MCP3422A3-E/MS - 18-Bit Dual-Input ADC | Microchip Technology
MPN: MCP3422A3-E/MS ✓ ActiveMCP3422A3-E/MS Overview
An ADC converts an analog voltage into a digital code for measurement, control, logging, or display. The MCP3422 belongs to the sigma-delta ADC hierarchy within data-converter and mixed-signal semiconductor families. Its differential measurement capability supports sensing of small voltage changes between two nodes, while the I2C interface allows the converter to connect efficiently to microcontrollers, sensors, and industrial measurement systems.
Key features include resolution up to 18 bits, two differential input channels, an onboard 2.048 V reference, and a differential input range of ±2.048 V. The low-noise architecture is intended for precision acquisition rather than high-speed waveform capture. The A3 conversion-speed option provides 3.75 samples per second, making it appropriate for slowly changing process, temperature, pressure, and strain signals.
The device uses a sigma-delta modulation and digital filtering approach to achieve high resolution from a low-speed measurement system. An internal multiplexer routes the selected differential channel into the converter, and an internal programmable gain amplifier allows the analog front end to match the signal range. The I2C interface reduces wiring requirements while providing a straightforward connection to embedded processors.
Typical applications include industrial process monitoring, environmental sensors, portable instrumentation, bridge-sensor signal acquisition, and low-rate battery-powered measurement. The automotive qualification indicated for this variant supports designs requiring AEC-Q100-qualified components, although individual operating requirements should be confirmed against the manufacturer documentation.
Design the analog input path for low noise and correct common-mode range. Keep analog traces short, maintain a quiet reference and supply return, use suitable input filtering, and verify that source impedance remains acceptable for the selected gain and conversion speed. The MSOP package also requires a land pattern that follows the manufacturer pin and exposed-pad guidance.
This page combines the manufacturer product information, distributor listings, package details, application guidance, and substitution analysis into a practical engineering reference for selecting and implementing the MCP3422A3-E/MS.
Drop-in alternatives for MCP3422A3-E/MS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCP3422A3-E/MS (same form factor and footprint) — differing in Differential Input Range, Digital Interface.
MCP3422A1-E/MS
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →MCP3422A2T-E/MS
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MCP3422A5T-E/MS
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MCP3422A3-E/MS Maximum Ratings & Electrical Characteristics
| ADC Resolution | 18 bit |
| Number of Input Channels | 2 |
| Input Type | Differential |
| Architecture | Sigma-delta |
| Conversion Rate | 3.75 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Interface | I2C |
| Package | 8-MSOP |
| Package Terminal Count | 8 |
| Package Form | Gull wing |
| Package Shape | Square |
| Package Code | SOP |
| Shipping Package | Tube |
| Temperature Grade | Automotive |
| Automotive Qualification | AEC-Q100 |
| Mounting Type | Surface mount |
MCP3422A3-E/MS tube Pin Configuration Guide
Pin configuration for MCP3422A3-E/MS (tube package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for MCP3422A3-E/MS.
Refer to the datasheet for full pin configuration.
Typical Applications
MCP3422A3-E/MS is suitable for 6 applications: Industrial Process Monitoring, Temperature and Environmental Sensing, Bridge Sensor Acquisition, Portable Instrumentation, Automotive Sensor Interface, Battery-Powered Data Logging.
Industrial Process Monitoring
The MCP3422A3-E/MS fits slow industrial measurements where 18-bit resolution and a 3.75-sample-per-second rate provide useful resolution without requiring high-speed conversion. Its two differential inputs can monitor two bridge or process-sensor channels, rejecting common-mode voltage on long industrial wiring. The 2.048 V internal reference establishes a stable measurement basis, while the 2.7 V to 5.5 V supply range supports embedded control systems. Place input filtering near the converter, verify source impedance for the selected gain, and route the I2C bus away from switching nodes.
Recommended
Temperature and Environmental Sensing
The MCP3422A3-E/MS is appropriate for temperature, humidity, pressure, and gas-sensor systems whose signals change over seconds rather than milliseconds. Its 18-bit resolution can preserve small changes from resistive sensors, while the differential inputs help reject noise common to both sensor terminals. The 3.75-sample-per-second rate supports periodic environmental updates without excessive power use. Designers should enable suitable digital or analog filtering, check offset and gain calibration requirements, and place the converter away from heat sources that could create temperature gradients across the board.
