onsemi

MC3488ADG - Dual RS-232/RS-423 Driver | onsemi

MPN: MC3488ADG ✗ End of Life
10.8 V to 13.2 V Vdss 8-pin SOIC Package
MOQ: 1 |

MC3488ADG Overview

onsemi MC3488ADG is a dual RS-232 and RS-423 line-driver interface IC with two drivers and no integrated receivers, supplied in an 8-pin SOIC surface-mount package. The device operates from a 10.8 V to 13.2 V supply and is specified for a 0 °C to 70 °C ambient-temperature range. Its two independent driver channels are intended for balanced and unbalanced digital data-interface systems.

A line driver is an interface IC that converts logic-level signals into voltage levels suitable for transmission over a wired communications link. Within the hierarchy of interface ICs, a driver sits below multi-channel transceiver and data-converter families and above discrete output-driver circuits. The MC3488ADG supports EIA/TIA-232 and EIA/TIA-423 signaling, allowing legacy serial equipment, industrial control links, and point-to-point data transmission to share a common interface device.

Key features include two driver outputs, a 10.8 V to 13.2 V supply range, and an 8-pin SOIC package for compact surface-mount layouts. The absence of integrated receivers means the device does not provide receive-side signal conditioning, termination, or slew control. Its specified 0 °C to 70 °C operating range makes it most appropriate for commercial-temperature equipment rather than extended industrial or automotive environments.

The MC3488ADG provides separate transmit channels for interfaces requiring independent driver outputs. In an RS-423 point-to-point arrangement, each driver can feed a balanced or appropriately terminated transmission line. In an RS-232 arrangement, the same pair of driver outputs can support unbalanced links when the surrounding system complies with the applicable EIA/TIA-232 interface requirements. The 8-pin SOIC footprint simplifies board assembly but requires care with trace routing, grounding, and protection against cable-borne transients.

Typical uses include legacy serial-port adapters, industrial data acquisition, isolated or protected remote I/O, test equipment, and embedded systems that need a dual RS-232 or RS-423 transmitter stage. The device is particularly suitable where two communication channels are needed without onboard receive channels and where a higher-voltage interface is preferred over a 3.3 V or 5 V logic-level driver.

Designers should verify the source and destination logic thresholds, cable length, grounding method, termination, and connector-level protection before assigning the outputs. Because the MC3488ADG is listed as obsolete, new production designs should first confirm lifecycle status and obtain an approved sourcing plan or select a current equivalent after a complete pin and electrical review.

This product overview consolidates the package, interface, lifecycle, and replacement information engineers need for initial design triage. It also distinguishes verified device facts from application-specific checks that must be completed against the original datasheet and the target transmission standard.

Drop-in alternatives for MC3488ADG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MC3488ADG (same form factor and footprint) — differing in Package, Device Type, Supply Voltage Range.

Texas Instruments
Package: 16-pin SOIC, 0.154 inch body width, 3.90 mm
Supply Voltage Range: 4.75 V to 5.25 V
Compare with MC3488ADG →
onsemi
Device Type: Dual single-ended line driver
Compare with MC3488ADG →

MC3488ADR2G

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC footprint and broadly matching dual-driver function; individual pin assignments and electrical limits require datasheet confirmation.

📋 Reference alternative (not in catalog)

MC3488AD

✅ Drop-In
onsemi
📦 8-pin SOIC
Dual single-ended line driver · 2 · EIA-423 and EIA-232D · X.26 and X.28 · FIDS1030 · 1.0 V/us to 100 V/us · Greater than 450 ohm · Supported

Contact for price

View Datasheet →

MC3487DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Quadruple differential line driver · 4 · 5 V single supply · 4.75 V to 5.25 V · ANSI TIA/EIA-422-B and ITU Recommendation V.11 · TTL-compatible buffered input · 3-state, high-impedance output · Fast transition time

Contact for price

View Datasheet →

UA9636ACD

✅ Drop-In
📦 8-pin SOIC
Cross-brand dual RS-232/RS-423 driver in 8-pin SOIC; output drive, slew-control, supply, and pin behavior may differ by approximately 20%.

📋 Reference alternative (not in catalog)

UA9636AC

✅ Drop-In
📦 8-pin SOIC
Cross-brand 8-pin SOIC dual line-driver candidate with similar protocol use; exact pinout and electrical ratings require side-by-side validation.

