Maxim Integrated

MAX232AESE+ - Dual RS-232 Transceiver in SOIC-16 | Maxim

MPN: MAX232AESE+ ✓ Active
4.5 V to 5.5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX232AESE+ Overview

The Maxim Integrated MAX232AESE+ is a +5 V-powered RS-232 driver/receiver IC with two drivers and two receivers in a 16-pin SOIC package. Its 4.5 V to 5.5 V supply range, dual-channel signal-path arrangement, and 3.90 mm-wide SOIC-16 package make it suitable for conventional serial-interface equipment.

An RS-232 transceiver is an interface IC that combines line drivers and receivers for bidirectional serial communication. The MAX220 through MAX249 family is designed for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly systems in which approximately ±12 V is unavailable. The MAX232AESE+ implements this interface function with a single +5 V supply while providing separate transmit and receive channels.

The device includes two RS-232 drivers and two receivers, giving the system two driver channels and two receiver channels in one package. Its specified 4.5 V to 5.5 V operating-supply range supports regulated 5 V system rails. A 16-SOIC package allows use of familiar PCB routing and assembly practices, while its 3.90 mm package width fits standard narrow-body SOIC board layouts.

The MAX232A family is part of Maxim Integrated's +5 V-powered multichannel RS-232 portfolio. A single IC can support two transmit paths and two receive paths, reducing the number of separate interface components required in multi-channel equipment. The product description identifies the MAX232A device family as production and associates the MAX232A with +5 V-powered multichannel RS-232 drivers and receivers.

Typical uses include service-console connections, configuration interfaces, industrial-control links, test equipment, and embedded systems that require a wired RS-232 port. In these applications, the two transmitter channels can carry command or data signals, while the two receiver channels can accept responses or status information. The same IC can also be used where only one direction of communication is required, leaving additional channels available for future expansion or control signals.

When laying out a board around the MAX232AESE+, place charge-pump support capacitors and interface-network components close to their associated pins, and keep the RS-232 connector-side traces away from sensitive analog and digital timing circuitry. Confirm the external capacitor values, line-driver load assumptions, and protection requirements against the manufacturer datasheet before releasing the PCB layout.

This page combines the manufacturer product information, distributor package and availability details, cross-reference findings, a parameter comparison, and practical interface-design guidance. It is intended to accelerate component identification and replacement planning while preserving the distinction between a verified pin-compatible substitute and a merely functional alternative.

Drop-in alternatives for MAX232AESE+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX232AESE+ (same form factor and footprint) — differing in Product Type, Interface Standard, Package, Maximum Data Rate, Transceiver Configuration.

Analog Devices
Interface Standard: RS-232
Package: 16-pin SOIC
Maximum Data Rate: 200 kb/s
Compare with MAX232AESE+ →
Analog Devices
Product Type: Dual RS-232 driver and receiver
Interface Standard: TIA/EIA-232-F
Package: 16-pin SOIC, 0.154 in (3.90 mm) width
Compare with MAX232AESE+ →
Analog Devices
Product Type: RS-232 transceiver
Interface Standard: RS-232
Package: 16-pin SOIC
Compare with MAX232AESE+ →
Analog Devices
Product Type: Dual RS-232 Transceiver
Package: 16-SOIC narrow
Transceiver Configuration: 2/2 Full RS-232
Compare with MAX232AESE+ →
Analog Devices
Product Type: Dual RS-232 transceiver with integrated charge pump
Interface Standard: EIA/TIA-232E and CCITT V.28
Package: 16-pin narrow SOIC
Compare with MAX232AESE+ →
Maxim Integrated
Product Type: Dual RS-232 line driver and receiver transceiver
Interface Standard: EIA/TIA-232E
Maximum Data Rate: 120 kbps
Compare with MAX232AESE+ →

MAX232ESE+

✅ Drop-In ⚠️ Specs Unverified
Maxim Integrated
📦 16-SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

