NXP Semiconductors

MC9S08RC60CFG - 8-Bit 8MHz 60KB Flash MCU | NXP

MPN: MC9S08RC60CFG ✗ End of Life
1.8 V to 3.6 V Vdss 44-LQFP (10 x 10 mm) Package 8 MHz Speed 60 KB (60K x 8) Memory
MOQ: 1 |

MC9S08RC60CFG Overview

The NXP Semiconductors MC9S08RC60CFG is an 8-bit S08 microcontroller operating at 8 MHz with 60 KB of embedded Flash memory in a 44-LQFP 10 x 10 mm package. It is designed for embedded control applications requiring deterministic operation, 39 I/O pins, and a 1.8 V to 3.6 V operating supply.

An S08 microcontroller is an 8-bit embedded processor within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. This device combines flash program memory with integrated digital peripherals in a compact low-power package. Its 1.8 V to 3.6 V supply range makes it applicable to low-voltage consumer, industrial-control, appliance, and communications equipment where logic-level peripherals and sensors operate close to the MCU supply.

Key features include an 8 MHz core, 60 KB of programmable Flash organized as 60K x 8, and 39 I/O pins. The 44-LQFP package provides a conventional gull-wing lead arrangement and a 10 x 10 mm body size. Its large pin count allows the design to connect multiple digital inputs, outputs, serial interfaces, timers, and external memory or communication peripherals without requiring a very large package.

The S08 architecture favors compact code footprints and embedded control rather than high-throughput application processing. With 8-bit data handling and 8 MHz operation, it is well suited to state machines, sensor conditioning systems, keypad controls, simple motor controllers, communication nodes, and supervisory circuits. Because it is a microcontroller, firmware determines the application function and peripheral configuration.

Typical applications include industrial controllers, building equipment, appliance control panels, motor and relay interfaces, communications modules, and compact embedded sensing systems. The 39 available I/O pins allow designers to distribute sensing and actuation functions while retaining the S08 platform’s relatively simple programming model and integrated on-chip resources.

Board design should preserve the manufacturer’s recommended decoupling and clock layout, and every signal connected to the 44 exposed leads should be reviewed against the package pin-assignment diagram. Because firmware configuration, interrupt priorities, and peripheral resource allocation determine practical performance, validate the complete design at the intended 1.8 V to 3.6 V operating range.

This page consolidates the exact package, memory, voltage, frequency, and I/O characteristics with practical application guidance, sourcing workflows, and a conservative drop-in assessment. It also identifies where footprint, firmware, and lifecycle confirmation remain necessary before production substitution.

Drop-in alternatives for MC9S08RC60CFG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

MC9S08RC60CFG Maximum Ratings & Electrical Characteristics

Product Type 8-bit S08 microcontroller
Maximum CPU Frequency 8 MHz
Flash Memory 60 KB (60K x 8)
Operating Supply Voltage 1.8 V to 3.6 V
Number of I/O Pins 39 pins
Package 44-LQFP (10 x 10 mm)
Total Terminal Count 44 terminals
Package Code LQFP
Lead Form Gull wing
Package Shape Square
Temperature Grade Industrial
Architecture 8-bit
Program Memory Type Embedded Flash
Mounting Type Surface mount
RoHS Status RoHS

MC9S08RC60CFG square Pin Configuration Guide

Pin configuration for MC9S08RC60CFG (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

square package pinout diagram for MC9S08RC60CFG

No detailed pinout data available for MC9S08RC60CFG.

Refer to the datasheet for full pin configuration.

Typical Applications

MC9S08RC60CFG is suitable for 6 applications: Industrial Machine Controller, Appliance Control Board, Sensor and Data Acquisition Node, Communications Interface Module, Motor and Relay Sequencer, Building and Access Control Panel.

🏭

Industrial Machine Controller

The MC9S08RC60CFG fits an industrial machine controller that must coordinate switches, interlocks, indicators, and actuator commands. Its 8 MHz S08 core provides deterministic control logic, while 60 KB of embedded Flash stores the operating state machine, diagnostic routines, and parameter tables. The 39 I/O pins allow several input groups and output banks to be connected without a separate programmable logic device. Operating from 1.8 V to 3.6 V supports low-voltage sensor and interface circuitry. During hardware design, assign each signal through the 44-LQFP pin-assignment table and isolate noisy relay or motor-drive stages from sensitive MCU traces.

