Analog Devices

LT1630IS8 - Dual 30MHz Precision Op Amp | Analog Devices

MPN: LT1630IS8 ✓ 啟用中
8-SOIC, 0.154 inch body width, 3.90 mm width Package
MOQ: 1 |

LT1630IS8 概覽

Analog Devices LT1630IS8 is a dual general-purpose precision operational amplifier with a 30 MHz gain-bandwidth product, a 10 V/µs slew rate, and rail-to-rail input and output operation. The device is supplied in an 8-pin SOIC package and provides two amplifier channels, making it suitable for instrumentation, buffer, filter, and signal-conditioning circuits that require a wide input and output range.

An operational amplifier is an amplifier IC whose high open-loop gain is applied through negative feedback to create accurate, stable gain. Within the power-management and signal-processing hierarchy, the LT1630 combines precision DC behavior with high-speed AC performance. Its rail-to-rail inputs accept signals near either supply rail, while rail-to-rail outputs support low-voltage systems in which useful signal swing must extend close to the supply limits.

The LT1630 family is offered in dual and quad configurations, with the LT1630 providing two channels and the LT1631 providing four channels. According to the Analog Devices manufacturer datasheet, these devices can serve as plug-in replacements for many standard op amps when a wider input or output range and improved performance are needed. The dual LT1630 uses the standard dual-op-amp pinout in the 8-pin PDIP and SO packages.

The principal performance characteristics are a 30 MHz gain-bandwidth product and 10 V/µs slew rate. These values allow the amplifier to handle higher-frequency signals than a conventional precision op amp while retaining low-offset behavior described by Analog Devices for the LT1630/LT1631 family. Two channels in one package also reduce component count and board area in instrumentation and multi-channel signal-processing designs.

Typical uses include low-level sensor amplification, active filtering, analog signal conditioning, data-acquisition front ends, audio and communication circuitry, and general-purpose buffering. The SOIC-8 format supports conventional surface-mount assembly, while rail-to-rail operation makes the device appropriate for low-voltage systems in which signal headroom is limited. The dual channel count is especially useful when two related signals must be amplified with consistent device characteristics.

The primary design consideration is the trade-off between speed, precision, noise, and stability. High-bandwidth operational amplifiers can require careful compensation and layout around capacitive loads, so feedback-loop component placement and output isolation should follow the manufacturer guidance. Input and output voltage limits, load behavior, supply headroom, and the applicable temperature grade should also be checked against the exact operating conditions before production release.

This product page combines the verified LT1630 family performance, package information, commercial sourcing path, and engineering-focused replacement guidance. It also identifies the available same-footprint alternatives while clearly separating genuine drop-in options from cross-reference tools that only provide general similarity searches.

直接替換替代品,適用於 LT1630IS8 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

LT1630HS8#PBF

✅ 直接替換
📦 8-SOIC
Same 8-SOIC dual package and reported identical primary performance; temperature-grade suffix differs

📋 參考替代品(不在目錄中)

LT1630CS8#PBF

✅ 直接替換
📦 8-SOIC
Same 8-SOIC dual package, 2 circuits, and 30 MHz class; grade-specific limits differ

📋 參考替代品(不在目錄中)

LT1630IS8#PBF

✅ 直接替換
📦 8-SOIC
Same LT1630IS8 base device with the explicitly listed lead-free ordering suffix

📋 參考替代品(不在目錄中)

LT1630IS8 最大額定值與電氣特性

Amplifier Type General Purpose Precision Operational Amplifier
Number of Circuits 2 circuits
Gain-Bandwidth Product 30 MHz
Slew Rate 10 V/µs
Input Type Rail-to-Rail
輸出類型 Rail-to-Rail
封裝 8-SOIC, 0.154 inch body width, 3.90 mm width
安裝類型 Surface Mount
腳位數 8 pins
Delivery Packaging Tube
RoHS 狀態 Compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1 (Unlimited)

LT1630IS8 8-soic, 0.154 inch body width, 3.90 mm width 腳位配置指南

LT1630IS8(8-soic, 0.154 inch body width, 3.90 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LT1630IS8 的 8-soic, 0.154 inch body width, 3.90 mm width 封裝腳位圖

無詳細腳位定義資料: LT1630IS8.

