Analog Devices

MAX399CPE+ - Dual 4:1 Analog Multiplexer | Analog Devices

MPN: MAX399CPE+ ✓ 啟用中
Low voltage Vdss 100 ohm Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX399CPE+ 概覽

Analog Devices MAX399CPE+ is a precision, low-voltage CMOS analog multiplexer containing two independently controlled 4:1 circuit switches, packaged in a 16-pin PDIP. The device is designed to route analog signals by presenting a low, repeatable on-resistance while preserving channel matching across the specified signal range. Its nominal on-resistance is 100 ohms, with channel-to-channel matching within 6 ohms and a maximum on-resistance of 11 ohms as stated in the manufacturer’s device description.

An analog multiplexer is an interface IC that connects one signal source to one of several destinations using digital control inputs. The MAX399 family belongs to the broader CMOS analog-switch and signal-routing hierarchy. Each internal switch provides four selectable inputs, and the two switches can be operated independently, making the device useful for channel selection, signal routing, test systems, and precision measurement front ends.

Key features include dual 4:1 configuration, low-voltage CMOS operation, 100-ohm nominal on-resistance, on-resistance matching within 6 ohms, and a maximum on-resistance of 11 ohms. The two-circuit architecture allows a board to multiplex two analog channels concurrently. The 16-pin PDIP package also provides through-hole mechanical compatibility with conventional perforated-board and through-hole PCB designs.

The MAX399CPE+ uses digital select logic to connect one of four inputs in each switch section to its common output. Its monolithic CMOS implementation is intended for precision signal routing, where consistent resistance between channels is important for minimizing gain error and channel-dependent measurement variation. Because this is a passive switching function, power consumption, switching speed, bandwidth, supply voltage, and logic thresholds remain central considerations when integrating the device.

Typical uses include multiplexed sensor acquisition, instrumentation signal routing, automated test equipment, sample-and-hold front ends, data acquisition systems, and analog measurement boards. In a two-axis or redundant-channel acquisition circuit, the two independent switch sections can route separate analog inputs simultaneously, reducing the number of external analog switches required.

Designers should verify the supply voltage, control-logic levels, signal-range limits, switching time, bandwidth, leakage, and absolute maximum ratings in the manufacturer datasheet before finalizing a circuit. Keep routed analog traces short, provide a stable ground reference, and place bypass capacitance close to the supply pins when the device operates from a supply rail.

This product page combines the exact MAX399CPE+ configuration with practical selection guidance, verified interface characteristics, application-oriented design notes, and a conservative comparison of documented drop-in alternatives. It is intended to help engineers identify whether the 16-pin dual 4:1 multiplexer fits their signal-routing requirements before requesting a quotation.

直接替換替代品,適用於 MAX399CPE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MAX399CPE

✅ 直接替換
📦 16-pin PDIP
Same MAX399 dual 4:1 function and 16-pin PDIP package; commercial grade and ordering suffix differ by 0% in the documented channel count, while detailed electrical deltas are not published in the available records

📋 參考替代品(不在目錄中)

MAX399CPE+ 規格

Product Type Precision CMOS analog multiplexer
Number of Switch Circuits 2 circuits
Multiplexer Configuration Dual 4:1
Total Number of Inputs 8 analog inputs
Number of Common Outputs 2 analog outputs
Nominal On-Resistance 100 ohm
Maximum On-Resistance 11 ohm
On-Resistance Matching Between Channels 6 ohm maximum
Technology CMOS
Supply Classification Low voltage
封裝 16-pin PDIP
腳位數 16 pins
安裝類型 Through hole
Package Code PDIP
Package Shape Rectangular
Temperature Grade Commercial
Surface Mount No

MAX399CPE+ rectangular 腳位配置指南

MAX399CPE+(rectangular 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX399CPE+ 的 rectangular 封裝腳位圖

無詳細腳位定義資料: MAX399CPE+.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX399CPE+ 適用於 6 應用s: Multiplexed Sensor Acquisition, Precision Test Equipment, Data Acquisition Front Ends, Instrument Signal Routing, Sample-and-Hold Signal Conditioning, Industrial Control Signal Selection.

