Texas Instruments

OPA657UB - 1.6GHz Low-Noise FET Op Amp | Texas Instruments

MPN: OPA657UB ✓ Active
10 V to 12 V Vdss 8-pin SOIC Package
MOQ: 1 |

OPA657UB Overview

The Texas Instruments OPA657UB is a single-channel, low-noise, FET-input operational amplifier with a 1.6 GHz gain-bandwidth product, supplied in an 8-pin SOIC package. It is designed for precision and wideband signal chains that require low input noise, high bandwidth, and low distortion. The OPA657UB is associated with a -40°C to +85°C temperature range and operates from the 10 V to 12 V supply range identified for this device.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. The FET-input architecture places a low-voltage-noise JFET input stage ahead of the high-gain, voltage-feedback amplifier. This combination makes the OPA657UB useful where a low-noise input stage, wide signal bandwidth, and high dynamic range must coexist in a compact analog circuit.

The principal performance features of the OPA657UB include its 1.6 GHz gain-bandwidth product, FET input stage, and 700 V/µs slew rate. Its decompensated architecture is particularly relevant to precision ADC driving and wideband transimpedance amplifiers because it supports high-speed operation without requiring a conventional unity-gain stability trade-off. The device is offered in an 8-pin SOIC package for surface-mount assembly.

The OPA657 combines a high-gain-bandwidth voltage-feedback core with a low-voltage-noise JFET input stage. This arrangement supports instrumentation applications in which input-referred noise can limit the usable dynamic range even when the selected ADC or detector has adequate resolution. The decompensated design also allows the amplifier to retain useful bandwidth in applications that normally require higher closed-loop gain.

Typical uses include photodiode and optical-sensor signal chains, precision ADC input amplifiers, high-impedance instrumentation, wideband active filters, and communications or test equipment. In a transimpedance stage, the FET inputs help reduce current-related noise while the 1.6 GHz bandwidth supports fast detector signals. In an ADC driver, the wide bandwidth and 700 V/µs slew rate help preserve large-signal fidelity when driving the converter input.

PCB design should prioritize short feedback paths, low-leakage-area layouts, and clean return-current routing around the high-impedance input stage. Decoupling capacitors should be placed close to the supply pins, while sensitive input traces should remain physically separated from output and slew-rate-current paths. The complete pin assignments and recommended application circuits should be taken directly from the Texas Instruments datasheet.

This product page combines the OPA657UB manufacturer specifications, verified ordering information, package details, drop-in candidate evaluation, comparison criteria, and application-focused design guidance. It is intended to support engineering selection while clearly separating documented device characteristics from parameters that require additional design confirmation.

Drop-in alternatives for OPA657UB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with OPA657UB (same form factor and footprint) — differing in Amplifier Type, Input Stage, Package.

Texas Instruments
Amplifier Type: High-speed low-noise operational amplifier
Input Stage: Low-noise FET/JFET input
Package: 8-pin SOIC (D)
Compare with OPA657UB →

OPA657U

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Voltage-feedback operational amplifier · 1 amplifier · 1.6 GHz · 350 MHz · 700 V/µs · Low-noise FET/JFET input · 10 V to 12 V · -40°C to +85°C

Contact for price

View Datasheet →

OPA657UG4

✅ Drop-In
📦 8-pin SOIC
Same OPA657 family, 1.6 GHz bandwidth, and 8-pin SOIC footprint; ordering-code qualification and temperature grade differ.

📋 Reference alternative (not in catalog)

OPA657UID

✅ Drop-In ⚠️ Specs Unverified
📦 8-pin SOIC
Same OPA657 family and 1.6 GHz bandwidth in an 8-pin SOIC package; suffix-based temperature and qualification conditions require comparison.

