Texas Instruments

OPA337UA - 5.5V 3MHz RRO Op Amp | Texas Instruments

MPN: OPA337UA ✓ Active
5.5 V Vdss 8-pin SOIC Package
MOQ: 1 |

OPA337UA Overview

The Texas Instruments OPA337UA is a single, 5.5 V, 3 MHz, rail-to-rail-output CMOS operational amplifier packaged in an 8-pin SOIC. It is intended for low-cost, miniature signal-conditioning applications that require a rail-to-rail output, a 3 MHz gain-bandwidth product, and operation from a low-voltage single supply. The OPA337UA is one member of the MicroAmplifier series and is packaged in the surface-mount SOIC-8 format.

An operational amplifier is an analog building block that amplifies the voltage difference between its two inputs. OPA337UA uses a CMOS implementation, placing it within the hierarchy of linear amplifiers, voltage amplifiers, analog signal-conditioning ICs, and semiconductor devices. Its rail-to-rail output capability allows the output signal to approach the available supply limits, which is especially useful when signal headroom is limited.

The principal device characteristics include one amplifier channel, a maximum supply voltage of 5.5 V, a 3 MHz gain-bandwidth product, rail-to-rail output operation, and an 8-pin SOIC package. According to the Texas Instruments OPA337 product page, the OPA337 and OPA338 series uses advanced CMOS technology and is intended for compact, low-cost applications. These characteristics make the device suitable for sensor interfaces, low-side or general-purpose analog conditioning, ADC driver stages, and embedded portable equipment.

OPA337UA belongs to a family of micro-size CMOS operational amplifiers offered in multiple package configurations. The series description emphasizes rail-to-rail output performance, low-voltage operation, and small physical size. A 3 MHz gain-bandwidth product supports closed-loop operation at moderate signal frequencies, while the single amplifier arrangement avoids the need to allocate a second channel when the application requires only one signal path. Detailed offset, bias-current, noise, slew-rate, common-mode, and thermal limits must be confirmed in the manufacturer datasheet before final circuit sign-off.

Typical applications include buffering sensor outputs, conditioning analog signals for ADC inputs, amplifying low-level control signals in industrial systems, and providing local gain in portable or space-constrained systems. It can also support interface and monitoring functions where a single low-voltage amplifier provides sufficient bandwidth and output range. The 8-pin SOIC footprint is convenient for conventional surface-mount PCB assembly.

Designers should verify the exact input common-mode range, output swing, gain stability, and supply-voltage limits against the circuit operating conditions. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should be kept away from switching-current paths. Because the available public listing confirms the package and headline specifications but does not provide the complete electrical-characteristic table, those detailed values require consultation of the TI datasheet.

This product record combines the confirmed OPA337UA identity and packaging information with a focused engineering comparison of qualified drop-in options, application guidance, and design considerations. It helps buyers distinguish package-compatible alternatives from broader functional equivalents while keeping the final component selection grounded in the manufacturer's published device information.

Drop-in alternatives for OPA337UA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with OPA337UA (same form factor and footprint) — differing in Gain-Bandwidth Product, Package, Amplifier Type, Number of Channels, Mounting Type.

Texas Instruments
Gain-Bandwidth Product: 100 kHz
Compare with OPA337UA →
Texas Instruments
Package: 8-PDIP (package)
Amplifier Type: General-purpose operational amplifier (category)
Number of Channels: 1 circuit (count)
Compare with OPA337UA →
Texas Instruments
Gain-Bandwidth Product: 62.5 MHz
Compare with OPA337UA →
Texas Instruments
Gain-Bandwidth Product: 5.5 MHz
Compare with OPA337UA →
Texas Instruments
Package: SOT-23-5 (DBV, SC-74A, SOT-753)
Amplifier Type: General Purpose Operational Amplifier
Number of Channels: 1
Compare with OPA337UA →

OPA338UA

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-pin SOIC
Single operational amplifier · 5.5 V · 5.5 V · 62.5 MHz · Rail-to-rail output

