MAX232IDW - 120kbps Dual RS-232 Transceiver | Texas Instruments
MPN: MAX232IDW ⚠ Last Time BuyMAX232IDW Overview
An RS-232 transceiver is an interface IC that converts logic-level signals between TTL/CMOS equipment and the voltage-defined RS-232 interface. The MAX232 belongs to the RS-232 interface transceiver family, which sits within interface ICs and broader semiconductor communication components. Its integrated charge pump reduces the external component count compared with discrete RS-232 implementations.
The device supports data rates up to 120 kbps and includes two drivers plus two receivers for bidirectional serial links. Its receiver can accept input levels up to ±30 V, which provides margin for ±15 V RS-232 signaling and transient conditions. The stated receiver threshold is typically 1.3 V with 0.5 V hysteresis. Texas Instruments identifies ±9 V outputs and ±2 kV ESD protection as principal product features.
Because MAX232IDW accepts a 4.5 V to 5.5 V supply, downstream circuitry must already have a compatible 5 V rail. It cannot directly operate from a 3.3 V system supply. The on-chip voltage converter requires external charge-pump capacitors, while normal system design also needs connection protection, grounding, and cable-routing consideration. Its typical supply current is 8 mA, making it suitable for established 5 V industrial, instrumentation, and embedded-control interfaces.
Typical uses include legacy RS-232 ports on test equipment, industrial controllers, serial adapters, service interfaces, and embedded systems that communicate with older peripherals. Two driver/receiver pairs support one or more duplex channels without adding separate line-driver ICs. The device is also suited to legacy industrial equipment where RS-232 remains the established service or configuration interface.
For a new design, verify that the connector and cable carry RS-232 bipolar voltage rather than RS-485 differential signaling. Place the charge-pump capacitors close to their designated pins and use a low-impedance ground return for reliable receiver operation. If the system supply is 3.3 V, choose a specifically rated 3.3 V-compatible transceiver instead of adding an unnecessary regulator solely for MAX232IDW.
This product data combines manufacturer specifications, lifecycle information, and cross-reference results with practical interface-design guidance. The comparison and drop-in guidance distinguish package compatibility from functional similarity, helping engineers avoid substitutions that require PCB changes or revised power-supply and protection schemes.
Drop-in alternatives for MAX232IDW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MAX232IDW (same form factor and footprint) — differing in ESD Protection, Product Type, Maximum Data Rate, Interface Standard, Package.
MAX232ESE+T
✅ Drop-InContact for price
View Datasheet →MAX232EWE
✅ Drop-In📋 Reference alternative (not in catalog)
MAX232DG4
✅ Drop-InContact for price
View Datasheet →MAX232ECDW
✅ Drop-InContact for price
View Datasheet →MAX202CDWR
✅ Drop-InContact for price
View Datasheet →MAX232IDW Specifications
| Transceiver Configuration | 2/2 dual driver and receiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Maximum Data Rate | 120 kbps |
| Nominal Supply Voltage | 5 V |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Output Voltage | ±9 V |
| Receiver Maximum Input Voltage | ±30 V |
| Receiver Threshold | 1.3 V typical |
| Receiver Hysteresis | 0.5 V typical |
| ESD Protection | ±2 kV |
| Supply Current | 8 mA typical |
| Operating Temperature Range | -40°C to +85°C |
| Package | 16-pin SOIC |
| Mounting Type | Surface mount |
| Interface Standard | TIA/EIA-232-F |
| Recommendation | ITU Recommendation V.28 |
| RoHS Classification | RoHS3 |
| Lifecycle Status | Last time buy |
MAX232IDW 16-pin soic Pin Configuration Guide
Pin configuration for MAX232IDW (16-pin soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MAX232IDW.
Refer to the datasheet for full pin configuration.
Typical Applications
MAX232IDW is suitable for 6 applications: Legacy Industrial Control Interfaces, Test and Measurement Equipment, Embedded Serial Adapters, Instrumentation and Control Panels, Serial Communication Test Equipment, Appliance and Service Communications.
Legacy Industrial Control Interfaces
The MAX232IDW fits legacy industrial controllers that expose a service or configuration port using conventional RS-232. Its two drivers and two receivers support bidirectional communication from one 16-pin SOIC device, while the 120 kbps maximum data rate is appropriate for parameter uploads, diagnostic commands, and configuration exchanges. The 4.5 V to 5.5 V supply requirement means the controller must already provide a stable 5 V rail. For long field cables, retain the device’s specified ±2 kV ESD protection but add application-appropriate surge and overvoltage protection. Use a low-impedance signal-ground return to keep receiver thresholds reliable.
Recommended
Test and Measurement Equipment
The MAX232IDW is suitable for RS-232 service ports on oscilloscopes, analyzers, programmable instruments, and laboratory equipment. Its receiver input capability extends to ±30 V, providing margin for bipolar RS-232 signaling, while the 120 kbps rate supports command and measurement-data links that do not require high-speed serial protocols. The device converts bipolar line signals into 5 V TTL/CMOS levels for embedded control logic and uses its integrated voltage generator to produce approximately ±9 V driver outputs. Verify connector pin assignments, grounding, and any external cable protection against the manufacturer data before connecting equipment to long or electrically noisy environments.