📋 Reference alternative (not in catalog)

OPA657UB Maximum Ratings & Electrical Characteristics

Amplifier Type Single voltage-feedback operational amplifier
Number of Channels 1 channel
Input Stage Low-voltage-noise FET/JFET input
Gain-Bandwidth Product 1.6 GHz
Slew Rate 700 V/µs
Supply Voltage Range 10 V to 12 V
Architecture Decompensated voltage-feedback amplifier
Package 8-pin SOIC
Package Code D
Operating Temperature Range -40°C to +85°C
Mounting Type Surface mount
Primary Application High-precision ADC driving and wideband transimpedance amplification

OPA657UB Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected (per datasheet)
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — Not connected (per datasheet)
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected (per datasheet)

Typical Applications

OPA657UB is suitable for 6 applications: High-Speed Precision ADC Driver, Photodiode Transimpedance Amplifier, Wideband Active Filter, High-Impedance Instrumentation Amplifier, Communications Signal Conditioning, Optical Sensor Readout.

📈

High-Speed Precision ADC Driver

The OPA657UB fits high-speed ADC input stages because its 1.6 GHz gain-bandwidth product and 700 V/µs slew rate preserve large-signal movement when the converter input presents a difficult capacitive or resistive load. According to the Texas Instruments manufacturer datasheet, the low-voltage-noise FET/JFET input stage also supports high-dynamic-range acquisition rather than merely providing bandwidth. The amplifier is placed directly before the ADC input, with the feedback network kept short and the output routed away from sensitive input nodes. Verify the ADC's input range, settling requirements, kickback behavior, and operating gain against the amplifier's decompensated stability characteristics before production release.

📷

Photodiode Transimpedance Amplifier

The OPA657UB is well suited to wideband photodiode amplification because the low-voltage-noise JFET input stage limits the amplifier's own input-noise contribution while the 1.6 GHz bandwidth supports rapidly varying detector signals. In a transimpedance topology, the OPA657UB converts photocurrent into a proportional output voltage, with feedback resistance and compensation capacitance setting the usable response. According to the Texas Instruments manufacturer datasheet, the decompensated architecture is intended for this use. Keep the summing node physically small, use low-leakage construction around the input, and verify the combined photodiode capacitance, feedback capacitance, and target gain against the amplifier stability requirements.

📡

Wideband Active Filter

The OPA657UB can implement wideband active filtering where the required closed-loop bandwidth approaches the limits imposed by conventional voltage-feedback amplifiers. Its 1.6 GHz gain-bandwidth product and 700 V/µs slew rate provide the transition bandwidth and large-signal response needed in high-order filters, while the FET input stage helps preserve low-noise operation. According to the Texas Instruments manufacturer datasheet, the device is a decompensated voltage-feedback amplifier and therefore requires stability analysis at the selected noise gain. Component tolerances, parasitic capacitance, output loading, and the filter's actual gain should be included in simulation before fabrication.

🏭

High-Impedance Instrumentation Amplifier

The OPA657UB suits precision instrumentation stages in which source impedance is high and the amplifier must contribute little input current or noise. According to the Texas Instruments manufacturer datasheet, the low-voltage-noise JFET input stage supports very high dynamic range, while the 1.6 GHz gain-bandwidth product provides more bandwidth than many general-purpose precision amplifiers. The device can amplify sensor or laboratory signals before digitization, particularly when source capacitance is modest and rise time must be preserved. Use guarding, clean connectors, and controlled board contamination to prevent leakage and surface leakage from overwhelming the signal, and confirm bias-current behavior at the highest operating temperature.

🌐

Communications Signal Conditioning

The OPA657UB can condition high-rate communications signals when the receiver chain requires low input noise, rapid slew, and accurate large-signal reproduction. Its 1.6 GHz gain-bandwidth product and 700 V/µs slew rate support wideband gain blocks, while the FET input stage helps avoid adding excessive input-referred noise to the receiver. According to the Texas Instruments manufacturer datasheet, the amplifier is designed for high dynamic range. Place input and feedback paths away from clocks, Ethernet interfaces, switching supplies, and other high-slew-current nodes. Confirm the required gain, output loading, channel-isolation behavior, and frequency-dependent distortion against the complete communications link budget.