Contact for price

View Datasheet →

OPA336UA

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Single operational amplifier · CMOS voltage-feedback · 1 amplifier · Single supply · 2.1 V · 5.5 V · 100 kHz · 20 µA per amplifier

Contact for price

View Datasheet →

TLV2371QDBVRQ1

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
General Purpose Operational Amplifier · 1 · Input and Output (RRIO) · 3 MHz · 2.1 V/us · 550 uA per channel · 2.7 V to 16 V (single), +/-1.35 V to +/-8 V (dual) · -40C to +125C

Contact for price

View Datasheet →

MCP6001

✅ Drop-In
📦 8-pin SOIC
Cross-brand SOIC-8 candidate with lower-bandwidth-oriented positioning; input bias current, noise, output swing, supply range, and stability must be verified against OPA337UA.

📋 Reference alternative (not in catalog)

OPA337UA Maximum Ratings & Electrical Characteristics

Amplifier Type Single operational amplifier
Number of Channels 1 circuit
Technology CMOS
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 3 MHz
Output Swing Rail-to-rail output
Package 8-pin SOIC
Mounting Type Surface mount
Product Series MicroAmplifier series

OPA337UA 8-pin soic Pin Configuration Guide

Pin configuration for OPA337UA (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for OPA337UA

No detailed pinout data available for OPA337UA.

Refer to the datasheet for full pin configuration.

Typical Applications

OPA337UA is suitable for 6 applications: Low-Voltage Sensor Signal Conditioning, Portable Analog Measurement Front End, ADC Input Driver, RS-232 Interface Support, Industrial Control and Monitoring, Compact Analog Signal Buffer.

🧩

Low-Voltage Sensor Signal Conditioning

OPA337UA fits low-voltage sensor interfaces that need local amplification before conversion or control. Its single CMOS channel, 3 MHz gain-bandwidth product, and rail-to-rail output provide useful bandwidth and signal range for sensors operating from a supply no higher than 5.5 V. Place the amplifier close to the sensor connector to limit noise pickup, then verify the sensor output range against the amplifier's input common-mode capability. The rail-to-rail output is valuable when the downstream converter accepts signals near the available supply range. Selection must also account for input offset, bias current, noise, output drive, and capacitive-load stability, which are not stated in the accessible product summary and should be confirmed from the manufacturer datasheet.

📱

Portable Analog Measurement Front End

OPA337UA is appropriate for portable instruments that combine a low-voltage sensor, a local gain stage, and an ADC. Its 5.5 V maximum supply rating supports compact single-supply systems, while the 3 MHz gain-bandwidth product can handle moderate-frequency analog signals without requiring a high-speed discrete amplifier family. A practical arrangement places the amplifier in a non-inverting or inverting gain block near the sensor and analog converter. Engineers should check offset drift, bias-current error, noise, and output settling against the measurement bandwidth. PCB layout should preserve a low-noise ground reference and short feedback paths so that connector and switching-supply disturbances do not dominate the small signals produced by portable sensors.

⚡

ADC Input Driver

OPA337UA can serve as an ADC driver when the target converter needs gain, level translation, or isolation from a high-impedance sensor. The 3 MHz gain-bandwidth product supports many moderate-speed acquisition paths, and the rail-to-rail output provides flexibility when the ADC input range extends near a 5 V supply rail. Confirm the ADC's input range, sampling rate, settling requirements, and kickback behavior before setting the amplifier gain. The feedback network should be placed close to the amplifier pins, and the output route to the ADC should avoid crossing digital return currents. Decoupling and output isolation are especially important when the converter contains a sampling capacitor because the resulting switching transients can otherwise disturb the signal and distort conversion results.

🌐

RS-232 Interface Support

OPA337UA can support low-voltage interface circuitry around a modern RS-232 transceiver, particularly where a small-signal level shift, receiver conditioning, or auxiliary amplifier function is required. The device's 3 MHz bandwidth is substantially above the signaling rate of a conventional serial interface, and its rail-to-rail output can operate from a 5 V-oriented supply. It does not replace the RS-232 line driver or protection network; it should be used only where the specific interface architecture calls for it. Verify the transceiver's supply rating, input thresholds, and logic levels, and confirm the amplifier's output swing and slew rate against the intended data rate. Keep the amplifier away from the high-energy line-side interface network to minimize surge-related coupling into sensitive control circuitry.

