NXP Semiconductors

MKE04Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP

MPN: MKE04Z64VLH4 ✓ Active
3.3 V or 5 V Vdss 64-LQFP, 10 x 10 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKE04Z64VLH4 Overview

The NXP Semiconductors MKE04Z64VLH4 is a 32-bit Kinetis KE04 microcontroller built around a 48 MHz Arm Cortex-M0+ processor, with 64 KB of flash memory and a 64-LQFP 10 x 10 mm package. It operates from a 3.3 V or 5 V supply and targets cost-sensitive industrial equipment requiring enhanced ESD and EMC performance in electrically noisy environments.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The Kinetis KE04 belongs to the Kinetis E series and combines an Arm Cortex-M0+ processor with embedded flash, SRAM, GPIO, timers, serial interfaces, and analog peripherals. This combination provides a compact platform for motor control, appliance control, industrial interfaces, and embedded measurement systems.

The principal specifications include a 48 MHz maximum CPU frequency, 64 KB of programmable flash, an operating supply identified as 3.3 V or 5 V, and a 64-pin LQFP package. The KE04 family also emphasizes enhanced ESD and EMC behavior for cost-sensitive, high-reliability applications. NXP identifies the MKE04Z64VLH4 as an active part, supporting lifecycle planning for new and existing industrial designs.

The Arm Cortex-M0+ architecture uses a compact instruction set optimized for embedded control while retaining the software ecosystem associated with Arm processors. The 64 KB flash region provides room for application code, configuration data, and boot logic. Peripheral integration reduces the number of discrete devices required for sensing, timing, communications, and general-purpose I/O, helping simplify board layouts in space-constrained equipment.

Typical uses include industrial control panels, motor-control subsystems, appliance controllers, building equipment, sensor-hub boards, and compact consumer products. The 10 x 10 mm LQFP package is easy to inspect and assemble, while the Cortex-M0+ platform supports event-driven firmware for responsive control without requiring a high-power processor.

Design the PCB with the manufacturer pin-assignment table as the controlling reference for GPIO multiplexing and alternate functions. Confirm the exact SRAM configuration, peripheral set, operating-temperature limits, clock tolerances, and decoupling requirements in the manufacturer datasheet before schematic release. The tray packaging designation should be checked against the assembly process and incoming-inventory plan.

This product page combines the manufacturer device information with practical procurement, application, and design guidance. It also distinguishes the exact MKE04Z64VLH4 order code from documented related variants and clearly identifies the electrical details that still require confirmation from the full manufacturer datasheet.

Drop-in alternatives for MKE04Z64VLH4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MKE04Z64VLH4 (same form factor and footprint) — differing in Package, Data Bus Width, ESD Performance, Product Type.

NXP Semiconductors
Package: 44-LQFP, 10 x 10 mm
Data Bus Width: 32 bits
ESD Performance: Enhanced ESD performance
Compare with MKE04Z64VLH4 →
NXP Semiconductors
Package: 64-LQFP/QFP (14x14 mm)
Data Bus Width: 32-bit
Compare with MKE04Z64VLH4 →

MKE04Z64VLH4R

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
Reel-packaged order code versus the target's tray packaging; CPU remains 48 MHz, flash remains 64 KB, and the package remains 64-LQFP.

📋 Reference alternative (not in catalog)

MKE06Z64VLH6

✅ Drop-In
📦 64-LQFP (10 x 10 mm)
KE06-family device with the same stated 64 KB flash memory; the exact pin mapping and peripheral differences are not documented in the cited comparison result.

📋 Reference alternative (not in catalog)

MKE04Z64VLH4 Maximum Ratings & Electrical Characteristics

Product Type 32-bit Kinetis KE04 microcontroller
Processor Core Arm Cortex-M0+
Architecture ARM 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
Operating Supply 3.3 V or 5 V
Package 64-LQFP, 10 x 10 mm
Total Pin Count 64 pins
Mounting Type Surface mount
Product Lifecycle Status Active
ESD Performance Enhanced ESD protection
EMC Performance Enhanced EMC performance
Packaging Tray
Datasheet Document Length 37 pages
Datasheet File Size 670 KB

MKE04Z64VLH4 64-lqfp, 10 x 10 mm Pin Configuration Guide

Pin configuration for MKE04Z64VLH4 (64-lqfp, 10 x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-lqfp, 10 x 10 mm package pinout diagram for MKE04Z64VLH4

No detailed pinout data available for MKE04Z64VLH4.

