NXP Semiconductors

MKL02Z16VFK4 - 48MHz Cortex-M0+ 16KB MCU | NXP | IoT

MPN: MKL02Z16VFK4 ✓ Active
3.3 V Vdss 24-QFN (4 x 4 mm) Package 48 MHz Speed 16 KB Memory
MOQ: 1 |

MKL02Z16VFK4 Overview

The NXP MKL02Z16VFK4 is a 32-bit Arm Cortex-M0+ Kinetis KL02 microcontroller operating up to 48 MHz, with 16 KB of flash memory and a 24-QFN 4 x 4 mm package. It is designed for compact, low-power embedded products that need efficient 32-bit processing without the size or power requirements of a larger microcontroller.

A microcontroller, or MCU, integrates a processor core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The Kinetis KL02 belongs to the Kinetis L series of energy-efficient 32-bit MCUs. Its Cortex-M0+ core provides a simple instruction set and efficient code execution, while the KL0x family provides a migration path from 8-bit designs without changing the broader software tool compatibility used across the Kinetis L series.

The MKL02Z16VFK4 combines a 48 MHz operating frequency with 16 KB of flash in a compact 24-QFN package. This combination is useful for compact sensor nodes, portable accessories, and control products where board area is limited. The NXP product page identifies the device as active, and its operating features emphasize low-power operation for battery-powered and energy-conscious designs.

Within the system hierarchy, the MKL02Z16VFK4 is an Arm Cortex-M0+ MCU, a 32-bit microcontroller, and a member of the Kinetis L series. Its compact package supports high-density PCB layouts, while the Cortex-M0+ platform supports familiar embedded development workflows for control loops, digital interfaces, and low-power sensing products. The 3.3 V device is also identified in the product documentation as a 24-pin QFN device with an exposed thermal pad.

Typical applications include small-format IoT sensors, portable health and wellness devices, remote sensing nodes, compact consumer accessories, and embedded control modules. In these systems, the 48 MHz processor can execute control and communication software while the 16 KB flash footprint limits firmware size. Designers should confirm the complete peripheral set, memory map, pin assignments, and electrical limits against the manufacturer datasheet before finalizing a PCB.

A key design consideration is exposed-pad layout and thermal management. The 4 x 4 mm QFN has no large lead frame, so the exposed pad and copper pours provide the primary heat-spreading path. Place the device according to the manufacturer land pattern, maintain its recommended via arrangement, and verify decoupling requirements directly in the NXP datasheet.

This product page combines the exact NXP identification, package, core, frequency, and memory information with engineering-oriented application guidance, structured comparisons, and design cautions. It is intended to help engineers identify the correct MCU, plan its PCB implementation, and evaluate family alternatives before requesting a quote.

Drop-in alternatives for MKL02Z16VFK4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MKL02Z16VFK4 (same form factor and footprint) — differing in Flash Memory, Product Type.

NXP Semiconductors
Flash Memory: 32 KB (32K x 8 bits)
Product Type: 32-bit microcontroller (MCU)
Compare with MKL02Z16VFK4 →

MKL02Z32VFK4

✅ Drop-In ⚠️ Specs Unverified
NXP Semiconductors
📦 24-QFN (4 x 4 mm)
NXP Semiconductors · 32-bit microcontroller (MCU) · Kinetis KL02 · Arm Cortex-M0+ · 48 MHz · 32 KB (32K x 8 bits) · 3.3 V · 12 bit

Contact for price

View Datasheet →

MKL02Z16VFM4

✅ Drop-In ⚠️ Specs Unverified
📦 24-QFN (4 x 4 mm)
Same 48 MHz Cortex-M0+ core, 16 KB flash, and 3.3 V supply; temperature-grade suffix differs

📋 Reference alternative (not in catalog)

MKL02Z16VFL4

✅ Drop-In ⚠️ Specs Unverified
📦 24-QFN (4 x 4 mm)
Same 48 MHz Cortex-M0+ core, 16 KB flash, and 3.3 V supply; temperature-grade suffix differs

📋 Reference alternative (not in catalog)