🏭

Industrial Control and Monitoring

OPA337UA fits compact industrial monitoring blocks where a controller requires a buffered analog command or measurement signal. Its CMOS implementation, 5.5 V maximum supply capability, and 3 MHz gain-bandwidth product allow operation in low-voltage embedded control systems. The amplifier can buffer a sensor output, scale a potentiometer signal, or provide local gain before an ADC input. Because industrial environments can contain fast switching equipment, the design should minimize loop area and keep sensitive analog traces away from motor and relay return paths. Confirm the operating temperature range, noise performance, and output behavior under the required load before production use. A solid ground reference, local bypass capacitance, and conservative output loading are essential for maintaining predictable behavior in a control enclosure.

🔧

Compact Analog Signal Buffer

OPA337UA is useful as a compact unity-gain or moderate-gain buffer when a high-impedance source cannot directly drive the following stage. The single-amplifier configuration minimizes component count, while the 3 MHz bandwidth provides margin for low-frequency and moderate-bandwidth precision signals. The rail-to-rail output can improve usable signal range in low-voltage systems, although the actual output swing under load must be confirmed from the datasheet. Place the amplifier near the source or load being buffered to avoid long high-impedance traces that increase noise pickup. Check bias-current error, offset voltage, capacitive-load behavior, and stability at the intended closed-loop gain before finalizing the circuit, particularly when driving sampling inputs, long cables, or unusually large capacitances.

