Texas Instruments

MAX3232IDB - Dual 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3232IDB ✓ Active
3 V to 5.5 V Vdss 300 µA typical Id SSOP-16 Package
MOQ: 1 |

MAX3232IDB Overview

Texas Instruments MAX3232IDB is a dual RS-232 line driver and receiver with a 3 V to 5.5 V supply, operation to 250 kbit/s, and ±15 kV ESD protection, supplied in a 16-pin SSOP package. The device combines two drivers, two receivers, and a dual charge-pump circuit on one IC.

An RS-232 transceiver is the interface circuit between low-voltage digital logic and the higher-voltage, bipolar signaling used by RS-232 equipment. The MAX3232 translates digital transmitter inputs into RS-232-level driver outputs and converts incoming RS-232 receiver signals into logic-compatible levels. Within the interface IC hierarchy, it belongs to the RS-232 transceiver class of communication interface semiconductors.

Key features include a 3 V to 5.5 V operating supply, two drivers, two receivers, 250 kbit/s operation, and 5 V logic compatibility. The on-chip charge pump generates the positive and negative voltages required by the RS-232 drivers. The manufacturer describes the device as meeting or exceeding TIA/EIA-232-F and ITU V.28 requirements. It also accepts 5 V logic inputs, allowing the device to bridge 3.3 V or 5 V systems to RS-232 ports.

The dual charge-pump design supports low-power RS-232 communication without a separate negative supply. Charge-pump capacitors connected to C1+, C1−, C2+, and C2− develop the bipolar voltage rails needed to drive the outputs. Because the MAX3232IDB supports both 3 V and 5 V supply operation, it can be used in mixed-voltage embedded systems where the logic source operates from 3.3 V while the RS-232 port requires compliant bipolar signal levels.

Typical applications include industrial serial consoles, data acquisition systems, instrumentation, barcode and identification equipment, point-of-sale terminals, and embedded systems using asynchronous RS-232 links. Its 250 kbit/s capability is suitable for moderate-speed control and diagnostic traffic rather than high-bandwidth video or storage transfers. Industrial designs benefit from the ±15 kV ESD protection specified for the serial-port connection pins.

When laying out the circuit, place the four external 0.1 µF charge-pump capacitors close to their associated pins and maintain a short return path through the device ground. Confirm that the external capacitors meet the voltage and tolerance requirements in the manufacturer datasheet. RS-232 cable transients still require appropriate system-level grounding and protection; on-chip ESD protection does not replace correctly designed cable and enclosure engineering.

This page combines the exact electrical ratings, package information, pricing structure, drop-in replacement relationships, and application guidance needed to evaluate the MAX3232IDB in a new RS-232 design. It also highlights where a MAX3232E-family device may be preferable and where strict production equivalence should be confirmed before substitution.

Drop-in alternatives for MAX3232IDB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX3232IDB (same form factor and footprint) — differing in ESD Protection, Operating Temperature, Package, Number of Drivers, Number of Receivers.

Texas Instruments
ESD Protection: +/-15 kV terminal-to-terminal
Operating Temperature: 0 C to +70 C
Package: 16-SSOP, 5.30 mm width
Compare with MAX3232IDB →
Texas Instruments
Operating Temperature: -40C to +85C
Package: 16-TSSOP (0.173 in, 4.40 mm width)
Compare with MAX3232IDB →
Texas Instruments
ESD Protection: ±15kV
Package: 16-pin TSSOP
Number of Drivers: 2 channels
Compare with MAX3232IDB →

MAX3232EIPWG4

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 SSOP-16
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

Contact for price

View Datasheet →

MAX3232IPW

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 SSOP-16
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

Contact for price

View Datasheet →

MAX3232CDB

✅ Drop-In
Texas Instruments
📦 SSOP-16
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 5 V logic · 300 uA · 0.1 uF

Contact for price

View Datasheet →

MAX3232EIDBR

✅ Drop-In
📦 SSOP-16
Improved MAX3232E variant in SSOP-16; versus MAX3232IDB the family generation differs while the 3 V to 5.5 V interface role remains