🔭

Optical Sensor Readout

The OPA657UB is applicable to optical sensor readouts where a weak detector signal must be amplified without introducing excessive broadband noise. The low-voltage-noise FET/JFET input stage and 1.6 GHz bandwidth provide a useful combination for photodiode, optical receiver, and laboratory detector front ends. According to the Texas Instruments manufacturer datasheet, the amplifier is intended for wideband transimpedance applications, making it suitable when detector output must be captured rapidly. Keep the input node compact and isolate it from humid surfaces, contamination, and switching nodes. Calculate the transimpedance gain from the required detector current and output swing, then validate the complete stability and noise response with the actual sensor capacitance.

Recommended Products Summary

OPA657U Texas Instruments Used in: High-Speed Precision ADC Driver, Wideband Active Filter, Communications Signal Conditioning, Optical Sensor Readout OPA656UG4 Wideband amplifier candidate requiring stability verification Used in: High-Speed Precision ADC Driver, Wideband Active Filter, Optical Sensor Readout OPA657UG4 Same-family FET-input amplifier for transimpedance designs Used in: Photodiode Transimpedance Amplifier, High-Impedance Instrumentation Amplifier OPA657UID Same-family 8-pin SOIC alternative Used in: Photodiode Transimpedance Amplifier, Communications Signal Conditioning INA149AIDR Texas Instruments Used in: High-Impedance Instrumentation Amplifier
What is the OPA657UB?
The OPA657UB is a single-channel, low-noise, FET-input voltage-feedback operational amplifier with a 1.6 GHz gain-bandwidth product. According to the Texas Instruments manufacturer datasheet, it combines a high-gain-bandwidth core with a low-voltage-noise JFET input stage and is intended for high-precision ADC driving, wideband transimpedance amplification, and other demanding high-impedance signal chains. The specified package is an 8-pin SOIC.
What are the key specifications of OPA657UB that engineers should know?
The OPA657UB combines a 1.6 GHz gain-bandwidth product, a low-noise FET/JFET input stage, a 700 V/µs slew rate, a 10 V to 12 V supply range, and an 8-pin SOIC package. According to the Texas Instruments manufacturer datasheet, its decompensated architecture is intended to provide high bandwidth for ADC drivers, photodiode amplifiers, and wideband transimpedance circuits. Its identified operating-temperature range is -40°C to +85°C.
Where can I download the OPA657UB datasheet PDF?
The official OPA657UB datasheet PDF is available from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/opa657.pdf. It contains the authoritative electrical characteristics, pin configuration, typical performance curves, and application circuits. Use the manufacturer document for PCB assignments and design values rather than relying on a distributor copy or third-party transcription.
Where can I find the OPA657UB pinout?
The OPA657UB pin configuration is shown in the Texas Instruments manufacturer datasheet at https://www.ti.com/lit/ds/symlink/opa657.pdf. The device uses an 8-pin SOIC: pins 2 and 3 are the inverting and non-inverting inputs, pins 7 and 4 are the positive and negative supply connections, pin 6 is the output, and pins 1, 5, and 8 are not connected. Follow the package drawing when assigning PCB tracks.
Is OPA657UB suitable for precision ADC driving?
Yes, the OPA657UB is specifically suited to high-precision ADC driving. According to the Texas Instruments manufacturer datasheet, its 1.6 GHz gain-bandwidth product, 700 V/µs slew rate, low-voltage-noise JFET input stage, and decompensated architecture support accurate high-speed amplification. Input and output common-mode limits, settling behavior, and ADC drive requirements should still be checked against the individual converter interface.
Is OPA657UB suitable for photodiode and transimpedance amplification?
Yes, the OPA657UB is appropriate for wideband transimpedance and photodiode signal chains. According to the Texas Instruments manufacturer datasheet, the low-voltage-noise JFET input stage reduces the input-noise contribution while the 1.6 GHz bandwidth supports fast detector signals. Keep the summing-node layout compact, protect the input from contamination, and verify total input capacitance against the selected feedback network and stability requirements.
OPA657UB vs OPA657U - which is better for an industrial design?
The OPA657UB and OPA657U are both identified as 8-pin SOIC versions of the OPA657, but the ordering-temperature codes must be matched to the product's qualification and environmental requirements. The OPA657UB part-details listing identifies a -40°C to +85°C range. According to Texas Instruments ordering documentation, select the exact OPA657 ordering option whose temperature grade, package, and qualification status satisfy the production environment.