請參閱 資料表 以查看完整腳位配置。

典型應用

LT1630IS8 適用於 6 應用s: Precision Instrumentation, Active Filtering, Data Acquisition, Audio Signal Conditioning, Sensor Signal Buffering, Communication Interfaces.

📊

Precision Instrumentation

The LT1630IS8 fits instrumentation front ends that must amplify low-level sensor signals while operating close to the available supply rails. Its rail-to-rail input stage reduces common-mode range restrictions, and the 30 MHz gain-bandwidth product provides useful bandwidth for signals beyond the slow range of many precision op amps. Two amplifiers in one 8-SOIC package allow a channel to handle the sensor signal while the second performs gain, filtering, or reference-buffer functions. The 10 V/µs slew rate also allows larger-amplitude signals to transition rapidly, although stable feedback-network layout remains important in precision signal paths.

🔧

Active Filtering

The LT1630IS8 is suitable for active filter stages requiring both precision DC behavior and a bandwidth above ordinary general-purpose op amps. A 30 MHz gain-bandwidth product gives the designer additional loop-gain margin when implementing low-pass, high-pass, or band-pass networks around the amplifier's operating frequency. Rail-to-rail output operation is valuable in low-voltage systems because it can preserve more usable signal excursion than a non-rail-to-rail output stage. Component tolerances, feedback noise, and capacitive loading must be evaluated together to preserve filter accuracy and prevent unintended oscillation.

🖥️

Data Acquisition

The dual LT1630IS8 can condition two acquisition channels in a compact 8-SOIC footprint. Rail-to-rail inputs help accept signals spanning much of the converter input range, while the 30 MHz gain-bandwidth product can preserve useful dynamic response when the closed-loop gain is not excessively high. The second channel can serve as an active filter, buffer, or reference-conditioning amplifier. Designers should account for amplifier offset, bias-current effects, noise, and settling time at the selected gain, and should place sensitive input nodes away from switching and digital return currents on the PCB.

🎧

Audio Signal Conditioning

The LT1630IS8 can be used in low-level audio and communication circuits where the input may approach either supply rail. Its rail-to-rail input and output behavior increases usable signal headroom in low-voltage analog sections, while the 10 V/µs slew rate supports clearer reproduction of larger-amplitude transitions than a slower comparator-style device. The dual configuration is useful for stereo or balanced signal paths. Stable operation with the chosen feedback network and output load must be confirmed, and the amplifier should not be used outside the manufacturer-specified supply and common-mode limits.

🧩

Sensor Signal Buffering

The LT1630IS8 is well suited to buffering sensors that produce signals close to ground or the positive supply, where a fixed common-mode input range would increase distortion or clip the signal. Rail-to-rail input operation reduces that limitation, and the 30 MHz gain-bandwidth product can preserve fast sensor transitions. A unity-gain or low-gain buffer configuration can provide isolation between a high-impedance sensor and subsequent circuitry. Input bias current, offset voltage, capacitive loading, and sensor output impedance must be included in the error analysis because a wide bandwidth alone does not guarantee accurate DC behavior.

🔧

Communication Interfaces

The LT1630IS8 can support low-level receive and transmit signal-conditioning paths in communication equipment. Its 30 MHz gain-bandwidth product and 10 V/µs slew rate provide useful headroom for moderate-bandwidth analog stages, while the dual-channel package can implement balanced signal handling. Rail-to-rail inputs and outputs are particularly helpful when the system operates from a low-voltage rail and the signal must move across much of the available range. The design should preserve the device's common-mode and output-swing limits and use controlled impedance routing for any high-speed signals near the amplifier.

