Microchip Technology

MCP604T-E/ST - 2.8 MHz Quad RRO Op Amp | Microchip

MPN: MCP604T-E/ST ✓ Active
2.7 V Vdss 230 uA Id 14-pin TSSOP Package
MOQ: 1 |

MCP604T-E/ST Overview

The Microchip Technology MCP604T-E/ST is a quad CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and rail-to-rail output swing in a 14-pin TSSOP package. It supports low-voltage operation from 2.7 V, making the device suitable for portable, industrial, instrumentation, and mixed-signal systems powered by a 3.3 V or 5 V rail.

An operational amplifier is an amplifier IC that uses high open-loop gain to amplify the difference between two input voltages. The MCP604 belongs to the CMOS operational-amplifier hierarchy, which combines rail-to-rail output capability, low bias current, low supply current, and moderate bandwidth. These characteristics place it between precision micropower amplifiers and higher-speed signal-chain amplifiers designed for substantially wider bandwidth.

The four amplifiers are optimized for low-power operation while retaining useful signal-chain performance. The 2.8 MHz gain-bandwidth product supports closed-loop operation at frequencies determined by the selected noise gain, while 230 uA typical operating current supports four amplifiers in compact, low-power systems. Rail-to-rail output swing increases usable output range near the supply rails, and the low-bias-current architecture is advantageous when driving high-impedance sensors.

The MCP604 family uses Microchip CMOS technology to provide low input bias current, high open-loop gain, high-speed operation, and rail-to-rail output swing. Its 2.7 V minimum supply permits operation from a single 3.3 V rail. The quad configuration reduces package count compared with four individual single amplifiers, while separate amplifier sections can independently provide voltage gain, buffering, filtering, or differential signal conditioning.

Typical uses include portable sensor interfaces, low-voltage instrumentation, industrial measurement circuits, active filters, and general-purpose analog signal conditioning. The MCP604 is also appropriate for four-channel acquisition systems where each amplifier drives a high-impedance sensor or buffers an ADC input. For designs requiring a faster amplifier, greater output current, or lower operating current, a different device with clearly different electrical ratings should be selected rather than treated as an automatic replacement.

Decouple each supply pin with a local high-frequency ceramic capacitor and provide stable reference or return paths according to the manufacturer's application guidance. Decoupling capacitors should be placed close to the device, and sensitive feedback networks should be routed away from switching nodes. Verify output swing, load capability, stability, and input common-mode behavior against the application before releasing a production design.

This page combines manufacturer specifications, package and lifecycle information, drop-in replacement analysis, comparison parameters, and practical circuit guidance. It is intended to help engineers distinguish the MCP604T-E/ST from temperature-grade, channel-count, bandwidth, and package variants before committing a design to a specific land pattern.

Drop-in alternatives for MCP604T-E/ST — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MCP604T-E/ST (same form factor and footprint) — differing in Gain-Bandwidth Product, Package, Typical Operating Current, Amplifier Type, Process Technology.

Microchip Technology
Gain-Bandwidth Product: 2.8 MHz typical
Package: 14-SOIC, 3.90 mm body width
Amplifier Type: General-purpose CMOS operational amplifier
Microchip Technology
Gain-Bandwidth Product: 2.8 MHz typical
Typical Operating Current: 230 µA per amplifier
Amplifier Type: Quad CMOS operational amplifier
Microchip Technology
Amplifier Type: Quad CMOS operational amplifier
Microchip Technology
Amplifier Type: Quad CMOS operational amplifier
Process Technology: Advanced CMOS

MCP604T-I/ST

✅ Drop-In
Microchip Technology
📦 14-TSSOP
Quad CMOS operational amplifier · 4 channels · 2.8 MHz · 230 uA · 2.7 V · 6 V · Rail-to-rail

Contact for price

View Datasheet →

MCP604-I/ST

✅ Drop-In
Microchip Technology
📦 14-TSSOP
Quad CMOS operational amplifier · 4 channels · 2.8 MHz · 230 uA · 2.7 V to 5.5 V · Rail-to-rail