OPA657UB vs OPA656UG4 - can the OPA656UG4 replace it?
The OPA656UG4 should not be treated as an automatic OPA657UB replacement without a complete stability and transfer-function review. Both devices appear in comparisons of the OPA657 family, but their gain-bandwidth, noise, stability, and compensation characteristics determine suitability in a decompensated transimpedance or ADC-driver circuit. The OPA657UB remains the preferred selection when its documented 1.6 GHz performance is required.
When should I choose OPA657UB over a lower-bandwidth amplifier?
Choose the OPA657UB when the signal path requires the combination of a 1.6 GHz gain-bandwidth product, a low-noise FET input stage, and a 700 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, it is particularly useful for precision ADC input stages and wideband transimpedance amplifiers. A lower-bandwidth amplifier is appropriate only when the required signal bandwidth, settling time, input-noise contribution, and stability margins are less demanding.
When should I choose OPA657UB over OPA657UG4?
Choose the OPA657UB when its identified -40°C to +85°C operating range and standard SOIC ordering code match the product requirements. The OPA657UG4 is an alternate TI ordering option appearing in family comparison data, but its exact electrical grade and qualification status should be checked against the current manufacturer datasheet and ordering table. Match the suffix, temperature range, package, and qualification requirements before release.
What can replace OPA657UB?
The closest directly documented candidates are the OPA657U and OPA657UG4 in the same 8-pin SOIC family, while the OPA657UID is another same-family ordering option listed by Texas Instruments. A valid replacement must preserve the SOIC pinout, supply range, input architecture, decompensated stability behavior, and required bandwidth. Confirm the exact suffix and electrical characteristics in the manufacturer datasheet before substituting any candidate.
Is OPA657UB the same as OPA657U?
The OPA657UB and OPA657U belong to the same OPA657 family and are both listed with an 8-pin SOIC package, but their ordering suffixes can encode different temperature or grade conditions. The OPA657UB part-details listing identifies a -40°C to +85°C operating range. According to Texas Instruments ordering information, verify the complete suffix and temperature specifications before treating the two orderable parts as interchangeable.
Where to buy OPA657UB online?
Use the Request a Quote form on this page to request OPA657UB availability, order quantities, and delivery information. The exact 8-pin SOIC ordering code is OPA657UB, and the manufacturer part-details page identifies it as a single operational amplifier in an 8-pin SOIC package. Purchase decisions should include the required quantity, delivery schedule, and traceable manufacturer packaging.
What is the price of OPA657UB?
Use the Request a Quote form on this page for the current OPA657UB price and quantity availability. The part is offered as the standard 8-pin SOIC ordering code with a -40°C to +85°C operating range. A quotation can also confirm manufacturer packaging, minimum order quantity, production allocation, and the lead time associated with the requested quantity.
What is the lead time for OPA657UB and is it in stock?
Request current OPA657UB stock, lead time, and minimum-order information through the Request a Quote form on this page. Stock availability can change with order quantity and manufacturer production conditions, so a live quotation is the appropriate source for a purchasing decision. For technical screening, confirm that the quoted part remains OPA657UB in the 8-pin SOIC package.

Engineering reference data for OPA657UB — comparison, design guidance, and compliance information.

Selection Guide

Select the OPA657UB when a design needs a low-noise FET/JFET input stage, a 1.6 GHz gain-bandwidth product, and a 700 V/µs slew rate in an 8-pin SOIC package. It is particularly appropriate for precision ADC drivers, photodiode amplifiers, and wideband transimpedance stages where source noise and settling behavior materially affect signal integrity. The OPA657U is the closest same-family ordering alternative when its exact temperature and qualification codes satisfy the application; it retains the 1.6 GHz performance class and SOIC footprint. OPA657UG4 can also reuse the footprint, but its ordering grade should be checked before substitution. OPA657UID offers another same-family SOIC sourcing path, with suffix-based conditions governing suitability. For any replacement, verify the pinout, minimum stable gain, supply range, input noise, bias current, and worst-case phase margin rather than relying on package and bandwidth alone.

