STMicroelectronics

MC1458IDT - Dual 1 MHz Op Amp | STMicroelectronics

MPN: MC1458IDT ✓ Active
30 nA Id 8-pin SOIC Package
MOQ: 1 |

MC1458IDT Overview

The STMicroelectronics MC1458IDT is a high-performance, monolithic dual operational amplifier with two amplifier circuits, a 1 MHz gain-bandwidth product, a 0.8 V/µs slew rate, and an 8-pin SOIC package. Its 30 nA input bias current supports low-loading signal acquisition, while the wide input common-mode range expands the usable input span for general-purpose analog designs.

An operational amplifier is an analog building block used to amplify voltage differences and implement feedback-based functions such as voltage followers, summing amplifiers, integrators, comparators, and active filters. The MC1458 belongs to the dual general-purpose operational-amplifier family, combining two independent amplifiers in one package. This integration reduces board area in analog systems that need more than one amplifier but do not require rail-to-rail inputs or low-noise instrumentation performance.

The device's 1 MHz gain-bandwidth product makes it suitable for moderate-speed feedback networks and audio-frequency signal conditioning. Its 0.8 V/µs slew rate limits how quickly the output can follow large voltage changes, so stable feedback compensation and suitable loop-gain choices remain important. The 30 nA input bias current is particularly useful when driving relatively high-impedance sensors or resistive networks, because input loading has less effect on the source signal.

Each amplifier in the MC1458 can operate from a wide range of supply voltages, enabling operation in both conventional single-supply and dual-supply analog systems. STMicroelectronics describes the MC1458 as a monolithic dual operational amplifier intended for integrators, summing amplifiers, and general feedback applications. Short-circuit protection and an absence of latch-up behavior support dependable use in conventional amplifier topologies.

Typical applications include audio preamplification, low-frequency active filtering, instrumentation signal conditioning, voltage buffering, summing and difference amplifiers, and general feedback control. In a voltage follower, the high input impedance limits source loading. In an integrator or active filter, component tolerances and amplifier bandwidth determine usable frequency range. The SOIC-8 package is suitable for conventional surface-mount assembly and exists in tape-and-reel distribution format.

When designing around the MC1458IDT, preserve signal headroom at the amplifier output and keep feedback-loop bandwidth compatible with the 1 MHz gain-bandwidth product. Place input, output, and compensation components close to their associated pins, and avoid long high-impedance traces that can increase noise pickup. Decoupling capacitors should connect directly across the supply pins to minimize supply-to-ground loop area.

This product page combines the STMicroelectronics family description with a practical breakdown of the MC1458IDT's amplifier count, bandwidth, slew rate, bias current, package, and application roles. It also provides replacement guidance, pin-location information, comparison criteria, and design notes for engineers evaluating the MC1458 against other general-purpose dual operational amplifiers.

Drop-in alternatives for MC1458IDT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MC1458IDT (same form factor and footprint) — differing in Package, Device Type, Short-Circuit Protection.

STMicroelectronics
Package: 8-SOIC
Device Type: High-performance monolithic dual operational amplifier
Compare with MC1458IDT →
STMicroelectronics
Device Type: Dual operational amplifier
Short-Circuit Protection: Present
Compare with MC1458IDT →

MC1458DT

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 SOIC-8
High-performance monolithic dual operational amplifier · 2 · Wide input common-mode voltage range · Wide operating-voltage range

Contact for price

View Datasheet →

MC1458CDT

✅ Drop-In ⚠️ Specs Unverified
📦 SOIC-8
Same MC1458 dual-op-amp family and 8-pin SOIC footprint, with the C ordering suffix intended to distinguish its qualification class; confirm temperature limits before substitution.

📋 Reference alternative (not in catalog)

MC1458IDT Maximum Ratings & Electrical Characteristics

Product Type Dual operational amplifier
Number of Amplifier Circuits 2 circuits
Amplifier Type General-purpose
Gain-Bandwidth Product 1 MHz
Slew Rate 0.8 V/µs
Input Bias Current 30 nA
Short-Circuit Protection Supported
Package 8-pin SOIC
Mounting Type Surface mount
Packaging Format Cut Tape and Digi-Reel
Product Status Active

MC1458IDT 8-pin soic Pin Configuration Guide

Pin configuration for MC1458IDT (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for MC1458IDT

No detailed pinout data available for MC1458IDT.

Refer to the datasheet for full pin configuration.

Typical Applications

MC1458IDT is suitable for 6 applications: Audio Signal Buffering, Active Low-Frequency Filtering, Summing and Mixing Amplifier, Integrator and Control-Loop Circuit, Instrumentation Signal Conditioning, General Feedback Control.