Contact for price

View Datasheet →

MCP604-E/ST

✅ Drop-In
Microchip Technology
📦 14-TSSOP
Quad CMOS operational amplifier · 4 channels · 2.7 V to 6 V · 2.8 MHz typical · 2.3 V/µs · 230 µA per amplifier · 2 mV · 75 dB minimum

Contact for price

View Datasheet →

MCP604T-E/ST Maximum Ratings & Electrical Characteristics

Amplifier Count 4 amplifiers
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Minimum Single-Supply Voltage 2.7 V
Maximum Single-Supply Voltage 6.0 V
Output Swing Rail-to-rail
Package 14-pin TSSOP
Mounting Type Surface mount
Process Technology CMOS

MCP604T-E/ST Pin Configuration

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 NC — Not connected (per datasheet)
Pin 2 -INA — Inverting input for amplifier A
Pin 3 +INA — Non-inverting input for amplifier A
Pin 4 V- — Negative supply connection
Pin 5 +INB — Non-inverting input for amplifier B
Pin 6 -INB — Inverting input for amplifier B
Pin 7 OUTB — Output for amplifier B
Pin 8 OUTA — Output for amplifier A
Pin 9 +INC — Non-inverting input for amplifier C
Pin 10 -INC — Inverting input for amplifier C
Pin 11 V+ — Positive supply connection
Pin 12 -IND — Inverting input for amplifier D
Pin 13 +IND — Non-inverting input for amplifier D
Pin 14 OUTD — Output for amplifier D

Typical Applications

MCP604T-E/ST is suitable for 6 applications: Portable Sensor Signal Conditioning, Industrial Instrumentation, Precision Active Filters, Low-Power ADC Signal Conditioning, Audio Preamplifier and Buffer, General-Power 5 V Control and Interface.

📱

Portable Sensor Signal Conditioning

The MCP604T-E/ST suits portable sensing systems that require four buffered channels and operate from a 3.3 V battery-derived rail. Its 230 uA typical operating current provides a defined starting point for power-budget analysis, while the 2.8 MHz gain-bandwidth product supports low-frequency gain stages and active filters. Rail-to-rail output swing helps maximize signal range near the available supply voltage. Use one amplifier section for each sensor or conditioning channel, place bypass capacitance close to the supply pins, and verify that source impedance and capacitive loading will not compromise closed-loop stability.

🏭

Industrial Instrumentation

The MCP604T-E/ST can provide input buffering, gain, active filtering, and output driving in compact industrial instrumentation. Its 2.8 MHz gain-bandwidth product is appropriate for signals spanning audio and low-frequency measurement bands, and the quad configuration reduces the number of amplifier packages required. Operation from a single 2.7 V to 6.0 V supply simplifies systems built around 3.3 V or 5 V rails. Keep high-impedance sensor paths short, maintain a quiet ground reference, and verify that the selected temperature grade covers the enclosure's measured operating range.

⚡

Precision Active Filters

The four MCP604T-E/ST amplifier sections can implement multiple Sallen-Key or multiple-feedback active-filter stages in a low-voltage system. A 2.8 MHz gain-bandwidth product gives the closed-loop amplifier useful bandwidth above the frequency ranges commonly used for slow sensor and audio-band filtering. Component tolerances determine much of the filter accuracy, so use suitable resistor and capacitor tolerances and keep the feedback network compact. Validate stability with the actual source and load impedances, especially when the filter drives an ADC or long PCB trace.

🖥️

Low-Power ADC Signal Conditioning

The MCP604T-E/ST is suitable for conditioning up to four low-level analog signals before conversion by an ADC. Its low-bias-current CMOS input architecture supports high-impedance sources, while 2.8 MHz gain-bandwidth product provides more than enough bandwidth for many low-frequency conversion systems. Rail-to-rail output can improve use of the available supply range, although input common-mode and output-swing limits must be checked for the selected gain. Use short traces, dedicated return paths, and anti-alias filtering before the converter input.