📋 Reference alternative (not in catalog)

MAX3222IDBR

✅ Drop-In
📦 SSOP-16
MAX3222-family dual transceiver with the same 3 V to 5.5 V supply and SSOP-16 footprint; data-rate and protection details require comparison before substitution

📋 Reference alternative (not in catalog)

MAX3232IDB Specifications

Product Type Dual RS-232 line driver and receiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Logic Compatibility 5 V logic compatible
External Charge-Pump Capacitors 0.1 µF each, 4 capacitors
ESD Protection ±15 kV
RS-232 Compliance TIA/EIA-232-F and ITU V.28
Supply Current 300 µA typical
Technology RS-232 and CMOS
Device Type Transceiver
Package Type SSOP-16
Package Dimensions 5.30 mm
Package Standard MO-150
Number of Pins 16
Operating Temperature 0 °C to 70 °C
Mounting Type Surface mount
RoHS Status Compliant
MSL Level 1, 260 °C unlimited floor life

MAX3232IDB mo-150 Pin Configuration Guide

Pin configuration for MAX3232IDB (mo-150 package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

mo-150 package pinout diagram for MAX3232IDB

No detailed pinout data available for MAX3232IDB.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX3232IDB is suitable for 6 applications: Industrial Serial Console, Data Acquisition Equipment, Barcode and Identification Equipment, Point-of-Sale Terminal, Embedded Instrumentation, Legacy Computer Connectivity.

🏭

Industrial Serial Console

The MAX3232IDB fits industrial serial consoles that connect a controller or embedded computer to debugging, programming, or configuration equipment over RS-232. Its 250 kbit/s operating rate is sufficient for terminal sessions and low-bandwidth diagnostic traffic, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. Two drivers and two receivers allow bidirectional communication on one interface IC. Place the four 0.1 µF charge-pump capacitors close to their pins and route the RS-232 ground as a controlled return path to minimize susceptibility to cable-borne noise.

📟

Data Acquisition Equipment

MAX3232IDB can connect laboratory and industrial data-acquisition equipment to a legacy RS-232 controller. The dual-driver, dual-receiver arrangement reduces the number of interface ICs needed when command traffic flows in both directions. Operation up to 250 kbit/s supports moderate-rate configuration and status protocols rather than continuous high-volume sensor streaming. Its 300 µA typical supply current is useful in compact instruments, while 5 V logic compatibility simplifies interfaces to older controller hardware. External charge-pump capacitors and exposed serial pins still require careful placement to maintain signal and ESD performance.

🧩

Barcode and Identification Equipment

The MAX3232IDB is appropriate for barcode scanners, identification terminals, and handheld equipment that exchange commands and status data with a host through RS-232. The 250 kbit/s rate is more than adequate for short transaction packets, and the two-channel implementation can support separate transmit and receive paths. A 3.3 V embedded processor can operate the transceiver from a suitable rail while the charge pump supplies the bipolar RS-232 levels. The ±15 kV ESD rating strengthens the serial interface, but designers should still add connector-side protection when cables leave the enclosure or cross industrial ground domains.

🖥️

Point-of-Sale Terminal

MAX3232IDB can bridge a point-of-sale terminal or peripheral to an RS-232 printer, scanner, or service connector. The 250 kbit/s maximum data rate comfortably supports short command and receipt-transfer protocols, and the two drivers and receivers provide bidirectional communication without multiple interface packages. Its 3 V to 5.5 V supply operation allows integration with mixed legacy and newer logic systems. The SSOP-16 footprint helps preserve board area, although charge-pump capacitor placement should remain close to the IC. Add system grounding and appropriate protection at any user-accessible connector.

🔧

Embedded Instrumentation

The MAX3232IDB suits embedded instrumentation that reports measurements, accepts calibration commands, or connects to laboratory test equipment through RS-232. The 250 kbit/s data rate is appropriate for command-oriented traffic, and the device’s 300 µA typical supply current helps when the instrument operates from a constrained power budget. Two receivers can monitor separate incoming signals when the protocol permits, while two drivers support independent outbound channels. The commercial 0 °C to 70 °C range must be checked against the instrument environment. Keep charge-pump loops compact and isolate noisy analog or switching sections from the serial interface.