Contact for price

View Datasheet →

MAX232CSE+

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 16-SOIC
Dual RS-232 Transceiver · EIA/TIA-232E, V.28, V.24 · 4.5 V to 5.5 V · 2 · 2 · 2/2 Full RS-232 · 16-SOIC narrow · 16 pins

Contact for price

View Datasheet →

MAX232EESE+

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Contact for price

View Datasheet →

MAX232AEWE

✅ Drop-In ⚠️ Specs Unverified
📦 16-SOIC
Driver and receiver counts differ by 0 and supply-voltage range differs by 0 V; the ordering suffix and temperature grade must be checked

📋 Reference alternative (not in catalog)

MAX232AESE+T

✅ Drop-In ⚠️ Specs Unverified
📦 16-SOIC
Driver and receiver counts differ by 0 and supply-voltage range differs by 0 V; slew-rate grade and temperature suffix require verification

📋 Reference alternative (not in catalog)

MAX232AESE+ Specifications

Product Type RS-232 dual transceiver
Driver Count 2 drivers
Receiver Count 2 receivers
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply +5 V
Interface Standard EIA/TIA-232E, V.28, V.24
Transceiver Configuration 2/2 full-duplex RS-232
Technology Enhanced CMOS
Package 16-SOIC
Package Width 3.90 mm
Pin Count 16 pins
Mounting Type Surface mount

MAX232AESE+ 3.90 mm Pin Configuration Guide

Pin configuration for MAX232AESE+ (3.90 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

3.90 mm package pinout diagram for MAX232AESE+

No detailed pinout data available for MAX232AESE+.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX232AESE+ is suitable for 6 applications: Industrial Controller Service Port, Test and Measurement Console, Data Acquisition and Control Module, Embedded Equipment Maintenance Interface, Networking Equipment Management Port, Automated Test Equipment Interface.

🏭

Industrial Controller Service Port

The MAX232AESE+ fits an industrial controller that exposes configuration, diagnostics, or service commands through a wired RS-232 connector. Its two drivers and two receivers permit two outbound command paths and two inbound status paths from one +5 V interface IC, reducing the number of discrete interface components. Operating from 4.5 V to 5.5 V supports a regulated 5 V control rail. The main design consideration is isolating connector-side transients with the protection strategy required by the installation environment, while routing the sensitive transceiver circuitry away from switching nodes and high-current machinery wiring.

🖥️

Test and Measurement Console

A bench instrument can use the MAX232AESE+ to bridge its host computer and front-panel service circuitry through RS-232. The two transmit channels can carry separate commands or status data, while the two receive channels can accept instrument responses or remote-control feedback. Because the device operates from 4.5 V to 5.5 V, it aligns with conventional +5 V logic without requiring a separate approximately ±12 V supply. Keep the receiver traces short, terminate them according to the system grounding policy, and use the manufacturer application circuit to select the required charge-pump and interface capacitors.

📡

Data Acquisition and Control Module

The MAX232AESE+ is useful in a data-acquisition module that transfers measurement commands and collected results over an RS-232 link. Two driver channels and two receiver channels provide flexibility for separating control traffic from status or alarm traffic. Its +5 V operating range allows implementation beside CMOS control logic, while the compact 16-SOIC package helps preserve board area. For reliable operation, confirm that the selected module regulator can tolerate the transceiver's supply current transients and that the external connector protection is consistent with the cable length and grounding environment.

🔧

Embedded Equipment Maintenance Interface

Embedded equipment can retain a maintenance connector implemented with the MAX232AESE+ even when the primary system interface is modern and high speed. The RS-232 channels provide a simple path for boot-loader access, factory testing, firmware recovery, and diagnostic commands. Two transmitters and two receivers allow separate service and status channels if required. The device's 4.5 V to 5.5 V supply range is compatible with regulated 5 V equipment, but production designs should validate the selected grade's temperature range, enforce a controlled ground reference, and add connector-level surge protection where cables leave the enclosure.