MKL02Z32VFL4

✅ Drop-In ⚠️ Specs Unverified
📦 24-QFN (4 x 4 mm)
Flash increases from 16 KB to 32 KB, a 100% increase; core frequency and package remain compatible

📋 Reference alternative (not in catalog)

MKL03Z16VFK4

✅ Drop-In
📦 24-QFN (4 x 4 mm)
Same 48 MHz Cortex-M0+ core and 16 KB flash; KL03-family peripherals and register features differ from KL02

📋 Reference alternative (not in catalog)

MKL02Z16VFK4 Maximum Ratings & Electrical Characteristics

Manufacturer NXP Semiconductors
Product Type 32-bit microcontroller
Product Family Kinetis KL02
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bits
Supply Voltage 3.3 V
Package 24-QFN (4 x 4 mm)
Pin Count 24 pins
Exposed Thermal Pad Present
Mounting Type Surface mount
Lifecycle Status Active

MKL02Z16VFK4 24-qfn (4 x 4 mm) Pin Configuration Guide

Pin configuration for MKL02Z16VFK4 (24-qfn (4 x 4 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

24-qfn (4 x 4 mm) package pinout diagram for MKL02Z16VFK4

No detailed pinout data available for MKL02Z16VFK4.

Refer to the datasheet for full pin configuration.

Typical Applications

MKL02Z16VFK4 is suitable for 6 applications: Compact IoT Sensor Nodes, Portable Health and Wellness Devices, Remote Sensing and Monitoring, Battery-Powered Portable Accessories, Industrial Control Modules, Compact Consumer Accessories.

🧩

Compact IoT Sensor Nodes

The MKL02Z16VFK4 fits compact IoT sensor nodes that need more processing capability than a basic 8-bit controller without adopting a larger system processor. Its 48 MHz Arm Cortex-M0+ core supports responsive sampling, local filtering, and communication-stack execution, while the 16 KB flash footprint constrains firmware to a compact control application. The 24-QFN 4 x 4 mm package also reduces PCB footprint in distributed sensing products. Designers should use the manufacturer low-power guidance and pin-description table to select sleep modes, configure peripherals, and implement board-level decoupling for battery-operated sensor assemblies.

💊

Portable Health and Wellness Devices

The MKL02Z16VFK4 is appropriate for compact portable health and wellness products that perform light signal acquisition, user-interface control, or sensor fusion while prioritizing a small embedded footprint. Its 32-bit Cortex-M0+ architecture at 48 MHz supports efficient control tasks, and the 16 KB flash provides a defined firmware budget for lean applications. The low-power Kinetis KL platform is particularly relevant to wearable-style products operated from small batteries. Before committing to the device, engineers should verify the required analog interfaces, memory demand, operating temperature range, and exposed-pad layout in the NXP documentation.

🌐

Remote Sensing and Monitoring

The MKL02Z16VFK4 can serve as the local controller in a remote sensing assembly that periodically reads environmental or equipment parameters, evaluates thresholds, and controls a communications interface. A 48 MHz Cortex-M0+ core provides efficient 32-bit execution without a complex application processor, while the small 24-QFN package suits densely populated remote nodes. The 16 KB flash budget should be checked against the sensing algorithm, communications state machine, configuration data, and update requirements. Power-gating, sleep behavior, and wake-up timing must be evaluated from the manufacturer datasheet for each deployment environment.

📱

Battery-Powered Portable Accessories

For battery-powered portable accessories, the MKL02Z16VFK4 combines a 48 MHz Cortex-M0+ core with a compact 4 x 4 mm QFN package, allowing control logic to be placed close to sensors and power-management circuitry. Its 16 KB flash is sufficient for focused firmware when the product does not require complex graphical interfaces or large local data storage. The KL0x family's low-power positioning makes it relevant to wearables, compact personal accessories, and handheld utility products. Engineers should establish the acceptable sleep current, active-current budget, analog accuracy, and temperature limits before selecting the MCU and its supporting passives.

🏭

Industrial Control Modules

The MKL02Z16VFK4 can be integrated into small industrial control modules for status monitoring, actuator sequencing, and local diagnostics. The 48 MHz Cortex-M0+ processor provides deterministic control capability for compact embedded logic, while the 24-QFN package supports dense board layouts. Its 16 KB flash requires disciplined firmware sizing, but it can be effective when the module handles a bounded control task rather than a full human-machine interface. Industrial use requires checking the exact temperature grade, supply tolerances, ESD and EMC design requirements, watchdog behavior, and peripheral coverage against the NXP datasheet.