What is the LT1630IS8?
The LT1630IS8 is a dual rail-to-rail input and output precision operational amplifier from Analog Devices. According to the manufacturer datasheet, it provides two amplifier circuits, a 30 MHz gain-bandwidth product, and a 10 V/µs slew rate in an 8-pin SOIC package. It is intended for instrumentation and general-purpose signal-conditioning applications that need both precision and relatively high bandwidth.
What are the key specifications of LT1630IS8 that engineers should know?
The LT1630IS8 combines two amplifier channels, rail-to-rail input and output operation, a 30 MHz gain-bandwidth product, and a 10 V/µs slew rate in an 8-pin SOIC package. According to the Analog Devices manufacturer datasheet, the LT1630 uses the standard dual-op-amp pinout. These characteristics make it useful for low-level instrumentation, filtering, buffering, and other circuits requiring low-voltage signal headroom.
What is the gain-bandwidth product and slew rate of LT1630IS8?
The LT1630IS8 has a 30 MHz gain-bandwidth product and a 10 V/µs slew rate. These figures come directly from the Analog Devices manufacturer datasheet and distinguish the LT1630 from slower general-purpose precision amplifiers. The available bandwidth supports higher-frequency closed-loop signal paths, while the slew rate governs large-signal transition performance.
Is LT1630IS8 a dual or quad operational amplifier?
The LT1630IS8 is a dual operational amplifier with two amplifier circuits in one 8-pin SOIC package. Analog Devices describes the LT1630 as the dual member of the LT1630/LT1631 family, while the LT1631 is the quad member in a 14-pin package. The LT1630 is suitable when two channels can share the same package and operating conditions.
Where can I download the LT1630IS8 datasheet PDF?
The official LT1630IS8 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/16301fa.pdf. The document covers the LT1630/LT1631 dual and quad precision op amps, including their 30 MHz gain-bandwidth product, 10 V/µs slew rate, rail-to-rail input and output characteristics, and standard dual-op-amp pinout.
Where can I find the LT1630IS8 pinout?
The LT1630IS8 pinout is shown in the pin-configuration section of the official Analog Devices manufacturer datasheet. The datasheet states that the LT1630 is available in 8-pin PDIP and SO packages with the standard dual op amp pinout. Use that drawing to assign the amplifier inputs, outputs, supply pins, and no-connect positions on the PCB.
Where can I buy LT1630IS8 online?
Use the Request a Quote form on this page to request LT1630IS8 pricing, availability, and lead time from XAIPART. The part is identified as an 8-SO, dual, rail-to-rail general-purpose amplifier, and the Analog Devices product page lists the LT1630 family as production. The quote form provides the appropriate commercial response without relying on a static price.
What is the price of LT1630IS8?
Use the Request a Quote form on this page for the current LT1630IS8 price. Pricing can depend on order quantity, lead time, and supply conditions, so a fixed quotation is more useful than an outdated historical figure. The request form on this page provides the current commercial response for the exact LT1630IS8 device and its 8-SOIC configuration.
What is the lead time for LT1630IS8?
Request the current LT1630IS8 lead time through the Request a Quote form on this page. The Analog Devices product page identifies the LT1630 family as production, while exact delivery timing depends on order quantity and inventory. Supply the required quantity, target shipment location, and production schedule when submitting the request.
Is LT1630IS8 in stock?
Current LT1630IS8 stock should be confirmed through the Request a Quote form on this page. The manufacturer lists the LT1630 family as production, but that lifecycle statement does not by itself confirm local inventory for every order quantity. A quote request allows XAIPART to check the current supply position for the exact 8-SOIC device.
LT1630IS8 vs LT1630HS8#PBF - which is better?
The LT1630HS8#PBF is a strong alternative when its available temperature grade suits the design. According to the manufacturer datasheet, the LT1630 family provides rail-to-rail input and output, a 30 MHz gain-bandwidth product, and a 10 V/µs slew rate, while the comparison data reports identical primary performance profiles for the HS8 and IS8 versions. Confirm the grade-specific operating limits before replacement.
What is the difference between LT1630IS8 and LT1630CS8#PBF?
The LT1630CS8#PBF and LT1630IS8 are both dual, 8-pin SO rail-to-rail operational amplifiers. The verified comparison identifies matching package, pin count, and circuit count, while the grade suffix indicates different ordering variants. The important selection criterion is the manufacturer-specified temperature grade and operating limits for the exact suffix, not a change in basic package geometry.
When should I choose LT1630IS8 over LT1630HS8#PBF?
Choose LT1630IS8 when its grade-specific operating limits match the ambient-temperature and reliability requirements of the target application. The LT1630HS8#PBF offers a closely related dual SOIC option, and comparison information reports no measurable difference in the primary technical parameters. The final choice should follow the exact temperature grade, supply status, and qualification requirements.
Is LT1630CS8#PBF suitable as a drop-in replacement for LT1630IS8?
The LT1630CS8#PBF is a drop-in candidate for LT1630IS8 because both use an 8-pin SO package with two amplifier circuits and the same standard dual-op-amp footprint. Verified comparison data identifies matching package and terminal arrangement. Before substitution, verify the exact suffix-specific temperature limits, supply-voltage range, offset characteristics, and lifecycle status.
What is the best drop-in replacement for LT1630IS8?
The LT1630HS8#PBF is the closest documented same-package replacement because it retains the 8-SO dual configuration and is reported to have an identical primary performance profile. The LT1630CS8#PBF is another same-footprint option. Both should be treated as qualified alternates only after checking manufacturer grade limits and application-specific offset, noise, stability, and supply requirements.

