MC9S08RC60CFG - 8-Bit 8MHz 60KB Flash MCU | NXP
Référence : MC9S08RC60CFG ✗ Fin de vieMC9S08RC60CFG Présentation
An S08 microcontroller is an 8-bit embedded processor within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. This device combines flash program memory with integrated digital peripherals in a compact low-power package. Its 1.8 V to 3.6 V supply range makes it applicable to low-voltage consumer, industrial-control, appliance, and communications equipment where logic-level peripherals and sensors operate close to the MCU supply.
Key features include an 8 MHz core, 60 KB of programmable Flash organized as 60K x 8, and 39 I/O pins. The 44-LQFP package provides a conventional gull-wing lead arrangement and a 10 x 10 mm body size. Its large pin count allows the design to connect multiple digital inputs, outputs, serial interfaces, timers, and external memory or communication peripherals without requiring a very large package.
The S08 architecture favors compact code footprints and embedded control rather than high-throughput application processing. With 8-bit data handling and 8 MHz operation, it is well suited to state machines, sensor conditioning systems, keypad controls, simple motor controllers, communication nodes, and supervisory circuits. Because it is a microcontroller, firmware determines the application function and peripheral configuration.
Typical applications include industrial controllers, building equipment, appliance control panels, motor and relay interfaces, communications modules, and compact embedded sensing systems. The 39 available I/O pins allow designers to distribute sensing and actuation functions while retaining the S08 platform’s relatively simple programming model and integrated on-chip resources.
Board design should preserve the manufacturer’s recommended decoupling and clock layout, and every signal connected to the 44 exposed leads should be reviewed against the package pin-assignment diagram. Because firmware configuration, interrupt priorities, and peripheral resource allocation determine practical performance, validate the complete design at the intended 1.8 V to 3.6 V operating range.
This page consolidates the exact package, memory, voltage, frequency, and I/O characteristics with practical application guidance, sourcing workflows, and a conservative drop-in assessment. It also identifies where footprint, firmware, and lifecycle confirmation remain necessary before production substitution.
Alternatives de remplacement direct pour MC9S08RC60CFG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMC9S08RC60CFG Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit S08 microcontroller |
| Maximum CPU Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8) |
| Tension d'alimentation de fonctionnement | 1.8 V to 3.6 V |
| Number of I/O Pins | 39 pins |
| Boîtier | 44-LQFP (10 x 10 mm) |
| Total Terminal Count | 44 terminals |
| Package Code | LQFP |
| Lead Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Architecture | 8-bit |
| Program Memory Type | Embedded Flash |
| Type de montage | Surface mount |
| Statut RoHS | RoHS |
Guide de configuration des broches du MC9S08RC60CFG square
Configuration des broches du MC9S08RC60CFG (boîtier square). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08RC60CFG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08RC60CFG convient pour 6 applications: Industrial Machine Controller, Appliance Control Board, Sensor and Data Acquisition Node, Communications Interface Module, Motor and Relay Sequencer, Building and Access Control Panel.
Industrial Machine Controller
The MC9S08RC60CFG fits an industrial machine controller that must coordinate switches, interlocks, indicators, and actuator commands. Its 8 MHz S08 core provides deterministic control logic, while 60 KB of embedded Flash stores the operating state machine, diagnostic routines, and parameter tables. The 39 I/O pins allow several input groups and output banks to be connected without a separate programmable logic device. Operating from 1.8 V to 3.6 V supports low-voltage sensor and interface circuitry. During hardware design, assign each signal through the 44-LQFP pin-assignment table and isolate noisy relay or motor-drive stages from sensitive MCU traces.
Appliance Control Board
The MC9S08RC60CFG is appropriate for an appliance control board combining user inputs, displays, temperature sensing, and motor or heater sequencing. Embedded Flash provides room for a main state machine plus production configuration and diagnostics, while the 39 available I/O pins support keys, sensors, indicators, and discrete actuators. The low 1.8 V to 3.6 V operating range can simplify integration with low-voltage peripherals and digital sensors. Firmware should implement debouncing, watchdog recovery, thermal limits, and safe shutdown states. The legacy status of the processor makes lifecycle confirmation especially important for new appliance platforms with long service periods.
Sensor and Data Acquisition Node
The MC9S08RC60CFG can serve as the supervisory controller in a compact sensor node that gathers digital measurements and forwards processed results. Its 8 MHz processing rate is sufficient for supervisory sampling, filtering, status tracking, and protocol formatting, while 60 KB of Flash stores firmware and calibration information. The 39 I/O pins provide capacity for multiple sensor selects, alarm inputs, communications signals, and local indicators. A low-voltage 1.8 V to 3.6 V supply can support integration with modern digital sensors. Keep analog front ends separate from the MCU supply path and follow the manufacturer’s grounding, decoupling, and clock recommendations to prevent noisy loads from degrading measurement stability.