🔧

Compact Consumer Accessories

The MKL02Z16VFK4 is suitable for compact consumer accessories that need deterministic embedded control, such as configurable peripherals, simple appliance controls, and small interface modules. The 32-bit Cortex-M0+ core executes at up to 48 MHz, providing enough performance for real-time control and lightweight protocol handling without the complexity of a higher-performance processor. The 16 KB program memory favors a focused firmware image, and the 4 x 4 mm QFN helps minimize PCB area. Final selection should account for the required interfaces, update method, operating-temperature grade, regulatory requirements, and exposed-pad copper design.

Recommended Products Summary

MKL02Z16VFK4 NXP Semiconductors Used in: Compact IoT Sensor Nodes, Portable Health and Wellness Devices, Remote Sensing and Monitoring, Battery-Powered Portable Accessories, Industrial Control Modules, Compact Consumer Accessories MKL03Z16VFK4 Related Kinetis L series MCU for comparative design evaluation Used in: Compact IoT Sensor Nodes, Remote Sensing and Monitoring, Compact Consumer Accessories MKL02Z32VFK4 NXP Semiconductors Used in: Portable Health and Wellness Devices, Industrial Control Modules MKL02Z16VFM4 Same-family pin-compatible MCU with a different temperature suffix Used in: Battery-Powered Portable Accessories
What is the NXP MKL02Z16VFK4 microcontroller?
The NXP MKL02Z16VFK4 is a 32-bit Kinetis KL02 microcontroller built around an Arm Cortex-M0+ core and operating up to 48 MHz. According to the NXP product page, it belongs to the Kinetis L series and provides 16 KB of flash in a compact 24-QFN package measuring 4 x 4 mm. It is intended for low-power embedded systems where a small footprint and efficient 32-bit control architecture are important.
What are the key specifications of MKL02Z16VFK4 that engineers should know?
The MKL02Z16VFK4 combines a 48 MHz Arm Cortex-M0+ core, 16 KB of flash organized as 16K x 8 bits, a 3.3 V supply, and a 24-QFN package measuring 4 x 4 mm. The NXP product page identifies the Kinetis KL02 device as active, while its family description emphasizes low-power operation and compatibility with the Kinetis L series software ecosystem. Exact RAM, GPIO, and peripheral limits should be checked in the manufacturer datasheet.
Where can I download the MKL02Z16VFK4 datasheet PDF?
The official MKL02Z16VFK4 datasheet and product resources are reached from the NXP product page at https://www.nxp.com/part/MKL02Z16VFK4. That page links to the manufacturer data sheet and preserves the correct ordering information. Use the pin-description table, electrical characteristics, land pattern, and exposed-pad instructions from the NXP datasheet when designing the PCB or validating a board revision.
Where can I find the MKL02Z16VFK4 pinout?
The MKL02Z16VFK4 pinout is documented in the NXP data sheet and the package drawing for its 24-QFN 4 x 4 mm outline. Use the manufacturer pin-description table to assign port pins, power connections, ground connections, programming signals, and the exposed pad. The exposed pad is not a substitute for a numbered package pin and should be connected according to the NXP land-pattern and thermal guidance.
Is MKL02Z16VFK4 suitable for IoT and sensor-node designs?
Yes, the MKL02Z16VFK4 is suitable for compact IoT and sensor-node products because it combines a 48 MHz Cortex-M0+ processor, 16 KB of flash, and a small 4 x 4 mm QFN package. The NXP family information identifies the KL0x devices as low-power MCUs for migration from 8-bit systems. Actual battery-life performance depends on the selected operating mode, peripherals, and the system power architecture.
What is the difference between MKL02Z16VFK4 and MKL03Z16VFK4?
The MKL02Z16VFK4 is a Kinetis KL02 Cortex-M0+ MCU with 16 KB of flash, while MKL03Z16VFK4 is identified as a related KL03-family device with the same 16 KB flash capacity. The comparison data confirms both are 48 MHz Cortex-M0+ products, but their peripheral resources and register-level features can differ. Firmware reuse must therefore be validated against the device headers, reference manual, and errata for each specific part.