🎧

Audio Signal Buffering

The MC1458IDT fits audio-frequency voltage buffering because its 1 MHz gain-bandwidth product provides more bandwidth than typical baseband audio signal paths, while the 0.8 V/µs slew rate supports moderate-amplitude waveforms. Its 30 nA input bias current also limits loading when the source is a high-impedance audio front end. Each half of the IC can implement a unity-gain buffer, impedance converter, or non-inverting stage. Because the output is not rail-to-rail by default, check the output swing against the signal peak and load. Keep feedback resistors close to the relevant pins and use short input routes to reduce susceptibility to noise.

🔧

Active Low-Frequency Filtering

The MC1458IDT is suitable for first- and second-order active filters operating below its 1 MHz gain-bandwidth limit. The amplifier's 30 nA input bias current is advantageous with high-impedance resistor networks because it reduces the voltage shift caused by input loading, while its 0.8 V/µs slew rate helps preserve waveform shape at low frequencies. Component tolerances and the op amp's finite gain can shift the filter's center frequency and Q. Validate the selected R and C values across temperature and load, and keep the feedback network physically compact to reduce parasitic effects. The wide operating-voltage range also supports conventional dual-supply filter designs.

⚡

Summing and Mixing Amplifier

The MC1458IDT can implement weighted summing, mixing, and difference functions where two independent amplifier channels are useful in one 8-pin SOIC package. Its 1 MHz gain-bandwidth product supports moderate-bandwidth closed-loop gains, while the 30 nA input bias current reduces errors in high-impedance summing networks. The principal design limit is the 0.8 V/µs slew rate when combining several full-scale signals. Calculate the worst-case summed output amplitude and verify that it remains within the amplifier's output-swing limits. Accurate resistor ratios and short, quiet routing are essential for preserving the intended weighted sum.

📺

Integrator and Control-Loop Circuit

The MC1458IDT is explicitly suited to integrator and general feedback applications, allowing its two amplifier channels to implement an integration stage and an auxiliary control or monitoring function. Its 1 MHz gain-bandwidth product is adequate for low-frequency loops, and the 0.8 V/µs slew rate defines the usable large-signal bandwidth. Practical integrator designs require attention to capacitor leakage, input bias current, resistor tolerance, and saturation recovery. Limit the working frequency well below the amplifier's unity-gain bandwidth and include a suitable feedback resistor to control DC drift. Confirm the exact common-mode and output-swing limits before finalizing the loop operating range.

🏭

Instrumentation Signal Conditioning

The MC1458IDT can provide input buffering, gain, offset, and general analog conditioning for moderate-impedance sensors and low-frequency measurement channels. Its 30 nA input bias current reduces source-loading error compared with parts having substantially higher bias currents, and its 1 MHz gain-bandwidth product supports signal paths that do not require high-speed instrumentation amplifiers. A single package can serve two channels or combine buffering with gain. Check input offset voltage, common-mode range, output swing, and noise against the measurement accuracy requirement. For bridge sensors, low-offset or dedicated instrumentation amplifiers may be preferable when precision and common-mode performance dominate.

🖥️

General Feedback Control

The MC1458IDT is appropriate for basic analog feedback control, regulator error amplification, and feedback-conditioned analog blocks because STMicroelectronics identifies general feedback applications as a primary use. Its 1 MHz gain-bandwidth product permits modest loop bandwidth, while the 0.8 V/µs slew rate affects transient response and large-signal stability. Use one channel as the forward-path amplifier and the other as a buffer, monitor, or auxiliary feedback path. Confirm phase margin through practical compensation testing, account for output loading, and keep the feedback node compact. This is a general-purpose solution rather than a dedicated precision regulator or instrumentation amplifier.