Recommended
Embedded Serial Adapters
MAX232IDW can provide the RS-232 physical layer in embedded systems that must connect a 5 V controller or microcontroller UART to a legacy PC, peripheral, or service interface. Two transmit and two receive channels allow a duplex link and spare serial lines without multiple single-channel transceivers. The 8 mA typical supply current is reasonable for a 5 V industrial or appliance platform, but the part is not a direct fit for a 3.3 V-only system. Confirm the UART logic levels, use the manufacturer charge-pump capacitor values, and place protection components close to the connector so electrostatic-discharge currents do not traverse sensitive board areas.
Recommended
Instrumentation and Control Panels
The MAX232IDW fits instrumentation panels and controller boards that retain an RS-232 commissioning interface alongside more modern communications. The 16-pin SOIC package supports compact surface-mount layouts, and the -40°C to +85°C range covers many industrial environments. Its ±9 V driver output and ±30 V receiver input capability provide compatibility with standard bipolar RS-232 signaling. Because the device requires a 5 V rail and external charge-pump capacitors, reserve the correct board area and follow the recommended layout. For exposed installations, supplement the specified ±2 kV ESD protection with properly selected surge and overvoltage components.
Recommended
Serial Communication Test Equipment
The MAX232IDW can be used in bench fixtures and communication test adapters that translate between 5 V logic and RS-232. Its 120 kbps operating rate is sufficient for many legacy configuration and diagnostic protocols, while two transmitter and two receiver channels simplify multi-signal test access. Use a receiver threshold of 1.3 V typical and 0.5 V typical hysteresis as part of interface-margin assessment, while recognizing that actual noise immunity also depends on cabling and grounding. Place interface protection at the connector boundary, and avoid substituting a 3.3 V-only transceiver without verifying receiver and driver compatibility with the equipment under test.
Recommended
Appliance and Service Communications
MAX232IDW is appropriate for appliances, printers, scanners, and service equipment that expose an RS-232 diagnostic port. The two-channel transceiver arrangement supports a bidirectional service link and allows one channel to be reserved for hardware-handshake signals when required. Its single 5 V supply and integrated capacitive voltage generator simplify the interface compared with a discrete driver implementation, although the charge-pump capacitors remain mandatory. The last-time-buy lifecycle status makes replacement planning important for new production designs; engineers should evaluate a documented same-family alternative or a 3.3 V-compatible transceiver where the broader system architecture permits it.
Recommended
Recommended Products Summary
Engineering reference data for MAX232IDW — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MAX232ESE+T | MAX232EWE | MAX232DG4 | MAX232ECDW | MAX202CDWR |
|---|---|---|---|---|---|---|
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
| Brand | Texas Instruments | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
Key Differentiators
- Documented 120 kbps operation with two transmit and two receive channels (vs MAX202CDWR)
- Strongest reported primary-parameter match (vs MAX232ESE+T)
- Primary ESD and voltage-level protection are explicitly specified (vs MAX232DG4)
- Broad industrial temperature coverage (vs MAX232ECDW)
Design Notes
Use the Texas Instruments MAX232 datasheet layout as the authority for charge-pump capacitor values, voltage rating, and placement. Position those capacitors directly between their designated pins with short traces and a compact ground return. Keep the unprotected logic-side routing away from the connector boundary, and place any selected surge or ESD protection network at the entry point so transient current is shunted before it reaches MAX232IDW. Also maintain a continuous signal-ground path between the transceiver and the connected equipment.
MAX232IDW requires a 4.5 V to 5.5 V supply and is not a native 3.3 V part. If the system already contains a 5 V rail, place a local bypass capacitor near the device supply pins and keep the charge-pump return current compact. If the board is powered only from 3.3 V, adding a regulator solely for this transceiver increases conversion loss and component count; a native 3.3 V RS-232 device is usually the cleaner architecture. Do not treat TTL-level signals as proof that the transceiver can use a 3.3 V supply.
RS-232 and RS-485 use different signaling, connectors, and circuit arrangements. The MAX232IDW requires bipolar RS-232 voltages and a shared ground reference; it cannot connect directly to an RS-485 differential bus. Also do not exceed the documented ±30 V receiver input level or assume the internal ±2 kV ESD rating is a complete lightning, industrial-surge, or cable-fault solution. Confirm connector pin numbering, logic polarity, baud rate, data framing, and grounding before energizing the interface.
For cable-based RS-232 links, minimize common-impedance effects by connecting the interface ground near the connector and using a low-impedance ground plane. Keep long protected traces away from clocks, switching nodes, and ADC inputs. The 1.3 V typical receiver threshold and 0.5 V typical hysteresis describe the nominal decision region, but noise margin still depends on the cable environment and return path. Consider directional or surge protection when the port is user-accessible or connected to equipment outside the controlled enclosure.
Compliance Information
The product listing identifies RoHS3 compliance. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for MAX232IDW.