MKE04Z64VLH4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MPN: MKE04Z64VLH4 ✓ Hoạt độngMKE04Z64VLH4 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The Kinetis KE04 belongs to the Kinetis E series and combines an Arm Cortex-M0+ processor with embedded flash, SRAM, GPIO, timers, serial interfaces, and analog peripherals. This combination provides a compact platform for motor control, appliance control, industrial interfaces, and embedded measurement systems.
The principal specifications include a 48 MHz maximum CPU frequency, 64 KB of programmable flash, an operating supply identified as 3.3 V or 5 V, and a 64-pin LQFP package. The KE04 family also emphasizes enhanced ESD and EMC behavior for cost-sensitive, high-reliability applications. NXP identifies the MKE04Z64VLH4 as an active part, supporting lifecycle planning for new and existing industrial designs.
The Arm Cortex-M0+ architecture uses a compact instruction set optimized for embedded control while retaining the software ecosystem associated with Arm processors. The 64 KB flash region provides room for application code, configuration data, and boot logic. Peripheral integration reduces the number of discrete devices required for sensing, timing, communications, and general-purpose I/O, helping simplify board layouts in space-constrained equipment.
Typical uses include industrial control panels, motor-control subsystems, appliance controllers, building equipment, sensor-hub boards, and compact consumer products. The 10 x 10 mm LQFP package is easy to inspect and assemble, while the Cortex-M0+ platform supports event-driven firmware for responsive control without requiring a high-power processor.
Design the PCB with the manufacturer pin-assignment table as the controlling reference for GPIO multiplexing and alternate functions. Confirm the exact SRAM configuration, peripheral set, operating-temperature limits, clock tolerances, and decoupling requirements in the manufacturer datasheet before schematic release. The tray packaging designation should be checked against the assembly process and incoming-inventory plan.
This product page combines the manufacturer device information with practical procurement, application, and design guidance. It also distinguishes the exact MKE04Z64VLH4 order code from documented related variants and clearly identifies the electrical details that still require confirmation from the full manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho MKE04Z64VLH4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MKE04Z64VLH4 (cùng hình factor và footprint) — khác nhau ở Package, Data Bus Width, ESD Performance, Product Type.
MKE04Z64VLH4R
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKE06Z64VLH6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKE04Z64VLH4 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit Kinetis KE04 microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Operating Supply | 3.3 V or 5 V |
| Hộp | 64-LQFP, 10 x 10 mm |
| Total Pin Count | 64 pins |
| Kiểu lắp đặt | Surface mount |
| Product Lifecycle Status | Active |
| ESD Performance | Enhanced ESD protection |
| EMC Performance | Enhanced EMC performance |
| Packaging | Tray |
| Datasheet Document Length | 37 pages |
| Datasheet File Size | 670 KB |
Hướng dẫn cấu hình chân MKE04Z64VLH4 64-lqfp, 10 x 10 mm
Cấu hình chân cho MKE04Z64VLH4 (64-lqfp, 10 x 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MKE04Z64VLH4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MKE04Z64VLH4 phù hợp cho 6 Áp dụngs: Industrial Motor-Control Subsystems, Appliance Control Modules, Sensor and Measurement Hubs, Building Equipment Interfaces, Cost-Sensitive Consumer Devices, Robust Embedded Control Platforms.
Industrial Motor-Control Subsystems
The MKE04Z64VLH4 fits compact motor-control subsystems that need deterministic embedded processing without a high-power application processor. Its 48 MHz Arm Cortex-M0+ core supports responsive control-loop execution, while 64 KB flash accommodates firmware for sequencing, fault handling, and motor-control logic. The 64-LQFP 10 x 10 mm package also exposes the GPIO, timer, and analog resources typically needed for sensing and actuator control. The KE04 family's enhanced ESD and EMC characteristics are particularly relevant when the controller sits near motors, relays, and switching power stages. Before finalizing the design, verify the required timer channels, PWM outputs, encoder interfaces, analog inputs, and operating-temperature limits in the manufacturer datasheet.
Được đề xuất
Appliance Control Modules
The MKE04Z64VLH4 can serve as the main controller in an appliance module combining user controls, motors, sensors, and communication interfaces. A 48 MHz Cortex-M0+ processor provides ample control capability for state machines and real-time peripheral handling, while the 64 KB flash budget is suitable for compact embedded firmware. Its 3.3 V or 5 V operating designation supports common appliance electronics, and the 64-LQFP package remains straightforward for production inspection. The Kinetis KE04 family's enhanced ESD and EMC performance helps when the board is connected to noisy switches, relays, or inductive loads. Validate the power architecture, reset behavior, brownout handling, and peripheral multiplexing against the exact device documentation.