🔧

Appliance Control Board

The MC9S08RC60CFG is appropriate for an appliance control board combining user inputs, displays, temperature sensing, and motor or heater sequencing. Embedded Flash provides room for a main state machine plus production configuration and diagnostics, while the 39 available I/O pins support keys, sensors, indicators, and discrete actuators. The low 1.8 V to 3.6 V operating range can simplify integration with low-voltage peripherals and digital sensors. Firmware should implement debouncing, watchdog recovery, thermal limits, and safe shutdown states. The legacy status of the processor makes lifecycle confirmation especially important for new appliance platforms with long service periods.

🧩

Sensor and Data Acquisition Node

The MC9S08RC60CFG can serve as the supervisory controller in a compact sensor node that gathers digital measurements and forwards processed results. Its 8 MHz processing rate is sufficient for supervisory sampling, filtering, status tracking, and protocol formatting, while 60 KB of Flash stores firmware and calibration information. The 39 I/O pins provide capacity for multiple sensor selects, alarm inputs, communications signals, and local indicators. A low-voltage 1.8 V to 3.6 V supply can support integration with modern digital sensors. Keep analog front ends separate from the MCU supply path and follow the manufacturer’s grounding, decoupling, and clock recommendations to prevent noisy loads from degrading measurement stability.

🌐

Communications Interface Module

The MC9S08RC60CFG is suitable for a communications interface module that handles configuration, status LEDs, handshake signals, and a serial link to a higher-level processor. Its 60 KB of embedded Flash is useful for protocol framing, address management, diagnostics, and parameter storage, while the 39 I/O pins reduce the need for external I/O expanders. The 1.8 V to 3.6 V supply range supports integration with low-voltage transceivers and logic. The S08 core should reserve sufficient interrupt latency for framing and timeout management. Verify the electrical limits of every connected transceiver and preserve separation between high-current interface drivers and sensitive MCU traces.

⚡

Motor and Relay Sequencer

The MC9S08RC60CFG can implement a compact motor or relay sequencer where ordered transitions, interlocks, current sensing, and fault reporting are more important than high computation throughput. The 8 MHz S08 core supports deterministic timing and state-machine execution, and its 60 KB of Flash accommodates motion sequences and diagnostic logic. With 39 I/O pins, the controller can connect position inputs, command lines, relay drivers, and status lamps. Use low-voltage logic for command signals and place transistor or driver stages away from the MCU. Firmware must include startup limits, stuck-contact detection, and safe-state transitions for every relay or motor output.

🏠

Building and Access Control Panel

The MC9S08RC60CFG can support a building or access-control panel with keypad inputs, door sensors, alarm outputs, status indicators, and a communications controller. Its 39 I/O pins provide substantial panel connectivity, while 60 KB of embedded Flash supports user-interface logic, event handling, configuration, and diagnostics. The 1.8 V to 3.6 V operating range permits low-voltage integration with external interface electronics. Design the firmware around debounced inputs, access-event logging, fail-secure behavior, and communication timeouts. Protect long cable-connected inputs from transients and keep relay or lock-driver returns separated from sensitive signal paths.

