MC33171DT - 2.1MHz Low-Power Op Amp | STMicroelectronics
MPN: MC33171DT ✓ AktifMC33171DT Genel Bakış
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. Within the broader hierarchy of analog and mixed-signal electronics, an operational amplifier belongs to the amplifier IC family and supports precision control, buffering, filtering, sensing, and feedback-based circuit functions. The MC33171 combines a bipolar input and output stage with a low-current architecture intended to preserve useful speed without the higher consumption associated with many general-purpose precision amplifiers.
The MC33171DT's 2.1 MHz gain-bandwidth product supports signal paths where moderate bandwidth is more important than nanovolt-level input noise. Its 2 V/µs slew rate gives it the capability to process larger voltage changes quickly, while its approximately 200 µA consumption supports low-power signal-conditioning systems. The common-mode input range extends toward the lower supply rail, enabling single-supply operation from 4 V to 44 V. Dual-rail operation is also possible over a stated range of ±2 V to ±22 V.
The 8-pin SOIC package provides a conventional surface-mount footprint for analog boards and simplifies assembly alongside mixed-signal components. Because this is a single-amplifier device, systems requiring multiple independent amplifier channels must use additional packages or a suitable multi-amplifier device. Designers should account for the operating voltage, common-mode range, output swing, stability with the selected feedback network, and external compensation requirements when designing a new circuit.
Typical applications include industrial process-control loops, low-power sensor interfaces, audio and communication signal conditioning, active filters, and general-purpose amplification stages. The extended supply capability is useful in industrial systems where signal levels may vary widely. The low 200 µA consumption is particularly relevant when the amplifier operates continuously from a compact or space-constrained power budget.
For reliable implementation, connect the supply pins to bypass capacitors and route feedback components to minimize parasitic effects. Maintain signal levels within the common-mode and output ranges, and verify stability with the actual load capacitance and source impedance. This page combines manufacturer specifications, package information, sourcing guidance, and practical design considerations for engineers evaluating the MC33171DT.
For design trade-offs, compare the MC33171DT with the related MC33172DT and MC33174DT family members before fixing the BOM. Each option should be selected according to the required gain, bandwidth, slew behavior, and application circuit rather than package availability alone.
Drop-in alternatifler için MC33171DT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MC33172DT
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC33174DT
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC33171DT Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Single general-purpose operational amplifier |
| Number of Circuits | 1 circuit |
| Input Transistor Type | Bipolar |
| Gain-Bandwidth Product | 2.1 MHz |
| Slew Rate | 2 V/µs |
| Low-Consumption Current | 200 µA |
| Single-Supply Operating Range | 4 V to 44 V |
| Dual-Supply Operating Range | ±2 V to ±22 V |
| Common-Mode Input Range | Extends down to the lower supply rail |
| Paket | 8-pin SOIC |
| Montaj Türü | Surface mount |
| Product Category | General-purpose amplifier |
MC33171DT 8-pin soic Pin Yapısı Kılavuzu
MC33171DT (8-pin soic paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MC33171DT.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC33171DT için uygundur 6 uygulamas: Industrial Process-Control Loops, Low-Power Sensor Signal Conditioning, Active Audio and Communication Filters, General-Purpose Instrumentation Amplification, Battery-Powered Analog Measurement, Power-Supply Monitoring and Control.
Industrial Process-Control Loops
The MC33171DT is appropriate for low-power industrial process-control blocks because it combines approximately 200 µA consumption with a 2.1 MHz gain-bandwidth product and a 2 V/µs slew rate. Place it in a feedback amplifier around a sensor or transducer, with the loop configured for the required closed-loop gain. Its input common-mode range extends down to the lower supply rail, which is useful when the measured signal sits near the signal-ground region. The designer should still verify output swing, load drive, and stability with the actual sensor impedance and wiring.
Önerilen
Low-Power Sensor Signal Conditioning
The MC33171DT can condition low-frequency sensor outputs where a 2.1 MHz bandwidth and 2 V/µs slew rate are sufficient without demanding the current consumption of a high-speed amplifier. Its approximately 200 µA operating current supports compact, continuously powered measurement systems. The common-mode input range extending toward the lower rail allows operation from a single supply beginning at 4 V, although the sensor output must remain within the input range. Buffering the sensor directly also makes pin-layout and offset-null treatment important.