Recommended
Bridge Sensor Acquisition
The MCP3422A3-E/MS can acquire small differential signals from strain, load-cell, and resistive bridge sensors because it provides two differential channels and up to 18-bit resolution. The onboard 2.048 V reference can excite compatible sensor circuitry or provide a measurement reference, depending on the bridge design. Differential signal handling reduces sensitivity to common-mode noise present around industrial sensors. The 3.75-sample-per-second conversion rate suits static force and slow mechanical loading. Confirm the bridge excitation voltage, programmable-gain setting, input current limits, and source impedance before committing the analog front end.
Recommended
Portable Instrumentation
The MCP3422A3-E/MS suits portable laboratory and field instruments that require precise but relatively slow readings. The 2.7 V minimum supply supports integration with compact mixed-signal systems, while the 3.75-sample-per-second rate can capture slowly varying voltage, current, or resistance measurements. The 8-MSOP package preserves board area, and the I2C interface permits connection to a host processor without many signal lines. Use a clean reference and supply arrangement, account for warm-up and calibration behavior, and define filtering so the displayed result is responsive without exposing unnecessary noise.
Recommended
Automotive Sensor Interface
The MCP3422A3-E/MS is identified as an automotive-grade AEC-Q100 component, making it applicable to qualified low-speed sensor acquisition in vehicle electronics. Two differential channels can support redundant or multiplexed sensing, while the 3.75-sample-per-second rate is suitable for parameters such as temperature, pressure, and position. The 8-MSOP package supports compact electronic modules, and I2C simplifies host-controller integration. Automotive implementation still requires system-level review of transient protection, ground strategy, EMI behavior, diagnostics, and qualification requirements beyond the device's AEC-Q100 status.
Recommended
Battery-Powered Data Logging
The MCP3422A3-E/MS can support battery-powered environmental and industrial loggers because it combines 18-bit resolution with a modest 3.75-sample-per-second conversion rate. Differential inputs reduce susceptibility to shared ground and coupling noise in multi-channel sensor wiring, while I2C provides a compact interface to low-power microcontrollers. The 2.7 V to 5.5 V operating range permits use across common supply levels. Duty-cycle acquisitions where practical, use a quiet local supply for the converter and reference, and account for the device's power consumption and temperature behavior in the battery budget.
Recommended
Recommended Products Summary
Engineering reference data for MCP3422A3-E/MS — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCP3422A1-E/MS | MCP3422A2T-E/MS | MCP3422A5T-E/MS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
Key Differentiators
- Conversion-rate option aligned with low-speed precision acquisition (vs MCP3422A1-E/MS)
- Automotive-grade qualification in a compact footprint (vs MCP3422A5T-E/MS)
- Two-channel differential architecture with an onboard precision reference (vs MCP3422A2T-E/MS)
Design Notes
Route the two differential inputs as a compact, matched pair and connect their returns through a quiet analog ground path. Place input filtering and protection components close to the ADC pins so unwanted differential noise is not collected over long PCB traces. Keep the I2C routing away from switching-node and high-current paths. Use the manufacturer package drawing and pin-description table to confirm all eight MSOP connections and the land pattern before release.
At 3.75 samples per second, the ADC is optimized for slowly changing signals rather than high-bandwidth waveforms. Configure digital filtering to meet the required response time while rejecting noise outside the measurement bandwidth. Differential source impedance should be balanced and kept within the limits for the selected gain and conversion speed. Verify offset, gain, and noise performance across the intended input range before calibrating the system.
Provide a quiet supply at 2.7 V to 5.5 V and decouple it close to the device according to the manufacturer application guidance. The internal 2.048 V reference supports stable ratiometric or fixed-scale measurement, but PCB leakage, temperature drift, and reference noise still affect accuracy. In battery-powered systems, calculate average consumption from the converter's operating duty cycle and account for startup and conversion intervals in the energy budget.
Compliance Information
The manufacturer-related listing identifies MCP3422A3-E/MS as automotive AEC-Q100 qualified. No separate RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.