STMicroelectronics

MC33171DT - 2.1MHz Low-Power Op Amp | STMicroelectronics

MPN: MC33171DT ✓ Active
4 V to 44 V Vdss 200 µA Id 8-pin SOIC Package
MOQ: 1 |

MC33171DT Overview

STMicroelectronics MC33171DT is a single bipolar operational amplifier optimized for low consumption and moderate speed, delivering a 2.1 MHz gain-bandwidth product with a 2 V/µs slew rate. It operates from a single 4 V to 44 V supply or from dual ±2 V to ±22 V rails and consumes approximately 200 µA. The amplifier is packaged in an 8-pin SOIC, making it suitable for industrial control, instrumentation, signal conditioning, and general-purpose analog signal paths.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. Within the broader hierarchy of analog and mixed-signal electronics, an operational amplifier belongs to the amplifier IC family and supports precision control, buffering, filtering, sensing, and feedback-based circuit functions. The MC33171 combines a bipolar input and output stage with a low-current architecture intended to preserve useful speed without the higher consumption associated with many general-purpose precision amplifiers.

The MC33171DT's 2.1 MHz gain-bandwidth product supports signal paths where moderate bandwidth is more important than nanovolt-level input noise. Its 2 V/µs slew rate gives it the capability to process larger voltage changes quickly, while its approximately 200 µA consumption supports low-power signal-conditioning systems. The common-mode input range extends toward the lower supply rail, enabling single-supply operation from 4 V to 44 V. Dual-rail operation is also possible over a stated range of ±2 V to ±22 V.

The 8-pin SOIC package provides a conventional surface-mount footprint for analog boards and simplifies assembly alongside mixed-signal components. Because this is a single-amplifier device, systems requiring multiple independent amplifier channels must use additional packages or a suitable multi-amplifier device. Designers should account for the operating voltage, common-mode range, output swing, stability with the selected feedback network, and external compensation requirements when designing a new circuit.

Typical applications include industrial process-control loops, low-power sensor interfaces, audio and communication signal conditioning, active filters, and general-purpose amplification stages. The extended supply capability is useful in industrial systems where signal levels may vary widely. The low 200 µA consumption is particularly relevant when the amplifier operates continuously from a compact or space-constrained power budget.

For reliable implementation, connect the supply pins to bypass capacitors and route feedback components to minimize parasitic effects. Maintain signal levels within the common-mode and output ranges, and verify stability with the actual load capacitance and source impedance. This page combines manufacturer specifications, package information, sourcing guidance, and practical design considerations for engineers evaluating the MC33171DT.

For design trade-offs, compare the MC33171DT with the related MC33172DT and MC33174DT family members before fixing the BOM. Each option should be selected according to the required gain, bandwidth, slew behavior, and application circuit rather than package availability alone.

Drop-in alternatives for MC33171DT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

MC33172DT

✅ Drop-In ⚠️ Specs Unverified
📦 SOIC-8
Same MC3x171 family and SOIC-8 footprint; family gain and stability characteristics differ by 100% because the MC33172 is a dedicated gain variant

📋 Reference alternative (not in catalog)

MC33174DT

✅ Drop-In ⚠️ Specs Unverified
📦 SOIC-8
Same MC3x171 family and SOIC-8 footprint; family gain and stability characteristics differ by 100% because the MC33174 is a dedicated gain variant

📋 Reference alternative (not in catalog)

MC33171DT Maximum Ratings & Electrical Characteristics

Amplifier Type Single general-purpose operational amplifier
Number of Circuits 1 circuit
Input Transistor Type Bipolar
Gain-Bandwidth Product 2.1 MHz
Slew Rate 2 V/µs
Low-Consumption Current 200 µA
Single-Supply Operating Range 4 V to 44 V
Dual-Supply Operating Range ±2 V to ±22 V
Common-Mode Input Range Extends down to the lower supply rail
Package 8-pin SOIC
Mounting Type Surface mount
Product Category General-purpose amplifier

MC33171DT 8-pin soic Pin Configuration Guide

Pin configuration for MC33171DT (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for MC33171DT

No detailed pinout data available for MC33171DT.

Refer to the datasheet for full pin configuration.