Communications Interface Module
The MC9S08RC60CFG is suitable for a communications interface module that handles configuration, status LEDs, handshake signals, and a serial link to a higher-level processor. Its 60 KB of embedded Flash is useful for protocol framing, address management, diagnostics, and parameter storage, while the 39 I/O pins reduce the need for external I/O expanders. The 1.8 V to 3.6 V supply range supports integration with low-voltage transceivers and logic. The S08 core should reserve sufficient interrupt latency for framing and timeout management. Verify the electrical limits of every connected transceiver and preserve separation between high-current interface drivers and sensitive MCU traces.
Motor and Relay Sequencer
The MC9S08RC60CFG can implement a compact motor or relay sequencer where ordered transitions, interlocks, current sensing, and fault reporting are more important than high computation throughput. The 8 MHz S08 core supports deterministic timing and state-machine execution, and its 60 KB of Flash accommodates motion sequences and diagnostic logic. With 39 I/O pins, the controller can connect position inputs, command lines, relay drivers, and status lamps. Use low-voltage logic for command signals and place transistor or driver stages away from the MCU. Firmware must include startup limits, stuck-contact detection, and safe-state transitions for every relay or motor output.
Building and Access Control Panel
The MC9S08RC60CFG can support a building or access-control panel with keypad inputs, door sensors, alarm outputs, status indicators, and a communications controller. Its 39 I/O pins provide substantial panel connectivity, while 60 KB of embedded Flash supports user-interface logic, event handling, configuration, and diagnostics. The 1.8 V to 3.6 V operating range permits low-voltage integration with external interface electronics. Design the firmware around debounced inputs, access-event logging, fail-secure behavior, and communication timeouts. Protect long cable-connected inputs from transients and keep relay or lock-driver returns separated from sensitive signal paths.
Données de référence d'ingénierie pour MC9S08RC60CFG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Product Type | 8-bit S08 microcontroller |
| Brand | NXP Semiconductors |
| Package | 44-LQFP (10 x 10 mm) |
| Maximum CPU Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8) |
| Operating Supply Voltage | 1.8 V to 3.6 V |
| Number of I/O Pins | 39 pins |
| Temperature Grade | Industrial |
| Program Memory Type | Embedded Flash |
Principaux différenciateurs
- High I/O density for an 8-bit S08 controller (vs Lower-pin-count S08 devices)
- Substantial embedded program memory (vs Lower-capacity 8-bit MCUs)
- Compact 10 x 10 mm gull-wing package (vs Larger-outline legacy processor packages)
- Direct operating range for low-voltage embedded systems (vs 5 V legacy MCU designs)
Notes de conception
Follow the manufacturer’s 44-LQFP land pattern and pin-1 orientation exactly, using the package drawing rather than approximating from the square body dimensions. Reserve all 44 terminals even when a design uses only the 39 I/O functions, because the remaining terminals provide power, ground, reset, clock, and programming functions. Maintain short supply and ground connections, place decoupling capacitors close to their associated pins, and route clock and sensitive input traces away from switching-node and relay-drive currents.
Design the 1.8 V to 3.6 V supply path to remain within the device’s operating range under every load transient. Confirm which package terminals provide core and I/O supply connections in the datasheet before assigning power rails. Decouple each supply domain according to the manufacturer’s recommended capacitance and voltage rating. Estimated: if the MCU rail falls outside the permitted range during a relay, display, or motor transition, the fault can appear as code corruption or intermittent resets even though nominal board voltage appears correct.
Do not treat a matching 44-LQFP body as proof of drop-in compatibility. Before replacing MC9S08RC60CFG, compare every terminal, including supply, ground, reset, clock, programming, and peripheral functions, then review memory organization, interrupt vectors, timer behavior, and clock configuration. A different S08 member may use the same outline while presenting incompatible pin multiplexing. For an existing board, also check the complete ordering suffix for reel form, temperature grade, and lot requirements.
Separate high-current outputs from the MCU through appropriate transistor, MOSFET, or driver stages, and route their return currents away from the quiet ground area used by clock and sensing circuits. Keep external crystal or oscillator paths short and symmetrical when a clock source is used. For exposed board areas, use a stable ground plane and controlled return paths so that switching loads do not create ground potential differences across the 44-pin device.
Informations de conformité
The LCSC product listing identifies the MC9S08RC60CFG as RoHS. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found in the available product information.