工程參考資料,適用於 LT1630IS8 — 比較、設計指引及合規資訊。

選型指南

Choose the LT1630IS8 for low-voltage, dual-channel signal paths that need rail-to-rail input and output operation together with a 30 MHz gain-bandwidth product and 10 V/µs slew rate. It is particularly suitable for instrumentation, active filters, sensor buffering, and acquisition circuitry where two matched functions can share an 8-SOIC package. The LT1630HS8#PBF is a compelling alternative when its manufacturer-defined temperature grade is appropriate, because comparison information reports identical primary technical performance and the same footprint. The LT1630CS8#PBF also retains the 8-SOIC, dual-circuit pin arrangement and is a practical same-board option when its suffix-specific operating limits meet the application. Verify exact supply range, offset, bias-current, temperature, stability, and lifecycle requirements for the selected ordering code before substitution.

與替代品比較

參數 本產品 LT1630HS8#PBF LT1630CS8#PBF LT1630IS8#PBF
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Number of Amplifier Circuits 2 circuits 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 30 MHz 30 MHz 30 MHz 30 MHz
Input Type Rail-to-Rail Rail-to-Rail Rail-to-Rail Rail-to-Rail
Output Type Rail-to-Rail Rail-to-Rail Rail-to-Rail Rail-to-Rail
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount
Temperature-Grade Suffix IS8 HS8 CS8 IS8
Lead-Free Ordering Suffix Target MPN does not include the listed #PBF suffix #PBF #PBF #PBF

主要差異化特點

  • Combines precision and high-speed performance in two channels (對比LT1630CS8#PBF)
  • Closely matched same-footprint HS8 option (對比LT1630HS8#PBF)
  • Rail-to-rail input and output in a standard 8-SOIC footprint (對比LT1630IS8#PBF)

設計說明

Use the standard dual-op-amp pin configuration shown in the manufacturer datasheet when assigning PCB tracks. Keep each feedback resistor, compensation component, and input node close to its associated amplifier pins to minimize parasitic capacitance and feedback-loop length. Separate sensitive inputs from digital return paths, and provide a quiet ground reference for both channels.

The 30 MHz gain-bandwidth product and 10 V/µs slew rate make loop stability and capacitive-load handling important design checks. Simulate the final feedback network with the intended load, connector, and cable capacitance. If the required load cannot be driven directly, isolate the amplifier output with a small series resistor or buffer stage instead of adding large capacitors at the output pin.

Do not assume that rail-to-rail input and output operation removes all supply-voltage restrictions. Check the exact manufacturer's operating range, common-mode limits, output-swing behavior, and grade-specific temperature limits for the selected suffix. Keep the output within its linear range, account for input and output bias-current error, and avoid using the 10 V/µs slew-rate figure as a guaranteed large-signal bandwidth specification.

合規資訊

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Unknown

The verified component analysis identifies RoHS compliance, REACH unaffected status, and MSL 1 (Unlimited). The listed #PBF ordering variants identify lead-free construction.

相關搜尋

LT1630IS8 datasheet LT1630IS8 pinout LT1630IS8 datasheet pdf LT1630IS8 equivalent LT1630IS8 replacement LT1630IS8 cross reference LT1630IS8 price LT1630IS8 stock Analog Devices LT1630IS8 LT1630IS8 vs LT1630HS8#PBF LT1630IS8 30MHz 10V/us LT1630IS8 8-SOIC amplifier LT1630IS8 precision instrumentation LT1630IS8 active filter

相關元件與詞彙

Analog Devices Linear Technology LT1630IS8 LT1630IS8#PBF LT1630HS8#PBF LT1630CS8#PBF LT1630 LT1631 Operational Amplifier Precision Operational Amplifier Dual Amplifier Rail-to-Rail Input Rail-to-Rail Output Gain-Bandwidth Product Slew Rate Signal Conditioning Active Filter Instrumentation Data Acquisition Sensor Buffer 8-SOIC SOIC Family Surface Mount RoHS REACH
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情