📋 Reference alternative (not in catalog)

MC3488ADG Specifications

Device Type Dual RS-232/RS-423 line driver
Supported Protocols RS-232, RS-423
Driver Count 2 drivers
Receiver Count 0 receivers
Supply Voltage Range 10.8 V to 13.2 V
Operating Temperature Range 0 °C to 70 °C
Package 8-pin SOIC
Mounting Type Surface mount
Product Status Obsolete
Description Dual EIA-423/EIA-232D line driver

MC3488ADG 8-pin soic Pin Configuration Guide

Pin configuration for MC3488ADG (8-pin soic package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

8-pin soic package pinout diagram for MC3488ADG

No detailed pinout data available for MC3488ADG.

Refer to the datasheet for full pin configuration.

Typical Applications

MC3488ADG is suitable for 6 applications: Legacy RS-232 Port Interface, Point-to-Point RS-423 Data Link, Industrial Data-Acquisition Equipment, Embedded Control Communications, Test and Measurement Front Ends, Protected Remote I/O Links.

💻

Legacy RS-232 Port Interface

The MC3488ADG fits a legacy RS-232 transmitter stage because it combines two driver outputs in an 8-pin SOIC and operates from a 10.8 V to 13.2 V supply. Each channel can convert a logic-level command into an RS-232-compatible line signal when the surrounding design satisfies the applicable interface specifications. Its two-driver arrangement supports equipment with separate transmit paths or dual serial ports without adding two separate driver packages. The zero-receiver count means the receive side must be implemented separately, and the 0 °C to 70 °C rating limits unrestricted use in industrial-temperature enclosures.

🌐

Point-to-Point RS-423 Data Link

The MC3488ADG is suitable for a point-to-point RS-423 transmit link because it provides two independent driver channels and a specified 10.8 V to 13.2 V supply range. In this topology, the logic source drives one channel, the transmitted signal travels over the balanced or appropriately configured line, and the receiving equipment supplies its own receiver and termination arrangement. Because the MC3488ADG contains no receivers, it does not handle bus arbitration or return-signal conditioning. The final design must confirm output amplitude, slew rate, data rate, cable length, and ground reference against the complete manufacturer datasheet.

🏭

Industrial Data-Acquisition Equipment

The MC3488ADG can provide two serial transmitter channels in compact industrial data-acquisition equipment with commercial-temperature requirements. Its 8-pin SOIC package reduces board area compared with two discrete driver packages, while the 10.8 V to 13.2 V supply range allows use with a regulated interface rail. The device is not a complete transceiver: the receiving instrument, galvanic isolation, surge protection, and termination must be designed separately. Its 0 °C to 70 °C specification should be checked against the enclosure temperature, and the obsolete lifecycle status makes a transition plan important for long-lived instrumentation.

🔧

Embedded Control Communications

The MC3488ADG is applicable to embedded controllers that must transmit commands to older RS-232 or RS-423 equipment. The controller can use one driver for status and another for commands, avoiding the need for separate packages when two transmit channels are required. Since the interface voltage supply is higher than common 3.3 V or 5 V logic rails, the design must include an appropriate regulated supply and must not connect the driver outputs directly to a microcontroller unless its levels and tolerances have been verified. The package is an 8-pin SOIC, so decoupling and ground-return routing remain critical to signal integrity.

📺

Test and Measurement Front Ends

The MC3488ADG can serve as a dual transmit stage in test equipment that commands external instruments over older serial interfaces. Its two driver channels support separate trigger and status paths, while the 0-receiver arrangement keeps receive circuitry independent. In an instrument chassis, maintain a controlled ground reference between connected equipment where the interface permits it, isolate the driver output from sensitive analog sections, and add connector-level transient protection for external cables. Before committing to the obsolete MC3488ADG, compare the current interface requirements with an active equivalent because instrument programs often require lifecycle continuity and traceable sourcing.

🧩

Protected Remote I/O Links

The MC3488ADG can be used in remote I/O equipment that transmits control or status information over an RS-423 link. The dual-driver structure allows one link to carry commands and another to carry acknowledgments when the remote unit uses separate physical paths, although a conventional full-duplex design may require separate receive circuitry. The device’s 10.8 V to 13.2 V supply range supports a dedicated interface rail, and its SOIC package fits densely populated control boards. For exposed cables, use surge and ESD protection, maintain the specified return path, and validate the receiver termination and cable length before deploying the link.

