Microchip Technology

MCP6007-E/MS - Dual 1MHz R-R Op Amp | Microchip

MPN: MCP6007-E/MS ✓ Active
1.8 V Vdss 70 µA per amplifier Id 8-MSOP Package
MOQ: 1 |

MCP6007-E/MS Overview

The Microchip Technology MCP6007-E/MS is a dual general-purpose operational amplifier with a typical gain-bandwidth product of 1 MHz, rail-to-rail input and output operation, and an 8-MSOP package. It supports single-supply operation from 1.8 V to 5.5 V and consumes no more than 70 µA per amplifier. The MCP6007-E/MS is unity-gain stable and includes EMI filtering for applications where sensitive analog signals must remain usable near digital circuitry.

An operational amplifier is an analog signal-processing IC that uses high-gain differential amplification to compare two input voltages. The MCP6007 family belongs to the operational-amplifier hierarchy within analog and linear semiconductors, where rail-to-rail input and output capability lets the amplifier operate across most or all of the supply voltage. The dual configuration provides two amplifiers in one package, reducing component count in filter, buffer, instrumentation, and sensor-conditioning circuits.

The two amplifiers provide a typical 1 MHz gain-bandwidth product, low input bias current, and rail-to-rail input and output behavior. Maximum input offset voltage is ±1.6 mV per amplifier, while maximum quiescent current is 70 µA per amplifier. These characteristics make the device suitable for low-power battery instrumentation, portable measurement systems, sensor interfaces, and general analog signal-conditioning applications operating near the lower end of its supply range.

The MCP6007-E/MS is unity-gain stable, allowing direct use as a voltage follower without imposing a minimum closed-loop gain. Its low-frequency bandwidth favors precision measurement, filtering, buffering, and amplification rather than wideband signal processing. EMI filtering improves behavior in systems containing switching nodes or fast digital transitions, although layout, bypassing, and source-impedance considerations remain necessary for predictable low-noise performance.

Typical uses include battery-powered sensor conditioning, buffered transducer inputs, active low-pass filters, low-voltage analog signal chains, general-purpose dual filters, and portable test equipment. The dual package works well when two related channels are required, such as differential sensing or paired filtering stages, because both amplifiers share the same package and supply architecture.

For stable operation, place input and output bypass capacitors close to their respective pins, keep sensitive input traces away from switching-current paths, and confirm that the selected gain, output load, and common-mode input range suit the intended supply voltage. The MSOP package also requires careful thermal and solder-joint inspection where repeated temperature cycling or mechanical stress is expected.

This page organizes the manufacturer's principal operating specifications, sourcing details, application guidance, and verified drop-in comparison information. The engineering sections also highlight package, supply-voltage, offset, bandwidth, and quiescent-current considerations that must be checked together before the amplifier is approved for a new analog design.

Drop-in alternatives for MCP6007-E/MS — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

MCP6007-E/MS Maximum Ratings & Electrical Characteristics

Amplifier Count 2 amplifiers
Product Type General-purpose operational amplifier
Typical Gain-Bandwidth Product 1 MHz
Minimum Single-Supply Operating Voltage 1.8 V
Maximum Supply Voltage 5.5 V
Maximum Input Offset Voltage ±1.6 mV
Maximum Quiescent Current 70 µA per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
EMI Filtering Included
Operating Temperature Grade E temperature grade
Package 8-MSOP
Mounting Type Surface mount
Shipping Package Tube
Full-Tube Quantity 800 units

MCP6007-E/MS tube Pin Configuration Guide

Pin configuration for MCP6007-E/MS (tube package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

tube package pinout diagram for MCP6007-E/MS

No detailed pinout data available for MCP6007-E/MS.

Refer to the datasheet for full pin configuration.

Typical Applications

MCP6007-E/MS is suitable for 6 applications: Battery-Powered Sensor Conditioning, Portable Instrumentation, Active Low-Pass Filters, Transducer Interface Buffering, Industrial Control Signal Conditioning, General-Purpose Dual Buffer.

🔋

Battery-Powered Sensor Conditioning

The MCP6007-E/MS fits battery-powered sensor conditioning because its 1.8 V minimum single-supply operation reduces the voltage required by low-energy measurement systems. Each amplifier draws no more than 70 µA, while rail-to-rail input and output operation helps preserve sensor signal range near the supply limits. The two channels can condition complementary or sequential sensor signals, buffer high-impedance sources, or implement paired active-filter stages. Its 1 MHz typical gain-bandwidth product is suitable for moderate-bandwidth measurements, while the ±1.6 mV maximum offset should be included in the accuracy budget.

