MKL02Z16VFK4 - 48MHz Cortex-M0+ 16KB MCU | NXP | IoT
部品番号: MKL02Z16VFK4 ✓ 生産中MKL02Z16VFK4 概要
A microcontroller, or MCU, integrates a processor core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The Kinetis KL02 belongs to the Kinetis L series of energy-efficient 32-bit MCUs. Its Cortex-M0+ core provides a simple instruction set and efficient code execution, while the KL0x family provides a migration path from 8-bit designs without changing the broader software tool compatibility used across the Kinetis L series.
The MKL02Z16VFK4 combines a 48 MHz operating frequency with 16 KB of flash in a compact 24-QFN package. This combination is useful for compact sensor nodes, portable accessories, and control products where board area is limited. The NXP product page identifies the device as active, and its operating features emphasize low-power operation for battery-powered and energy-conscious designs.
Within the system hierarchy, the MKL02Z16VFK4 is an Arm Cortex-M0+ MCU, a 32-bit microcontroller, and a member of the Kinetis L series. Its compact package supports high-density PCB layouts, while the Cortex-M0+ platform supports familiar embedded development workflows for control loops, digital interfaces, and low-power sensing products. The 3.3 V device is also identified in the product documentation as a 24-pin QFN device with an exposed thermal pad.
Typical applications include small-format IoT sensors, portable health and wellness devices, remote sensing nodes, compact consumer accessories, and embedded control modules. In these systems, the 48 MHz processor can execute control and communication software while the 16 KB flash footprint limits firmware size. Designers should confirm the complete peripheral set, memory map, pin assignments, and electrical limits against the manufacturer datasheet before finalizing a PCB.
A key design consideration is exposed-pad layout and thermal management. The 4 x 4 mm QFN has no large lead frame, so the exposed pad and copper pours provide the primary heat-spreading path. Place the device according to the manufacturer land pattern, maintain its recommended via arrangement, and verify decoupling requirements directly in the NXP datasheet.
This product page combines the exact NXP identification, package, core, frequency, and memory information with engineering-oriented application guidance, structured comparisons, and design cautions. It is intended to help engineers identify the correct MCU, plan its PCB implementation, and evaluate family alternatives before requesting a quote.
ドロップイン代替品: MKL02Z16VFK4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL02Z16VFK4 (同一形状・フットプリント) — 相違点: Flash Memory, Product Type.
MKL02Z32VFK4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MKL02Z16VFM4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL02Z16VFL4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL02Z32VFL4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL03Z16VFK4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MKL02Z16VFK4 最大定格&電気的特性
| Manufacturer | NXP Semiconductors |
| Product Type | 32-bit microcontroller |
| Product Family | Kinetis KL02 |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| 電源電圧 | 3.3 V |
| パッケージ | 24-QFN (4 x 4 mm) |
| ピン数 | 24 pins |
| Exposed Thermal Pad | Present |
| 実装タイプ | Surface mount |
| ライフサイクル状態 | Active |
MKL02Z16VFK4 24-qfn (4 x 4 mm) ピン配置ガイド
MKL02Z16VFK4 (24-qfn (4 x 4 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL02Z16VFK4.
詳細は データシート をご参照ください。
主な用途
MKL02Z16VFK4 の用途: 6 件s: Compact IoT Sensor Nodes, Portable Health and Wellness Devices, Remote Sensing and Monitoring, Battery-Powered Portable Accessories, Industrial Control Modules, Compact Consumer Accessories.
Compact IoT Sensor Nodes
The MKL02Z16VFK4 fits compact IoT sensor nodes that need more processing capability than a basic 8-bit controller without adopting a larger system processor. Its 48 MHz Arm Cortex-M0+ core supports responsive sampling, local filtering, and communication-stack execution, while the 16 KB flash footprint constrains firmware to a compact control application. The 24-QFN 4 x 4 mm package also reduces PCB footprint in distributed sensing products. Designers should use the manufacturer low-power guidance and pin-description table to select sleep modes, configure peripherals, and implement board-level decoupling for battery-operated sensor assemblies.
おすすめ
Portable Health and Wellness Devices
The MKL02Z16VFK4 is appropriate for compact portable health and wellness products that perform light signal acquisition, user-interface control, or sensor fusion while prioritizing a small embedded footprint. Its 32-bit Cortex-M0+ architecture at 48 MHz supports efficient control tasks, and the 16 KB flash provides a defined firmware budget for lean applications. The low-power Kinetis KL platform is particularly relevant to wearable-style products operated from small batteries. Before committing to the device, engineers should verify the required analog interfaces, memory demand, operating temperature range, and exposed-pad layout in the NXP documentation.