What is the onsemi MC3488ADG?
The onsemi MC3488ADG is a dual RS-232 and RS-423 line-driver IC with two transmit drivers and no integrated receivers. According to the manufacturer datasheet listing, it is packaged in an 8-pin SOIC, operates from a 10.8 V to 13.2 V supply, and has a specified operating-temperature range of 0 °C to 70 °C. It is used where a system needs to convert logic signals into serial-interface driver levels rather than perform signal reception.
What are the key specifications of MC3488ADG that engineers should know?
The MC3488ADG is a 2-channel, 0-receiver RS-232/RS-423 line driver in an 8-pin SOIC package. Its specified supply range is 10.8 V to 13.2 V, and its operating-temperature range is 0 °C to 70 °C. The manufacturer datasheet listing identifies it as a dual EIA-423/EIA-232D line driver. Data rate, slew rate, output-current, and logic-threshold details must be taken from the complete manufacturer datasheet before final interface timing and load calculations.
What is the operating voltage of MC3488ADG?
The MC3488ADG operates from a 10.8 V minimum supply to a 13.2 V maximum supply. The manufacturer datasheet listing specifies this 10.8 V to 13.2 V range for the dual EIA-423/EIA-232D line driver. Designers should design the system supply so that it remains within these limits under startup, load, and supply-transient conditions, and should confirm the circuit requirements for input thresholds and output levels in the complete datasheet.
What is the package and pin count of MC3488ADG?
The MC3488ADG is supplied in an 8-pin SOIC surface-mount package. The manufacturer datasheet listing identifies the case as 8-SOIC and describes the device as a dual line driver. Because the visible search result does not reproduce every pin name, use the manufacturer pin-description table when assigning inputs, outputs, supply pins, and grounds; do not infer pin functions solely from channel order.
Where can I download the MC3488ADG datasheet PDF?
The MC3488ADG datasheet can be reached through the linked manufacturer-datasheet record, which identifies the document as a six-page MC3488ADG data sheet for ON Semiconductor. Direct PDF mirrors are also linked from the product search results. Compare document identifiers and revision markings before using a mirrored copy, and use the ON Semiconductor original for production release, qualification, and design-reference purposes.
Where can I find the MC3488ADG pinout?
The MC3488ADG pinout is presented in the pin-description section of the manufacturer data sheet for the 8-pin SOIC package. The package listing confirms that the device has eight pins, but the exact signal-to-pin mapping should be taken directly from that table. When assigning PCB tracks, also identify every supply and ground connection and check the exposed requirements for unused channels according to the complete datasheet.
Is MC3488ADG suitable for RS-232 and RS-423 interfaces?
Yes, the MC3488ADG is intended for RS-232 and RS-423 transmit-interface applications. According to the manufacturer datasheet listing, it is a dual EIA-423/EIA-232D line driver with two independent driver outputs. Suitability for a specific link still depends on data rate, cable length, grounding, termination, logic thresholds, and protection requirements, which must be verified against the complete electrical specification.
Does MC3488ADG contain receivers?
No, the MC3488ADG contains two drivers and zero receivers. The DigiKey Marketplace result identifies it as a 2/0 RS-232 and RS-423 driver, while the manufacturer description calls it a dual line driver. A receive path must therefore be provided separately when the equipment supports bidirectional communication, signal conditioning, or bus contention handling.
What can replace the MC3488ADG?
The MC3488ADR2G is a documented same-manufacturer candidate that retains the same SOIC package and substantially similar functional characteristics, while MC3488AD is another closely related onsemi variant listed for comparison. Because the MC3488ADG is obsolete, verify the replacement’s exact pin assignment, supply limits, temperature range, output levels, slew rate, and lifecycle status before production release. Do not treat a package match alone as proof of drop-in compatibility.
Can MC3488ADG be replaced by MC3488ADR2G?
The MC3488ADR2G can be a candidate replacement because comparison information identifies matching package and functional characteristics. Before treating it as a drop-in replacement, compare the complete pin description and electrical tables, especially supply voltage, operating temperature, input thresholds, output levels, slew rate, and unused-pin requirements. The MC3488ADG is obsolete, so documentation review and change-control approval are necessary before substitution.
What is the best Texas Instruments equivalent for MC3488ADG?
The UA9636ACD is a Texas Instruments dual RS-232/RS-423 line driver identified in the cross-reference results as a closely related SOIC alternative. Pin compatibility and electrical equivalence must still be confirmed from both data sheets, particularly output drive level, slew control, supply range, temperature grade, and channel-enable behavior. Use it as a candidate for design review rather than an unconditional substitution.
MC3488ADG vs MC3487DR — which is more suitable?
The MC3487DR is a related onsemi interface-driver candidate, but its driver count, supported protocol, supply range, and pin behavior must be compared with the MC3488ADG before selection. The MC3488ADG is specifically identified as a two-driver, zero-receiver RS-232/RS-423 device in an 8-pin SOIC. If the replacement does not preserve those functions and pin assignments exactly, a PCB or schematic change may be required.
When should I choose MC3488ADG over MC3488ADR2G?
Choose MC3488ADG only when maintaining an existing MC3488ADG-based design is necessary, documented supply is available, and the lifecycle risk is formally accepted. For new production, MC3488ADR2G should be considered first when its complete specifications satisfy the interface requirements and it has an acceptable sourcing plan. The principal trade-off is continuity of the known configuration versus current lifecycle availability.
Where can I buy MC3488ADG and what is its price?
Use the Request a Quote form on this page to request MC3488ADG availability, MOQ, lead time, and a current quotation. The MC3488ADG is listed as obsolete, so stock and delivery timing may vary substantially. No fixed price should be assumed from legacy listings, and a replacement part should be reviewed before placing a new production order.
What is the lead time for MC3488ADG?
The current MC3488ADG lead time must be confirmed through the Request a Quote form on this page. The device is listed as obsolete, so lead time depends on remaining factory inventory, lot traceability, packaging availability, and approved sourcing channels. For an active production program, request both the obsolete part’s supply plan and a drop-in replacement review rather than relying on a historical availability statement.
Is MC3488ADG still active or obsolete?
The MC3488ADG is listed as obsolete. This status means it is not positioned as an active new-design component and that long-term continuity requires explicit supply-chain planning. According to the manufacturer-oriented component listing, the product status is obsolete. Use the Request a Quote form for lot availability and request current equivalent options for engineering review.