What are the key specifications of OPA337UA that engineers should know?
OPA337UA is a single-channel, 5.5 V maximum, 3 MHz CMOS operational amplifier with rail-to-rail output and an 8-pin SOIC package. According to the Texas Instruments OPA337 product page, it belongs to the MicroAmplifier series and uses advanced CMOS technology for low-cost, miniature applications. The 3 MHz gain-bandwidth product is suitable for moderate-frequency signal conditioning, while the rail-to-rail output provides improved output headroom in low-voltage systems.
Where can I download the OPA337UA datasheet PDF?
The official OPA337UA datasheet can be obtained through the Texas Instruments OPA337 product page at https://www.ti.com/product/OPA337. The ordering-information section identifies OPA337UA as the single, 5.5 V, 3 MHz, rail-to-rail-output device in an 8-pin SOIC package. Use the manufacturer datasheet for the complete pin-description table, recommended operating conditions, electrical characteristics, and application guidance before releasing the design.
Where can I find the OPA337UA pinout?
Use the pin-description table in the Texas Instruments OPA337 datasheet and compare it with the package drawing for the selected OPA337UA ordering option. The verified ordering information identifies OPA337UA as an 8-pin SOIC device. The public product information does not reproduce every pin name, so the manufacturer pin table should be treated as the authoritative source for input, output, supply, and ground connections.
What is the operating voltage of OPA337UA?
OPA337UA is identified by Texas Instruments as a single amplifier with a maximum supply voltage of 5.5 V. According to the TI product page, the OPA337 family uses advanced CMOS technology and is intended for low-voltage, miniature applications. The complete minimum and maximum supply limits, common-mode range, and output-swing limits must be checked in the manufacturer datasheet for the exact operating condition and temperature range.
Is OPA337UA suitable for ADC signal conditioning?
OPA337UA is suitable for many low-voltage ADC signal-conditioning stages because it combines a 3 MHz gain-bandwidth product with rail-to-rail output operation. According to the TI OPA337 product page, the device is a CMOS MicroAmplifier-series operational amplifier designed for miniature applications. Confirm that the ADC input range, required gain, settling time, input common-mode range, and output drive match the selected ADC before using the amplifier.
What can replace OPA337UA on the same 8-pin SOIC footprint?
The closest documented replacements are OPA338UA, OPA336UA, TLV2371, and MCP6001, but each requires a detailed electrical review. OPA338UA and OPA336UA are same-family choices, while TLV2371 and MCP6001 are cross-brand candidates identified by cross-reference listings. A valid drop-in decision requires matching the SOIC-8 pin assignment, supply range, common-mode range, output swing, bandwidth, stability, and required accuracy.
Is OPA337UA the same as OPA338UA?
OPA337UA and OPA338UA are related single CMOS amplifiers in the same TI family and can use the same 8-pin SOIC footprint, but they are not necessarily identical in every electrical characteristic. The manufacturer describes both OPA337 and OPA338 as rail-to-rail-output devices in the MicroAmplifier series. Confirm offset voltage, bias current, noise, slew rate, common-mode behavior, and shutdown or enable functions in the respective datasheets before substitution.
OPA337UA vs OPA336UA: which is better for precision analog signals?
OPA337UA is the better starting point when the design specifically requires the confirmed 3 MHz gain-bandwidth product and 5.5 V maximum supply rating of the OPA337 family. OPA336UA is a related TI amplifier that may suit lower-bandwidth precision applications, but the public listing does not provide enough comparative electrical data to declare a universal winner. Compare input offset, bias current, noise density, output swing, and stability for the actual gain and load.
OPA337UA vs TLV2371: which is better for a low-voltage design?
OPA337UA is preferable when its 3 MHz gain-bandwidth product and 5.5 V maximum supply voltage are the required published characteristics. TLV2371 is a documented cross-brand candidate, but its complete input range, offset, noise, output-swing, and stability behavior must be verified from its manufacturer datasheet. The correct choice depends on the required gain, signal bandwidth, supply voltage, accuracy, and pin-compatible operating limits.
When should I choose OPA337UA over OPA338UA?
Choose OPA337UA when the design is specified around the OPA337 family's confirmed 3 MHz bandwidth, 5.5 V maximum supply capability, and rail-to-rail output. Choose OPA338UA when it provides a specifically required function or electrical characteristic from that part's datasheet while maintaining the same SOIC-8 footprint. The final decision should be based on full parameter matching rather than family name or package similarity alone.
Is OPA337UA suitable for portable and low-voltage equipment?
OPA337UA is suitable for portable equipment when its 5.5 V maximum supply voltage and 3 MHz bandwidth satisfy the circuit requirements. The TI product page positions the OPA337 series for low-cost and miniature applications. Confirm quiescent current and output drive in the datasheet because those values were not present in the accessible product summary, then verify startup behavior and supply sequencing for the complete device.
How should OPA337UA be decoupled and laid out on a PCB?
Place the required supply-decoupling capacitors close to the OPA337UA supply and ground pins, and keep the input and output routing short to reduce parasitic coupling. The manufacturer datasheet should control the capacitor values, placement, and any stability recommendations. Use a quiet ground path for sensitive analog signals and avoid routing the amplifier directly beside high-current switching nodes when noise-sensitive measurements are required.
Does OPA337UA require a heatsink?
OPA337UA normally does not require a dedicated heatsink in low-voltage, low-power signal-conditioning applications because its maximum supply voltage is only 5.5 V. Actual dissipation depends on supply voltage, output swing, load current, and ambient temperature. Confirm the thermal resistance and maximum junction temperature in the manufacturer datasheet, and provide normal PCB copper for temperature spreading when operating near the upper temperature limit.
What is the lifecycle status of OPA337UA?
OPA337UA is currently presented as an orderable Texas Instruments product with current manufacturer and distributor product references. The accessible product information does not display a specific lifecycle-status statement, so procurement teams should confirm current ordering status directly through the Request a Quote form on this page. Package, lead time, and availability can change and should be reconfirmed before production release.
Where to buy OPA337UA online and what is its lead time?
Use the Request a Quote form on this page to request OPA337UA pricing, stock, minimum order quantity, and production lead time from XAIPART. Current supply conditions should be confirmed at the time of quotation rather than inferred from an old catalog record. The orderable configuration is the Texas Instruments OPA337UA in an 8-pin SOIC package, and the requested shipment configuration can be stated with the RFQ.

Engineering reference data for OPA337UA — comparison, design guidance, and compliance information.