🖨️

Legacy Computer Connectivity

MAX3232IDB provides a straightforward bridge between modern low-voltage embedded logic and legacy RS-232 equipment such as printers, programmers, service tools, and older computers. Its 3 V to 5.5 V supply range allows the digital side to operate from 3.3 V or 5 V while the on-board charge pump generates the bipolar levels required at the line interface. The 250 kbit/s rate is suitable for legacy control traffic. Its 5 V logic compatibility broadens system options, but UART baud-rate accuracy and cable limitations remain system-level considerations. The ±15 kV ESD protection improves robustness at the serial pins.

What is the operating voltage of MAX3232IDB?
The MAX3232IDB operates from a 3 V to 5.5 V supply and also accepts 5 V-compatible logic inputs. According to the Texas Instruments MAX3232 documentation, the wide supply range allows the same transceiver to serve 3.3 V and 5 V systems while producing the bipolar voltage levels required for RS-232 communication. The charge-pump circuitry must be completed with four external 0.1 µF capacitors.
What are the key specifications of MAX3232IDB that engineers should know?
The MAX3232IDB is a 3 V to 5.5 V, 250 kbit/s RS-232 transceiver with two drivers, two receivers, and ±15 kV ESD protection in a 16-pin SSOP package. Texas Instruments specifies 300 µA typical supply current and four external 0.1 µF charge-pump capacitors. The device is suitable for 5 V logic compatibility and meets or exceeds TIA/EIA-232-F and ITU V.28 requirements.
Where can I download the MAX3232IDB datasheet PDF?
The MAX3232IDB datasheet is available through the Texas Instruments product documentation for the MAX3232 family. Use the manufacturer datasheet to verify the SSOP-16 pin assignments, charge-pump capacitor requirements, electrical characteristics, and RS-232 timing before releasing a PCB layout. The component is also indexed by several datasheet mirrors, but the manufacturer document should remain the controlling technical reference for design work.
Where can I find the MAX3232IDB pinout?
The MAX3232IDB pinout is defined by the manufacturer datasheet for its 16-pin SSOP package. The four charge-pump capacitor pins, supply and ground pins, two driver inputs and outputs, and two receiver inputs and outputs must be assigned exactly as shown. Use the pin-description table in the manufacturer datasheet when creating the schematic and PCB footprint rather than inferring connections from a generic RS-232 diagram.
How fast can MAX3232IDB transmit RS-232 data?
The MAX3232IDB supports data rates up to 250 kbit/s according to the manufacturer MAX3232 family documentation. That rate is appropriate for configuration consoles, industrial control links, and moderate-speed instrumentation. Actual application throughput can be lower because of UART baud-rate accuracy, protocol overhead, cable characteristics, and receiver timing margin. The complete interface must also be designed to preserve the specified RS-232 voltage levels.
Where can I buy MAX3232IDB online?
Use the “Request a Quote” form on this page to request MAX3232IDB availability, current commercial terms, and a lead-time quotation for the required SSOP-16 configuration. The manufacturer identifies the IC as a dual 2/2 RS-232 transceiver, and authorized channel records can be checked during procurement. A quotation request avoids stale stock assumptions and lets the exact package and delivery quantity be confirmed before ordering.
What is the price of MAX3232IDB?
Use the “Request a Quote” form on this page for the current MAX3232IDB price based on quantity, package configuration, and supply status. Published channel listings may change without notice and can differ in minimum order quantity, so confirm the commercial terms for the quantity your build requires. The structured pricing information on this page is intended to provide the latest extractable market evidence when available.
What is the lead time for MAX3232IDB?