Engineering reference data for MC3488ADG — comparison, design guidance, and compliance information.

Selection Guide

Choose the MC3488ADG when maintaining a proven transmit-only RS-232 or RS-423 design and documented obsolete-part supply is acceptable. Its defining combination is two drivers, zero receivers, a 10.8 V to 13.2 V supply, and an 8-pin SOIC package. For new production, evaluate MC3488ADR2G first because it is the closest same-manufacturer candidate with matching package and broadly similar characteristics, subject to complete pin and electrical comparison. Consider MC3488AD only after confirming its exact ordering code, temperature grade, lifecycle status, and pin behavior. MC3487DR should be used only if its driver configuration and ratings satisfy the interface. For a cross-brand path, review UA9636ACD or UA9636AC for output drive, slew control, supply requirements, and pin compatibility. None of these options should be released without a documented comparison of the complete manufacturer data sheets.

Comparison with Alternatives

Parameter This Product MC3488ADR2G MC3488AD MC3487DR UA9636ACD
Brand onsemi onsemi onsemi onsemi Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Key Differentiators

  • Two transmit drivers without integrated receivers (vs MC3487DR)
  • Documented same-footprint onsemi replacement path (vs MC3488ADR2G)
  • Established RS-232 and RS-423 compatibility (vs UA9636ACD)

Design Notes

Place the MC3488ADG close to the logic source and the output-routing network, and keep the ground return short and continuous. The 8-pin SOIC device uses a 10.8 V to 13.2 V supply, so provide local decoupling and route the supply and ground pins directly to the relevant planes. Keep sensitive analog and high-speed digital traces away from the driver outputs where practical.

Verify output amplitude, slew rate, logic thresholds, data rate, cable length, and termination directly from the complete manufacturer datasheet. The MC3488ADG has drivers but no receivers, so each receive path needs its own receiver and network. Do not assume that an RS-423 output can drive an RS-232 receiver without checking voltage levels, ground reference, and network impedance.

Do not treat the 8-pin SOIC footprint as proof of pin-for-pin equivalence across all listed alternatives. Compare pin names and positions, unused-channel requirements, supply current, output drive, and temperature grade before substitution. Also treat the obsolete status as a supply-chain issue: request lot traceability and a production continuity plan before committing new builds to the MC3488ADG.

Route each driver output as a short, controlled transmission-line segment away from sensitive circuitry, and place connector-side protection near the external cable interface rather than beside the IC. Confirm the grounding strategy for connected equipment and evaluate common-mode transients in the intended installation. ESD and surge protection components must be selected for the interface voltage and line impedance rather than added by capacitance alone.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is a commercial-temperature interface IC; automotive qualification is not indicated. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

MC3488ADG datasheet MC3488ADG pinout MC3488ADG datasheet pdf MC3488ADG equivalent MC3488ADG replacement MC3488ADG cross reference MC3488ADG vs MC3487DR MC3488ADG vs UA9636ACD onsemi MC3488ADG MC3488ADG 8-SOIC MC3488ADG RS-232 driver MC3488ADG price MC3488ADG stock MC3488ADG obsolete

Related Components & Terms

onsemi MC3488ADG MC3488ADR2G MC3488AD MC3487DR UA9636ACD UA9636AC Texas Instruments RS-232 RS-423 EIA/TIA-232D EIA/TIA-423 line driver interface IC RS-232 interface IC transceiver semiconductor 8-pin SOIC SOIC package surface mount SMD serial interface point-to-point link logic-level signal RS-423 driver RS-232 driver
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details