MAX3488AEGSA+T 20Mbps RS-485 Transceiver | Analog Devices
MPN: MAX3488AEGSA+T ✓ ActiveMAX3488AEGSA+T Overview
An RS-485 transceiver is an interface IC that converts logic-level signals into differential RS-485 signals and converts received differential signals back into CMOS-compatible digital levels. Within the interface hierarchy, MAX3488AEGSA+T belongs to the RS-485/RS-422 transceiver class, which supports longer cables and greater noise immunity than single-ended communication. It is used where robust point-to-point or multipoint data links are required.
The 3.3 V supply operation suits modern industrial, telecommunications, and embedded control systems. Its 20 Mbps maximum signaling rate supports faster industrial links than the lower-rate members of the MAX348x family. The ±20 kV ESD rating protects exposed bus pins from electrostatic discharge, while slew-rate-limited operation reduces high-frequency EMI and edge-rate stress associated with rapidly switching cable drivers.
Each device contains a differential driver and a differential receiver. The receiver can typically operate with a logic-level enable control, while the transmitter uses a separate enable control for bus-direction management. This arrangement permits a compact interface containing both signaling directions without relying on an external transceiver. The SOIC-8 package also provides a standard surface-mount footprint suitable for production PCB assembly.
Typical applications include industrial-control networks, factory automation equipment, telecommunications equipment, instrumentation links, and EMI-sensitive RS-485 or RS-422 buses. The MAX3488AEGSA+T is particularly appropriate when the design requires a low-voltage 3.3 V interface, high maximum data rate, and enhanced ESD protection without introducing a separate external protection network for every exposed bus terminal.
Designers should follow the manufacturer's pin-description and application-circuit guidance when assigning driver-enable and receiver-enable functions. The PCB should preserve a continuous return path between the transceiver and connector ground, and external protection or termination components should be selected according to cable length, topology, data rate, and grounding requirements rather than inferred from the transceiver's ESD rating alone.
This product page combines the manufacturer's interface description, exact orderable MPN information, package details, application guidance, parameter comparisons, and practical PCB considerations into a design-oriented reference. It highlights where the MAX3488AEGSA+T fits within the MAX348x transceiver family and the engineering checks that should be completed before assigning it to a new RS-485 or RS-422 link.
Drop-in alternatives for MAX3488AEGSA+T — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
MAX3488AEASA+T
✅ Drop-InContact for price
View Datasheet →MAX3488AEGSA+T Specifications
| Product Type | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Maximum Data Rate | 20 Mbps |
| ESD Protection | ±20 kV |
| Driver Count | 1 |
| Receiver Count | 1 |
| Supported Standards | RS-422 and RS-485 |
| Driver Slew Rate | Slew-rate limited |
| Package | 8-pin SOIC |
| Package Type | NSOIC-8 |
| Mounting Type | Surface mount |
| Ordering Suffix | +T tape-and-reel |
MAX3488AEGSA+T nsoic-8 Pin Configuration Guide
Pin configuration for MAX3488AEGSA+T (nsoic-8 package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MAX3488AEGSA+T.
Refer to the datasheet for full pin configuration.
Typical Applications
MAX3488AEGSA+T is suitable for 6 applications: Industrial Control Networks, Factory Automation Equipment, Telecommunications Equipment, EMI-Sensitive Differential Links, Instrumentation and Test Systems, Embedded Controller RS-485 Ports.
Industrial Control Networks
The MAX3488AEGSA+T fits industrial-control links that require a 3.3 V RS-485 or RS-422 interface and a maximum signaling rate of 20 Mbps. Its differential signaling improves noise immunity compared with single-ended communication, while the slew-rate-limited driver helps control cable-edge energy. The ±20 kV ESD rating adds protection at the transceiver, although the complete installation may still require surge protection. Place the device near the field connector and route its differential pair over continuous ground to preserve signal integrity.
Recommended
Factory Automation Equipment
Factory automation controllers can use the MAX3488AEGSA+T for robust communication with remote sensors, actuators, and programmable controllers over RS-485 or RS-422. The 3.0 V to 3.6 V operating range integrates naturally with 3.3 V embedded logic, and the 20 Mbps limit supports high-speed short links. Slew-rate-limited edge rates reduce EMI sensitivity in cabinets containing relays, motor drives, and switching power converters. Keep the bus traces short, establish a reliable equipment ground, and determine termination from the cable topology rather than applying it indiscriminately to every node.
