MCP3422A2-E/SN - 18-Bit Dual Delta-Sigma ADC | Microchip
MPN: MCP3422A2-E/SN ✓ ActiveMCP3422A2-E/SN Overview
A delta-sigma ADC is a mixed-signal data-acquisition IC that uses continuous-time integration and noise shaping to achieve high resolution without requiring a high-frequency flash or successive-approximation conversion core. Within the ADC hierarchy, this device belongs to the precision low-speed converter class: sigma-delta ADC, differential ADC, low-noise ADC, and power-management-compatible analog front end. Its internal reference establishes a differential input range of plus or minus 2.048 V.
The MCP3422A2-E/SN supports 18-bit resolution, two analog input channels, a 4 sps conversion rate, and differential measurement. These characteristics suit precision instrumentation rather than high-bandwidth waveform capture. Differential inputs can reject common-mode disturbance when the sensor source is arranged around the common-mode voltage, while the integrated 2.048 V reference simplifies systems that do not require an external precision reference.
The device operates from a single 3.3 V or 5 V supply and communicates through a two-wire I2C-compatible interface. Its 8-pin SOIC package reduces board area compared with larger converter packages, but the analog input and reference network still require careful routing. The low conversion rate is a deliberate trade-off: it supports accurate measurements and noise rejection but is not appropriate for sampling fast-changing signals.
Typical applications include industrial pressure and temperature transmitters, low-frequency sensor acquisition, weighing systems, laboratory measurement equipment, and battery-powered monitoring products. In these systems, the converter can digitize differential sensor outputs while the I2C interface transfers results to a microcontroller or embedded control system. A local microcontroller can then apply calibration, filtering, diagnostics, and data logging without requiring a separate high-resolution ADC.
For implementation, place the analog input traces away from switching nodes and route the differential pair as a compact pair with uninterrupted ground reference. Confirm that the common-mode voltage remains inside the device operating limits, and calculate conversion latency before scheduling multiple channels. The 4 sps rate means each differential conversion requires 250 ms, so dual-channel sequential sampling may require substantially more than that total measurement interval.
This product page combines the manufacturer specifications, package and interface details, family-member alternatives, comparison criteria, and application-focused engineering guidance. It is intended to accelerate component selection, schematic review, PCB planning, and sourcing for precision, low-speed differential measurement designs.
Drop-in alternatives for MCP3422A2-E/SN — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCP3422A2-E/SN (same form factor and footprint) — differing in Package, Conversion Rate, Differential Input Range, Digital Interface, Operating Temperature Range.
MCP3422A0-E/SN
✅ Drop-InContact for price
View Datasheet →MCP3422A1-E/SN
✅ Drop-InContact for price
View Datasheet →MCP3422A2-E/MS
✅ Drop-InContact for price
View Datasheet →MCP3422A2T-E/MS
✅ Drop-In📋 Reference alternative (not in catalog)
MCP3422A5-E/MC
✅ Drop-InContact for price
View Datasheet →MCP3422A2-E/SN Maximum Ratings & Electrical Characteristics
| Resolution | 18 bit |
| Number of Analog Input Channels | 2 |
| Input Architecture | Differential |
| Converter Type | Delta-sigma ADC |
| Conversion Rate | 4 samples per second |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | -2.048 V to +2.048 V |
| Supply Voltage | 3.3 V or 5 V |
| Supply Configuration | Single supply |
| Digital Interface | Two-wire I2C-compatible |
| Package | 8-pin SOIC |
| Mounting Type | Surface mount |
| Automotive Qualification | Automotive-rated |
MCP3422A2-E/SN 8-pin soic Pin Configuration Guide
Pin configuration for MCP3422A2-E/SN (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for MCP3422A2-E/SN.
Refer to the datasheet for full pin configuration.
Typical Applications
MCP3422A2-E/SN is suitable for 6 applications: Industrial Pressure Transmitters, Precision Temperature Measurement, Precision Weighing Systems, Battery-Powered Environmental Sensors, Laboratory Measurement Instruments, Process Control Monitoring.
Industrial Pressure Transmitters
The MCP3422A2-E/SN fits industrial pressure transmitters that digitize a low-level differential sensor signal rather than high-bandwidth waveforms. Its 18-bit resolution and differential inputs support accurate measurement of bridge or pressure-cell outputs, while the 2.048 V internal reference simplifies systems that would otherwise require a separate reference device. Place the converter behind the transmitter input filter and route both analog inputs as a compact pair. The 4 sps conversion rate provides ample time for stable readings but requires a 250 ms interval per selected conversion, so sequential dual-channel acquisition may take longer.