Comparison with Alternatives

Parameter This Product OPA657U OPA657UG4 OPA657UID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Type Voltage-feedback operational amplifier Voltage-feedback operational amplifier Voltage-feedback operational amplifier Voltage-feedback operational amplifier
Number of Channels 1 channel 1 channel 1 channel 1 channel
Input Stage Low-voltage-noise FET/JFET input Low-voltage-noise FET/JFET input Low-voltage-noise FET/JFET input Low-voltage-noise FET/JFET input
Gain-Bandwidth Product 1.6 GHz 1.6 GHz 1.6 GHz 1.6 GHz
Slew Rate 700 V/µs 700 V/µs 700 V/µs 700 V/µs
Supply Voltage Range 10 V to 12 V 10 V to 12 V 10 V to 12 V 10 V to 12 V
Primary Application High-precision ADC driving and wideband transimpedance amplification High-precision ADC driving and wideband transimpedance amplification High-precision ADC driving and wideband transimpedance amplification High-precision ADC driving and wideband transimpedance amplification

Key Differentiators

  • Combines 1.6 GHz bandwidth with a low-noise FET input stage (vs OPA657U)
  • Pin-compatible same-family option (vs OPA657UG4)
  • Direct 8-pin SOIC upgrade path (vs OPA657UID)

Design Notes

Place the input, feedback, and output-loop components close to the OPA657UB. Keep the inverting-input summing node compact, especially in transimpedance circuits, because parasitic capacitance and board leakage can alter stability and input bias behavior. Route high-speed output current away from the non-inverting input, use a continuous ground reference, and avoid placing test pads or long unprotected input traces adjacent to the sensitive input.

Use the supply range identified for the OPA657UB and place local high-frequency decoupling directly across the V+ and V- pins. The amplifier's 700 V/µs slew rate can produce fast output transitions, making supply-return coupling possible even though the input stage is low noise. Verify positive and negative supply sequencing, output swing, and load current against the manufacturer operating limits before connecting it to a sensitive converter or detector.

Do not assume conventional unity-gain stability because the OPA657UB uses a decompensated architecture. Confirm the minimum stable gain, allowable noise gain, source and load capacitance, and feedback-network impedance using the manufacturer stability and application information. A board that works at one supply voltage may not retain adequate phase margin across temperature, load, and component tolerance, so validate the worst-case network rather than only the nominal simulation.

Control leakage around the FET/JFET input stage by using clean PCB materials, conformal protection where environmental exposure is expected, and guard structures driven only as permitted by the circuit design. Avoid flux residue, fingerprints, moisture, and long exposed copper near the input. In optical and photodiode applications, place the amplifier close to the detector to minimize parasitic capacitance and leakage before the signal enters the summing node.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code. The OPA657UB is an industrial-temperature amplifier ordering option rather than an explicitly identified automotive-qualified variant.

Related Searches

OPA657UB datasheet OPA657UB datasheet pdf OPA657UB pinout OPA657UB specifications OPA657UB SOIC-8 OPA657UB 1.6GHz op amp Texas Instruments OPA657UB OPA657UB ADC driver OPA657UB transimpedance amplifier OPA657UB replacement OPA657UB vs OPA657U OPA657UB equivalent OPA657UB price OPA657UB stock

Related Components & Terms

Texas Instruments OPA657UB OPA657U OPA657UG4 OPA657UID OPA656UG4 operational amplifier voltage-feedback amplifier amplifier IC semiconductor low-dropout regulator FET-input operational amplifier JFET input stage gain-bandwidth product slew rate input voltage noise transimpedance amplifier precision ADC driver photodiode decompensated amplifier SOIC-8 QFN family surface mount SMD RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details