Önerilen
Active Audio and Communication Filters
The MC33171DT can implement first-order and modest-bandwidth active filtering stages for audio or communication signals. Its 2.1 MHz gain-bandwidth product and 2 V/µs slew rate provide useful response beyond low-frequency-only operation while retaining approximately 200 µA consumption. Place feedback resistors and capacitors close to the amplifier pins to reduce parasitic effects, and confirm stability with the source and load impedances. The extended single-supply range also supports mixed-signal boards operating from 4 V to 44 V.
Önerilen
General-Purpose Instrumentation Amplification
The MC33171DT is suitable for instrumentation blocks that amplify a low-level differential signal when moderate speed and low consumption are more important than exceptionally low offset or bias current. Its 2.1 MHz gain-bandwidth product supports useful closed-loop bandwidth, while the bipolar input stage is intended for conventional precision-style feedback networks. Use the offset-null function only when required, because connecting it incorrectly can affect bias behavior. The signal input, output swing, and common-mode limits must all be checked during instrumentation design.
Önerilen
Battery-Powered Analog Measurement
The approximately 200 µA consumption of the MC33171DT makes it suitable for battery-powered analog measurement circuits that need more bandwidth than an ultra-low-power comparator or reference can provide. It can buffer a sensor or amplify a feedback-derived signal while operating from a single 4 V to 44 V source. Low quiescent demand helps preserve energy, but external divider, feedback, and sensor currents may dominate the total load. Confirm offset behavior over the intended temperature range and verify whether the load requires greater output-current capability.
Önerilen
Power-Supply Monitoring and Control
The MC33171DT can amplify the difference between a monitored power rail and a reference within a feedback-control or fault-detection circuit. Its wide single-supply operating range of 4 V to 44 V supports industrial power systems, and the common-mode range extending toward the lower rail simplifies sensing near ground. The 2 V/µs slew rate permits response to changes faster than a basic low-bandwidth amplifier. Design the sensing network so the amplifier never leaves its common-mode range, including during startup and fault conditions.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC33171DT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC33172DT | MC33174DT |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Type | Single bipolar operational amplifier | Single bipolar operational amplifier | Single bipolar operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit |
Ana Farklılayıcılar
- Combines low consumption with useful moderate bandwidth (karşılaştırma:MC33172DT)
- Single-amplifier 8-pin SOIC implementation (karşılaştırma:MC33174DT)
- Wide single-supply operating capability (karşılaştırma:MC33172DT)
Tasarım Notları
Place supply-bypass capacitors close to the amplifier's supply and ground pins, and keep the return current out of sensitive input traces. The device supports a 4 V to 44 V single supply or ±2 V to ±22 V dual supply, but the selected operating point must also satisfy the input common-mode and output-swing limits. Confirm quiescent current at the actual supply voltage because the manufacturer highlights approximately 200 µA as a family-level low-consumption characteristic.
Route the two input signals as a closely matched pair, especially when the source impedance is high. Keep feedback resistors and compensation components adjacent to the relevant pins, and use a solid ground plane to minimize parasitic coupling. The 8-pin SOIC footprint supports compact layouts, but the exposed signal path remains sensitive to long copper runs and nearby switching nodes. Follow the manufacturer recommended-layout and pin-description diagrams when assigning the PCB footprint.
Do not assume that a matching package alone guarantees an interchangeable amplifier. For MC33171DT, MC33172DT, and MC33174DT candidates, check closed-loop gain, stability, input bias current, offset voltage, output swing, and common-mode range. The family uses different gain-oriented characteristics, so changing the MPN can alter a feedback circuit even when the SOIC-8 land pattern remains unchanged.
Verify stability with the actual source impedance, load capacitance, and feedback network rather than relying only on the nominal gain-bandwidth product. A 2.1 MHz gain-bandwidth product and 2 V/µs slew rate provide substantial bandwidth, but an aggressive closed-loop gain or capacitive load can still alter response and oscillation margin. Measure the assembled circuit across its operating supply range and include source resistance in the simulation model.
Uyumluluk Bilgisi
The component is a general-purpose analog amplifier and is not an automotive-qualified AEC-Q100 variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established and therefore remain unknown.