Recommended
Precision Temperature Measurement
The MCP3422A2-E/SN is appropriate for resistance-based or voltage-based temperature sensing where resolution and differential rejection matter more than rapid sampling. Its 18-bit conversion resolution can resolve small changes from RTD, thermistor, or bridge networks, and its differential inputs help suppress common-mode noise when the sensor is properly biased. The internal 2.048 V reference supports a self-contained measurement channel. At 4 sps, each selected channel needs 250 ms for conversion, making the device most appropriate for thermal monitoring rather than fast thermal-transient analysis.
Recommended
Precision Weighing Systems
The MCP3422A2-E/SN can serve as the ADC in a slow precision weighing system using a strain-gauge bridge and low-noise analog front end. Differential input handling is valuable because bridge excitation and ground noise can introduce common-mode signals that should not dominate the measurement. The 18-bit resolution supports fine resolution over a narrow load-cell range, while the onboard 2.048 V reference removes one external component from a new design. Because the converter operates at 4 sps, it suits static or slowly changing weights rather than dynamic vibration analysis.
Recommended
Battery-Powered Environmental Sensors
The MCP3422A2-E/SN supports battery-powered environmental monitoring when the measured signal changes slowly and high resolution improves usability. A differential sensor output can be digitized while the I2C-compatible interface transfers readings to a low-power microcontroller. The single 3.3 V or 5 V supply and 8-pin SOIC package help reduce board complexity, but the complete power budget must include sensor excitation, external filtering, and the converter's operating current. Duty-cycling the device is preferable when the monitored quantity does not require continuous 4 sps sampling.
Recommended
Laboratory Measurement Instruments
The MCP3422A2-E/SN is useful in laboratory instruments that measure slow analog quantities with high resolution and modest board space. Two differential channels allow related voltages to be acquired without using two separate converter packages, and the I2C-compatible interface integrates naturally with a measurement controller. The 2.048 V onboard reference simplifies a new prototype, although production designs should evaluate reference accuracy and temperature drift against the measurement budget. The 4 sps rate is appropriate for set-and-read instruments, calibration loops, and laboratory logging that do not require high-speed waveforms.
Recommended
Process Control Monitoring
The MCP3422A2-E/SN can monitor slow process variables such as tank level, flow differential pressure, or thermistor-derived temperature in industrial control systems. Its differential inputs are well suited to sensors located near noisy motors or switching equipment because common-mode disturbance can be rejected when the sensor and wiring are balanced. The I2C-compatible interface allows the controller to read both channels sequentially, while the 8-pin SOIC package simplifies standardized analog input modules. The slow 4 sps rate means loop updates must be scheduled around conversion time, so it is preferable for supervisory monitoring than fast closed-loop control.
Recommended
Recommended Products Summary
Engineering reference data for MCP3422A2-E/SN — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCP3422A0-E/SN | MCP3422A1-E/SN | MCP3422A2-E/MS | MCP3422A2T-E/MS | MCP3422A5-E/MC |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Key Differentiators
- Higher nominal resolution within the directly compared MCP3422 family variants (vs MCP3422A0-E/SN)
- Two differential channels in a compact 8-pin package (vs MCP3422A5-E/MC)
- Onboard precision reference simplifies standalone acquisition (vs MCP3422A1-E/SN)
Design Notes
Route the two analog inputs as a tightly coupled differential pair over a continuous ground plane. Place input filtering and protection components close to the MCP3422A2-E/SN pins, and keep the path away from switching-regator outputs, relay contacts, and high-current return conductors. Differential rejection depends on matched geometry and a low-impedance reference return, so a wide trace alone cannot replace careful common-mode control.
Check both differential range and common-mode range before connecting the sensor. The 2.048 V onboard reference defines a -2.048 V to +2.048 V differential range, but each input must remain within the allowable common-mode window for the selected supply. If the sensor output can exceed that window, add level shifting or a suitable front end rather than relying on absolute maximum ratings.
Do not schedule the converter as if it were a high-speed ADC. At 4 sps, one selected conversion takes 250 ms; measuring both channels sequentially can require more than 500 ms before software corrections and averaging. Also avoid changing input selection while a conversion is active unless the manufacturer command sequence explicitly supports that operating mode.
Follow the manufacturer bypass recommendations at the supply pins and place the decoupling capacitor close to the device. Because this is a precision measurement converter, supply noise can appear as input-referred error and degrade the benefit of 18-bit nominal resolution. Use a low-noise supply and verify the analog and digital return-current paths during board bring-up.
Compliance Information
The exact MCP3422A2-E/SN listing identifies the device as automotive-rated. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product references and require confirmation from Microchip.