🌐

Networking Equipment Management Port

The MAX232AESE+ can implement an out-of-band management connection in switches, routers, or other networked equipment where a dedicated RS-232 console remains useful for installation and recovery. One transmit channel can carry console commands and one receive channel can return equipment status, while the second pair handles auxiliary control signals. The +5 V architecture simplifies integration with equipment already using 5 V logic rails. Design the console interface with a defined signal-ground relationship, protection appropriate to exposed cabling, and firmware flow control so long messages cannot overrun the receive buffer.

⚡

Automated Test Equipment Interface

Automated test equipment can use the MAX232AESE+ as a local controller link between test electronics, fixtures, and supervisory software. Two transmitter channels support separate test commands and fixture-control signals, while two receiver channels can return measurements and equipment acknowledgments. The 4.5 V to 5.5 V range permits use with a regulated 5 V test-board rail, and the 16-SOIC footprint simplifies assembly where space is limited. Account for grounding differences between the tester and fixture, place protection close to the connector, and validate command timing against the slowest supported endpoint.

What is MAX232AESE+ and what does it do?
MAX232AESE+ is a +5 V-powered dual RS-232 transceiver containing two line drivers and two receivers in a 16-pin SOIC package. Maxim Integrated describes the MAX232A family as intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where approximately ±12 V is unavailable. The two-driver, two-receiver arrangement lets one IC provide two transmit channels and two receive channels.
What is the operating voltage of MAX232AESE+?
The MAX232AESE+ operates from a 4.5 V to 5.5 V supply. According to the MAX232AESE datasheet information, the device is a +5 V-powered RS-232 interface IC, so a regulated 5 V rail with sufficient transient margin is the intended operating condition. Confirm decoupling, supply sequencing, and capacitor requirements in the manufacturer datasheet before finalizing the power network.
Where can I download the MAX232AESE+ datasheet PDF?
The MAX232AESE+ datasheet can be obtained from the Analog Devices product page for MAX232A, which provides the latest manufacturer data-sheet revision and supporting documentation. The manufacturer identifies the document as the MAX232A +5 V-Powered, Multichannel RS-232 Drivers/Receivers Data Sheet. Use the manufacturer datasheet for the complete pin description, charge-pump circuit, electrical characteristics, and package drawing.
Where can I find the MAX232AESE+ pinout?
The MAX232AESE+ pinout is documented in the MAX232A manufacturer datasheet rather than in the distributor listing text. The component uses a 16-pin SOIC package and is compatible with the standard narrow-body SOIC-16 land pattern. Before assigning PCB nets, use the pin-description table and package drawing in the manufacturer datasheet to verify every transmitter, receiver, supply, ground, and charge-pump connection.
What are the key specifications of MAX232AESE+ that engineers should know?
The principal MAX232AESE+ specifications are a 4.5 V to 5.5 V supply range, two RS-232 drivers, two receivers, enhanced-CMOS construction, and a 16-SOIC package measuring 3.90 mm wide. The device belongs to the MAX220-MAX232A family supporting EIA/TIA-232E and V.28/V.24 interfaces. These parameters determine its suitability for +5 V serial-port equipment.
Where to buy MAX232AESE+ online?
Use the Request a Quote form on this page to request MAX232AESE+ availability, package information, and a current quotation from XAIPART. The exact ordering code is MAX232AESE+, so include the full suffix when submitting the request. The manufacturer lists the MAX232A product family as production, while current stock and delivery timing should be confirmed through the quotation process.
What is the price of MAX232AESE+?
Use the Request a Quote form on this page for the current price of MAX232AESE+. The structured offer is refreshed separately from the technical description, so engineers can evaluate the package, interface functions, and documentation before requesting a binding quotation. Include the required quantity, target package, and delivery location with the request.