Refer to the datasheet for full pin configuration.

Typical Applications

MKE04Z64VLH4 is suitable for 6 applications: Industrial Motor-Control Subsystems, Appliance Control Modules, Sensor and Measurement Hubs, Building Equipment Interfaces, Cost-Sensitive Consumer Devices, Robust Embedded Control Platforms.

🏭

Industrial Motor-Control Subsystems

The MKE04Z64VLH4 fits compact motor-control subsystems that need deterministic embedded processing without a high-power application processor. Its 48 MHz Arm Cortex-M0+ core supports responsive control-loop execution, while 64 KB flash accommodates firmware for sequencing, fault handling, and motor-control logic. The 64-LQFP 10 x 10 mm package also exposes the GPIO, timer, and analog resources typically needed for sensing and actuator control. The KE04 family's enhanced ESD and EMC characteristics are particularly relevant when the controller sits near motors, relays, and switching power stages. Before finalizing the design, verify the required timer channels, PWM outputs, encoder interfaces, analog inputs, and operating-temperature limits in the manufacturer datasheet.

🔧

Appliance Control Modules

The MKE04Z64VLH4 can serve as the main controller in an appliance module combining user controls, motors, sensors, and communication interfaces. A 48 MHz Cortex-M0+ processor provides ample control capability for state machines and real-time peripheral handling, while the 64 KB flash budget is suitable for compact embedded firmware. Its 3.3 V or 5 V operating designation supports common appliance electronics, and the 64-LQFP package remains straightforward for production inspection. The Kinetis KE04 family's enhanced ESD and EMC performance helps when the board is connected to noisy switches, relays, or inductive loads. Validate the power architecture, reset behavior, brownout handling, and peripheral multiplexing against the exact device documentation.

🧩

Sensor and Measurement Hubs

The MKE04Z64VLH4 is appropriate for a sensor hub that must gather digital and analog measurements, apply calibration, and forward processed results. Its 48 MHz Arm Cortex-M0+ core can manage multiple I/O events and communication tasks, while 64 KB flash provides space for configuration, calibration tables, and application firmware. The 64-LQFP 10 x 10 mm footprint integrates readily into a compact acquisition board and exposes enough pins for sensors, status indicators, and a host interface. Enhanced ESD and EMC behavior is useful in industrial environments where transient coupling and radiated noise are design concerns. Confirm the selected ADC resources, communication peripherals, reference accuracy, and analog operating limits in the manufacturer datasheet.

🏭

Building Equipment Interfaces

The MKE04Z64VLH4 can implement a compact interface or supervisory controller for building equipment such as HVAC units, access panels, and environmental controllers. The 48 MHz Cortex-M0+ processor supports responsive handling of switches, sensors, indicators, and serial communications, while 64 KB flash accommodates field-configurable control logic. Its 3.3 V or 5 V supply designation and 64-LQFP 10 x 10 mm package simplify integration into control boards that require a conventional, inspectable surface-mount package. The KE04 family's enhanced ESD and EMC characteristics are valuable when the interface connects to long external wiring. Validate the exact peripheral mix, operating-temperature range, watchdog behavior, and communications requirements before production release.

📱

Cost-Sensitive Consumer Devices

The MKE04Z64VLH4 can support compact consumer products that combine simple user interaction, status control, and accessory communication. The Arm Cortex-M0+ architecture provides an established 32-bit software platform, while 48 MHz operation and 64 KB flash balance processing capability against a modest embedded footprint. The 64-LQFP package allows leaded visual inspection and works with established surface-mount assembly processes. The Kinetis KE04 family's focus on cost-sensitive, high-reliability applications makes the device suitable for products that require more capability than a simple fixed-function controller but do not need a high-performance processor. Confirm the RAM requirement, peripheral availability, package tolerances, and all EMC requirements for the finished enclosure.