🎧

Audio Preamplifier and Buffer

The MCP604T-E/ST can provide four channels of voltage gain, impedance buffering, and simple active filtering in low-voltage audio equipment. Its rail-to-rail output swing is useful when the signal must use most of a 3.3 V or 5 V rail, and the 2.8 MHz gain-bandwidth product covers a wide range of conventional audio-band applications. The amplifier is not a high-current headphone driver, so use a separate output stage when driving low-ohm loads. Confirm distortion, output swing, and stability against the intended feedback gain and load impedance.

🔧

General-Power 5 V Control and Interface

The MCP604T-E/ST fits 5 V control boards that need several general-purpose amplifier channels for level shifting, filtering, comparators, or impedance isolation. Its single-supply range of 2.7 V to 6.0 V and 230 uA typical operating current support compact control electronics, while four sections provide flexible channel allocation. Check input and output behavior near the rails before choosing high gain, because the rail-to-rail output specification does not imply unrestricted input common-mode operation. Decouple the device locally and keep feedback paths away from digital switching returns.

What is the operating voltage range of MCP604T-E/ST?
The MCP604T-E/ST operates from 2.7 V to 6.0 V on a single supply. According to the Microchip MCP604 product documentation, the family supports low-voltage operation beginning at 2.7 V, making it suitable for 3.3 V and 5 V systems. The quad TSSOP implementation provides four amplifiers without requiring four separate packages.
What are the key specifications of MCP604T-E/ST?
The MCP604T-E/ST is a four-amplifier CMOS device with a 2.8 MHz gain-bandwidth product and 230 uA typical operating current. Microchip identifies rail-to-rail output swing, low bias current, high open-loop gain, and operation from a single supply as principal family characteristics. The device is supplied in a 14-pin TSSOP package for surface-mount assembly.
Is MCP604T-E/ST rail-to-rail?
The MCP604T-E/ST provides rail-to-rail output swing according to the Microchip MCP604 family documentation. This output characteristic allows the amplifier to approach the supply rails more closely than a conventional fixed-output-range amplifier. Input common-mode limits should still be checked against the manufacturer specifications when operating near the positive rail.
Where can I download the MCP604T-E/ST datasheet PDF?
The official MCP604T-E/ST technical information is available from the Microchip MCP604 product page and the manufacturer datasheet linked from that page. The device belongs to the MCP601, MCP602, MCP603, and MCP604 low-power operational-amplifier family. Use the pin-description and typical-application sections when assigning the 14 TSSOP connections.
Where is the MCP604T-E/ST pinout?
The MCP604T-E/ST pinout is defined in the pin-description table of the Microchip MCP604 manufacturer datasheet. Its 14-pin TSSOP arrangement contains four complete amplifier sections, supply connections, and an unconnected pin. Use the package drawing together with the datasheet table when assigning PCB tracks.
Where can I buy MCP604T-E/ST online?
The MCP604T-E/ST can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit availability, quantity requirements, delivery timing, and shipment options. Its order code identifies the 14-pin TSSOP package, and the manufacturer product page remains the authoritative source for lifecycle information.
What is the price of MCP604T-E/ST?
Current pricing for the MCP604T-E/ST should be obtained through the Request a Quote form on this page. Quote-based purchasing allows the order quantity, package code, delivery schedule, and current market conditions to be considered together. The quantity-break area on this page updates independently of the technical product description.
What is the lead time for MCP604T-E/ST?
The current lead time for MCP604T-E/ST depends on the requested quantity and market availability. Submit the required quantity and target delivery date through the Request a Quote form on this page. Confirm that the quotation retains the exact MCP604T-E/ST order code, because related MCP604 package and temperature-grade variants are not interchangeable.