What is the MC1458IDT?
The MC1458IDT is an active, dual general-purpose operational amplifier from STMicroelectronics in an 8-pin SOIC package. It contains two amplifier circuits and is specified for a 1 MHz gain-bandwidth product, 0.8 V/µs slew rate, and 30 nA input bias current. According to the STMicroelectronics MC1458 product documentation, it is intended for analog signal-conditioning, integrator, summing-amplifier, and general feedback applications.
What are the key specifications of MC1458IDT that engineers should know?
The principal MC1458IDT specifications are two amplifier circuits, a 1 MHz gain-bandwidth product, 0.8 V/µs slew rate, and 30 nA input bias current. The device uses an 8-pin SOIC package and is identified as active. According to the STMicroelectronics MC1458 family documentation, its wide operating-voltage range supports conventional single-supply and dual-supply analog circuits, while short-circuit protection supports general feedback applications.
What is the gain-bandwidth product of MC1458IDT?
The MC1458IDT has a 1 MHz gain-bandwidth product. This value determines how much closed-loop gain can be maintained as operating frequency rises because bandwidth generally decreases as the selected feedback gain increases. According to the STMicroelectronics MC1458 documentation, the amplifier is suited to moderate-speed, general-purpose analog circuits rather than wideband video or high-speed signal-processing systems.
What is the slew rate of MC1458IDT?
The MC1458IDT has a slew rate of 0.8 V/µs. According to the STMicroelectronics MC1458 family documentation, this controls the maximum rate at which the output can change under suitable load and feedback conditions. It is adequate for many audio-frequency and low-frequency signal-conditioning tasks, but large-signal, high-frequency waveforms can become slew-rate limited.
Why is the 30 nA input bias current of MC1458IDT important?
The 30 nA input bias current of MC1458IDT is important when the amplifier senses a high source impedance. Input bias current creates a voltage error across that impedance, so lower current reduces signal loading and helps preserve accuracy. According to the component specifications, the MC1458 is a general-purpose dual amplifier rather than a dedicated low-input-current instrumentation amplifier.
Can MC1458IDT be used in single-supply circuits?
The MC1458IDT can be used in single-supply analog circuits, subject to the exact input and output common-mode limits defined in the manufacturer datasheet. According to STMicroelectronics, its wide range of operating voltages supports general feedback applications. The signal must remain inside the amplifier's usable input and output ranges, and the circuit must provide suitable biasing for single-supply operation.
Where can I download the MC1458IDT datasheet PDF?
The official MC1458IDT documentation is available through STMicroelectronics' MC1458 product page, which links to the family datasheet and technical information. The manufacturer datasheet is the authoritative source for minimum and maximum supply voltage, input offset, output swing, common-mode limits, electrical characteristics, and the authoritative pin description. Use the package drawing and pin table when assigning PCB tracks.
Where can I find the MC1458IDT pinout?
The MC1458IDT pinout is defined in the pin-description table and package drawing in the STMicroelectronics MC1458 manufacturer documentation. The target is an 8-pin SOIC, with one operational amplifier per IC. Verify every net against the specific ordering code before layout because the operational-amplifier power pins, input pins, and output pins must follow the manufacturer's numbered package drawing.
What can replace MC1458IDT as a drop-in part?
A true drop-in replacement for MC1458IDT must use the same 8-pin SOIC footprint and preserve the amplifier pin assignments, supply arrangement, input common-mode range, output swing, and feedback behavior. MC1458DT is a same-family STMicroelectronics option that retains the SOIC-8 format, while its temperature qualification should be checked for the target system. Confirm all electrical limits in the manufacturer documentation before substitution.
Is MC1458IDT the same as MC1458DT?
MC1458IDT and MC1458DT are STMicroelectronics members of the same MC1458 dual-op-amp family and use the same 8-pin SOIC format. Their exact ordering-code differences must be checked against temperature grade and distribution requirements before one is treated as interchangeable with the other. The MC1458IDT is identified as active, while the manufacturer documentation for each suffix should confirm operating-temperature limits and production status.
When should I choose MC1458IDT over another dual operational amplifier?
Choose MC1458IDT when a design needs two general-purpose amplifiers, a 1 MHz gain-bandwidth product, a 0.8 V/µs slew rate, and an 8-pin SOIC package. It is a practical option for audio-frequency buffers, summing amplifiers, integrators, and feedback control. Choose a different amplifier when the design requires rail-to-rail inputs, substantially lower noise, wider bandwidth, lower offset, or guaranteed output-current capability beyond the MC1458 specifications.
Is MC1458IDT suitable for active filters and integrators?
Yes, the MC1458IDT is suitable for many active-filter and integrator circuits because STMicroelectronics identifies those uses specifically. The 1 MHz gain-bandwidth product supports low-frequency to audio-range feedback networks, while the 0.8 V/µs slew rate affects large-signal behavior. Component tolerances, input bias current, output loading, and signal amplitude must be checked against the target filter or integration waveform.
Where can I buy MC1458IDT online?
Use the Request a Quote form on this page to request MC1458IDT availability, current lead time, and an order quotation. The component is identified as active and is offered in an 8-pin SOIC surface-mount package with cut-tape and Digi-Reel distribution. The quote form is the appropriate route for a current commercial commitment rather than relying on a static catalog entry.
What is the price of MC1458IDT?
MC1458IDT pricing depends on order quantity, current inventory, package format, and market conditions. Use the Request a Quote form on this page for a current quotation tied to your required quantity and delivery plan. The structured pricing panel, when populated for this ordering code, provides the applicable quantity breaks without requiring a manual price request for every quantity.
What is the lead time and stock status of MC1458IDT?
The MC1458IDT is identified as active, but current stock and production lead time can change with order quantity and distribution format. Submit the quantity, target date, and desired reel configuration through the Request a Quote form on this page. This gives you a current supply commitment instead of an unverified availability estimate for the MC1458IDT ordering code.
What is the best STMicroelectronics equivalent for MC1458IDT?
MC1458DT is the closest same-family STMicroelectronics option identified for the MC1458IDT because both use the 8-pin SOIC format and share the dual general-purpose amplifier architecture. Verify the suffix-specific temperature range and pin details before approval. If electrical performance, package, or qualification requirements are not identical, treat the candidate as a reviewed replacement rather than an automatic substitution.