おすすめ
Remote Sensing and Monitoring
The MKL02Z16VFK4 can serve as the local controller in a remote sensing assembly that periodically reads environmental or equipment parameters, evaluates thresholds, and controls a communications interface. A 48 MHz Cortex-M0+ core provides efficient 32-bit execution without a complex application processor, while the small 24-QFN package suits densely populated remote nodes. The 16 KB flash budget should be checked against the sensing algorithm, communications state machine, configuration data, and update requirements. Power-gating, sleep behavior, and wake-up timing must be evaluated from the manufacturer datasheet for each deployment environment.
おすすめ
Battery-Powered Portable Accessories
For battery-powered portable accessories, the MKL02Z16VFK4 combines a 48 MHz Cortex-M0+ core with a compact 4 x 4 mm QFN package, allowing control logic to be placed close to sensors and power-management circuitry. Its 16 KB flash is sufficient for focused firmware when the product does not require complex graphical interfaces or large local data storage. The KL0x family's low-power positioning makes it relevant to wearables, compact personal accessories, and handheld utility products. Engineers should establish the acceptable sleep current, active-current budget, analog accuracy, and temperature limits before selecting the MCU and its supporting passives.
おすすめ
Industrial Control Modules
The MKL02Z16VFK4 can be integrated into small industrial control modules for status monitoring, actuator sequencing, and local diagnostics. The 48 MHz Cortex-M0+ processor provides deterministic control capability for compact embedded logic, while the 24-QFN package supports dense board layouts. Its 16 KB flash requires disciplined firmware sizing, but it can be effective when the module handles a bounded control task rather than a full human-machine interface. Industrial use requires checking the exact temperature grade, supply tolerances, ESD and EMC design requirements, watchdog behavior, and peripheral coverage against the NXP datasheet.
おすすめ
Compact Consumer Accessories
The MKL02Z16VFK4 is suitable for compact consumer accessories that need deterministic embedded control, such as configurable peripherals, simple appliance controls, and small interface modules. The 32-bit Cortex-M0+ core executes at up to 48 MHz, providing enough performance for real-time control and lightweight protocol handling without the complexity of a higher-performance processor. The 16 KB program memory favors a focused firmware image, and the 4 x 4 mm QFN helps minimize PCB area. Final selection should account for the required interfaces, update method, operating-temperature grade, regulatory requirements, and exposed-pad copper design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL02Z16VFK4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL02Z32VFK4 | MKL02Z16VFM4 | MKL02Z16VFL4 | MKL02Z32VFL4 | MKL03Z16VFK4 |
|---|---|---|---|---|---|---|
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 16 KB | 32 KB | 16 KB | 16 KB | 32 KB | 16 KB |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Product Family | Kinetis KL02 | Kinetis KL02 | Kinetis KL02 | Kinetis KL02 | Kinetis KL02 | Kinetis KL03 |
主な差別化要因
- 16 KB flash keeps the exact design within a compact firmware envelope (vs MKL02Z32VFK4)
- 48 MHz Cortex-M0+ performance in a 4 x 4 mm package (vs MKL03Z16VFK4)
- Compact surface-mount implementation (vs MKL02Z16VFM4)
- Exact active-family identification (vs MKL02Z32VFL4)
設計ノート
Treat the exposed thermal pad as both an electrical connection and the primary thermal path. Follow the NXP recommended land pattern, including the via configuration beneath the pad where specified, and provide uninterrupted top- and bottom-layer copper. The 4 x 4 mm QFN has no large leads for package-level heat removal, so thermal performance depends heavily on PCB copper. Check the manufacturer junction-temperature, ambient-temperature, and power-dissipation limits against the worst operating condition.
Place input and output decoupling capacitors close to their corresponding device pins using the values and placement rules in the NXP datasheet. Keep the exposed-pad via field within the land pattern and avoid accidental shorts between fine-pitch perimeter pins. Because the package is only 4 x 4 mm, verify the PCB design rules, solder mask, paste stencil, and assembly clearances before releasing manufacturing files.
Do not treat a related Kinetis L series MPN as interchangeable solely because it has a Cortex-M0+ core and similar flash capacity. Confirm package dimensions, perimeter-pin assignments, exposed-pad requirements, power pins, debug interfaces, peripheral instances, reset behavior, and device-specific errata. Firmware built for one device should use the matching header files and startup configuration, and a hardware validation cycle should precede any production substitution.
Build the power tree around the manufacturer's 3.3 V operating condition and verify startup, brownout, and maximum-supply limits in the datasheet. Low-power operation must be evaluated with realistic peripheral activity rather than idle-current figures alone. Account for sensor standby currents, communications duty cycles, regulator efficiency, and leakage from external components when calculating the system battery-life target.
コンプライアンス情報
A distributor product record references RoHS, but no specific compliance declaration was identified for the exact ordering code. Automotive qualification status is not stated.