Recommended
Telecommunications Equipment
The MAX3488AEGSA+T is appropriate for 3.3 V telecommunications equipment that exchanges control or status data over a differential RS-485 or RS-422 link. Its 20 Mbps maximum data rate accommodates short, high-speed backplanes or inter-equipment links, and the integrated ±20 kV ESD protection helps manage electrostatic discharge at accessible interfaces. The 8-pin SOIC package simplifies assembly in dense communication products. Designers should separate the differential pair from high-energy switching paths and verify that the connector shield, chassis, and logic ground strategy satisfy the installation's EMC requirements.
Recommended
EMI-Sensitive Differential Links
The MAX3488AEGSA+T is useful where a low-voltage logic system must communicate over a cable in an electrically noisy environment. The differential receiver rejects common-mode noise, the slew-rate-limited driver controls transition steepness, and the ±20 kV ESD capability strengthens the interface against electrostatic discharge. These characteristics are especially helpful around motor controls, power converters, and long external cables. The layout should use a tightly coupled differential pair, provide an uninterrupted reference plane, and use the manufacturer's recommended termination and protection arrangements for the specific cable and grounding topology.
Recommended
Instrumentation and Test Systems
Instrumentation systems can use the MAX3488AEGSA+T to connect a 3.3 V controller to remote measurement modules over RS-485 or RS-422. The device's 20 Mbps capability supports short high-rate instrument links, while differential reception provides better noise tolerance than a single-ended interface. The integrated ESD protection is valuable where cables connect to external equipment, but it does not by itself specify the system-level surge withstand required by every installation. Keep the analog and digital grounds under deliberate control and route the bus directly between the transceiver and protected connector interface.
Recommended
Embedded Controller RS-485 Ports
The MAX3488AEGSA+T can add a differential communication port to a 3.3 V embedded controller with separate transmit and receive control. The one-driver, one-receiver organization supports half-duplex bus operation when the receiver and transmitter enables are managed correctly, or full-duplex wiring when the interface requires independent directions. Its 20 Mbps maximum rate allows a single transceiver family to serve fast local links. Validate enable polarity and bus contention behavior against the manufacturer's truth tables, and ensure the software avoids transmitting while another node owns the bus.
Recommended
Recommended Products Summary
Engineering reference data for MAX3488AEGSA+T — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MAX3488AEASA+T |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC |
| Interface Type | RS-485/RS-422 | RS-485/RS-422 |
| Nominal Supply Voltage | 3.3 V | 3.3 V |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Maximum Data Rate | 20 Mbps | 20 Mbps |
| ESD Protection | ±20 kV | ±20 kV |
| Driver and Receiver Count | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Driver Slew Rate | Slew-rate limited | Slew-rate limited |
| Ordering Suffix | +T tape-and-reel | +T tape-and-reel |
Key Differentiators
- High-speed 3.3 V differential interface (vs MAX3488AEASA+T)
- Integrated high-level ESD protection (vs MAX3488AEASA+T)
- Controlled cable transitions (vs MAX3488AEASA+T)
Design Notes
Place the MAX3488AEGSA+T close to the RS-485 or RS-422 connector and route the differential pair as a tightly coupled trace pair over a continuous ground reference. Keep the driver outputs and receiver inputs away from clocks, relays, switch-mode inductors, and other high-current paths. If protection components are required, place them at the connector boundary so surge or discharge current is diverted before reaching the transceiver pins.
Do not treat the ±20 kV ESD rating as a complete industrial surge-protection solution. Select external protection using the cable length, exposure, grounding topology, and required surge withstand. Preserve the differential pair geometry through the protection network, and connect the interface reference ground to the equipment ground according to the manufacturer's application guidance. Poor ground continuity can reduce the practical benefit of a high-rated transceiver.
Avoid connecting multiple drivers to the same bus segment unless the design intentionally implements a controlled fail-safe arrangement. Confirm receiver-enable and driver-enable polarity against the MAX3488AEGSA+T truth tables before writing firmware. The 20 Mbps value is a device-level maximum; usable distance also depends on termination, cable impedance, node spacing, topology, and external protection.
Use termination appropriate to the physical bus rather than adding it solely because the transceiver is slew-rate limited. Maintain a continuous reference plane beneath the differential route, minimize stubs, and avoid sharing the bus pair with unrelated digital traffic. For long or noisy installations, validate signal integrity with the actual cable, connectors, protection components, common-mode range, and transceiver loading.
Compliance Information
The MAX3488AEGSA+T is an interface IC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-mineral status require confirmation from the current manufacturer product documentation or declaration for the exact orderable code.