🧩

Multiplexed Sensor Acquisition

The MAX399CPE+ is well suited to front ends that select among several analog sensor outputs. Each independent 4:1 section can connect one of four sensor signals to its common output, while the second section can acquire a complementary or redundant channel. The documented 6-ohm on-resistance matching and 11-ohm maximum on-resistance help constrain channel-dependent errors in precision measurements. Engineers should still include the switch resistance in the sensor and amplifier input budget and verify settling time against the acquisition rate.

🖥️

Precision Test Equipment

In automated test equipment, the MAX399CPE+ can route several test stimuli or measurement inputs through a shared analog path. Its two 4:1 sections allow two channels to be selected concurrently, reducing the number of separate analog routing devices needed on a board. Channel matching within 6 ohms is useful when maintaining similar source impedance and gain across different test points. Calibration should account for the actual on-resistance, leakage, settling behavior, and the leakage of surrounding circuitry.

📡

Data Acquisition Front Ends

The MAX399CPE+ supports compact data-acquisition front ends that must sample several physical channels with one analog measurement chain. Eight inputs can be presented through two independently selected outputs, allowing paired or interleaved measurements without duplicating the entire analog chain. The 100-ohm nominal on-resistance makes source-impedance effects relevant, so the receiving amplifier should have suitable input impedance and the system should include calibration for channel resistance variation.

🔧

Instrument Signal Routing

The MAX399CPE+ can simplify analog signal routing in measurement instruments that monitor multiple inputs but share an amplifier, converter, or display channel. The dual 4:1 organization provides eight selectable inputs while preserving two parallel paths. Because the device is implemented in low-voltage CMOS, its supply requirements and logic thresholds must be compatible with the surrounding instrument. Confirm the permitted signal range, bandwidth, switching time, and off-state behavior before using it with high-impedance sources.

⚡

Sample-and-Hold Signal Conditioning

The MAX399CPE+ can select among multiple conditioned analog inputs before a sample-and-hold stage in laboratory and industrial signal-conditioning equipment. Selecting one of four signals per section permits rapid comparison of reference, measurement, or calibration nodes while a common acquisition circuit processes the result. The maximum 11-ohm on-resistance and 6-ohm channel matching are helpful for gain consistency, but sampling accuracy also depends on source impedance, capacitor selection, leakage, and the time allowed for the switch to settle.

🏭

Industrial Control Signal Selection

The MAX399CPE+ is applicable to industrial control and monitoring boards that must select among multiple low-level analog inputs using digital control signals. Its two independent 4:1 switch sections can manage paired feedback or monitoring channels while keeping the routing component count low. Industrial designs must provide clean supply bypassing, maintain a low-impedance ground reference, and separate control traces from analog paths. Verify the device ratings against the factory environment and the electrical limits of the connected sensors.