Selection Guide

Choose OPA337UA when the design needs one CMOS amplifier with a 5.5 V maximum supply, a 3 MHz gain-bandwidth product, rail-to-rail output, and an 8-pin SOIC footprint. Select OPA338UA when a requirement from that related TI family is confirmed and the complete electrical tables remain acceptable. Select OPA336UA when its lower-bandwidth precision characteristics better match the sensor, but verify its input and output limits before changing the BOM. TLV2371 can be considered for a same-manufacturer SOIC-8 design after checking its supply range, common-mode range, bandwidth, and output swing. MCP6001 is a cross-brand option when its lower bandwidth is still sufficient and its noise, offset, bias-current, and stability characteristics satisfy the circuit. For every option, treat footprint compatibility as only the first gate; verify the exact pin assignment and application-critical electrical limits before production release.

Comparison with Alternatives

Parameter This Product OPA338UA OPA336UA TLV2371 MCP6001
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Application Class General-purpose precision signal conditioning General-purpose CMOS signal conditioning Precision CMOS signal conditioning Low-voltage operational amplification Low-voltage CMOS operational amplification
SOA Not applicable Not applicable Not applicable Not applicable Not applicable

Key Differentiators

  • Confirmed 3 MHz bandwidth in the selected OPA337 family configuration (vs MCP6001)
  • Single-supply operation with a 5.5 V maximum rating (vs TLV2371)
  • Rail-to-rail output confirmed for the OPA337 and OPA338 series (vs OPA336UA)
  • Same-manufacturer MicroAmplifier family alignment (vs MCP6001)

Design Notes

Place the manufacturer-recommended bypass capacitors directly beside the OPA337UA supply and ground pins. Keep feedback resistors and their associated traces close to the amplifier to minimize parasitic capacitance and reduce susceptibility to EMI. For sensor or ADC interfaces, route the sensitive input directly to the relevant pin and avoid sharing narrow return paths with switching converters, relay coils, or digital processor outputs.

Validate stability with the actual source impedance, gain setting, output load, and PCB capacitance. OPA337UA's 3 MHz gain-bandwidth product is suitable for many moderate-frequency paths, but the complete datasheet must be used to select gain and isolation components. If the amplifier drives an ADC sampling input or a capacitive cable, place a small isolation resistor at the output and verify settling and overshoot with the intended load.

Do not assume that every SOIC-8 amplifier is pin-compatible with OPA337UA. Check the package drawing, pin names, input configuration, supply pins, and enable or shutdown functions for every proposed replacement. Also confirm that the alternative's input common-mode range covers the sensor or source voltage and that its output can reach the required load level within the 5.5 V maximum supply condition.

OPA337UA's low 5.5 V maximum supply normally limits internal dissipation in ordinary signal-conditioning circuits, but the exact calculation depends on output voltage, load current, quiescent current, and package thermal resistance. Use the manufacturer power-dissipation equation with the worst-case supply and output states. Provide continuous copper around the SOIC footprint and avoid enclosing the device in a thermally isolated location when it operates near its maximum rated ambient temperature.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The accessible manufacturer and distributor product information does not state a target-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration. AEC-Q100 qualification is not indicated and is not applicable unless the exact ordered configuration is separately qualified.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

OPA337UA datasheet OPA337UA datasheet pdf OPA337UA pinout OPA337UA SOIC-8 OPA337UA 3MHz amplifier OPA337UA 5.5V Texas Instruments OPA337UA OPA337UA equivalent OPA337UA replacement OPA337UA vs OPA338UA OPA337UA price OPA337UA stock

Related Components & Terms

Texas Instruments OPA337UA OPA337 OPA338UA OPA336UA TLV2371 MCP6001 MicroAmplifier series Operational amplifier CMOS operational amplifier Linear amplifier Voltage amplifier Analog signal-conditioning IC Semiconductor Rail-to-rail output MicroAmplifier 8-pin SOIC SOIC family Surface-mount package SMD 3 MHz gain-bandwidth product 5.5 V maximum supply voltage Input common-mode range Input offset voltage Input bias current ADC signal conditioning Sensor interface Portable instrumentation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details