MAX3232IDB - Dual 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3232IDB ✓ 啟用中MAX3232IDB 概覽
An RS-232 transceiver is the interface circuit between low-voltage digital logic and the higher-voltage, bipolar signaling used by RS-232 equipment. The MAX3232 translates digital transmitter inputs into RS-232-level driver outputs and converts incoming RS-232 receiver signals into logic-compatible levels. Within the interface IC hierarchy, it belongs to the RS-232 transceiver class of communication interface semiconductors.
Key features include a 3 V to 5.5 V operating supply, two drivers, two receivers, 250 kbit/s operation, and 5 V logic compatibility. The on-chip charge pump generates the positive and negative voltages required by the RS-232 drivers. The manufacturer describes the device as meeting or exceeding TIA/EIA-232-F and ITU V.28 requirements. It also accepts 5 V logic inputs, allowing the device to bridge 3.3 V or 5 V systems to RS-232 ports.
The dual charge-pump design supports low-power RS-232 communication without a separate negative supply. Charge-pump capacitors connected to C1+, C1−, C2+, and C2− develop the bipolar voltage rails needed to drive the outputs. Because the MAX3232IDB supports both 3 V and 5 V supply operation, it can be used in mixed-voltage embedded systems where the logic source operates from 3.3 V while the RS-232 port requires compliant bipolar signal levels.
Typical applications include industrial serial consoles, data acquisition systems, instrumentation, barcode and identification equipment, point-of-sale terminals, and embedded systems using asynchronous RS-232 links. Its 250 kbit/s capability is suitable for moderate-speed control and diagnostic traffic rather than high-bandwidth video or storage transfers. Industrial designs benefit from the ±15 kV ESD protection specified for the serial-port connection pins.
When laying out the circuit, place the four external 0.1 µF charge-pump capacitors close to their associated pins and maintain a short return path through the device ground. Confirm that the external capacitors meet the voltage and tolerance requirements in the manufacturer datasheet. RS-232 cable transients still require appropriate system-level grounding and protection; on-chip ESD protection does not replace correctly designed cable and enclosure engineering.
This page combines the exact electrical ratings, package information, pricing structure, drop-in replacement relationships, and application guidance needed to evaluate the MAX3232IDB in a new RS-232 design. It also highlights where a MAX3232E-family device may be preferable and where strict production equivalence should be confirmed before substitution.
直接替換替代品,適用於 MAX3232IDB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232IDB (相同外形與佔位) — 差異在於 ESD Protection, Operating Temperature, Package, Number of Drivers, Number of Receivers.
MAX3232EIPWG4
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3232IPW
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3232CDB
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EIDBR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3222IDBR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232IDB 規格
| Product Type | Dual RS-232 line driver and receiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s |
| Logic Compatibility | 5 V logic compatible |
| External Charge-Pump Capacitors | 0.1 µF each, 4 capacitors |
| ESD Protection | ±15 kV |
| RS-232 Compliance | TIA/EIA-232-F and ITU V.28 |
| 供應電流 | 300 µA typical |
| Technology | RS-232 and CMOS |
| Device Type | Transceiver |
| Package Type | SSOP-16 |
| Package Dimensions | 5.30 mm |
| Package Standard | MO-150 |
| 腳位數 | 16 |
| 工作溫度 | 0 °C to 70 °C |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| MSL 等級 | 1, 260 °C unlimited floor life |
MAX3232IDB mo-150 腳位配置指南
MAX3232IDB(mo-150 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232IDB.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232IDB 適用於 6 應用s: Industrial Serial Console, Data Acquisition Equipment, Barcode and Identification Equipment, Point-of-Sale Terminal, Embedded Instrumentation, Legacy Computer Connectivity.
Industrial Serial Console
The MAX3232IDB fits industrial serial consoles that connect a controller or embedded computer to debugging, programming, or configuration equipment over RS-232. Its 250 kbit/s operating rate is sufficient for terminal sessions and low-bandwidth diagnostic traffic, while the 3 V to 5.5 V supply range supports both 3.3 V and 5 V system rails. Two drivers and two receivers allow bidirectional communication on one interface IC. Place the four 0.1 µF charge-pump capacitors close to their pins and route the RS-232 ground as a controlled return path to minimize susceptibility to cable-borne noise.
推薦
Data Acquisition Equipment
MAX3232IDB can connect laboratory and industrial data-acquisition equipment to a legacy RS-232 controller. The dual-driver, dual-receiver arrangement reduces the number of interface ICs needed when command traffic flows in both directions. Operation up to 250 kbit/s supports moderate-rate configuration and status protocols rather than continuous high-volume sensor streaming. Its 300 µA typical supply current is useful in compact instruments, while 5 V logic compatibility simplifies interfaces to older controller hardware. External charge-pump capacitors and exposed serial pins still require careful placement to maintain signal and ESD performance.