推薦產品摘要

MAX399CPE+ Analog Devices 用於: Multiplexed Sensor Acquisition, Precision Test Equipment, Data Acquisition Front Ends, Instrument Signal Routing, Sample-and-Hold Signal Conditioning, Industrial Control Signal Selection ADG441BRZ Precision analog switch for measurement routing 用於: Multiplexed Sensor Acquisition, Data Acquisition Front Ends, Sample-and-Hold Signal Conditioning MAX4551CEE+T Precision multiplexer for related routing architectures 用於: Precision Test Equipment, Instrument Signal Routing, Industrial Control Signal Selection
What is the MAX399CPE+?
The MAX399CPE+ is a precision, low-voltage CMOS analog multiplexer with two independent 4:1 switch circuits in a 16-pin PDIP package. It routes one of four analog inputs to each common output under digital control. The manufacturer identifies the device as an analog switch IC with 100-ohm nominal on-resistance and a 16-terminal through-hole package.
Where to download the MAX399CPE+ datasheet PDF?
The MAX399CPE+ datasheet PDF is available through the linked manufacturer document at https://pdf.digi-electronics.com/pdf/1471/MAX399CPE-datasheet.pdf. Use the ordering-information and pin-description sections to confirm the PDIP configuration, electrical ratings, control inputs, and ordering suffix before releasing a production design.
What are the key specifications of MAX399CPE+ that engineers should know?
The MAX399CPE+ is a dual 4:1, low-voltage CMOS analog multiplexer in a 16-pin PDIP package. Its documented headline characteristics are 100-ohm nominal on-resistance, on-resistance matching within 6 ohms, and 11-ohm maximum on-resistance. The two switch circuits can route eight analog inputs to two common outputs, subject to the supply, logic, signal-range, and timing limits in the manufacturer datasheet.
How many analog channels can the MAX399CPE+ multiplex?
The MAX399CPE+ contains two independent 4:1 circuits, providing eight analog inputs and two common outputs in total. Each control group selects one input for its associated output. This lets a design multiplex two signal paths concurrently, which is useful for paired or redundant sensor measurements.
Where can I buy MAX399CPE+ online?
Use the Request a Quote form on this page to request MAX399CPE+ availability, current commercial terms, and a quotation for the exact 16-pin PDIP ordering configuration. The form avoids stale marketplace pricing and lets the request include quantity, target date, shipment destination, and any required traceability documentation.
What is the current price of MAX399CPE+?
Current commercial pricing for the MAX399CPE+ should be requested through the Request a Quote form on this page. Supply the required quantity, delivery location, and target date so the quotation reflects the exact MAX399CPE+ suffix, 16-pin PDIP package, current lifecycle status, and available production or inventory allocation.
What is the lead time and stock status for MAX399CPE+?
Current stock, minimum order quantity, and lead time for MAX399CPE+ should be confirmed through the Request a Quote form on this page. Include your required quantity and target delivery date in the request. This is the appropriate way to determine whether available inventory or a factory schedule best supports the project.
Is MAX399CPE+ in stock?
MAX399CPE+ availability changes with order quantity and purchasing timing. Request a current quotation through the Request a Quote form on this page and state the required quantity and target date. The request can establish current stock position, factory lead time, and allocation without relying on a static availability label.
Can MAX4551CEE+T replace MAX399CPE+ as a drop-in part?
The MAX4551CEE+T is not a verified pin-to-pin drop-in replacement for the MAX399CPE+ because the MAX399CPE+ uses a 16-pin PDIP footprint and the comparison listing identifies the MAX4551 variant with a different package. Although both perform precision analog multiplexing functions, PCB layout, control logic, pin arrangement, and electrical limits must be checked before substitution.
Is MAX399CPE+ suitable for precision instrumentation?
The MAX399CPE+ is suitable for instrumentation routing when the 100-ohm nominal on-resistance, 6-ohm channel matching, and 11-ohm maximum on-resistance meet the system error budget. Its dual 4:1 configuration is particularly useful for routing paired sensor channels. Bandwidth, leakage, switching time, and allowed signal range must also be checked against the acquisition requirements.
What is the best drop-in replacement for MAX399CPE+?
No complete drop-in replacement is established by the available cross-reference information for the exact MAX399CPE+ configuration. The MAX399CPE designation without the plus suffix represents the closest same-package ordering entry, but suffix, commercial-grade, and packaging details should be confirmed with the manufacturer. Known functional equivalents using different packages are not drop-in replacements because PCB changes would be required.
What can replace MAX399CPE+?
The closest candidate is MAX399CPE because it retains the MAX399 family identity and 16-pin PDIP configuration, but final substitution requires confirmation that the operating-temperature grade, marking, and commercial terms are equivalent. Other documented multiplexers perform similar functions yet use different packages, so they are functional alternatives rather than no-change PCB replacements.
MAX399CPE+ vs MAX4551CEE+T - which is better for a DIP-based design?
Choose MAX399CPE+ for a design that must retain the 16-pin PDIP footprint and dual 4:1 precision multiplexing arrangement. MAX4551CEE+T may offer a different package and switched-resistance characteristics, so it is not a direct drop-in choice for a DIP PCB. Compare supply voltage, logic thresholds, on-resistance, bandwidth, leakage, and switching time against the actual measurement path.
How should I design the PCB around MAX399CPE+?
Route analog inputs and common outputs as short, guarded traces, connect the device ground pins to a low-impedance ground plane, and keep digital select traces away from sensitive analog conductors. Decoupling capacitors should be placed close to the supply and ground pins, while unused inputs should be tied to a defined potential according to the manufacturer datasheet. Confirm every pin function before fabrication.
Is MAX399CPE+ RoHS and REACH compliant?
The RoHS and REACH status of the exact MAX399CPE+ ordering configuration is not stated in the available manufacturer description. Request the current material or environmental compliance declaration for the exact suffix through the Request a Quote form on this page. Do not infer declarations from a related MAX399 package or a different manufacturer listing.