Được đề xuất
Sensor and Measurement Hubs
The MKE04Z64VLH4 is appropriate for a sensor hub that must gather digital and analog measurements, apply calibration, and forward processed results. Its 48 MHz Arm Cortex-M0+ core can manage multiple I/O events and communication tasks, while 64 KB flash provides space for configuration, calibration tables, and application firmware. The 64-LQFP 10 x 10 mm footprint integrates readily into a compact acquisition board and exposes enough pins for sensors, status indicators, and a host interface. Enhanced ESD and EMC behavior is useful in industrial environments where transient coupling and radiated noise are design concerns. Confirm the selected ADC resources, communication peripherals, reference accuracy, and analog operating limits in the manufacturer datasheet.
Được đề xuất
Building Equipment Interfaces
The MKE04Z64VLH4 can implement a compact interface or supervisory controller for building equipment such as HVAC units, access panels, and environmental controllers. The 48 MHz Cortex-M0+ processor supports responsive handling of switches, sensors, indicators, and serial communications, while 64 KB flash accommodates field-configurable control logic. Its 3.3 V or 5 V supply designation and 64-LQFP 10 x 10 mm package simplify integration into control boards that require a conventional, inspectable surface-mount package. The KE04 family's enhanced ESD and EMC characteristics are valuable when the interface connects to long external wiring. Validate the exact peripheral mix, operating-temperature range, watchdog behavior, and communications requirements before production release.
Được đề xuất
Cost-Sensitive Consumer Devices
The MKE04Z64VLH4 can support compact consumer products that combine simple user interaction, status control, and accessory communication. The Arm Cortex-M0+ architecture provides an established 32-bit software platform, while 48 MHz operation and 64 KB flash balance processing capability against a modest embedded footprint. The 64-LQFP package allows leaded visual inspection and works with established surface-mount assembly processes. The Kinetis KE04 family's focus on cost-sensitive, high-reliability applications makes the device suitable for products that require more capability than a simple fixed-function controller but do not need a high-performance processor. Confirm the RAM requirement, peripheral availability, package tolerances, and all EMC requirements for the finished enclosure.
Được đề xuất
Robust Embedded Control Platforms
The MKE04Z64VLH4 is suited to robust embedded platforms that need predictable control performance in electrically noisy environments. The 48 MHz Arm Cortex-M0+ processor handles real-time tasks, and the Kinetis KE04 family's enhanced ESD and EMC characteristics help designers address signal-integrity and transient-immunity concerns near industrial equipment. A 64 KB flash region supports control software, diagnostics, and parameter storage, while the 64-LQFP 10 x 10 mm package supports conventional PCB assembly. When deploying the MCU in a control platform, pair the pin assignments with careful grounding, decoupling, protection, and signal-routing practices. Use the manufacturer data sheet for the complete pin multiplex, electrical characteristics, and application circuit recommendations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MKE04Z64VLH4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MKE04Z64VLH4R | MKE06Z64VLH6 |
|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Series | Kinetis KE04 | Kinetis KE04 | Kinetis KE06 |
| Flash Memory | 64 KB | 64 KB | 64 KB |
Bảo phân biệt quan trọng
- Identical documented core and memory configuration (vsMKE04Z64VLH4R)
- Direct tray-format ordering option (vsMKE04Z64VLH4R)
- KE04 family ESD and EMC positioning (vsMKE06Z64VLH6)
Ghi chú thiết kế
Assign every footprint pad from the NXP KE04 pin-description table and preserve the package's thermal and electrical land pattern exactly. The MKE04Z64VLH4 is a 64-LQFP, 10 x 10 mm device with exposed perimeter leads and a fine-pitch footprint. Check alternate-function routing for every used GPIO, communication, timer, debug, reset, and power pin because muxed functions can require dedicated signal paths that are not interchangeable by signal name alone.
Follow the manufacturer power-supply and decoupling recommendations, including the specified supply range and application-circuit component values. Place required input and output capacitors close to their associated pins, maintain a low-impedance return path, and route high-current or switching-supply paths away from sensitive analog and communication inputs. The cited device information identifies 3.3 V or 5 V operation but does not provide complete capacitor values or current limits, so those values must be confirmed in the manufacturer datasheet before schematic release.
Plan the PCB layout around the 48 MHz Arm Cortex-M0+ clock, debug interface, communication pins, and any high-speed external signals. Keep the clock path short and isolated from noisy motor, relay, and switching-regulator nodes. Provide a clean ground reference beneath the device where the package and layout rules permit, and use the manufacturer's application circuit as the basis for component placement and signal routing rather than adapting a generic microcontroller footprint.
Do not substitute MKE04Z64VLH4 solely because another part also has 64 KB flash or uses a 64-LQFP package. Confirm the CPU frequency, processor core, pin multiplex, power pins, analog resources, temperature grade, firmware compatibility, and package dimensions. The documented MKE04Z64VLH4R has the same core, flash size, and package but uses a reel shipping format, so procurement and incoming inspection plans must distinguish it from the tray-packaged target MPN.
Thông tin tuân thủ
The available product information does not state a definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for MKE04Z64VLH4. Confirm current compliance documents with NXP before using the device in a regulated application.