-speed signals near the amplifier.
Engineering reference data for LT1630IS8 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LT1630HS8#PBF | LT1630CS8#PBF | LT1630IS8#PBF |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Amplifier Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 30 MHz | 30 MHz | 30 MHz | 30 MHz |
| Input Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
| Output Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| Temperature-Grade Suffix | IS8 | HS8 | CS8 | IS8 |
| Lead-Free Ordering Suffix | Target MPN does not include the listed #PBF suffix | #PBF | #PBF | #PBF |
Key Differentiators
- Combines precision and high-speed performance in two channels (vs LT1630CS8#PBF)
- Closely matched same-footprint HS8 option (vs LT1630HS8#PBF)
- Rail-to-rail input and output in a standard 8-SOIC footprint (vs LT1630IS8#PBF)
Design Notes
Use the standard dual-op-amp pin configuration shown in the manufacturer datasheet when assigning PCB tracks. Keep each feedback resistor, compensation component, and input node close to its associated amplifier pins to minimize parasitic capacitance and feedback-loop length. Separate sensitive inputs from digital return paths, and provide a quiet ground reference for both channels.
The 30 MHz gain-bandwidth product and 10 V/µs slew rate make loop stability and capacitive-load handling important design checks. Simulate the final feedback network with the intended load, connector, and cable capacitance. If the required load cannot be driven directly, isolate the amplifier output with a small series resistor or buffer stage instead of adding large capacitors at the output pin.
Do not assume that rail-to-rail input and output operation removes all supply-voltage restrictions. Check the exact manufacturer's operating range, common-mode limits, output-swing behavior, and grade-specific temperature limits for the selected suffix. Keep the output within its linear range, account for input and output bias-current error, and avoid using the 10 V/µs slew-rate figure as a guaranteed large-signal bandwidth specification.
Compliance Information
The verified component analysis identifies RoHS compliance, REACH unaffected status, and MSL 1 (Unlimited). The listed #PBF ordering variants identify lead-free construction.