MAX399CPE+ - Dual 4:1 Analog Multiplexer | Analog Devices
MPN: MAX399CPE+ ✓ ActiveMAX399CPE+ Overview
An analog multiplexer is an interface IC that connects one signal source to one of several destinations using digital control inputs. The MAX399 family belongs to the broader CMOS analog-switch and signal-routing hierarchy. Each internal switch provides four selectable inputs, and the two switches can be operated independently, making the device useful for channel selection, signal routing, test systems, and precision measurement front ends.
Key features include dual 4:1 configuration, low-voltage CMOS operation, 100-ohm nominal on-resistance, on-resistance matching within 6 ohms, and a maximum on-resistance of 11 ohms. The two-circuit architecture allows a board to multiplex two analog channels concurrently. The 16-pin PDIP package also provides through-hole mechanical compatibility with conventional perforated-board and through-hole PCB designs.
The MAX399CPE+ uses digital select logic to connect one of four inputs in each switch section to its common output. Its monolithic CMOS implementation is intended for precision signal routing, where consistent resistance between channels is important for minimizing gain error and channel-dependent measurement variation. Because this is a passive switching function, power consumption, switching speed, bandwidth, supply voltage, and logic thresholds remain central considerations when integrating the device.
Typical uses include multiplexed sensor acquisition, instrumentation signal routing, automated test equipment, sample-and-hold front ends, data acquisition systems, and analog measurement boards. In a two-axis or redundant-channel acquisition circuit, the two independent switch sections can route separate analog inputs simultaneously, reducing the number of external analog switches required.
Designers should verify the supply voltage, control-logic levels, signal-range limits, switching time, bandwidth, leakage, and absolute maximum ratings in the manufacturer datasheet before finalizing a circuit. Keep routed analog traces short, provide a stable ground reference, and place bypass capacitance close to the supply pins when the device operates from a supply rail.
This product page combines the exact MAX399CPE+ configuration with practical selection guidance, verified interface characteristics, application-oriented design notes, and a conservative comparison of documented drop-in alternatives. It is intended to help engineers identify whether the 16-pin dual 4:1 multiplexer fits their signal-routing requirements before requesting a quotation.
Drop-in alternatives for MAX399CPE+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
MAX399CPE
✅ Drop-In📋 Reference alternative (not in catalog)
MAX399CPE+ Specifications
| Product Type | Precision CMOS analog multiplexer |
| Number of Switch Circuits | 2 circuits |
| Multiplexer Configuration | Dual 4:1 |
| Total Number of Inputs | 8 analog inputs |
| Number of Common Outputs | 2 analog outputs |
| Nominal On-Resistance | 100 ohm |
| Maximum On-Resistance | 11 ohm |
| On-Resistance Matching Between Channels | 6 ohm maximum |
| Technology | CMOS |
| Supply Classification | Low voltage |
| Package | 16-pin PDIP |
| Pin Count | 16 pins |
| Mounting Type | Through hole |
| Package Code | PDIP |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Surface Mount | No |
MAX399CPE+ rectangular Pin Configuration Guide
Pin configuration for MAX399CPE+ (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MAX399CPE+.
Refer to the datasheet for full pin configuration.
Typical Applications
MAX399CPE+ is suitable for 6 applications: Multiplexed Sensor Acquisition, Precision Test Equipment, Data Acquisition Front Ends, Instrument Signal Routing, Sample-and-Hold Signal Conditioning, Industrial Control Signal Selection.
Multiplexed Sensor Acquisition
The MAX399CPE+ is well suited to front ends that select among several analog sensor outputs. Each independent 4:1 section can connect one of four sensor signals to its common output, while the second section can acquire a complementary or redundant channel. The documented 6-ohm on-resistance matching and 11-ohm maximum on-resistance help constrain channel-dependent errors in precision measurements. Engineers should still include the switch resistance in the sensor and amplifier input budget and verify settling time against the acquisition rate.
Recommended
Precision Test Equipment
In automated test equipment, the MAX399CPE+ can route several test stimuli or measurement inputs through a shared analog path. Its two 4:1 sections allow two channels to be selected concurrently, reducing the number of separate analog routing devices needed on a board. Channel matching within 6 ohms is useful when maintaining similar source impedance and gain across different test points. Calibration should account for the actual on-resistance, leakage, settling behavior, and the leakage of surrounding circuitry.