工程參考資料,適用於 MAX399CPE+ — 比較、設計指引及合規資訊。

選型指南

Choose MAX399CPE+ when the design needs two independently controlled 4:1 analog routing sections in a 16-pin PDIP package. Its 100-ohm nominal on-resistance, 11-ohm maximum on-resistance, and channel matching within 6 ohms make it appropriate for measurement systems where channel-to-channel consistency matters. MAX399CPE is the closest same-package ordering candidate when the commercial-grade marking and suffix are acceptable, but confirm the exact ordering terms before substitution. MAX4551CEE+T and ADG441BRZ are useful functional comparisons for precision multiplexing or switching, but their different packages prevent drop-in use on an existing MAX399CPE+ board. For new designs, compare supply voltage, control thresholds, bandwidth, leakage, switching time, signal range, and package availability alongside the on-resistance specifications.

與替代品比較

參數 本產品 MAX399CPE
Brand Analog Devices Analog Devices
Package 16-pin PDIP 16-pin PDIP
Multiplexer Configuration Dual 4:1 Dual 4:1
Number of Switch Circuits 2 circuits 2 circuits
Nominal On-Resistance 100 ohm 100 ohm
Maximum On-Resistance 11 ohm 11 ohm
On-Resistance Matching Between Channels 6 ohm maximum 6 ohm maximum
Technology Low-voltage CMOS Low-voltage CMOS
Temperature Grade Commercial Commercial
Mounting Type Through hole Through hole

主要差異化特點

  • Two independent 4:1 analog paths in one package (對比MAX399CPE)
  • Tight channel-to-channel resistance matching (對比MAX399CPE)
  • Through-hole 16-pin PDIP implementation (對比MAX399CPE)

設計說明

Route each analog input and common output as a short trace directly to the relevant MAX399CPE+ pin. Keep the select traces away from sensitive analog conductors, avoid sharing high-current return paths with the analog inputs, and provide a continuous ground plane beneath the routing area. Because the nominal on-resistance is 100 ohms, long or resistive PCB traces can add materially to the total source impedance.

Place the required supply bypass capacitance immediately between the supply and ground pins, with short, low-inductance connections. The MAX399CPE+ is a low-voltage CMOS device, so supply voltage and logic-threshold compatibility must be checked before connecting its digital select inputs. Use a quiet source where switching transients could disturb the multiplexed measurement, and verify the complete signal path against the permitted analog input range.

Do not assume that every similarly described multiplexer is a direct replacement. The MAX399CPE+ uses a 16-pin PDIP footprint, while known functional alternatives use different packages. Before substitution, compare pin assignments, supply requirements, select-logic polarity, on-resistance, bandwidth, leakage, and absolute maximum ratings. Prototype the proposed change and verify settling and channel-to-channel error with the intended source impedance.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product descriptions identify a commercial-grade component but do not provide environmental compliance declarations for the exact ordering suffix.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX399CPE+ datasheet MAX399CPE+ specifications MAX399CPE+ pinout MAX399CPE+ datasheet pdf MAX399CPE+ equivalent MAX399CPE+ replacement MAX399CPE+ drop-in replacement MAX399CPE+ price MAX399CPE+ stock Analog Devices MAX399CPE+ MAX399CPE+ dual 4:1 mux MAX399CPE+ 16-pin PDIP

相關元件與詞彙

Analog Devices MAX399CPE+ MAX399CPE MAX4551CEE+T ADG441BRZ precision analog multiplexer analog switch IC CMOS analog multiplexer dual 4:1 multiplexer analog signal routing precision measurement on-resistance channel resistance matching low-voltage CMOS 16-pin PDIP PDIP package through-hole mounting industrial instrumentation data acquisition test equipment sample-and-hold sensor acquisition digital select control signal leakage switching time
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情