⚡

Robust Embedded Control Platforms

The MKE04Z64VLH4 is suited to robust embedded platforms that need predictable control performance in electrically noisy environments. The 48 MHz Arm Cortex-M0+ processor handles real-time tasks, and the Kinetis KE04 family's enhanced ESD and EMC characteristics help designers address signal-integrity and transient-immunity concerns near industrial equipment. A 64 KB flash region supports control software, diagnostics, and parameter storage, while the 64-LQFP 10 x 10 mm package supports conventional PCB assembly. When deploying the MCU in a control platform, pair the pin assignments with careful grounding, decoupling, protection, and signal-routing practices. Use the manufacturer data sheet for the complete pin multiplex, electrical characteristics, and application circuit recommendations.

Recommended Products Summary

MKE04Z64VLH4 NXP Semiconductors Used in: Industrial Motor-Control Subsystems, Appliance Control Modules, Sensor and Measurement Hubs, Building Equipment Interfaces, Cost-Sensitive Consumer Devices, Robust Embedded Control Platforms MKE04Z64VLH4R Reel-format ordering option Used in: Industrial Motor-Control Subsystems, Appliance Control Modules, Sensor and Measurement Hubs, Building Equipment Interfaces, Cost-Sensitive Consumer Devices, Robust Embedded Control Platforms
What is the MKE04Z64VLH4?
The MKE04Z64VLH4 is an active NXP Semiconductors Kinetis KE04 microcontroller with a 48 MHz Arm Cortex-M0+ processor, 64 KB of flash memory, and a 64-LQFP 10 x 10 mm package. The NXP product page identifies the part as a cost-sensitive industrial MCU, while the KE04 family emphasizes enhanced ESD and EMC performance for equipment used in electrically noisy environments.
What are the key specifications of MKE04Z64VLH4?
The principal MKE04Z64VLH4 specifications are a 48 MHz maximum CPU frequency, 64 KB of flash memory, a 3.3 V or 5 V operating supply, and a 64-LQFP 10 x 10 mm package. The device uses a 32-bit Arm Cortex-M0+ core and belongs to NXP's Kinetis KE04 family. Confirm the complete peripheral map, RAM configuration, and electrical limits against the manufacturer datasheet.
Where can I download the MKE04Z64VLH4 datasheet PDF?
The MKE04Z64VLH4 datasheet can be downloaded from NXP's KE04 Sub-Family Data Sheet page at https://www.nxp.com/docs/en/data-sheet/MKE04P80M48SF0.pdf. The document covers the KE04 family and contains the device pin assignments, electrical characteristics, peripheral descriptions, and package information needed for hardware and firmware development.
Where can I find the MKE04Z64VLH4 pinout?
The authoritative MKE04Z64VLH4 pin assignment is in the pin-description table of the NXP KE04 Sub-Family Data Sheet. The device uses a 64-LQFP package with dimensions of 10 x 10 mm, so its footprint has 64 numbered pins. Use that table when assigning multiplexed GPIO, communication, timer, debug, and power functions rather than relying on a generic 64-pin diagram.
What is the difference between MKE04Z64VLH4 and MKE04Z64VLH4R?
Both MKE04Z64VLH4 and MKE04Z64VLH4R are 64-LQFP Kinetis KE04 devices with a 48 MHz Arm Cortex-M0+ processor and 64 KB flash. The documented order-code difference is the final R character, which denotes a reel-oriented shipping format, while MKE04Z64VLH4 is identified as tray packaged. For PCB substitution, verify reel orientation, dry-packing, and the manufacturer's handling requirements in addition to electrical compatibility.
Can MKE04Z64VLH4 be used in industrial control systems?
Yes, the MKE04Z64VLH4 is suitable for cost-sensitive industrial control systems requiring a 48 MHz Arm Cortex-M0+ core, 64 KB flash, and enhanced ESD and EMC performance. Its 64-LQFP package supports inspection and conventional surface-mount assembly. Final suitability still depends on the ambient temperature, transient environment, communication requirements, and safety margins specified for the finished equipment.
When should I choose MKE04Z64VLH4 over another 64-LQFP Cortex-M0+ MCU?