Can MKL02Z16VFK4 replace an 8-bit microcontroller?
The MKL02Z16VFK4 can replace an 8-bit MCU when the replacement is allowed to include software and board changes. The NXP family description specifically presents the KL0x series as a migration path for 8-bit customers using the Kinetis L series platform. It uses a 32-bit Cortex-M0+ core and operates up to 48 MHz, but memory consumption, peripheral differences, timing, and toolchain configuration must be reviewed before an in-place substitution.
When should I choose MKL02Z16VFK4 over another Kinetis L series MCU?
Choose the MKL02Z16VFK4 when a design needs the KL02 feature set, a Cortex-M0+ core, 16 KB of flash, and a compact 24-QFN footprint. It is especially relevant to low-power products requiring a transition from 8-bit architecture to the Kinetis L ecosystem. Select a larger family member when the application exceeds 16 KB of flash or requires peripherals not provided by the KL02, after checking each candidate's pinout and memory requirements.
What is the best drop-in replacement for MKL02Z16VFK4?
No substitute can be approved as a drop-in replacement from basic similarity alone. A valid replacement must use the same 24-QFN 4 x 4 mm footprint, preserve pin-to-pin signal assignments, satisfy the 3.3 V supply requirement, provide adequate flash memory, and match the required peripherals. Closest family candidates can be identified through the NXP device selection, but PCB and firmware compatibility must be confirmed before production release.
What can replace MKL02Z16VFK4 in an embedded design?
The closest alternatives are compatible Kinetis L series devices that use the same Cortex-M0+ software platform and offer a suitable 24-QFN footprint, but replacement depends on flash capacity, pin assignments, peripherals, and power requirements. MKL03Z16VFK4 is a relevant comparison point because it retains 16 KB of flash and a 48 MHz Cortex-M0+ core. It should not be treated as drop-in until the package pins and device-specific registers are checked.
How much flash memory does MKL02Z16VFK4 have?
The MKL02Z16VFK4 contains 16 KB of flash memory, organized as 16K x 8 bits. DigiKey's exact-part listing and the NXP product information identify the same 16 KB capacity for this ordering code. Firmware size should be checked against this limit, including the bootloader, interrupt vectors, application code, configuration data, and any planned update functions.
What package and pin count does MKL02Z16VFK4 use?
The MKL02Z16VFK4 uses a 24-QFN package with a body size of 4 x 4 mm and an exposed thermal pad. The package combines 24 perimeter pins with a central exposed pad for thermal and electrical implementation. The QFN-24 package mapping is used for the package diagram, while the manufacturer pin-description and land-pattern drawings remain authoritative for assignments.
Where can I buy MKL02Z16VFK4 online?
Use the Request a Quote form on this XAIPART product page to request MKL02Z16VFK4 availability, current commercial terms, and lead time. The official NXP part page identifies the exact device as active, while distributor listings confirm that the part is catalogued for procurement. The request should specify the required quantity, package form, target date, and any shipment destination.
What is the price of MKL02Z16VFK4?
The current commercial price for MKL02Z16VFK4 is presented through the Request a Quote form on this page. Submit the required quantity and shipment information so the quote reflects current component sourcing and pricing. The exact ordering code is MKL02Z16VFK4, and NXP identifies it as an active part with a 48 MHz Cortex-M0+ core and 16 KB of flash.
Is MKL02Z16VFK4 in stock and what is its lead time?
Current stock status and production lead time for MKL02Z16VFK4 should be confirmed through the Request a Quote form on this page. NXP lists the device as active, and distributor catalog records identify the exact part, but stock and scheduling remain transaction-specific. Include your required quantity, approved packaging form, delivery location, and target production date in the request.

Engineering reference data for MKL02Z16VFK4 — comparison, design guidance, and compliance information.