🖥️

Portable Instrumentation

The MCP6007-E/MS is useful in portable instrumentation where two analog channels must be amplified within a compact, low-power design. A typical 1 MHz gain-bandwidth product supports low-frequency measurement signals, and unity-gain stability allows each channel to perform buffering or noninverting amplification without a minimum-gain penalty. Rail-to-rail input and output operation improves utilization of the available 1.8 V to 5.5 V supply range. Designers should still account for the ±1.6 mV maximum offset, input-bias-current error, and the output-current capability required by the sensor and conversion chain.

🎧

Active Low-Pass Filters

The MCP6007-E/MS can implement a pair of active low-pass filters because it contains two unity-gain-stable amplifiers in one 8-MSOP package. Its typical 1 MHz gain-bandwidth product is appropriate for filtering sensor, audio, or control signals in the lower-frequency region rather than high-speed communications. Rail-to-rail output operation can improve usable signal range in a 5 V system, while the 70 µA maximum quiescent current per amplifier supports portable designs. Component tolerances, op-amp noise, stability margin, and loading must be evaluated against the desired cutoff frequency and attenuation shape.

🧩

Transducer Interface Buffering

The MCP6007-E/MS is appropriate for buffering resistive, capacitive, or high-impedance transducers when low bias current and rail-to-rail input behavior are important. The manufacturer describes the family as having low input bias current, and the device can operate from 1.8 V, reducing the burden on compact sensor modules. One channel can buffer the transducer while the other handles gain or filtering. Because the exact typical bias current is not stated on the product page, precision and high-source-impedance designs should use the family datasheet values before selecting resistor values.

🏭

Industrial Control Signal Conditioning

The MCP6007-E/MS can condition low-level analog control signals in compact industrial equipment where a 1.8 V to 5.5 V supply is available. Its two-channel 8-MSOP package supports independent amplification, filtering, or buffering functions without requiring two separate packages. The 1 MHz typical gain-bandwidth product is suitable for common process-control and interface signals rather than high-bandwidth servo loops. Designers should verify common-mode range, output swing, noise, and offset in the operating region, and place bypass capacitors close to the device to maintain predictable performance near switching circuitry.

🔧

General-Purpose Dual Buffer

The MCP6007-E/MS works as a general-purpose dual buffer when two independent analog signals need isolation from loading or level adjustment. Both amplifiers are unity-gain stable, rail-to-rail at the input and output, and optimized for a modest 1 MHz bandwidth rather than high-speed signal transmission. The dual MSOP arrangement reduces board area, while maximum quiescent current of 70 µA per amplifier supports low-power operation. Output loading, capacitive stability, input impedance, and the amount of signal attenuation through the selected gain network remain important checks in the final circuit.

Recommended Products Summary

MCP6007-E/MS Microchip Technology Used in: Battery-Powered Sensor Conditioning, Portable Instrumentation, Active Low-Pass Filters, Transducer Interface Buffering, Industrial Control Signal Conditioning, General-Purpose Dual Buffer MCP6007T-E/MS Tape-and-reel production variant Used in: Battery-Powered Sensor Conditioning, Portable Instrumentation, Active Low-Pass Filters, Transducer Interface Buffering, Industrial Control Signal Conditioning, General-Purpose Dual Buffer
What are the key specifications of MCP6007-E/MS that engineers should know?
The MCP6007-E/MS is a dual, general-purpose operational amplifier with a typical 1 MHz gain-bandwidth product, rail-to-rail input and output operation, and operation from a single supply as low as 1.8 V. According to the Microchip Technology MCP6006/6R/6U/7/9 family datasheet, each amplifier draws no more than 70 µA and has a maximum input offset voltage of ±1.6 mV. The device is unity-gain stable, includes EMI filtering, and is packaged as an 8-MSOP.
What is the operating voltage range of MCP6007-E/MS?
The MCP6007-E/MS operates from 1.8 V to 5.5 V as a single-supply amplifier. The 1.8 V minimum comes from the Microchip Technology MCP6006/6R/6U/7/9 family datasheet, while the 5.5 V maximum supply rating is identified for the MCP6007-E/MS by the manufacturer product listing. This range makes the amplifier appropriate for low-voltage battery-powered systems, portable instrumentation, and low-voltage analog control circuits.
Is MCP6007-E/MS suitable for battery-powered sensor applications?
Yes, the MCP6007-E/MS is suitable for battery-powered sensor applications because each amplifier has a maximum quiescent current of 70 µA and the device accepts supplies as low as 1.8 V. According to the Microchip Technology family datasheet, it also provides rail-to-rail input and output operation and unity-gain stability. These characteristics allow sensor signals to be buffered or conditioned without requiring a high-voltage rail, although total current should also include external divider and filtering loads.
Where can I download the MCP6007-E/MS datasheet PDF?
The MCP6007-E/MS datasheet PDF can be downloaded from the official Microchip Technology document for the MCP6006/6R/6U/7/9 family. That manufacturer document covers the MCP6007 variant and provides its supply, accuracy, current, stability, and package information. The document identifier shown for the family is 20006411B. Use that datasheet for the official pin descriptions, test conditions, and characteristic curves.
Where can I find the MCP6007-E/MS pinout?
The MCP6007-E/MS pinout is shown in the pin-description section of the official Microchip Technology MCP6006/6R/6U/7/9 family datasheet, document 20006411B. The device is an 8-MSOP containing two rail-to-rail operational amplifiers, with supply, ground, input, and output connections shared by the appropriate channels. Use the pin-description table and package drawing together when assigning PCB tracks.
What is the gain-bandwidth product of MCP6007-E/MS?
The MCP6007-E/MS has a typical gain-bandwidth product of 1 MHz. According to the Microchip Technology MCP6006/6R/6U/7/9 family datasheet, this bandwidth applies to the MCP6007 series and is adequate for general-purpose amplification, filtering, and buffering. It is not intended for high-speed video, RF, or wideband instrumentation stages, so expected closed-loop bandwidth and stability should be evaluated for the selected feedback network.
Can MCP6007-E/MS be used as a unity-gain voltage follower?
Yes, the MCP6007-E/MS is unity-gain stable and can be configured as a voltage follower. According to the Microchip Technology MCP6006/6R/6U/7/9 family datasheet, the family is unity-gain stable while supporting rail-to-rail input and output operation. Follower use is useful for buffering high-impedance sensors or isolating an analog source from a downstream filter, with output swing and capacitive-load behavior still requiring normal operating-range checks.
What is the input offset voltage of MCP6007-E/MS?
The maximum input offset voltage of the MCP6007-E/MS is ±1.6 mV per amplifier. This figure appears in the Microchip Technology MCP6006/6R/6U/7/9 family datasheet. Offset contributes directly to output error when the amplifier provides gain, so precision designs should also account for input-bias-current effects, resistor tolerances, noise, and the gain applied to the input signal.
Where to buy MCP6007-E/MS online?
The MCP6007-E/MS can be requested through the Request a Quote form on this page for the exact tube-packaged MPN. The manufacturer product page identifies MCP6007-E/MS as an 8-MSOP dual operational amplifier, and a manufacturer-direct listing also identifies the exact MPN as available in full and partial tubes. Submit your required quantity and target delivery date through the quote form so the order can be matched to the correct packaging suffix.
What is the price of MCP6007-E/MS?
The current commercial price for MCP6007-E/MS should be confirmed through the Request a Quote form on this page. The form applies to the exact tube-packaged MCP6007-E/MS rather than a tape-and-reel order code or a different package suffix. Submit the required quantity and shipment destination to obtain a current quotation and lead-time confirmation without confusing the exact MPN with MCP6007T-E/MS.
What is the lead time for MCP6007-E/MS?
The lead time for MCP6007-E/MS should be confirmed through the Request a Quote form on this page using the exact tube-packaged MPN and required quantity. The manufacturer-direct listing identifies partial-tube and full-tube quantities, but the current allocation and shipment schedule may change. The quote form is the appropriate route for validating current lead time, stock, and packaging requirements together.
Is MCP6007-E/MS in stock?
The MCP6007-E/MS stock position should be checked through the Request a Quote form on this page. The manufacturer-direct product listing identifies inventory in partial tubes and full tubes, with a full tube containing 800 units, but availability can change with order volume and replenishment timing. Request the exact quantity through the quote form to confirm current allocation and delivery scheduling.
What can replace MCP6007-E/MS?
A valid drop-in replacement for MCP6007-E/MS must use the same 8-MSOP footprint, preserve both channels’ pin assignments, and meet the 1.8 V to 5.5 V supply, 1 MHz bandwidth, rail-to-rail operation, and current requirements. MCP6007T-E/MS is a tape-and-reel order variant of the same device, but it is not an engineering drop-in alternative because the shipping format differs. No other pin-compatible replacement is established here without a verified manufacturer comparison.
MCP6007-E/MS vs MCP6007T-E/MS: which version should I choose?
Choose MCP6007-E/MS for tube delivery and MCP6007T-E/MS for tape-and-reel production handling. Their core device description is the same: a dual, general-purpose, rail-to-rail 1 MHz operational amplifier in an 8-MSOP package. The important difference is the final order-code suffix and resulting shipping format, not a change in electrical function, so the PCB footprint remains the same while handling requirements determine the appropriate version.
When should I choose MCP6007-E/MS instead of another dual op amp?
Choose MCP6007-E/MS when a design needs two unity-gain-stable amplifiers with rail-to-rail input and output, a typical 1 MHz gain-bandwidth product, and operation from 1.8 V to 5.5 V. It is particularly suitable for low-power sensor conditioning, buffering, and dual active-filter stages. Select another amplifier only when its bandwidth, offset, noise, supply range, load capability, or package pinout provides a documented advantage that this device cannot satisfy.

Engineering reference data for MCP6007-E/MS — comparison, design guidance, and compliance information.

Selection Guide

Choose MCP6007-E/MS for a low-voltage dual-amplifier design that requires rail-to-rail input and output, unity-gain stability, a typical 1 MHz gain-bandwidth product, and operation down to 1.8 V. The dual 8-MSOP arrangement is especially useful for paired sensor channels, buffers, and active filters where component count and board area matter. MCP6007T-E/MS provides the same electrical device in a tape-and-reel format for automated assembly, but its suffix makes it an order-code variant rather than a distinct drop-in engineering alternative. If a replacement is needed, it must preserve the 8-MSOP footprint, pin assignments, supply range, input/output behavior, current draw, and approximately 1 MHz bandwidth. A cross-brand substitute should not be selected solely because it is a dual 1 MHz amplifier; its offset, bias current, quiescent current, common-mode behavior, and stability characteristics must also meet the design requirements.

Design Notes

Place the input bypass capacitor, output bypass capacitor, and any configured feedback components close to their associated MCP6007-E/MS pins. Keep the two channels physically separate when one carries a sensitive signal and the other handles a larger transient. Use a continuous ground reference beneath the 8-MSOP where board density permits, and route high-current or switching-node paths away from the input pins to minimize coupling into the amplifier.

Evaluate the entire analog rail rather than only the MCP6007-E/MS quiescent current. Each amplifier draws no more than 70 µA, but sensor bias currents, divider networks, ADC inputs, and external load current can dominate the power budget. Also confirm that the 1.8 V to 5.5 V supply range provides adequate output swing and common-mode range for the signals being amplified. Estimated: at a 3.3 V supply, the amplifier-only worst-case quiescent draw is 140 µA.

Do not interpret rail-to-rail operation as unlimited input or output range under every load condition. Check the datasheet limits for the selected supply, output load, and temperature, and include the ±1.6 mV maximum input offset in the accuracy calculation. Because the device is intended primarily for low-frequency general-purpose operation, avoid assuming that its 1 MHz gain-bandwidth product can deliver high closed-loop bandwidth at every gain setting without additional stability analysis.

The 8-MSOP package is small, but the MCP6007-E/MS normally consumes little power because its maximum quiescent current is 70 µA per amplifier. Thermal risk is more likely to arise from output-current demand or nearby heat sources than from quiescent operation alone. Verify maximum output current for the selected load, maintain solder-joint integrity in the MSOP package, and inspect exposed-pad or lead-frame orientation during rework because pin 1 and orientation errors can damage a dual amplifier.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact MCP6007-E/MS order code. The E suffix denotes the E temperature-grade ordering option, not an automotive qualification.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

MCP6007-E/MS datasheet MCP6007-E/MS pinout MCP6007-E/MS datasheet pdf MCP6007-E/MS equivalent MCP6007-E/MS replacement MCP6007-E/MS cross reference MCP6007-E/MS footprint MCP6007-E/MS application circuit MCP6007-E/MS price MCP6007-E/MS stock Microchip MCP6007-E/MS MCP6007-E/MS vs MCP6007T-E/MS 1 MHz dual rail-to-rail op amp 8-MSOP dual op amp pinout

Related Components & Terms

Microchip Technology MCP6007-E/MS MCP6007T-E/MS MCP6007 MCP6006/6R/6U/7/9 family operational amplifier dual operational amplifier general-purpose amplifier analog IC linear semiconductor rail-to-rail input rail-to-rail output gain-bandwidth product unity-gain stable EMI filtering input offset voltage input bias current quiescent current single-supply operation 8-MSOP surface-mount package sensor conditioning active low-pass filter portable instrumentation RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details