Request the current MAX3232IDB lead time through the “Request a Quote” form on this page. Lead time depends on order quantity, date, authorized channel inventory, and the selected package or delivery format. The MAX3232IDB is identified as a 16-pin SSOP device, so include that package detail in the request and confirm any alternative production configuration before committing the purchase order.
Is MAX3232IDB in stock?
Current MAX3232IDB stock status should be confirmed through the “Request a Quote” form on this page. The component is a standard Texas Instruments 16-pin SSOP RS-232 transceiver, but availability can vary by quantity and fulfillment channel. Submit the required order quantity and target date so procurement can return a current allocation rather than relying on an outdated inventory indication.
What is the best drop-in replacement for MAX3232IDB?
The Texas Instruments MAX3232E is identified by the manufacturer as an improved direct drop-in replacement for the MAX3232 family. Selection still requires matching the exact SSOP-16 footprint, pin assignment, temperature grade, and ordering suffix. The MAX3232E family provides an improved alternative when the original MAX3232 is unavailable, subject to a final review of electrical limits and production qualifications.
Can MAX3232E replace MAX3232IDB on the same PCB?
Yes, the manufacturer identifies MAX3232E as an improved direct drop-in replacement for MAX3232, and the comparison data indicates the same SSOP-16 family arrangement. Before replacement, verify the exact suffix, temperature range, supply limits, and charge-pump configuration against the current datasheet. Production equivalence must be confirmed for the exact ordering code rather than assumed from the base family name.
MAX3232IDB vs MAX3232E: which is better for a new design?
The MAX3232E is generally preferable for a new design when its ordering code and electrical ratings are acceptable because Texas Instruments recommends it as an improved replacement for MAX3232. The MAX3232IDB remains relevant for existing SSOP-16 designs that require the original 0 °C to 70 °C commercial-temperature variant. Compare exact suffixes, temperature grade, lifecycle status, and PCB compatibility rather than only the base device names.
When should I choose MAX3232IDB over MAX3232E?
Choose MAX3232IDB when maintaining an approved SSOP-16 design that specifies the original MAX3232 commercial-temperature device, or when its exact electrical and qualification requirements are already embedded in a validated assembly. For a new design, evaluate MAX3232E first because the manufacturer calls it an improved direct replacement. The final choice should account for exact suffix equivalence and qualification requirements.
Is MAX3232IDB suitable for industrial RS-232 equipment?
The MAX3232IDB fits industrial equipment requiring a 250 kbit/s RS-232 interface, 3 V to 5.5 V operation, and ±15 kV ESD protection. Its 0 °C to 70 °C operating-temperature specification must remain within the product’s environmental requirements. Add appropriate cable protection and grounding at the connector because the IC’s on-chip ESD rating does not eliminate every system-level transient.
What can replace MAX3232IDB?
The clearest manufacturer-backed replacement is the Texas Instruments MAX3232E family, which the manufacturer describes as an improved direct drop-in replacement for MAX3232. Match the SSOP-16 footprint and exact suffix before substitution, and review temperature grade and device status. A cross-manufacturer substitute requires separate evidence of pin-to-pin and parametric compatibility; the MAX3232E relationship is the strongest documented choice.
Is MAX3232IDB the same as MAX3232EIDBR?
No, MAX3232IDB and MAX3232EIDBR are not identical orderable devices. The MAX3232E family is an improved replacement for the MAX3232, while MAX3232EIDBR includes a distinct package, suffix, and potentially different qualification characteristics. For a drop-in decision, compare the SSOP-16 pinout, temperature range, ESD rating, and exact datasheet limits. Do not treat the family relationship as proof that every suffix is interchangeable.

Engineering reference data for MAX3232IDB — comparison, design guidance, and compliance information.

