Analog Devices

MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices

MPN: MAX3221EUE+TG1Z ✓ Active
+3 V to +5.5 V Vdss 1 uA Id 16-pin TSSOP Package
MOQ: 1 |

MAX3221EUE+TG1Z Overview

The Analog Devices MAX3221EUE+TG1Z is a single-channel RS-232 transceiver with one transmitter and one receiver, operating from a 3 V to 5.5 V supply in a 16-pin TSSOP package. The device provides a 250 kbps data rate, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection rated at ±15 kV IEC-ESD. Its MAX3221E family architecture combines RS-232 line-driver and receiver functions in one package, making it suitable for compact serial-interface equipment.

An RS-232 transceiver is an interface IC that converts logic-level digital signals to RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. The MAX3221E belongs to the broader RS-232 transceiver, line-driver/receiver, communications-interface, and interface-IC hierarchy. Its single-channel arrangement is appropriate when a system needs one serial port rather than multiple RS-232 channels.

The main advantages of the MAX3221E family are its low 3 V supply operation, 250 kbps maximum signaling rate, automatic power management, and enhanced ESD protection. AutoShutdown reduces supply consumption when the receiver does not detect a valid signal, while automatic wake-up restores operation when valid data returns. The manufacturer describes the MAX3221, MAX3223, and MAX3243 as achieving 1 uA supply current with this shutdown mechanism.

The EUE+TG1Z ordering code identifies the MAX3221E device in a 16-pin TSSOP package, with the industrial temperature option and tape-and-reel production form indicated by the ordering suffix. The MAX3221E family supports 3 V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. Its protected receiver and driver outputs are intended for equipment where the external serial port can be exposed to electrostatic discharge or cable transients.

Typical applications include industrial serial consoles, programmable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port. In each case, the transceiver can operate from a 3 V system rail while providing the larger voltage swings required by RS-232. The 250 kbps capability also supports moderately high-speed legacy serial links, although the chosen protocol, cable length, and receiver thresholds remain important system-level constraints.

Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor connections, keep the RS-232 trace route away from sensitive analog or high-speed digital nets, and provide the required protection and grounding strategy at an external connector. The device’s automatic shutdown behavior should also be checked against the system’s idle-state and remote-wakeup expectations.

This page combines the exact orderable MPN, interface characteristics, package information, practical application guidance, and verified comparison context. It also identifies where detailed pin mapping, lifecycle status, and complete alternative-specific electrical limits must be confirmed in the manufacturer datasheet before design release.

Drop-in alternatives for MAX3221EUE+TG1Z — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX3221EUE+TG1Z (same form factor and footprint) — differing in Maximum Data Rate, Number of Receivers, Supply Voltage Range, Device Type, ESD Protection.

Analog Devices
Maximum Data Rate: 235 kbps
Number of Receivers: 1
Supply Voltage Range: 3 V to 5.5 V
Compare with MAX3221EUE+TG1Z →
Maxim Integrated
Maximum Data Rate: 1 Mbps
Number of Receivers: 2
Supply Voltage Range: 3.0 V to 5.5 V
Compare with MAX3221EUE+TG1Z →
Texas Instruments
Maximum Data Rate: 250 kbit/s
Number of Receivers: 2
Supply Voltage Range: 3 V to 5.5 V
Compare with MAX3221EUE+TG1Z →

MAX3221EUE+

✅ Drop-In
Analog Devices
📦 16-pin TSSOP
1/1 RS-232 transceiver · 1 · 1 · 3 V to 5.5 V · 235 kbps · 1 µA · AutoShutdown with automatic wake-up · Single-supply operation with charge-pump voltage generation

Contact for price

View Datasheet →

MAX3221EAE+TG1Z

✅ Drop-In
Analog Devices
📦 16-pin TSSOP
Single-channel RS-232 transceiver · 1 driver · 1 receiver · 3 V to 5.5 V · 250 kbps · 1 µA · ±15 kV IEC ESD · Supported

Contact for price

View Datasheet →

MAX3221EEUE

✅ Drop-In
📦 16-pin TSSOP
Same MAX3221E family and 16-pin TSSOP format; the additional E suffix identifies a related ordering variant with unspecified electrical differences.