What is the lead time for MAX232AESE+?
Request the current lead time through the Request a Quote form on this page. Lead time depends on order quantity, inventory position, packaging requirements, and destination, so a confirmed delivery schedule should accompany the quotation. Maxim Integrated identifies MAX232A as production, which supports normal sourcing activity, but it does not by itself guarantee a particular allocation or delivery date.
Is MAX232AESE+ in stock?
Current MAX232AESE+ stock should be confirmed through the Request a Quote form on this page. A distributor listing may indicate availability, but inventory changes rapidly and may differ by package, quantity, and region. Provide the required quantity and delivery requirements so the quotation can reflect the correct orderable configuration and current supply position.
MAX232AESE+ vs MAX232ECSE - which is better for a +5 V RS-232 port?
MAX232AESE+ is the more appropriate choice when the design specifically calls for the MAX232A enhanced-CMOS, +5 V RS-232 device and its 16-SOIC footprint. The cross-reference results identify MAX232ECSE as a comparable device but do not establish identical electrical performance across every parameter. Review the manufacturer comparison and complete both datasheets before approving either part as a substitute.
What is the difference between MAX232AESE+ and MAX232ID?
A comparison source describes MAX232ID and MAX232AESE+ as having identical principal performance profiles, but that conclusion is not a substitute for pin-level review. The verified listing identifies MAX232AESE+ as a 16-SOIC, 2-driver/2-receiver +5 V RS-232 transceiver. Confirm package dimensions, exposed-pad requirements, pin functions, and ordering codes in the individual manufacturer datasheets before using MAX232ID as a drop-in replacement.
When should I choose MAX232AESE+ over MAX232ECSE?
Choose MAX232AESE+ when the bill of materials specifies the MAX232A family, the +5 V enhanced-CMOS implementation, or the 16-SOIC package identified in the product listing. Choose MAX232ECSE only after checking its manufacturer datasheet for every requirement that affects the design, including supply limits, channel performance, capacitor values, temperature range, and exact pin arrangement. The available comparison information establishes family similarity, not universal functional identity.
Is MAX232AESE+ suitable for industrial-control equipment?
MAX232AESE+ is suitable for +5 V equipment that uses an RS-232 interface for configuration, diagnostics, or service communication. Its two drivers and two receivers can support two outbound and two inbound channels, while the single +5 V architecture simplifies the power design. For industrial deployment, verify the temperature range, isolation needs, surge protection, and regulatory requirements before installation.
What can replace MAX232AESE+?
Several Maxim Integrated MAX232-family devices are potential pin-compatible candidates, but a valid replacement must match the 16-SOIC pinout and required electrical characteristics. MAX232ESE+, MAX232CSE+, MAX232EESE+, and MAX232AESE+T are same-family options identified for engineering review. The documented cross-reference results also indicate additional products, but their individual pin and parameter details must be verified before substitution.
Is MAX232AESE+ the same as MAX232CSE+?
No unconditional equivalence should be assumed between MAX232AESE+ and MAX232CSE+. They are both +5 V multichannel RS-232 interface devices in the broader MAX220-MAX249 family, and MAX232CSE+ is a same-brand drop-in candidate for review. However, charge-pump topology, external capacitor requirements, driver performance, temperature grade, and exact ordering codes may differ even when the SOIC-16 land pattern is shared.
What is the best STMicroelectronics equivalent for MAX232AESE+?
The cross-reference search identifies STMicroelectronics among the manufacturers associated with MAX232A alternatives, but it does not name a specific STMicroelectronics part in the available result. Therefore, no ST part can be represented as a verified drop-in equivalent on this page. Use the manufacturer cross-reference resources to identify a candidate and then confirm its SOIC-16 pinout, supply range, channel count, and electrical characteristics.

Engineering reference data for MAX232AESE+ — comparison, design guidance, and compliance information.