Selection Guide

Choose MAX3232IDB for an existing or new SSOP-16 design that specifically requires the original MAX3232 commercial-temperature device, a 3 V to 5.5 V supply, two drivers, two receivers, 250 kbit/s operation, and ±15 kV ESD protection. For a new design within the same family, evaluate MAX3232EIPW or MAX3232EIDBR first because Texas Instruments recommends MAX3232E as an improved direct replacement for MAX3232. MAX3232IPW and MAX3232CDB can be considered for same-family procurement, subject to exact suffix, temperature, lifecycle, and qualification checks. MAX3222IDBR is a related dual-transceiver option, but its exact data rate, protection, and pin configuration require direct comparison. For a one-way link, MAX202CDR may reduce channel count, whereas MAX3232IDB is preferable when two independent transmit and receive paths are needed.

Comparison with Alternatives

Parameter This Product MAX3232EIPW MAX3232IPW MAX3232CDB MAX3232EIDBR MAX3222IDBR
Package SSOP-16 SSOP-16 SSOP-16 SSOP-16 SSOP-16 SSOP-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Family MAX3232 MAX3232E MAX3232 MAX3232 MAX3232E MAX3222
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Replacement Relationship Original MAX3232 family device Improved MAX3232E-family option Same-family ordering option Same-family ordering option Manufacturer identifies MAX3232E as improved drop-in replacement Related MAX3222-family dual transceiver

Key Differentiators

  • Manufacturer-backed improved replacement path (vs MAX3232EIDBR)
  • Dual communication channels in one package (vs MAX202CDR)
  • Defined commercial temperature range (vs MAX3232EIPW)
  • RS-232 speed aligned with control and diagnostic links (vs MAX3222IDBR)

Design Notes

Place the four required 0.1 µF charge-pump capacitors close to the corresponding MAX3232IDB pins, with short, symmetrical connections and a direct return to the device ground. Avoid routing the charge-pump loop beneath the package or across sensitive analog inputs. Confirm capacitor voltage rating, dielectric, and tolerance against the manufacturer datasheet before release because these capacitors participate in generating the bipolar RS-232 output levels.

Keep the RS-232 driver and receiver routes away from clocks, switching-node copper, relay contacts, and high-impedance sensor inputs. Maintain a continuous signal-ground reference where the interface cable requires it, while following the system’s chassis-ground strategy to avoid forcing surge current through sensitive logic ground. The on-chip ±15 kV ESD protection should be complemented by connector placement and external protection when the cable is externally accessible.

Do not substitute a generic RS-232 transceiver solely because it has two drivers and two receivers. Verify the SSOP-16 pin assignment, capacitor-pin arrangement, supply range, logic thresholds, receiver topology, and exact ordering suffix. The manufacturer identifies MAX3232E as an improved direct replacement for MAX3232, but every production substitution should still be checked against the exact source and destination datasheets before PCB release.

Treat the 250 kbit/s figure as the maximum device capability rather than the required UART operating rate. UART baud-rate error, protocol framing, cable length, connector wiring, and receiver noise margin can reduce reliable system throughput. Confirm the complete interface under worst-case temperature and supply conditions, especially when the serial link crosses noisy industrial ground domains or uses long unshielded cables.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The MAX3232IDB is identified as RoHS compliant with an MSL 1, 260 °C unlimited floor-life classification. No automotive qualification or additional environmental compliance claim is made for this commercial-temperature device.

Related Searches

MAX3232IDB datasheet MAX3232IDB datasheet pdf MAX3232IDB pinout MAX3232IDB SSOP-16 Texas Instruments MAX3232IDB MAX3232IDB 250kbps MAX3232IDB 3V to 5.5V MAX3232IDB RS-232 transceiver MAX3232IDB drop-in replacement MAX3232IDB vs MAX3232E MAX3232IDB equivalent MAX3232IDB price MAX3232IDB stock MAX3232IDB industrial serial interface MAX3232IDB application circuit

Related Components & Terms

Texas Instruments MAX3232IDB MAX3232EIPW MAX3232IPW MAX3232CDB MAX3232EIDBR MAX3222IDBR MAX202CDR RS-232 transceiver line driver line receiver communication interface IC semiconductor dual charge pump TIA/EIA-232-F ITU V.28 RoHS REACH SSOP-16 SSOP package family surface-mount technology SMD ESD protection 250 kbit/s 3 V to 5.5 V operation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details