📋 Reference alternative (not in catalog)

MAX3232CUE+

✅ Drop-In
Maxim Integrated
📦 16-pin TSSOP
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

Contact for price

View Datasheet →

MAX3232EIPWRQ1

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
2 · 2 · 2/2 full-duplex · 3 V to 5.5 V · 250 kbit/s · TIA/EIA-232-F · ITU V.28 · ±15 kV IEC, pin-to-pin

Contact for price

View Datasheet →

MAX3238IPWR

✅ Drop-In
📦 16-pin TSSOP
Same 16-pin TSSOP RS-232 interface format; receiver, shutdown, and supply differences are .

📋 Reference alternative (not in catalog)

MAX3221EUE+TG1Z Specifications

Device Type 1/1 full RS-232 transceiver
Number of Transmitters 1 transmitter
Number of Receivers 1 receiver
Supply Voltage Range +3 V to +5.5 V
Maximum Data Rate 250 kbps
Power-Supply Shutdown Current 1 uA
ESD Protection +/-15 kV IEC-ESD
Interface Standard EIA/TIA-232
Supported Protocol Levels V.28 and V.24
Power Management Feature AutoShutdown with automatic wake-up
Package 16-pin TSSOP
Mounting Type Surface mount
Temperature Grade Industrial
Terminal Count 16 terminals
Package Family TSSOP

MAX3221EUE+TG1Z tssop Pin Configuration Guide

Pin configuration for MAX3221EUE+TG1Z (tssop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

tssop package pinout diagram for MAX3221EUE+TG1Z

No detailed pinout data available for MAX3221EUE+TG1Z.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX3221EUE+TG1Z is suitable for 6 applications: Industrial Serial Console, Programmable Test Equipment, Point-of-Sale Terminal, Embedded Instrument Interface, RS-232 Connectivity Hub, Security and Access Controller.

🏭

Industrial Serial Console

The MAX3221EUE+TG1Z is suitable for an industrial controller or service console that must retain an RS-232 diagnostic port while operating from a 3.3 V system rail. Its +3 V to +5.5 V supply range supports low-voltage logic systems, and the 250 kbps rate accommodates moderately fast serial links. Automatic shutdown can reduce power when no receiver activity exists, although the host software must tolerate the wake-up sequence. Industrial enclosure grounding, cable transients, and ESD protection around the connector should be reviewed alongside the device’s ±15 kV IEC-ESD rating.

🖥️

Programmable Test Equipment

Test and measurement instruments often need a short-distance control link for legacy instruments, fixture controllers, or service peripherals. The MAX3221EUE+TG1Z provides one full RS-232 channel in a compact 16-pin TSSOP, supports rates up to 250 kbps, and can operate from the same 3.3 V rail as the instrument’s digital control logic. Its automatic shutdown behavior helps avoid unnecessary transceiver activity between commands. Keep the serial trace short, observe the required charge-pump capacitors, and validate the complete command protocol across the selected cable length before release.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal or peripheral interface can use the MAX3221EUE+TG1Z for an RS-232 printer, scanner, or customer-display link. The device reduces the external footprint by integrating one driver, one receiver, charge-pump support, and ESD protection into a 16-pin TSSOP. Operation from +3 V to +5.5 V lets the interface share a common system rail, while the 250 kbps capability is more than adequate for many legacy peripheral protocols. Confirm AutoShutdown timing against the peripheral’s request/response behavior to prevent missed wake-up or partial-character conditions.

🔧

Embedded Instrument Interface

The MAX3221EUE+TG1Z is useful in embedded laboratory and industrial instruments that expose a configuration or service port over RS-232. A 3.3 V embedded controller can communicate through the transceiver without adding a separate 5 V interface rail, and the automatic shutdown function reduces current during idle periods. The 250 kbps capability supports efficient firmware download or diagnostic traffic. Because the exact pin mapping is not reproduced in the product listing, the PCB should be assigned from the manufacturer pin-description table and checked against the selected charge-pump network.

🌐

RS-232 Connectivity Hub

A connectivity or maintenance hub that must bridge a host UART to an RS-232 peripheral can place the MAX3221EUE+TG1Z beside the host processor. The transceiver converts the processor’s logic-level UART signals to RS-232 levels and returns received data to the host, while automatic shutdown and wake-up reduce power during idle periods. The 16-pin TSSOP package supports compact PCB layouts, but the layout must preserve the charge-pump capacitor loop and keep the RS-232 nets isolated from sensitive digital signals. Verify the host UART logic levels and the peripheral’s cable-grounding arrangement.