Engineering reference data for MC1458IDT — comparison, design guidance, and compliance information.

Selection Guide

Choose MC1458IDT for conventional dual-amplifier designs that need a 1 MHz gain-bandwidth product, 0.8 V/µs slew rate, 30 nA input bias current, and an 8-pin SOIC package. It is well suited to audio-frequency buffering, active filters, summing networks, integrators, and general feedback control. MC1458DT is a practical same-family option when its suffix-specific temperature qualification meets the system requirements. MC1458CDT may be relevant when its ordering suffix provides the required qualification class, but the temperature limits must be confirmed. Do not choose this family when the design requires rail-to-rail inputs, very low offset, exceptionally low noise, high output current, or bandwidth well above 1 MHz.

Comparison with Alternatives

Parameter This Product MC1458DT MC1458CDT
Package SOIC-8 SOIC-8 SOIC-8
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Number of Amplifiers 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Slew Rate 0.8 V/µs 0.8 V/µs 0.8 V/µs
Input Bias Current 30 nA 30 nA 30 nA
Amplifier Type General-purpose General-purpose General-purpose

Key Differentiators

  • Two general-purpose amplifiers in one compact package (vs MC1458DT)
  • Moderate bandwidth and slew performance for general analog feedback (vs MC1458CDT)
  • Low input loading for higher-impedance signal sources (vs MC1458DT)

Design Notes

Place the input, output, feedback, and supply-decoupling connections directly to their corresponding SOIC-8 pins. Keep the ground return close to the amplifier and use a dedicated bypass capacitor from each supply pin to the local ground plane. The 1 MHz gain-bandwidth product makes the device appropriate for low-frequency and audio circuits, but long feedback traces can still create parasitic coupling or oscillation. Route sensitive inputs away from switching nodes and power inductors.

Do not assume that an 8-pin dual amplifier can replace every dual op amp with the same body size. Verify the exact pin assignments, supply-pin locations, input common-mode limits, output swing, and offset requirements. The MC1458IDT's 0.8 V/µs slew rate and 1 MHz gain-bandwidth product also constrain large-signal and high-frequency operation. Check the highest expected signal amplitude and closed-loop gain before finalizing the circuit.

For integrator and active-filter circuits, account for input bias current, capacitor leakage, and resistor tolerances rather than relying only on nominal component values. The 30 nA bias current can create meaningful DC error with very high source impedances. Keep resistor networks away from temperature-sensitive areas when possible, use low-leakage capacitors for integration, and validate stability over the intended frequency and load range with real prototype measurements.

Check the complete output-voltage range under the intended load because the allowable input and output common-mode range depends on the supply voltage. The MC1458 family supports a wide operating-voltage range, but that does not make every output waveform valid at every supply. Maintain the required output headroom for the selected feedback gain and load, and ensure the power-supply rails remain stable without excessive ripple.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for the MC1458IDT. Confirm the current manufacturer product-page declarations or material documentation for the exact ordering code.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

MC1458IDT datasheet MC1458IDT pinout MC1458IDT datasheet pdf MC1458IDT specifications MC1458IDT equivalent MC1458IDT replacement MC1458IDT cross reference MC1458IDT price STMicroelectronics MC1458IDT MC1458IDT SOIC-8 amplifier MC1458IDT active filter MC1458IDT audio buffer MC1458IDT vs MC1458DT MC1458IDT application circuit

Related Components & Terms

STMicroelectronics MC1458IDT MC1458DT MC1458CDT dual operational amplifier operational amplifier analog amplifier integrated circuit general-purpose amplifier 1 MHz gain-bandwidth product 0.8 V/µs slew rate 30 nA input bias current 8-pin SOIC surface-mount package voltage feedback voltage follower summing amplifier active filter integrator feedback control audio signal conditioning input common-mode range output voltage swing short-circuit protection
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details