Analog Devices

MAX3488AEGSA+T 20Mbps RS-485 Transceiver | Analog Devices

MPN: MAX3488AEGSA+T ✓ نشط
3.0 V to 3.6 V Vdss RS-422 and RS-485 Rds(on) 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

MAX3488AEGSA+T نظرة عامة

The Analog Devices MAX3488AEGSA+T is a 3.3 V-powered RS-485/RS-422 interface transceiver with a maximum data rate of 20 Mbps, ±20 kV ESD protection, and slew-rate-limited drivers. It is packaged in an 8-pin SOIC and uses a +T suffix for tape-and-reel ordering. The device provides one driver and one receiver for bidirectional differential bus communication.

An RS-485 transceiver is an interface IC that converts logic-level signals into differential RS-485 signals and converts received differential signals back into CMOS-compatible digital levels. Within the interface hierarchy, MAX3488AEGSA+T belongs to the RS-485/RS-422 transceiver class, which supports longer cables and greater noise immunity than single-ended communication. It is used where robust point-to-point or multipoint data links are required.

The 3.3 V supply operation suits modern industrial, telecommunications, and embedded control systems. Its 20 Mbps maximum signaling rate supports faster industrial links than the lower-rate members of the MAX348x family. The ±20 kV ESD rating protects exposed bus pins from electrostatic discharge, while slew-rate-limited operation reduces high-frequency EMI and edge-rate stress associated with rapidly switching cable drivers.

Each device contains a differential driver and a differential receiver. The receiver can typically operate with a logic-level enable control, while the transmitter uses a separate enable control for bus-direction management. This arrangement permits a compact interface containing both signaling directions without relying on an external transceiver. The SOIC-8 package also provides a standard surface-mount footprint suitable for production PCB assembly.

Typical applications include industrial-control networks, factory automation equipment, telecommunications equipment, instrumentation links, and EMI-sensitive RS-485 or RS-422 buses. The MAX3488AEGSA+T is particularly appropriate when the design requires a low-voltage 3.3 V interface, high maximum data rate, and enhanced ESD protection without introducing a separate external protection network for every exposed bus terminal.

Designers should follow the manufacturer's pin-description and application-circuit guidance when assigning driver-enable and receiver-enable functions. The PCB should preserve a continuous return path between the transceiver and connector ground, and external protection or termination components should be selected according to cable length, topology, data rate, and grounding requirements rather than inferred from the transceiver's ESD rating alone.

This product page combines the manufacturer's interface description, exact orderable MPN information, package details, application guidance, parameter comparisons, and practical PCB considerations into a design-oriented reference. It highlights where the MAX3488AEGSA+T fits within the MAX348x transceiver family and the engineering checks that should be completed before assigning it to a new RS-485 or RS-422 link.

بدائل مباشرة لـ MAX3488AEGSA+T — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MAX3488AEASA+T

✅ بديل مباشر
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · Analog Devices / Maxim Integrated · 3.3 V · 20 Mbps · 20 kV · 1 driver · 1 receiver · RS-422 and RS-485

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX3488AEGSA+T المواصفات

Product Type RS-485/RS-422 transceiver
Supply Voltage Range 3.0 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Data Rate 20 Mbps
ESD Protection ±20 kV
Driver Count 1
Receiver Count 1
Supported Standards RS-422 and RS-485
Driver Slew Rate Slew-rate limited
العلبة 8-pin SOIC
Package Type NSOIC-8
نوع التركيب Surface mount
Ordering Suffix +T tape-and-reel

دليل تكوين أطراف MAX3488AEGSA+T nsoic-8

تكوين الأطراف لـ MAX3488AEGSA+T (حزمة nsoic-8). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة nsoic-8 لـ MAX3488AEGSA+T

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3488AEGSA+T.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX3488AEGSA+T مناسب لـ 6 التطبيقs: Industrial Control Networks, Factory Automation Equipment, Telecommunications Equipment, EMI-Sensitive Differential Links, Instrumentation and Test Systems, Embedded Controller RS-485 Ports.

🏭

Industrial Control Networks

The MAX3488AEGSA+T fits industrial-control links that require a 3.3 V RS-485 or RS-422 interface and a maximum signaling rate of 20 Mbps. Its differential signaling improves noise immunity compared with single-ended communication, while the slew-rate-limited driver helps control cable-edge energy. The ±20 kV ESD rating adds protection at the transceiver, although the complete installation may still require surge protection. Place the device near the field connector and route its differential pair over continuous ground to preserve signal integrity.