🎥

Security and Access Controller

Access-control and security equipment can use the MAX3221EUE+TG1Z for a wired maintenance or credential-reader interface. The integrated ±15 kV IEC-ESD protection adds useful robustness for a connector that may be touched during installation, while the 3 V to 5.5 V operating range supports compact embedded systems. The automatic shutdown behavior is valuable in low-power installations, but controller firmware should maintain the receiver in a state that permits expected wake-up events. External surge protection and enclosure bonding may still be needed for installations exposed to severe electrical environments.

What is the MAX3221EUE+TG1Z?
The MAX3221EUE+TG1Z is a single-channel RS-232 transceiver from Analog Devices with one transmitter and one receiver in a 16-pin TSSOP package. According to the manufacturer product page, the MAX3221 family operates from +3 V to +5.5 V and supports communication rates up to 250 kbps. The device is intended for EIA/TIA-232, V.28, and V.24 interfaces while also providing automatic shutdown, automatic wake-up, and enhanced ESD protection.
What are the key specifications of MAX3221EUE+TG1Z that engineers should know?
The MAX3221EUE+TG1Z provides one RS-232 transmitter and one receiver, a +3 V to +5.5 V supply range, and a maximum data rate of 250 kbps in a 16-pin TSSOP package. The manufacturer identifies automatic shutdown and wake-up plus ±15 kV IEC-ESD protection as principal family features. The MAX3221 family also achieves 1 uA supply current when the on-board power supply and drivers shut down following an absence of valid receiver signals.
Where can I download the MAX3221EUE+TG1Z datasheet PDF?
The official MAX3221 documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max3221.html. The page identifies the MAX3221 data sheet as Data Sheet Rev. 10 and provides the manufacturer’s technical documentation. A separate copy of the MAX3221EUE+TG1Z datasheet is also indexed at https://pdf.digi-electronics.com/pdf/1471/MAX3221EUETG1Z-datasheet.pdf, but the manufacturer page should be treated as the authoritative source for design release.
Where can I find the MAX3221EUE+TG1Z pinout?
Use the pin-description diagram and pin table in the MAX3221 manufacturer data sheet for the complete TSSOP-16 assignment. The verified product listing identifies MAX3221EUE+TG1Z as a 16-TSSOP device, but it does not expose the numbered pin table. The official documentation is available at https://www.analog.com/en/products/max3221.html. Confirm pin numbers, exposed functions, capacitor connections, and no-connect status directly against that document before routing a new PCB.
What voltage does the MAX3221EUE+TG1Z require?
The MAX3221EUE+TG1Z requires a supply voltage between +3 V and +5.5 V. According to the Analog Devices MAX3221 product page, the family is designed for 3 V operation, making it suitable for systems in which the logic and transceiver can share a 3.3 V rail. The supply range also permits operation from a conventional 5 V rail, provided the associated charge-pump and bypass components follow the manufacturer’s recommended schematic.
What is the maximum data rate of MAX3221EUE+TG1Z?
The MAX3221EUE+TG1Z supports a maximum RS-232 data rate of 250 kbps. This rate is specified for the MAX3221E family by Analog Devices and is appropriate for high-speed legacy serial links. Actual application throughput also depends on the protocol, baud-rate divisor, cable characteristics, grounding, and signal-integrity margin. Treat 250 kbps as the device capability rather than assuming every connected peripheral will sustain that rate over a long cable.
Does MAX3221EUE+TG1Z support automatic shutdown?
Yes. The MAX3221EUE+TG1Z includes the MAX3221 family’s AutoShutdown behavior and automatic wake-up. According to the manufacturer datasheet information, the on-board power supply and drivers shut down when no valid receiver signal is present, reducing supply current to approximately 1 uA. A valid incoming signal wakes the device. Designers should confirm that this state transition meets the idle and remote-resume requirements of the connected host or peripheral.
What ESD protection does the MAX3221EUE+TG1Z provide?
The MAX3221EUE+TG1Z family provides enhanced electrostatic-discharge protection rated at ±15 kV IEC-ESD. Analog Devices identifies this protection as a defining feature of the MAX3221E interface. It improves resilience at an exposed RS-232 connector, although system designers should still evaluate enclosure grounding, cable treatment, and any required external surge protection rather than treating the integrated protection as a complete lightning or industrial surge solution.