Recommended
Data Acquisition Front Ends
The MAX399CPE+ supports compact data-acquisition front ends that must sample several physical channels with one analog measurement chain. Eight inputs can be presented through two independently selected outputs, allowing paired or interleaved measurements without duplicating the entire analog chain. The 100-ohm nominal on-resistance makes source-impedance effects relevant, so the receiving amplifier should have suitable input impedance and the system should include calibration for channel resistance variation.
Recommended
Instrument Signal Routing
The MAX399CPE+ can simplify analog signal routing in measurement instruments that monitor multiple inputs but share an amplifier, converter, or display channel. The dual 4:1 organization provides eight selectable inputs while preserving two parallel paths. Because the device is implemented in low-voltage CMOS, its supply requirements and logic thresholds must be compatible with the surrounding instrument. Confirm the permitted signal range, bandwidth, switching time, and off-state behavior before using it with high-impedance sources.
Recommended
Sample-and-Hold Signal Conditioning
The MAX399CPE+ can select among multiple conditioned analog inputs before a sample-and-hold stage in laboratory and industrial signal-conditioning equipment. Selecting one of four signals per section permits rapid comparison of reference, measurement, or calibration nodes while a common acquisition circuit processes the result. The maximum 11-ohm on-resistance and 6-ohm channel matching are helpful for gain consistency, but sampling accuracy also depends on source impedance, capacitor selection, leakage, and the time allowed for the switch to settle.
Recommended
Industrial Control Signal Selection
The MAX399CPE+ is applicable to industrial control and monitoring boards that must select among multiple low-level analog inputs using digital control signals. Its two independent 4:1 switch sections can manage paired feedback or monitoring channels while keeping the routing component count low. Industrial designs must provide clean supply bypassing, maintain a low-impedance ground reference, and separate control traces from analog paths. Verify the device ratings against the factory environment and the electrical limits of the connected sensors.
Recommended
Recommended Products Summary
Engineering reference data for MAX399CPE+ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MAX399CPE |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP |
| Multiplexer Configuration | Dual 4:1 | Dual 4:1 |
| Number of Switch Circuits | 2 circuits | 2 circuits |
| Nominal On-Resistance | 100 ohm | 100 ohm |
| Maximum On-Resistance | 11 ohm | 11 ohm |
| On-Resistance Matching Between Channels | 6 ohm maximum | 6 ohm maximum |
| Technology | Low-voltage CMOS | Low-voltage CMOS |
| Temperature Grade | Commercial | Commercial |
| Mounting Type | Through hole | Through hole |
Key Differentiators
- Two independent 4:1 analog paths in one package (vs MAX399CPE)
- Tight channel-to-channel resistance matching (vs MAX399CPE)
- Through-hole 16-pin PDIP implementation (vs MAX399CPE)
Design Notes
Route each analog input and common output as a short trace directly to the relevant MAX399CPE+ pin. Keep the select traces away from sensitive analog conductors, avoid sharing high-current return paths with the analog inputs, and provide a continuous ground plane beneath the routing area. Because the nominal on-resistance is 100 ohms, long or resistive PCB traces can add materially to the total source impedance.
Place the required supply bypass capacitance immediately between the supply and ground pins, with short, low-inductance connections. The MAX399CPE+ is a low-voltage CMOS device, so supply voltage and logic-threshold compatibility must be checked before connecting its digital select inputs. Use a quiet source where switching transients could disturb the multiplexed measurement, and verify the complete signal path against the permitted analog input range.
Do not assume that every similarly described multiplexer is a direct replacement. The MAX399CPE+ uses a 16-pin PDIP footprint, while known functional alternatives use different packages. Before substitution, compare pin assignments, supply requirements, select-logic polarity, on-resistance, bandwidth, leakage, and absolute maximum ratings. Prototype the proposed change and verify settling and channel-to-channel error with the intended source impedance.
Compliance Information
The available product descriptions identify a commercial-grade component but do not provide environmental compliance declarations for the exact ordering suffix.