🏭

Factory Automation Equipment

Factory automation controllers can use the MAX3488AEGSA+T for robust communication with remote sensors, actuators, and programmable controllers over RS-485 or RS-422. The 3.0 V to 3.6 V operating range integrates naturally with 3.3 V embedded logic, and the 20 Mbps limit supports high-speed short links. Slew-rate-limited edge rates reduce EMI sensitivity in cabinets containing relays, motor drives, and switching power converters. Keep the bus traces short, establish a reliable equipment ground, and determine termination from the cable topology rather than applying it indiscriminately to every node.

🌐

Telecommunications Equipment

The MAX3488AEGSA+T is appropriate for 3.3 V telecommunications equipment that exchanges control or status data over a differential RS-485 or RS-422 link. Its 20 Mbps maximum data rate accommodates short, high-speed backplanes or inter-equipment links, and the integrated ±20 kV ESD protection helps manage electrostatic discharge at accessible interfaces. The 8-pin SOIC package simplifies assembly in dense communication products. Designers should separate the differential pair from high-energy switching paths and verify that the connector shield, chassis, and logic ground strategy satisfy the installation's EMC requirements.

📻

EMI-Sensitive Differential Links

The MAX3488AEGSA+T is useful where a low-voltage logic system must communicate over a cable in an electrically noisy environment. The differential receiver rejects common-mode noise, the slew-rate-limited driver controls transition steepness, and the ±20 kV ESD capability strengthens the interface against electrostatic discharge. These characteristics are especially helpful around motor controls, power converters, and long external cables. The layout should use a tightly coupled differential pair, provide an uninterrupted reference plane, and use the manufacturer's recommended termination and protection arrangements for the specific cable and grounding topology.

🖥️

Instrumentation and Test Systems

Instrumentation systems can use the MAX3488AEGSA+T to connect a 3.3 V controller to remote measurement modules over RS-485 or RS-422. The device's 20 Mbps capability supports short high-rate instrument links, while differential reception provides better noise tolerance than a single-ended interface. The integrated ESD protection is valuable where cables connect to external equipment, but it does not by itself specify the system-level surge withstand required by every installation. Keep the analog and digital grounds under deliberate control and route the bus directly between the transceiver and protected connector interface.

🔧

Embedded Controller RS-485 Ports

The MAX3488AEGSA+T can add a differential communication port to a 3.3 V embedded controller with separate transmit and receive control. The one-driver, one-receiver organization supports half-duplex bus operation when the receiver and transmitter enables are managed correctly, or full-duplex wiring when the interface requires independent directions. Its 20 Mbps maximum rate allows a single transceiver family to serve fast local links. Validate enable polarity and bus contention behavior against the manufacturer's truth tables, and ensure the software avoids transmitting while another node owns the bus.