Where can I buy MAX3221EUE+TG1Z online?
Use the Request a Quote form on this page to request MAX3221EUE+TG1Z availability, pricing, and current lead time. The exact orderable part is listed as a 16-pin TSSOP RS-232 transceiver by Analog Devices, while the product family is offered with a manufacturer list price starting at $2.52 for the family-level 1ku selection. Request the exact suffix and package before ordering to avoid mismatched production options.
What is the price of MAX3221EUE+TG1Z?
Submit the Request a Quote form on this page for the current MAX3221EUE+TG1Z quotation. The manufacturer page shows a family-level list price starting from $2.52 for 1ku quantities, but that starting figure does not establish the price of the exact MAX3221EUE+TG1Z orderable MPN. The quotation form allows the exact suffix, quantity, and delivery requirements to be confirmed without relying on a potentially mismatched family or distributor price.
What is the lead time for MAX3221EUE+TG1Z?
The current lead time for MAX3221EUE+TG1Z should be confirmed through the Request a Quote form on this page. The verified manufacturer page lists the MAX3221 family as in production, but the listing does not state a fixed lead time for the exact EUE+TG1Z order code. Include your required quantity, shipment destination, and production schedule in the request so the quotation can reflect current manufacturing and allocation conditions.
Is MAX3221EUE+TG1Z in stock?
Request current MAX3221EUE+TG1Z stock through the Request a Quote form on this page. The verified manufacturer information identifies the MAX3221 family as being in production, but it does not explicitly confirm inventory for the exact EUE+TG1Z suffix. A stock confirmation should therefore be treated as transaction-specific rather than inferred from the family’s production status or from the presence of a distributor listing.
What can replace MAX3221EUE+TG1Z?
Potential replacements include the MAX3221EUE, MAX3221EAE+TG1Z, MAX3221EEUE, MAX3232CUE+, MAX3232EIPWR, and MAX3238IPWR, subject to package and pin verification. Cross-reference records identify these parts as related candidates, but only the MAX3221EUE is the closest base-device comparison in the verified results. Verify the exact pin map, supply range, data rate, and shutdown behavior before treating any candidate as a drop-in replacement.
What is the best Analog Devices equivalent for MAX3221EUE+TG1Z?
The closest Analog Devices candidate is the MAX3221EUE, which retains the MAX3221E family identity and 16-pin TSSOP format while changing the exact ordering suffix. The verified comparison data does not establish that MAX3221EUE is pin-to-pin identical in every ordering-code detail, so engineers should compare the official ordering tables and pin descriptions. If the suffix difference represents only tape-and-reel or temperature packaging, replacement can be straightforward; otherwise a board-level review is required.
MAX3221EUE+TG1Z vs MAX3221EUE - which is better?
Choose MAX3221EUE+TG1Z when the exact production suffix and industrial TSSOP-16 orderable configuration are required. MAX3221EUE is the closely related Analog Devices base listing, but the verified result does not expose every suffix-specific attribute, so it should not be treated automatically as interchangeable. Compare the manufacturer ordering information for temperature range, package, and tape-and-reel presentation. The target order code remains the safer selection when the downstream PCB and BOM have already been qualified around it.
When should I choose MAX3221EUE+TG1Z over MAX3232CUE+?
Choose MAX3221EUE+TG1Z when the design specifically requires the MAX3221E single-channel transceiver behavior, automatic shutdown and wake-up, and the established MAX3221E 16-pin TSSOP footprint. MAX3232CUE+ is a related single-channel RS-232 product found in the cross-reference results, but its exact enable, shutdown, and pin behavior should be reviewed before substitution. The MAX3221EUE+TG1Z is preferable when minimizing functional change to an existing MAX3221E-based design is the priority.
Is MAX3232EIPWR pin compatible with MAX3221EUE+TG1Z?
MAX3232EIPWR is a related 16-pin RS-232 transceiver candidate, but the verified comparison result alone does not prove drop-in compatibility with MAX3221EUE+TG1Z. Engineers should compare both devices’ official pin descriptions, supply ranges, transmitter and receiver thresholds, and AutoShutdown behavior. Use it as a redesign candidate only if every connected net remains electrically valid. A footprint match by itself is not enough to authorize a drop-in substitution.