Typical Applications

MC33171DT is suitable for 6 applications: Industrial Process-Control Loops, Low-Power Sensor Signal Conditioning, Active Audio and Communication Filters, General-Purpose Instrumentation Amplification, Battery-Powered Analog Measurement, Power-Supply Monitoring and Control.

🏭

Industrial Process-Control Loops

The MC33171DT is appropriate for low-power industrial process-control blocks because it combines approximately 200 µA consumption with a 2.1 MHz gain-bandwidth product and a 2 V/µs slew rate. Place it in a feedback amplifier around a sensor or transducer, with the loop configured for the required closed-loop gain. Its input common-mode range extends down to the lower supply rail, which is useful when the measured signal sits near the signal-ground region. The designer should still verify output swing, load drive, and stability with the actual sensor impedance and wiring.

🧩

Low-Power Sensor Signal Conditioning

The MC33171DT can condition low-frequency sensor outputs where a 2.1 MHz bandwidth and 2 V/µs slew rate are sufficient without demanding the current consumption of a high-speed amplifier. Its approximately 200 µA operating current supports compact, continuously powered measurement systems. The common-mode input range extending toward the lower rail allows operation from a single supply beginning at 4 V, although the sensor output must remain within the input range. Buffering the sensor directly also makes pin-layout and offset-null treatment important.

🌐

Active Audio and Communication Filters

The MC33171DT can implement first-order and modest-bandwidth active filtering stages for audio or communication signals. Its 2.1 MHz gain-bandwidth product and 2 V/µs slew rate provide useful response beyond low-frequency-only operation while retaining approximately 200 µA consumption. Place feedback resistors and capacitors close to the amplifier pins to reduce parasitic effects, and confirm stability with the source and load impedances. The extended single-supply range also supports mixed-signal boards operating from 4 V to 44 V.

🔧

General-Purpose Instrumentation Amplification

The MC33171DT is suitable for instrumentation blocks that amplify a low-level differential signal when moderate speed and low consumption are more important than exceptionally low offset or bias current. Its 2.1 MHz gain-bandwidth product supports useful closed-loop bandwidth, while the bipolar input stage is intended for conventional precision-style feedback networks. Use the offset-null function only when required, because connecting it incorrectly can affect bias behavior. The signal input, output swing, and common-mode limits must all be checked during instrumentation design.

⚡

Battery-Powered Analog Measurement

The approximately 200 µA consumption of the MC33171DT makes it suitable for battery-powered analog measurement circuits that need more bandwidth than an ultra-low-power comparator or reference can provide. It can buffer a sensor or amplify a feedback-derived signal while operating from a single 4 V to 44 V source. Low quiescent demand helps preserve energy, but external divider, feedback, and sensor currents may dominate the total load. Confirm offset behavior over the intended temperature range and verify whether the load requires greater output-current capability.

🖥️

Power-Supply Monitoring and Control

The MC33171DT can amplify the difference between a monitored power rail and a reference within a feedback-control or fault-detection circuit. Its wide single-supply operating range of 4 V to 44 V supports industrial power systems, and the common-mode range extending toward the lower rail simplifies sensing near ground. The 2 V/µs slew rate permits response to changes faster than a basic low-bandwidth amplifier. Design the sensing network so the amplifier never leaves its common-mode range, including during startup and fault conditions.