What is the MC9S08RC60CFG?
The MC9S08RC60CFG is an 8-bit S08 embedded microcontroller with an 8 MHz processor, 60 KB of embedded Flash memory, and 39 I/O pins. It operates from 1.8 V to 3.6 V and is housed in a 44-LQFP package measuring 10 x 10 mm. The DigiKey product listing identifies these core characteristics, making the device suitable for compact embedded-control systems that need several digital interfaces without a larger processor package.
What are the key specifications of MC9S08RC60CFG?
The key MC9S08RC60CFG specifications are an 8-bit S08 architecture, 8 MHz operating frequency, 60 KB of 60K x 8 embedded Flash, 39 I/O pins, and a 1.8 V to 3.6 V supply range. The device uses a 44-LQFP 10 x 10 mm surface-mount package and is identified as industrial grade. These parameters place it in the embedded-control class rather than the high-performance application-processor class.
Where can I download the MC9S08RC60CFG datasheet PDF?
The MC9S08RC60CFG datasheet is reachable through the Motorola MC9S08RC60 document listed on AllDataSheet, with the document landing page linked from this page. Use the manufacturer PDF when it is available through the NXP product archive. The pin-assignment, electrical-characteristics, clock, memory, and peripheral tables in that document are the controlling references for PCB layout and firmware configuration.
Where can I find the MC9S08RC60CFG pinout?
The MC9S08RC60CFG pinout is defined by its 44-LQFP package and the MC9S08RC60 datasheet pin-assignment diagram. The verified product listing confirms 44 gull-wing terminals in a 10 x 10 mm square package. Because the individual terminal names are not printed in the product listing, use the datasheet diagram when assigning power, ground, reset, clock, programming, and all 39 I/O connections.
Where can I buy MC9S08RC60CFG online?
The MC9S08RC60CFG can be requested through the Request a Quote form on this page. The form allows buyers to specify quantity, target package suffix, inspection requirements, and delivery needs without relying on a static marketplace listing. Because this is a legacy embedded processor, confirm current lifecycle, lot traceability, and original-device condition before committing it to a new production design.
What is the price of MC9S08RC60CFG?
Use the Request a Quote form on this page for the current MC9S08RC60CFG price and quantity availability. Pricing for legacy microcontrollers can vary with quantity, date code, traceable packaging, and component condition. The structured listing references on this page support technical review, while the quote workflow provides the current commercial response for the exact orderable MPN.
What is the lead time for MC9S08RC60CFG?
The current MC9S08RC60CFG lead time should be requested through the Request a Quote form on this page. Lead time can depend on factory inventory, remaining distribution stock, lot consistency, and whether traceable documentation is required. For an obsolete or legacy processor, request a written lead-time confirmation for the exact package suffix and quantity before building a schedule around an unconfirmed date.
Is MC9S08RC60CFG in stock?
Submit the MC9S08RC60CFG quantity and required date-code criteria through the Request a Quote form to determine current availability. The verified listings include stock-oriented marketplace entries, but they do not establish a stable, project-specific supply commitment. Obtain written confirmation of available quantity, packaging, traceability, and delivery schedule before starting production.
Is MC9S08RC60CFG suitable for industrial control applications?
The MC9S08RC60CFG is suitable for many industrial embedded-control applications because its listing identifies an industrial temperature grade, 39 I/O pins, and a 1.8 V to 3.6 V operating range. Its 8 MHz S08 core is appropriate for supervisory logic, sensors, relay interfaces, and communications support. Confirm the complete electrical limits and endurance requirements in the datasheet before qualification.
MC9S08RC60CFG vs MC9S08RC60CFGE - which is better?
Both MC9S08RC60CFG and MC9S08RC60CFGE listings identify an 8-bit S08 MCU with 8 MHz operation, 60 KB of Flash, 39 I/O pins, and a 44-LQFP 10 x 10 mm package. The final suffix requires review against ordering information because it can identify packing or orderable-grade differences. Confirm that the complete suffix provides the exact temperature grade, reel configuration, and production requirements of the target board.
When should I choose MC9S08RC60CFG over another 8-bit MCU?
Choose MC9S08RC60CFG when an existing S08 design requires 8 MHz operation, 60 KB of embedded Flash, 39 I/O pins, and the established 44-LQFP footprint. Its strongest justification is compatibility with an existing firmware and PCB ecosystem. For a new design, compare processor speed, memory, peripheral requirements, tooling availability, lifecycle status, and long-term procurement rather than selecting it solely for the S08 architecture.
What is the best drop-in replacement for MC9S08RC60CFG?
No verified pin-to-pin drop-in replacement for the MC9S08RC60CFG was identified in the available cross-reference results. An S08-family device with a similar function may differ in memory, peripheral mapping, clocking, pin multiplexing, and package dimensions. Before substituting any candidate, compare the full 44-terminal pin map, voltage range, Flash size, interrupt architecture, and firmware dependencies against the MC9S08RC60 datasheet.
Can another microcontroller replace MC9S08RC60CFG without PCB changes?
Another microcontroller can replace the MC9S08RC60CFG without PCB changes only if it is genuinely pin-to-pin compatible in the 44-LQFP footprint and matches the required electrical and firmware characteristics. A matching package name alone does not guarantee compatibility because peripheral signals and pin multiplexing may differ. No cross-brand drop-in candidate was confirmed, so treat a direct replacement as an engineering validation project rather than a catalog substitution.
What can replace the MC9S08RC60CFG in a legacy design?
The safest replacement path is to identify an S08-family device with the same 44-LQFP pin assignment, 8 MHz core speed, 60 KB or greater embedded Flash, and compatible 1.8 V to 3.6 V operation, then confirm peripheral and interrupt compatibility with the firmware. The available search results do not establish a validated drop-in equivalent. Treat the original part as a legacy procurement item unless a candidate passes schematic, timing, and firmware review.
Is there an NXP or Motorola equivalent for MC9S08RC60CFG?
The MC9S08RC60CFG is associated with the legacy Motorola and NXP S08 product line, but no separately documented drop-in equivalent was confirmed in the cross-reference results. An identical-looking distributor record for the same MPN does not constitute a different replacement. Validate any proposed NXP family member against the complete pin table, memory map, clock settings, peripheral assignments, and operating conditions before using it as an equivalent.