Choose the MKE04Z64VLH4 when the design specifically benefits from the Kinetis KE04 family's 48 MHz Cortex-M0+ performance, 64 KB flash, enhanced ESD and EMC characteristics, and NXP's established KE04 ecosystem. Choose another MCU when it offers a larger memory footprint, more peripherals, a different security feature set, or a verified software migration path that better matches the product requirements.
Is MKE04Z64VLH4 suitable for motor control and appliance controllers?
The MKE04Z64VLH4 can support motor-control and appliance-control designs that fit within its 48 MHz processing rate, 64 KB flash budget, and available I/O and peripherals. Its Kinetis KE04 positioning emphasizes cost-sensitive industrial applications and enhanced ESD and EMC behavior. Validate the selected timer channels, PWM resources, analog inputs, and protection architecture against the manufacturer datasheet.
What can replace MKE04Z64VLH4?
The closest documented same-family ordering option is MKE04Z64VLH4R, which retains the 48 MHz Cortex-M0+ core, 64 KB flash, and 64-LQFP package while changing the shipping format from tray to reel. Treat it as a drop-in device only after confirming pin compatibility, temperature grade, clock settings, firmware configuration, and reel orientation against the manufacturer datasheet.
Is the MKE04Z64VLH4 the same as the MKE04Z64VLH4R?
The MKE04Z64VLH4 and MKE04Z64VLH4R share the Kinetis KE04 architecture, 48 MHz Arm Cortex-M0+ processor, 64 KB flash, and 64-LQFP package. Their documented difference is the final order-code character associated with reel packaging, compared with the tray form of MKE04Z64VLH4. Electrical behavior should be checked in the family datasheet before using either ordering option.
MKE04Z64VLH4 vs MKE06Z64VLH6 - which MCU is better for a new design?
The MKE04Z64VLH4 is the appropriate choice when the KE04 family's 48 MHz Cortex-M0+ core, 64 KB flash, and enhanced ESD and EMC positioning satisfy the application. Consider MKE06Z64VLH6 when its additional KE06-family resources provide a justified advantage. Because the exact MKE06 pin and peripheral differences are not published in the cited product data, do not treat it as a drop-in replacement without a complete footprint and firmware review.
Where can I buy MKE04Z64VLH4 online?
Use the Request a Quote form on this page to request the NXP Semiconductors MKE04Z64VLH4 by exact order code and obtain a current commercial response for the required quantity. Specify whether you need the tray-packaged MKE04Z64VLH4 or an approved alternative order code, and provide your delivery location, schedule, and assembly requirements with the request.
What is the price of MKE04Z64VLH4?
Submit the MKE04Z64VLH4 request through the Request a Quote form on this page to obtain the current unit and volume pricing for your quantity and packaging requirements. The form is the appropriate channel because industrial MCU pricing can vary with order quantity, tray or reel format, acquisition schedule, and authorized distribution arrangements.
What is the lead time and stock status for MKE04Z64VLH4?
Request the current lead time, minimum order quantity, and allocation status through the Request a Quote form on this page. NXP lists MKE04Z64VLH4 as active, but production timing and orderable stock can change independently of lifecycle status. Include your required delivery date and quantity so the commercial response reflects the actual procurement plan.
Is MKE04Z64VLH4 RoHS compliant and automotive qualified?
The RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status of MKE04Z64VLH4 must be confirmed from the current manufacturer product declaration or the applicable compliance documentation. The cited product information confirms the active lifecycle status and industrial orientation but does not establish those compliance qualifications, so it should not be treated as an automotive-qualified device without explicit AEC-Q100 documentation.

Engineering reference data for MKE04Z64VLH4 — comparison, design guidance, and compliance information.