Engineering reference data for MAX3221EUE+TG1Z — comparison, design guidance, and compliance information.

Selection Guide

Choose MAX3221EUE+TG1Z when the design needs a compact, single-channel RS-232 interface that runs directly from a 3.3 V system rail, supports rates up to 250 kbps, and benefits from automatic shutdown, wake-up, and ±15 kV IEC-ESD protection. MAX3221EUE and MAX3221EAE+TG1Z are the closest same-family candidates when an alternate ordering code is acceptable, but suffix-specific temperature and packing details must be checked. MAX3232CUE+ and MAX3232EIPWR can be considered for related 16-pin RS-232 designs after reviewing their pin maps and shutdown behavior. MAX3238IPWR is a broader cross-reference candidate with less confirmed parameter equivalence. For an already released PCB, preserve the target MPN unless the manufacturer pin tables and electrical specifications prove the proposed substitute compatible.

Comparison with Alternatives

Parameter This Product MAX3221EUE MAX3221EAE+TG1Z MAX3232CUE+ MAX3232EIPWR MAX3238IPWR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Transmitter/Receiver Count 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver

Key Differentiators

  • Single-channel RS-232 operation with 3 V supply support (vs MAX3232CUE+)
  • High-rate single-channel interface (vs MAX3238IPWR)
  • Enhanced connector-side ESD protection (vs MAX3232EIPWR)

Design Notes

Place all charge-pump capacitors and the supply bypass capacitor directly beside their associated MAX3221EUE+TG1Z pins. Keep each capacitor’s connection to the device short, and use the capacitor values and PCB-land pattern shown in the manufacturer’s typical application circuit. Avoid routing the charge-pump nodes beneath the TSSOP or between sensitive signal traces, because switching current can couple into adjacent circuitry.

Route the RS-232 receiver and driver nets as a protected interface, keeping them away from clocks, ADC inputs, crystal circuits, and other high-impedance analog nodes. Terminate exposed connector-side nets with the protection strategy appropriate to the installation. The integrated ±15 kV IEC-ESD protection improves robustness, but it does not replace proper enclosure grounding, isolation boundaries, or surge suppression for severe environments.

Do not assume that AutoShutdown behaves as a transparent zero-power state. A valid receiver signal triggers wake-up, so the host UART and connected peripheral must be designed around wake-up latency and partial-character handling. Also verify that the selected capacitor values, supply decoupling, and logic levels match the manufacturer’s reference circuit. Package similarity alone does not prove that MAX3232 or MAX3238 variants are drop-in replacements.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The verified manufacturer product information identifies the MAX3221 family and its technical interface features but does not state part-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose interface IC.

Related Searches

MAX3221EUE+TG1Z datasheet MAX3221EUE+TG1Z datasheet pdf MAX3221EUE+TG1Z pinout MAX3221EUE+TG1Z specifications MAX3221EUE+TG1Z equivalent MAX3221EUE+TG1Z replacement MAX3221EUE+TG1Z cross reference MAX3221EUE+TG1Z price MAX3221EUE+TG1Z stock Analog Devices MAX3221EUE+TG1Z MAX3221EUE+TG1Z TSSOP-16 MAX3221EUE+TG1Z RS-232 transceiver MAX3221EUE+TG1Z vs MAX3221EUE MAX3221EUE+TG1Z application circuit

Related Components & Terms

Analog Devices MAX3221EUE+TG1Z MAX3221E MAX3221EUE MAX3221EAE+TG1Z MAX3232CUE+ MAX3232EIPWR MAX3238IPWR RS-232 transceiver line driver line receiver interface IC communications interface EIA/TIA-232 V.28 V.24 AutoShutdown automatic wake-up 250 kbps 3 V power supply 5.5 V power supply ±15 kV IEC-ESD 16-pin TSSOP TSSOP family surface-mount package charge-pump capacitor industrial serial interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details