Selection Guide

Choose MAX232AESE+ when the design requires a +5 V RS-232 interface with two drivers and two receivers in a 16-SOIC package and the bill of materials specifies the MAX232A enhanced-CMOS implementation. MAX232ESE+ and MAX232CSE+ are same-brand, same-package candidates when their exact electrical limits, temperature grade, and external capacitor requirements meet the application. MAX232EESE+ can be considered when its family-specific characteristics suit the design, while MAX232AEWE and MAX232AESE+T require careful review of ordering suffix and grade differences. For every candidate, compare pin functions, supply range, driver and receiver specifications, external support components, and package drawing. The available cross-reference results indicate additional possible products, including possible STMicroelectronics alternatives, but a named cross-brand part is not established here; do not approve a cross-brand substitute until its manufacturer documentation proves pin compatibility and electrical equivalence.

Comparison with Alternatives

Parameter This Product MAX232ESE+ MAX232CSE+ MAX232EESE+ MAX232AEWE MAX232AESE+T
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Nominal Supply +5 V +5 V family candidate +5 V family candidate +5 V family candidate +5 V family candidate +5 V family candidate
Package Width 3.90 mm 3.90 mm SOIC-16 family candidate 3.90 mm SOIC-16 family candidate 3.90 mm SOIC-16 family candidate 3.90 mm SOIC-16 family candidate 3.90 mm SOIC-16 family candidate

Key Differentiators

  • Combines two transmit and two receive channels in one interface IC (vs MAX232ESE+)
  • Uses a compact standard narrow-body SOIC-16 footprint (vs MAX232CSE+)
  • Operates directly from a regulated 5 V rail (vs MAX232EESE+)
  • Supports the documented EIA/TIA-232E, V.28 and V.24 interface family (vs MAX232AEWE)

Design Notes

Place the charge-pump support capacitors and the RS-232 interface-network components close to their corresponding MAX232AESE+ pins. Keep the 16-SOIC footprint consistent with the manufacturer package drawing and confirm that connector-side protection is positioned near the external connector. Use the datasheet's reference circuit to determine capacitor values and avoid substituting values from a different MAX232-family member without checking the charge-pump design.

Do not treat every MAX232-family ordering code as automatically interchangeable. Although the listed candidates use the same broad 16-SOIC interface arrangement, external capacitor values, slew rate, temperature grade, and active or shutdown behavior can differ between suffixes. Before releasing a substitution, compare the manufacturer pin tables and electrical characteristics and verify that the PCB accommodates the selected package's land pattern.

Route RS-232 connector traces away from clocks, switching regulators, and sensitive analog inputs to reduce susceptibility to common-mode noise. Maintain a deliberate signal-ground relationship between the transceiver and connector shield, especially when the connected equipment uses a different earth reference. Where a cable leaves the enclosure, place the protection network near the connector and use the manufacturer's application guidance to select protection and bypass components.

The MAX232AESE+ is intended for a 4.5 V to 5.5 V supply, so the system regulator and local bypass network must remain within that range under load and transient conditions. Confirm the device's supply-current requirement from the manufacturer datasheet and allow adequate regulator headroom. Check the recommended input and charge-pump capacitor values against the selected family member rather than relying on general RS-232 design conventions.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The product is an RS-232 interface IC rather than an automotive-qualified device, so AEC-Q100 is not applicable. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the manufacturer text available for this part.

Related Searches

max232 datasheet MAX232AESE+ datasheet MAX232AESE+ datasheet pdf MAX232AESE+ pinout MAX232AESE+ SOIC-16 MAX232AESE+ equivalent MAX232AESE+ replacement MAX232AESE+ cross reference MAX232AESE+ vs MAX232ECSE MAX232AESE+ price MAX232AESE+ stock Maxim Integrated MAX232AESE+ MAX232AESE+ 4.5V 5.5V MAX232AESE+ RS-232 interface MAX232AESE+ footprint

Related Components & Terms

Maxim Integrated MAX232AESE+ MAX232A MAX232ESE+ MAX232CSE+ MAX232EESE+ MAX232AEWE MAX232AESE+T RS-232 transceiver RS-232 driver RS-232 receiver line transceiver interface IC EIA/TIA-232E V.28 V.24 enhanced CMOS 16-SOIC SOIC family surface-mount package serial communication industrial control service console charge-pump capacitor
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details