Selection Guide

Choose the MKE04Z64VLH4 when the product requires a 48 MHz Arm Cortex-M0+ controller with 64 KB flash, a 3.3 V or 5 V supply, and the enhanced ESD and EMC positioning of the Kinetis KE04 family. Its 64-LQFP 10 x 10 mm package is appropriate for cost-sensitive industrial, appliance, motor-control, and measurement designs. Choose MKE04Z64VLH4R when the electrical design is unchanged but reel-format procurement and assembly are preferred; verify orientation and handling requirements. Consider MKE06Z64VLH6 when its additional family resources are needed, but confirm its pin map, peripheral set, clocking, and firmware implications before treating it as a direct replacement. For any redesign, do not base equivalence solely on package count or flash density: power pins, alternate functions, analog resources, clock topology, temperature grade, and application-specific certifications must also match.

Comparison with Alternatives

Parameter This Product MKE04Z64VLH4R MKE06Z64VLH6
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Series Kinetis KE04 Kinetis KE04 Kinetis KE06
Flash Memory 64 KB 64 KB 64 KB

Key Differentiators

  • Identical documented core and memory configuration (vs MKE04Z64VLH4R)
  • Direct tray-format ordering option (vs MKE04Z64VLH4R)
  • KE04 family ESD and EMC positioning (vs MKE06Z64VLH6)

Design Notes

Assign every footprint pad from the NXP KE04 pin-description table and preserve the package's thermal and electrical land pattern exactly. The MKE04Z64VLH4 is a 64-LQFP, 10 x 10 mm device with exposed perimeter leads and a fine-pitch footprint. Check alternate-function routing for every used GPIO, communication, timer, debug, reset, and power pin because muxed functions can require dedicated signal paths that are not interchangeable by signal name alone.

Follow the manufacturer power-supply and decoupling recommendations, including the specified supply range and application-circuit component values. Place required input and output capacitors close to their associated pins, maintain a low-impedance return path, and route high-current or switching-supply paths away from sensitive analog and communication inputs. The cited device information identifies 3.3 V or 5 V operation but does not provide complete capacitor values or current limits, so those values must be confirmed in the manufacturer datasheet before schematic release.

Plan the PCB layout around the 48 MHz Arm Cortex-M0+ clock, debug interface, communication pins, and any high-speed external signals. Keep the clock path short and isolated from noisy motor, relay, and switching-regulator nodes. Provide a clean ground reference beneath the device where the package and layout rules permit, and use the manufacturer's application circuit as the basis for component placement and signal routing rather than adapting a generic microcontroller footprint.

Do not substitute MKE04Z64VLH4 solely because another part also has 64 KB flash or uses a 64-LQFP package. Confirm the CPU frequency, processor core, pin multiplex, power pins, analog resources, temperature grade, firmware compatibility, and package dimensions. The documented MKE04Z64VLH4R has the same core, flash size, and package but uses a reel shipping format, so procurement and incoming inspection plans must distinguish it from the tray-packaged target MPN.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product information does not state a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for MKE04Z64VLH4. Confirm current compliance documents with NXP before using the device in a regulated application.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

MKE04Z64VLH4 datasheet MKE04Z64VLH4 datasheet pdf MKE04Z64VLH4 pinout MKE04Z64VLH4 specifications MKE04Z64VLH4 replacement MKE04Z64VLH4 equivalent MKE04Z64VLH4 price MKE04Z64VLH4 stock NXP MKE04Z64VLH4 MKE04Z64VLH4 LQFP-64 footprint MKE04Z64VLH4 vs MKE06Z64VLH6 MKE04Z64VLH4 motor control application MKE04Z64VLH4 industrial controller MKE04Z64VLH4 schematic

Related Components & Terms

NXP Semiconductors MKE04Z64VLH4 MKE04Z64VLH4R MKE06Z64VLH6 Kinetis KE04 Kinetis E series Arm Cortex-M0+ microcontroller MCU 32-bit microcontroller embedded processor semiconductor 64 KB flash memory 48 MHz CPU 64-LQFP LQFP package family surface mount SMD industrial control motor control appliance control sensor hub ESD protection EMC performance 3.3 V or 5 V operation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details