Is MCP604T-E/ST in stock?
Current MCP604T-E/ST stock status should be confirmed through the Request a Quote form on this page. The form can reflect the requested quantity and any scheduled delivery information. Do not treat a manufacturer family page or a listing for a related package variant as confirmation of stock for this exact order code.
MCP604T-E/ST vs MCP604T-I/ST: which is better?
Choose MCP604T-E/ST for an E-grade temperature requirement and MCP604T-I/ST when the higher industrial temperature grade is required. Both are members of the same 14-pin TSSOP MCP604 family, but their operating-temperature options differ. Microchip documents a 2.8 MHz gain-bandwidth product and 230 uA typical operating current for the family, so the temperature qualification is the principal selection consideration.
MCP604T-E/ST vs MCP6024T-E/ST: which is better for signal conditioning?
The MCP604T-E/ST is better when 2.8 MHz gain-bandwidth product and four amplifier channels are important, while the MCP6024T-E/ST is a different low-power family with lower bandwidth. Microchip rates the MCP604 family at 2.8 MHz and 230 uA typical operating current. Confirm input bias current, output drive, noise, and temperature ratings before treating either device as interchangeable.
When should I choose MCP604T-E/ST over another quad op amp?
Choose MCP604T-E/ST when a design needs four rail-to-rail-output CMOS amplifiers, a 2.8 MHz gain-bandwidth product, and operation from a supply as low as 2.7 V. It is appropriate for general-purpose low-voltage signal conditioning, buffering, and active filtering. Select a different amplifier when the application requires substantially greater bandwidth, lower supply current, lower offset, or greater output-current capability.
Is MCP604T-E/ST suitable for battery-powered instrumentation?
The MCP604T-E/ST is suitable for many 3.3 V battery-powered instrumentation circuits because its supply range begins at 2.7 V and its typical operating current is 230 uA for the quad device. Its rail-to-rail output swing and low bias current support sensor buffering and low-level signal conditioning. Battery life should still be evaluated using the actual load, duty cycle, and quiescent-current contribution of the complete circuit.
What is the best drop-in replacement for MCP604T-E/ST?
The MCP604T-I/ST is the closest same-family drop-in candidate because it retains the MCP604 quad topology, 14-pin TSSOP package, 2.8 MHz gain-bandwidth product, and 230 uA typical operating current. Its temperature-grade designation differs from the E-grade target. Confirm that the higher temperature range is acceptable and review every pin definition in the manufacturer datasheet before substitution.
Can MCP604T-I/ST replace MCP604T-E/ST?
MCP604T-I/ST can replace MCP604T-E/ST when its temperature range and operating requirements are acceptable. The two parts belong to the same quad MCP604 family and use the 14-pin TSSOP package, with a documented gain-bandwidth product of 2.8 MHz and typical operating current of 230 uA. Verify the manufacturer pin table, temperature limits, and production requirements before approving the change.
What is the best Microchip equivalent for MCP604T-E/ST?
MCP604T-I/ST is the closest Microchip drop-in alternative for MCP604T-E/ST because the package, four-channel topology, bandwidth, and typical operating current align with the MCP604 family. It offers a different temperature-grade option rather than a different amplifier architecture. The exact E/ST, I/ST, and manufacturer ordering codes should be checked before placing a production order.
How should MCP604T-E/ST be decoupled and laid out?
Place a high-frequency ceramic bypass capacitor immediately beside the MCP604T-E/ST supply pins and connect return currents through a low-impedance ground path. Keep high-impedance input, feedback, and reference tracks short and away from switching nodes. Stable feedback-network layout is essential because excessive parasitic capacitance can alter closed-loop behavior at higher operating frequencies.

Engineering reference data for MCP604T-E/ST — comparison, design guidance, and compliance information.