What is the MC33171DT?
The MC33171DT is a single bipolar operational amplifier combining approximately 200 µA consumption with a 2.1 MHz gain-bandwidth product and a 2 V/µs slew rate. According to the STMicroelectronics MC33171 product page, the MC3x171 series is intended for low-power applications requiring more bandwidth than a basic micropower amplifier. The device is supplied in an 8-pin SOIC package.
What is the operating voltage range of the MC33171DT?
The MC33171DT operates from 4 V to 44 V with a single supply and from ±2 V to ±22 V with dual supplies. These ranges allow the amplifier to be used in both compact single-rail signal-conditioning circuits and higher-voltage industrial systems. The manufacturer product page identifies the MC33171 as part of the MC3x171 low-consumption, moderate-speed amplifier family.
What are the key specifications of MC33171DT?
The MC33171DT is a one-circuit bipolar operational amplifier with a 2.1 MHz gain-bandwidth product, 2 V/µs slew rate, approximately 200 µA consumption, and an 8-pin SOIC package. According to STMicroelectronics, it also supports single-supply operation from 4 V to 44 V, with the input common-mode range extending down to the lower supply rail.
Can MC33171DT operate from a single 5 V supply?
Yes, the MC33171DT can operate from a 5 V single supply because its stated single-supply range begins at 4 V. The input common-mode range extends toward the lower supply rail, which improves usefulness in low-voltage sensor and signal-conditioning circuits. Designers must still verify the actual signal amplitude, output swing, and stability against the application requirements.
Where can I download the MC33171DT datasheet PDF?
The official MC33171 documentation is available through the STMicroelectronics MC33171 product page at https://www.st.com/en/amplifiers-and-comparators/mc33171.html. Use the manufacturer page for the current datasheet, application information, ordering information, and documented package details. The MC33171DT ordering suffix identifies the 8-pin SOIC configuration.
Where can I find the MC33171DT pinout?
The MC33171DT pin assignment is shown in the manufacturer datasheet linked from the official STMicroelectronics MC33171 product page. The device uses an 8-pin SOIC package and is a single operational amplifier. Use the datasheet pin-description and recommended-layout diagrams when assigning tracks because the amplifier has supply, input, output, and offset-null connections.
What is the best drop-in replacement for MC33171DT?
The closest same-family choices are the MC33172DT and MC33174DT when their gain and stability characteristics fit the circuit. Both use the 8-pin SOIC configuration and belong to the MC3x171 family, but an exact drop-in decision requires checking the manufacturer data for output swing, input bias current, compensation, and application-specific behavior. No cross-brand drop-in part was sufficiently characterized for unqualified recommendation.
What can replace the MC33171DT in an existing PCB?
MC33172DT and MC33174DT are the most practical same-family candidates because they are associated with the MC3x171 family and use an 8-pin SOIC package. However, replacing an amplifier safely requires more than matching the footprint: verify pin functions, gain-bandwidth product, slew rate, common-mode range, output swing, and compensation requirements. For cross-brand alternatives, request a detailed cross-reference review before changing the BOM.
Is MC33172DT a drop-in replacement for MC33171DT?
MC33172DT is a same-family 8-pin SOIC alternative, but it should be treated as a conditional replacement rather than an unconditional substitute. The shared package makes PCB reuse possible, while the amplifier family differences can affect gain, compensation, and dynamic behavior. Compare the relevant datasheet characteristics against the original circuit before approving the substitution.
MC33171DT vs MC33174DT - which is better for a low-power circuit?
The MC33171DT is the better starting point when the design specifically targets the characteristics of the MC33171, including its 2.1 MHz gain-bandwidth product, 2 V/µs slew rate, and approximately 200 µA consumption. MC33174DT may be preferable when its different gain and stability characteristics simplify a particular feedback network. The correct choice depends on the required closed-loop gain and compensation method.
When should I choose MC33171DT over another general-purpose op amp?
Choose the MC33171DT when the design needs a single-channel amplifier combining approximately 200 µA consumption with a 2.1 MHz gain-bandwidth product and a 2 V/µs slew rate. It is especially suitable for single-supply industrial signal conditioning where its common-mode range reaches toward the lower rail. A precision amplifier may be preferable when offset, bias current, or input-noise requirements dominate.
Is MC33171DT suitable for industrial control and sensor interfaces?
Yes, the MC33171DT is well suited to general industrial control and sensor-interface functions that need moderate speed rather than very high precision. Its approximately 200 µA consumption, single-supply operation from 4 V to 44 V, and common-mode input range extending toward the lower rail support low-power signal conditioning. The input and output signals must remain within the device's operating limits.
What is the lead time for MC33171DT?
Current lead time depends on regional inventory, order quantity, and manufacturing conditions. Use the Request a Quote form on this page to state your required quantity, target date, and acceptable packaging so the current schedule can be confirmed. This avoids treating an online inventory indicator as a guaranteed production lead time.
Where can I buy MC33171DT online?
Use the Request a Quote form on this page to request MC33171DT availability, current commercial terms, and a shipment quotation. The form lets you specify quantity, target date, and delivery requirements without relying on a temporary listing status. Confirm the exact MC33171DT suffix and the required 8-pin SOIC delivery format in the quotation.
Is MC33171DT in stock and what is its price?
Current stock and commercial terms for MC33171DT should be confirmed through the Request a Quote form on this page. Provide the required quantity, delivery location, and target date so XAIPART can return an actionable quotation. Because availability changes with production and regional inventory, an online listing should not be treated as a guaranteed stock reservation.
What is the best cross-brand equivalent for MC33171DT?
The MC33171DT cross-reference search identifies UA741, CA3140, and TL081 families as functional equivalents, but it does not establish that every member is an 8-pin SOIC, pin-to-pin replacement. Therefore, no cross-brand part is presented as a guaranteed drop-in alternative. For an approved redesign, compare supply range, gain-bandwidth product, slew rate, common-mode range, output swing, bias current, and compensation requirements.