Selection Guide

Choose MKL02Z16VFK4 for a compact, low-power embedded design that requires a 48 MHz Arm Cortex-M0+ core, 16 KB of flash, and a 24-QFN 4 x 4 mm footprint. It is a strong fit for small sensor nodes, portable accessories, and focused control modules where firmware size and board area are tightly constrained. Select MKL02Z32VFK4 when the application needs twice the flash while retaining the same core, frequency, and package; the larger memory reserve can reduce pressure on bootloader, diagnostics, and update code. Use MKL02Z16VFM4 or MKL02Z16VFL4 when their exact environmental ordering grade matches the product requirements. Consider MKL03Z16VFK4 when its KL03 peripherals and register set provide a functional advantage, but review the pin assignments and device-specific software differences before replacement. For every candidate, verify the operating temperature, SRAM, GPIO, communications interfaces, analog functions, and exposed-pad layout against the manufacturer datasheet.

Comparison with Alternatives

Parameter This Product MKL02Z32VFK4 MKL02Z16VFM4 MKL02Z16VFL4 MKL02Z32VFL4 MKL03Z16VFK4
Package 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 16 KB 32 KB 16 KB 16 KB 32 KB 16 KB
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Product Family Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL03

Key Differentiators

  • 16 KB flash keeps the exact design within a compact firmware envelope (vs MKL02Z32VFK4)
  • 48 MHz Cortex-M0+ performance in a 4 x 4 mm package (vs MKL03Z16VFK4)
  • Compact surface-mount implementation (vs MKL02Z16VFM4)
  • Exact active-family identification (vs MKL02Z32VFL4)

Design Notes

Treat the exposed thermal pad as both an electrical connection and the primary thermal path. Follow the NXP recommended land pattern, including the via configuration beneath the pad where specified, and provide uninterrupted top- and bottom-layer copper. The 4 x 4 mm QFN has no large leads for package-level heat removal, so thermal performance depends heavily on PCB copper. Check the manufacturer junction-temperature, ambient-temperature, and power-dissipation limits against the worst operating condition.

Place input and output decoupling capacitors close to their corresponding device pins using the values and placement rules in the NXP datasheet. Keep the exposed-pad via field within the land pattern and avoid accidental shorts between fine-pitch perimeter pins. Because the package is only 4 x 4 mm, verify the PCB design rules, solder mask, paste stencil, and assembly clearances before releasing manufacturing files.

Do not treat a related Kinetis L series MPN as interchangeable solely because it has a Cortex-M0+ core and similar flash capacity. Confirm package dimensions, perimeter-pin assignments, exposed-pad requirements, power pins, debug interfaces, peripheral instances, reset behavior, and device-specific errata. Firmware built for one device should use the matching header files and startup configuration, and a hardware validation cycle should precede any production substitution.

Build the power tree around the manufacturer's 3.3 V operating condition and verify startup, brownout, and maximum-supply limits in the datasheet. Low-power operation must be evaluated with realistic peripheral activity rather than idle-current figures alone. Account for sensor standby currents, communications duty cycles, regulator efficiency, and leakage from external components when calculating the system battery-life target.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

A distributor product record references RoHS, but no specific compliance declaration was identified for the exact ordering code. Automotive qualification status is not stated.

Related Searches

MKL02Z16VFK4 datasheet MKL02Z16VFK4 pinout MKL02Z16VFK4 datasheet pdf NXP MKL02Z16VFK4 MKL02Z16VFK4 equivalent MKL02Z16VFK4 replacement MKL02Z16VFK4 cross reference MKL02Z16VFK4 footprint MKL02Z16VFK4 price MKL02Z16VFK4 stock MKL02Z16VFK4 vs MKL03Z16VFK4 MKL02Z16 24-QFN pinout MKL02Z16 low power application circuit MKL02Z16VFK4 48MHz 16KB

Related Components & Terms

NXP Semiconductors MKL02Z16VFK4 MKL02Z32VFK4 MKL02Z16VFM4 MKL02Z16VFL4 MKL02Z32VFL4 MKL03Z16VFK4 Arm Cortex-M0+ 32-bit microcontroller Kinetis KL02 Kinetis L series MCU embedded microcontroller semiconductor 24-QFN QFN family surface mount SMD package 48 MHz 16 KB flash 3.3 V low-power design IoT sensor node exposed thermal pad
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details