ملخص المنتجات الموصى بها

MAX3488AEGSA+ Analog Devices يُستخدم في: Industrial Control Networks, EMI-Sensitive Differential Links, Embedded Controller RS-485 Ports MAX3490AE Analog Devices 3.3 V RS-485/RS-422 family device يُستخدم في: Industrial Control Networks, Telecommunications Equipment, Instrumentation and Test Systems MAX3488AEASA+T Analog Devices يُستخدم في: Factory Automation Equipment, EMI-Sensitive Differential Links MAX3485AE Analog Devices 3.3 V differential transceiver يُستخدم في: Factory Automation Equipment, Instrumentation and Test Systems MAX3483AE Analog Devices 3.3 V RS-485/RS-422 family device يُستخدم في: Telecommunications Equipment, Embedded Controller RS-485 Ports
What are the key specifications of MAX3488AEGSA+T?
The MAX3488AEGSA+T is a 3.3 V RS-485/RS-422 transceiver rated for operation from 3.0 V to 3.6 V, with a maximum data rate of 20 Mbps. It contains one driver and one receiver, provides ±20 kV ESD protection, and uses slew-rate-limited drivers. According to the Analog Devices datasheet, the device is intended for low-power differential communication systems and is offered in an 8-pin SOIC package.
What is MAX3488AEGSA+T and what does it do?
The MAX3488AEGSA+T converts logic-level signals into differential RS-485 or RS-422 bus signals and converts received differential signals back into digital levels. Its one-driver, one-receiver arrangement supports bidirectional differential communication from a single 8-pin SOIC device. According to the Analog Devices product documentation, the interface is powered from a 3.3 V supply and includes slew-rate-limited drivers for controlled cable transitions.
What is the operating voltage of MAX3488AEGSA+T?
The MAX3488AEGSA+T operates from 3.0 V to 3.6 V, with 3.3 V as its nominal supply voltage. According to the Analog Devices datasheet, the MAX3488 family is designed for low-power, 3.3 V RS-485 and RS-422 interfaces. The system designer must keep the transceiver supply within the stated range and account for tolerance, ripple, and sequencing at the device and connector interfaces.
What is the maximum data rate of MAX3488AEGSA+T?
The MAX3488AEGSA+T supports a maximum data rate of 20 Mbps. The Analog Devices datasheet identifies it as a 20 Mbps, slew-rate-limited RS-485/RS-422 transceiver. Actual usable link distance and error-free operation still depend on cable type, topology, termination, transceiver loading, signal integrity, and the data pattern; the 20 Mbps figure should therefore be treated as the device limit rather than a guaranteed distance.
Where can I download the MAX3488AEGSA+T datasheet PDF?
The MAX3488AEGSA+T datasheet is available through the official Analog Devices MAX3488 product page and its linked data-sheet documentation. The manufacturer page identifies the MAX3488 family's 3.3 V RS-485/RS-422 operation, slew-rate limiting, and related model options. Use the linked manufacturer document for the authoritative pin descriptions, electrical characteristics, test conditions, and recommended application circuits.
Where can I find the MAX3488AEGSA+T pinout?
Use the pin-description table and package drawing in the Analog Devices MAX3488 data sheet to locate the MAX3488AEGSA+T connections. The component uses an 8-pin SOIC, designated NSOIC-8 in the ordering information. Pay particular attention to the supply, ground, driver inputs, driver outputs, receiver input, receiver output, and enable pins when assigning the footprint.
Does MAX3488AEGSA+T need external RS-485 protection?
The MAX3488AEGSA+T includes ±20 kV ESD protection on the communication interface, but that rating does not replace every external protection requirement. The Analog Devices data sheet should be used to determine which pins receive the stated ESD rating. Long exposed cables, severe industrial transients, or coordinated-system surge requirements may still call for additional surge protection selected for the installation.
Is MAX3488AEGSA+T suitable for industrial-control networks?
Yes, the MAX3488AEGSA+T is suitable for industrial-control and communications links requiring a 3.3 V RS-485 or RS-422 interface. Its 20 Mbps maximum data rate, slew-rate-limited driver, and ±20 kV ESD protection support modern differential buses. The Analog Devices application information specifically identifies industrial-control networks and telecommunications equipment as suitable application areas.
What can replace MAX3488AEGSA+T?
A replacement should use the same 8-pin SOIC footprint and provide compatible RS-485/RS-422 driver and receiver functions. The closest same-manufacturer family alternative identified is the MAX3488AEASA+T, while a generic cross-reference match such as SN75HVD12DR requires careful verification because its transceiver architecture and timing may differ. Confirm supply range, enable polarity, bus topology, data rate, and every pin before approving a substitution.
Is MAX3488AEGSA+T the same as MAX3488AEASA+T?
No, the order codes are related but should not be treated as identical without checking the temperature-grade and ordering details. The MAX3488AEGSA+T is the target E-grade 8-pin SOIC ordering code, while MAX3488AEASA+T belongs to the related AEA grade. Both appear in the same MAX3488AE family, but the manufacturer's selection table must be consulted to confirm operating-temperature and production suitability.
When should I choose MAX3488AEGSA+T instead of a lower-speed transceiver?
Choose the MAX3488AEGSA+T when the interface must support data rates up to 20 Mbps while retaining a 3.3 V supply, slew-rate-limited drive, and ±20 kV ESD protection. A lower-speed transceiver may be preferable when the bus operates at reduced rates and offers system-level benefits elsewhere. The decision should reflect the actual link budget, node count, cable length, termination, and EMC requirements.
What is the best Analog Devices equivalent for MAX3488AEGSA+T?
The MAX3488AEASA+T is the closest identified Analog Devices family alternative because it uses the related MAX3488AE 8-pin SOIC product family. Its suitability as a drop-in replacement depends on confirming temperature grade, enable behavior, supply range, and electrical limits in the manufacturer selection table. Treat it as a qualified same-family candidate rather than an automatic substitute.
Where to buy MAX3488AEGSA+T online?
Use the Request a Quote form on this page to request MAX3488AEGSA+T availability, current commercial terms, and the appropriate +T tape-and-reel configuration. The orderable part includes the MAX3488AEGSA base device and +T packaging suffix, so confirm that any quotation uses the exact suffix and the 8-pin SOIC package rather than a related temperature-grade code.
What is the price of MAX3488AEGSA+T?
Current commercial pricing for MAX3488AEGSA+T should be requested through the Request a Quote form on this page. The quote should identify the exact MPN, quantity, 3.3 V RS-485/RS-422 transceiver configuration, 8-pin SOIC package, and +T tape-and-reel suffix. Requesting the exact orderable code helps prevent mismatches with the related MAX3488AE family variants.
What is the lead time and stock status of MAX3488AEGSA+T?
Current stock, lead time, and minimum order quantity for MAX3488AEGSA+T should be confirmed through the Request a Quote form on this page. The Analog Devices MAX3488 product page identifies the MAX3488 as a production device, but production status alone does not establish current inventory for every package and ordering suffix. Include the required quantity and reel format in the request.
How should a MAX3488AEGSA+T RS-485 PCB be laid out?
Place the transceiver close to the bus connector and route the differential pair as a tightly coupled pair over a continuous ground reference. Keep the driver outputs and receiver inputs away from unrelated clocks, switching nodes, and digital return currents. Follow the Analog Devices application guidance for termination, common-mode considerations, protection components, and connector ground connections.