Selection Guide

Choose MCP604T-E/ST when the design requires four low-power CMOS amplifiers, operation from 2.7 V to 6.0 V, rail-to-rail output swing, and a 2.8 MHz gain-bandwidth product in a 14-pin TSSOP package. Choose MCP604T-I/ST when the circuit must support a higher temperature range but otherwise retains the same family architecture and footprint. MCP604-I/ST may be suitable when its ordering-code temperature specification meets the production requirement, while MCP604-E/ST should be selected only after checking the distinction in temperature qualification and ordering terms. Do not choose the MCP6024 family solely for an apparent pin match: its lower gain-bandwidth product makes it better suited to slower, micropower signal-conditioning tasks. For designs requiring substantially lower supply current, greater output current, lower offset voltage, or higher bandwidth, select a dedicated amplifier instead of forcing an MCP604-family substitution.

Comparison with Alternatives

Parameter This Product MCP604T-I/ST MCP604-I/ST MCP604-E/ST
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-TSSOP 14-TSSOP - same 14-TSSOP - same 14-TSSOP - same
Amplifier Count 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz
Typical Operating Current 230 uA 230 uA 230 uA 230 uA
Minimum Supply Voltage 2.7 V 2.7 V 2.7 V 2.7 V
Maximum Supply Voltage 6.0 V 6.0 V 6.0 V 6.0 V
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Special Features Low bias current, rail-to-rail output Low bias current, rail-to-rail output Low bias current, rail-to-rail output Low bias current, rail-to-rail output

Key Differentiators

  • Quad amplifier integration (vs MCP6024T-E/ST)
  • Exact MCP604-family footprint and topology (vs MCP604T-I/ST)
  • Low-voltage rail-to-rail output capability (vs MCP604-E/ST)

Design Notes

Place the supply bypass capacitor directly between the V+ and V- pins and the ground plane rather than routing the supply through a long loop. A short, low-impedance return path reduces the effective series inductance and helps the amplifier respond cleanly to fast input and output transitions. Keep the TSSOP footprint, exposed pad status, solder-mask definition, and paste pattern consistent with the manufacturer land-pattern guidance.

Route high-impedance inputs, noninverting inputs, and feedback components as short and compact as practical. Parasitic capacitance across a high-value feedback resistor can reduce phase margin, particularly when the amplifier operates near the 2.8 MHz gain-bandwidth-product region. For sensor interfaces, maintain a quiet ground reference and avoid placing analog input traces beside clocks, pulse-width-modulator outputs, or switching-regulator power paths.

Begin the power-budget calculation with the documented 230 uA typical operating-current figure and add the load current from every amplifier channel. Because the MCP604T-E/ST supports a single supply, check whether the negative supply pin is connected to ground in the intended topology. Confirm actual quiescent current and output-current behavior in the final circuit rather than assuming the typical value applies across all operating conditions.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status was not stated in the cited manufacturer or distributor records. The device is an operational amplifier rather than an automotive-qualified product, so AEC-Q100 is not applicable unless Microchip identifies a specific automotive order code.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

MCP604T-E/ST datasheet MCP604T-E/ST pinout MCP604T-E/ST datasheet pdf MCP604T-E/ST equivalent MCP604T-E/ST replacement MCP604T-E/ST drop-in replacement MCP604T-E/ST vs MCP604T-I/ST MCP604T-E/ST 14-TSSOP footprint MCP604T-E/ST 2.8 MHz op amp MCP604T-E/ST 2.7V 230uA MCP604T-E/ST price MCP604T-E/ST stock Microchip MCP604T-E/ST MCP604T-E/ST sensor signal conditioning What is MCP604T-E/ST?

Related Components & Terms

Microchip Technology MCP604T-E/ST MCP604T-I/ST MCP604-I/ST MCP604-E/ST MCP6024T-E/ST Operational amplifier CMOS operational amplifier Quad amplifier Low-dropout circuit Rail-to-rail output Gain-bandwidth product 2.8 MHz 230 uA 2.7 V to 6.0 V 14-pin TSSOP TSSOP package family Surface-mount technology SMD package Low bias current Open-loop gain Sensor signal conditioning Active filter ADC interface Industrial instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details