Engineering reference data for MC9S08RC60CFG — comparison, design guidance, and compliance information.

Selection Guide

Choose MC9S08RC60CFG when maintaining an established S08 design whose PCB depends on the 44-LQFP footprint, 39 I/O pins, 8 MHz processor, and 60 KB of embedded Flash. It is particularly suitable for legacy industrial, appliance, access-control, and communications equipment where changing the MCU would require extensive firmware and schematic validation. For a new design, first consider whether a currently supported processor provides the required peripherals and lifecycle assurance without forcing a board redesign. If a direct replacement is required, verify the complete pin map, power architecture, clock setup, memory map, interrupt behavior, and package suffix. Do not assume that another S08 member is drop-in compatible merely because it uses a 44-LQFP package.

Comparison with Alternatives

Parameter This Product
Product Type 8-bit S08 microcontroller
Brand NXP Semiconductors
Package 44-LQFP (10 x 10 mm)
Maximum CPU Frequency 8 MHz
Flash Memory 60 KB (60K x 8)
Operating Supply Voltage 1.8 V to 3.6 V
Number of I/O Pins 39 pins
Temperature Grade Industrial
Program Memory Type Embedded Flash

Key Differentiators

  • High I/O density for an 8-bit S08 controller (vs Lower-pin-count S08 devices)
  • Substantial embedded program memory (vs Lower-capacity 8-bit MCUs)
  • Compact 10 x 10 mm gull-wing package (vs Larger-outline legacy processor packages)
  • Direct operating range for low-voltage embedded systems (vs 5 V legacy MCU designs)

Design Notes

Follow the manufacturer’s 44-LQFP land pattern and pin-1 orientation exactly, using the package drawing rather than approximating from the square body dimensions. Reserve all 44 terminals even when a design uses only the 39 I/O functions, because the remaining terminals provide power, ground, reset, clock, and programming functions. Maintain short supply and ground connections, place decoupling capacitors close to their associated pins, and route clock and sensitive input traces away from switching-node and relay-drive currents.

Design the 1.8 V to 3.6 V supply path to remain within the device’s operating range under every load transient. Confirm which package terminals provide core and I/O supply connections in the datasheet before assigning power rails. Decouple each supply domain according to the manufacturer’s recommended capacitance and voltage rating. Estimated: if the MCU rail falls outside the permitted range during a relay, display, or motor transition, the fault can appear as code corruption or intermittent resets even though nominal board voltage appears correct.

Do not treat a matching 44-LQFP body as proof of drop-in compatibility. Before replacing MC9S08RC60CFG, compare every terminal, including supply, ground, reset, clock, programming, and peripheral functions, then review memory organization, interrupt vectors, timer behavior, and clock configuration. A different S08 member may use the same outline while presenting incompatible pin multiplexing. For an existing board, also check the complete ordering suffix for reel form, temperature grade, and lot requirements.

Separate high-current outputs from the MCU through appropriate transistor, MOSFET, or driver stages, and route their return currents away from the quiet ground area used by clock and sensing circuits. Keep external crystal or oscillator paths short and symmetrical when a clock source is used. For exposed board areas, use a stable ground plane and controlled return paths so that switching loads do not create ground potential differences across the 44-pin device.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LCSC product listing identifies the MC9S08RC60CFG as RoHS. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found in the available product information.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

MC9S08RC60CFG datasheet MC9S08RC60CFG pinout MC9S08RC60CFG datasheet pdf MC9S08RC60CFG equivalent MC9S08RC60CFG replacement MC9S08RC60CFG cross reference MC9S08RC60CFG footprint MC9S08RC60CFG price MC9S08RC60CFG stock NXP MC9S08RC60CFG MC9S08RC60CFG 8MHz 60KB Flash MC9S08RC60CFG 44-LQFP pinout MC9S08RC60CFG industrial controller

Related Components & Terms

NXP Semiconductors Motorola MC9S08RC60CFG MC9S08RC60CFGE MC9S08RC60 S08 microcontroller 8-bit microcontroller embedded processor semiconductor embedded Flash program memory 44-LQFP LQFP package family gull-wing lead surface-mount package industrial temperature grade 1.8 V to 3.6 V operation 8 MHz clock 39 I/O pins machine control appliance control sensor node serial communications motor sequencer access-control panel
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details