بيانات مرجعية هندسية لـ MAX3488AEGSA+T — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MAX3488AEGSA+T when the design needs a 3.3 V RS-485/RS-422 transceiver with a 20 Mbps maximum data rate, ±20 kV ESD protection, slew-rate-limited drive, and an 8-pin SOIC footprint. The MAX3488AEASA+T is the closest identified Analog Devices family alternative and may fit the same board, but its temperature-grade ordering code must be checked against the installation requirements before substitution. If the actual bus runs at a substantially lower rate, a slower member of the MAX348x family may provide a better system fit. Confirm enable polarity, bus topology, common-mode limits, external protection, and the manufacturer's pin assignments before releasing the PCB.

المقارنة مع البدائل

المعامل هذا المنتج MAX3488AEASA+T
Brand Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC
Interface Type RS-485/RS-422 RS-485/RS-422
Nominal Supply Voltage 3.3 V 3.3 V
Supply Voltage Range 3.0 V to 3.6 V 3.0 V to 3.6 V
Maximum Data Rate 20 Mbps 20 Mbps
ESD Protection ±20 kV ±20 kV
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver
Driver Slew Rate Slew-rate limited Slew-rate limited
Ordering Suffix +T tape-and-reel +T tape-and-reel

أبرز الفروقات

  • High-speed 3.3 V differential interface (مقابلMAX3488AEASA+T)
  • Integrated high-level ESD protection (مقابلMAX3488AEASA+T)
  • Controlled cable transitions (مقابلMAX3488AEASA+T)

ملاحظات التصميم

Place the MAX3488AEGSA+T close to the RS-485 or RS-422 connector and route the differential pair as a tightly coupled trace pair over a continuous ground reference. Keep the driver outputs and receiver inputs away from clocks, relays, switch-mode inductors, and other high-current paths. If protection components are required, place them at the connector boundary so surge or discharge current is diverted before reaching the transceiver pins.

Do not treat the ±20 kV ESD rating as a complete industrial surge-protection solution. Select external protection using the cable length, exposure, grounding topology, and required surge withstand. Preserve the differential pair geometry through the protection network, and connect the interface reference ground to the equipment ground according to the manufacturer's application guidance. Poor ground continuity can reduce the practical benefit of a high-rated transceiver.

Avoid connecting multiple drivers to the same bus segment unless the design intentionally implements a controlled fail-safe arrangement. Confirm receiver-enable and driver-enable polarity against the MAX3488AEGSA+T truth tables before writing firmware. The 20 Mbps value is a device-level maximum; usable distance also depends on termination, cable impedance, node spacing, topology, and external protection.

Use termination appropriate to the physical bus rather than adding it solely because the transceiver is slew-rate limited. Maintain a continuous reference plane beneath the differential route, minimize stubs, and avoid sharing the bus pair with unrelated digital traffic. For long or noisy installations, validate signal integrity with the actual cable, connectors, protection components, common-mode range, and transceiver loading.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The MAX3488AEGSA+T is an interface IC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-mineral status require confirmation from the current manufacturer product documentation or declaration for the exact orderable code.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX3488AEGSA+T datasheet MAX3488AEGSA+T pinout MAX3488AEGSA+T datasheet pdf MAX3488AEGSA+T specifications MAX3488AEGSA+T SOIC-8 MAX3488AEGSA+T RS-485 transceiver MAX3488AEGSA+T equivalent MAX3488AEGSA+T replacement MAX3488AEGSA+T vs MAX3488AEASA+T MAX3488AEGSA+T application circuit MAX3488AEGSA+T price MAX3488AEGSA+T stock Analog Devices MAX3488AEGSA+T MAX3488AEGSA+T 20Mbps MAX3488AEGSA+T industrial control

المكونات والمصطلحات ذات الصلة

Analog Devices MAX3488AEGSA+T MAX3488AEASA+T MAX3488AEGSA+ MAX3485AE MAX3483AE MAX3490AE RS-485 transceiver RS-422 transceiver differential line driver differential receiver interface IC semiconductor 3.3 V transceiver 20 Mbps data rate ±20 kV ESD protection slew-rate-limited driver SOIC-8 NSOIC-8 surface-mount package industrial-control network factory automation telecommunications equipment EMI-sensitive communication differential signaling
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر