MCP6007-E/MS - Dual 1MHz R-R Op Amp | Microchip
MPN: MCP6007-E/MS ✓ פעילMCP6007-E/MS סקירה
An operational amplifier is an analog signal-processing IC that uses high-gain differential amplification to compare two input voltages. The MCP6007 family belongs to the operational-amplifier hierarchy within analog and linear semiconductors, where rail-to-rail input and output capability lets the amplifier operate across most or all of the supply voltage. The dual configuration provides two amplifiers in one package, reducing component count in filter, buffer, instrumentation, and sensor-conditioning circuits.
The two amplifiers provide a typical 1 MHz gain-bandwidth product, low input bias current, and rail-to-rail input and output behavior. Maximum input offset voltage is ±1.6 mV per amplifier, while maximum quiescent current is 70 µA per amplifier. These characteristics make the device suitable for low-power battery instrumentation, portable measurement systems, sensor interfaces, and general analog signal-conditioning applications operating near the lower end of its supply range.
The MCP6007-E/MS is unity-gain stable, allowing direct use as a voltage follower without imposing a minimum closed-loop gain. Its low-frequency bandwidth favors precision measurement, filtering, buffering, and amplification rather than wideband signal processing. EMI filtering improves behavior in systems containing switching nodes or fast digital transitions, although layout, bypassing, and source-impedance considerations remain necessary for predictable low-noise performance.
Typical uses include battery-powered sensor conditioning, buffered transducer inputs, active low-pass filters, low-voltage analog signal chains, general-purpose dual filters, and portable test equipment. The dual package works well when two related channels are required, such as differential sensing or paired filtering stages, because both amplifiers share the same package and supply architecture.
For stable operation, place input and output bypass capacitors close to their respective pins, keep sensitive input traces away from switching-current paths, and confirm that the selected gain, output load, and common-mode input range suit the intended supply voltage. The MSOP package also requires careful thermal and solder-joint inspection where repeated temperature cycling or mechanical stress is expected.
This page organizes the manufacturer's principal operating specifications, sourcing details, application guidance, and verified drop-in comparison information. The engineering sections also highlight package, supply-voltage, offset, bandwidth, and quiescent-current considerations that must be checked together before the amplifier is approved for a new analog design.
חלופות תחליף ישיר עבור MCP6007-E/MS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMCP6007-E/MS דירוגים מרביים ומאפיינים חשמליים
| Amplifier Count | 2 amplifiers |
| Product Type | General-purpose operational amplifier |
| Typical Gain-Bandwidth Product | 1 MHz |
| Minimum Single-Supply Operating Voltage | 1.8 V |
| Maximum Supply Voltage | 5.5 V |
| Maximum Input Offset Voltage | ±1.6 mV |
| Maximum Quiescent Current | 70 µA per amplifier |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| EMI Filtering | Included |
| Operating Temperature Grade | E temperature grade |
| מארז | 8-MSOP |
| סוג הרכבה | Surface mount |
| Shipping Package | Tube |
| Full-Tube Quantity | 800 units |
מדריך תצורת פינים של MCP6007-E/MS tube
תצורת פינים עבור MCP6007-E/MS (מארזת tube). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור MCP6007-E/MS.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MCP6007-E/MS מתאים עבור 6 יישוםs: Battery-Powered Sensor Conditioning, Portable Instrumentation, Active Low-Pass Filters, Transducer Interface Buffering, Industrial Control Signal Conditioning, General-Purpose Dual Buffer.
Battery-Powered Sensor Conditioning
The MCP6007-E/MS fits battery-powered sensor conditioning because its 1.8 V minimum single-supply operation reduces the voltage required by low-energy measurement systems. Each amplifier draws no more than 70 µA, while rail-to-rail input and output operation helps preserve sensor signal range near the supply limits. The two channels can condition complementary or sequential sensor signals, buffer high-impedance sources, or implement paired active-filter stages. Its 1 MHz typical gain-bandwidth product is suitable for moderate-bandwidth measurements, while the ±1.6 mV maximum offset should be included in the accuracy budget.
מומלץ
Portable Instrumentation
The MCP6007-E/MS is useful in portable instrumentation where two analog channels must be amplified within a compact, low-power design. A typical 1 MHz gain-bandwidth product supports low-frequency measurement signals, and unity-gain stability allows each channel to perform buffering or noninverting amplification without a minimum-gain penalty. Rail-to-rail input and output operation improves utilization of the available 1.8 V to 5.5 V supply range. Designers should still account for the ±1.6 mV maximum offset, input-bias-current error, and the output-current capability required by the sensor and conversion chain.
מומלץ
Active Low-Pass Filters
The MCP6007-E/MS can implement a pair of active low-pass filters because it contains two unity-gain-stable amplifiers in one 8-MSOP package. Its typical 1 MHz gain-bandwidth product is appropriate for filtering sensor, audio, or control signals in the lower-frequency region rather than high-speed communications. Rail-to-rail output operation can improve usable signal range in a 5 V system, while the 70 µA maximum quiescent current per amplifier supports portable designs. Component tolerances, op-amp noise, stability margin, and loading must be evaluated against the desired cutoff frequency and attenuation shape.
מומלץ
Transducer Interface Buffering
The MCP6007-E/MS is appropriate for buffering resistive, capacitive, or high-impedance transducers when low bias current and rail-to-rail input behavior are important. The manufacturer describes the family as having low input bias current, and the device can operate from 1.8 V, reducing the burden on compact sensor modules. One channel can buffer the transducer while the other handles gain or filtering. Because the exact typical bias current is not stated on the product page, precision and high-source-impedance designs should use the family datasheet values before selecting resistor values.
מומלץ
Industrial Control Signal Conditioning
The MCP6007-E/MS can condition low-level analog control signals in compact industrial equipment where a 1.8 V to 5.5 V supply is available. Its two-channel 8-MSOP package supports independent amplification, filtering, or buffering functions without requiring two separate packages. The 1 MHz typical gain-bandwidth product is suitable for common process-control and interface signals rather than high-bandwidth servo loops. Designers should verify common-mode range, output swing, noise, and offset in the operating region, and place bypass capacitors close to the device to maintain predictable performance near switching circuitry.
מומלץ
General-Purpose Dual Buffer
The MCP6007-E/MS works as a general-purpose dual buffer when two independent analog signals need isolation from loading or level adjustment. Both amplifiers are unity-gain stable, rail-to-rail at the input and output, and optimized for a modest 1 MHz bandwidth rather than high-speed signal transmission. The dual MSOP arrangement reduces board area, while maximum quiescent current of 70 µA per amplifier supports low-power operation. Output loading, capacitive stability, input impedance, and the amount of signal attenuation through the selected gain network remain important checks in the final circuit.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCP6007-E/MS — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
הערות תכנון
Place the input bypass capacitor, output bypass capacitor, and any configured feedback components close to their associated MCP6007-E/MS pins. Keep the two channels physically separate when one carries a sensitive signal and the other handles a larger transient. Use a continuous ground reference beneath the 8-MSOP where board density permits, and route high-current or switching-node paths away from the input pins to minimize coupling into the amplifier.
Evaluate the entire analog rail rather than only the MCP6007-E/MS quiescent current. Each amplifier draws no more than 70 µA, but sensor bias currents, divider networks, ADC inputs, and external load current can dominate the power budget. Also confirm that the 1.8 V to 5.5 V supply range provides adequate output swing and common-mode range for the signals being amplified. Estimated: at a 3.3 V supply, the amplifier-only worst-case quiescent draw is 140 µA.
Do not interpret rail-to-rail operation as unlimited input or output range under every load condition. Check the datasheet limits for the selected supply, output load, and temperature, and include the ±1.6 mV maximum input offset in the accuracy calculation. Because the device is intended primarily for low-frequency general-purpose operation, avoid assuming that its 1 MHz gain-bandwidth product can deliver high closed-loop bandwidth at every gain setting without additional stability analysis.
The 8-MSOP package is small, but the MCP6007-E/MS normally consumes little power because its maximum quiescent current is 70 µA per amplifier. Thermal risk is more likely to arise from output-current demand or nearby heat sources than from quiescent operation alone. Verify maximum output current for the selected load, maintain solder-joint integrity in the MSOP package, and inspect exposed-pad or lead-frame orientation during rework because pin 1 and orientation errors can damage a dual amplifier.
מידע על תאימות
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact MCP6007-E/MS order code. The E suffix denotes the E temperature-grade ordering option, not an automotive qualification.