推薦
Barcode and Identification Equipment
The MAX3232IDB is appropriate for barcode scanners, identification terminals, and handheld equipment that exchange commands and status data with a host through RS-232. The 250 kbit/s rate is more than adequate for short transaction packets, and the two-channel implementation can support separate transmit and receive paths. A 3.3 V embedded processor can operate the transceiver from a suitable rail while the charge pump supplies the bipolar RS-232 levels. The ±15 kV ESD rating strengthens the serial interface, but designers should still add connector-side protection when cables leave the enclosure or cross industrial ground domains.
推薦
Point-of-Sale Terminal
MAX3232IDB can bridge a point-of-sale terminal or peripheral to an RS-232 printer, scanner, or service connector. The 250 kbit/s maximum data rate comfortably supports short command and receipt-transfer protocols, and the two drivers and receivers provide bidirectional communication without multiple interface packages. Its 3 V to 5.5 V supply operation allows integration with mixed legacy and newer logic systems. The SSOP-16 footprint helps preserve board area, although charge-pump capacitor placement should remain close to the IC. Add system grounding and appropriate protection at any user-accessible connector.
推薦
Embedded Instrumentation
The MAX3232IDB suits embedded instrumentation that reports measurements, accepts calibration commands, or connects to laboratory test equipment through RS-232. The 250 kbit/s data rate is appropriate for command-oriented traffic, and the device’s 300 µA typical supply current helps when the instrument operates from a constrained power budget. Two receivers can monitor separate incoming signals when the protocol permits, while two drivers support independent outbound channels. The commercial 0 °C to 70 °C range must be checked against the instrument environment. Keep charge-pump loops compact and isolate noisy analog or switching sections from the serial interface.
推薦
Legacy Computer Connectivity
MAX3232IDB provides a straightforward bridge between modern low-voltage embedded logic and legacy RS-232 equipment such as printers, programmers, service tools, and older computers. Its 3 V to 5.5 V supply range allows the digital side to operate from 3.3 V or 5 V while the on-board charge pump generates the bipolar levels required at the line interface. The 250 kbit/s rate is suitable for legacy control traffic. Its 5 V logic compatibility broadens system options, but UART baud-rate accuracy and cable limitations remain system-level considerations. The ±15 kV ESD protection improves robustness at the serial pins.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232IDB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232EIPW | MAX3232IPW | MAX3232CDB | MAX3232EIDBR | MAX3222IDBR |
|---|---|---|---|---|---|---|
| Package | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Family | MAX3232 | MAX3232E | MAX3232 | MAX3232 | MAX3232E | MAX3222 |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Replacement Relationship | Original MAX3232 family device | Improved MAX3232E-family option | Same-family ordering option | Same-family ordering option | Manufacturer identifies MAX3232E as improved drop-in replacement | Related MAX3222-family dual transceiver |
主要差異化特點
- Manufacturer-backed improved replacement path (對比MAX3232EIDBR)
- Dual communication channels in one package (對比MAX202CDR)
- Defined commercial temperature range (對比MAX3232EIPW)
- RS-232 speed aligned with control and diagnostic links (對比MAX3222IDBR)
設計說明
Place the four required 0.1 µF charge-pump capacitors close to the corresponding MAX3232IDB pins, with short, symmetrical connections and a direct return to the device ground. Avoid routing the charge-pump loop beneath the package or across sensitive analog inputs. Confirm capacitor voltage rating, dielectric, and tolerance against the manufacturer datasheet before release because these capacitors participate in generating the bipolar RS-232 output levels.
Keep the RS-232 driver and receiver routes away from clocks, switching-node copper, relay contacts, and high-impedance sensor inputs. Maintain a continuous signal-ground reference where the interface cable requires it, while following the system’s chassis-ground strategy to avoid forcing surge current through sensitive logic ground. The on-chip ±15 kV ESD protection should be complemented by connector placement and external protection when the cable is externally accessible.
Do not substitute a generic RS-232 transceiver solely because it has two drivers and two receivers. Verify the SSOP-16 pin assignment, capacitor-pin arrangement, supply range, logic thresholds, receiver topology, and exact ordering suffix. The manufacturer identifies MAX3232E as an improved direct replacement for MAX3232, but every production substitution should still be checked against the exact source and destination datasheets before PCB release.
Treat the 250 kbit/s figure as the maximum device capability rather than the required UART operating rate. UART baud-rate error, protocol framing, cable length, connector wiring, and receiver noise margin can reduce reliable system throughput. Confirm the complete interface under worst-case temperature and supply conditions, especially when the serial link crosses noisy industrial ground domains or uses long unshielded cables.
合規資訊
The MAX3232IDB is identified as RoHS compliant with an MSL 1, 260 °C unlimited floor-life classification. No automotive qualification or additional environmental compliance claim is made for this commercial-temperature device.