Engineering reference data for MC33171DT — comparison, design guidance, and compliance information.

Selection Guide

Choose the MC33171DT when a single-channel, general-purpose bipolar amplifier is needed with approximately 200 µA consumption, a 2.1 MHz gain-bandwidth product, and a 2 V/µs slew rate. It is a strong fit for low-power industrial signal conditioning, sensor buffering, and feedback-control circuits operating from 4 V to 44 V. Consider MC33172DT when its dedicated gain characteristic better matches the intended feedback network, and consider MC33174DT when its alternate family characteristic provides a better match. Treat both as footprint-compatible options that still require circuit-level verification. If offset voltage, bias current, input noise, or output-current capability dominates the requirements, select a precision amplifier instead. For cross-brand substitutions, verify the exact package and pin functions rather than relying on a family-level equivalence claim.

Comparison with Alternatives

Parameter This Product MC33172DT MC33174DT
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Amplifier Type Single bipolar operational amplifier Single bipolar operational amplifier Single bipolar operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit

Key Differentiators

  • Combines low consumption with useful moderate bandwidth (vs MC33172DT)
  • Single-amplifier 8-pin SOIC implementation (vs MC33174DT)
  • Wide single-supply operating capability (vs MC33172DT)

Design Notes

Place supply-bypass capacitors close to the amplifier's supply and ground pins, and keep the return current out of sensitive input traces. The device supports a 4 V to 44 V single supply or ±2 V to ±22 V dual supply, but the selected operating point must also satisfy the input common-mode and output-swing limits. Confirm quiescent current at the actual supply voltage because the manufacturer highlights approximately 200 µA as a family-level low-consumption characteristic.

Route the two input signals as a closely matched pair, especially when the source impedance is high. Keep feedback resistors and compensation components adjacent to the relevant pins, and use a solid ground plane to minimize parasitic coupling. The 8-pin SOIC footprint supports compact layouts, but the exposed signal path remains sensitive to long copper runs and nearby switching nodes. Follow the manufacturer recommended-layout and pin-description diagrams when assigning the PCB footprint.

Do not assume that a matching package alone guarantees an interchangeable amplifier. For MC33171DT, MC33172DT, and MC33174DT candidates, check closed-loop gain, stability, input bias current, offset voltage, output swing, and common-mode range. The family uses different gain-oriented characteristics, so changing the MPN can alter a feedback circuit even when the SOIC-8 land pattern remains unchanged.

Verify stability with the actual source impedance, load capacitance, and feedback network rather than relying only on the nominal gain-bandwidth product. A 2.1 MHz gain-bandwidth product and 2 V/µs slew rate provide substantial bandwidth, but an aggressive closed-loop gain or capacitive load can still alter response and oscillation margin. Measure the assembled circuit across its operating supply range and include source resistance in the simulation model.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The component is a general-purpose analog amplifier and is not an automotive-qualified AEC-Q100 variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established and therefore remain unknown.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

MC33171DT datasheet MC33171DT pinout MC33171DT datasheet pdf STMicroelectronics MC33171DT MC33171DT SOIC-8 amplifier MC33171DT 2.1MHz op amp MC33171DT 200uA low power MC33171DT equivalent MC33171DT replacement MC33171DT vs MC33172DT MC33171DT application circuit MC33171DT price MC33171DT stock MC33171DT footprint

Related Components & Terms

STMicroelectronics MC33171DT MC33172DT MC33174DT UA741 CA3140 TL081 operational amplifier bipolar operational amplifier amplifier IC analog integrated circuit signal conditioning gain-bandwidth product slew rate quiescent current common-mode input range single-supply operation dual-supply operation SOIC-8 surface mount industrial control sensor interface active filter power-supply monitoring
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details