Texas Instruments

PCM1604Y/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments

MPN: PCM1604Y/2K ✓ Active
48-pin LFQFP Package
MOQ: 1 |

PCM1604Y/2K Overview

The Texas Instruments PCM1604Y/2K is a 24-bit, 6-channel enhanced multilevel delta-sigma digital-to-analog converter designed for high-fidelity multichannel audio. It supports sampling rates up to 192 kHz and is packaged in a 48-pin LQFP measuring 7 mm by 7 mm. The converter provides a typical dynamic range of 105 dB, typical signal-to-noise ratio of 104 dB, and typical total harmonic distortion plus noise of 0.0018%.

A digital-to-analog converter, or DAC, converts digital audio samples into proportional analog voltages or currents. A multi-channel DAC supports several independent audio outputs within one package, reducing the component count required for surround-sound, active-speaker, professional-audio, and multimedia systems. Within the broader hierarchy, this device is an audio DAC, an analog and mixed-signal data-conversion IC, and a semiconductor used in professional audio and consumer electronics.

The PCM1604Y/2K provides six DAC channels with 24-bit resolution and a maximum sampling frequency of 192 kHz. Its enhanced multilevel delta-sigma architecture is intended to combine high-resolution reconstruction with a compact integrated audio-conversion solution. Typical performance includes 105 dB dynamic range, 104 dB SNR, and 0.0018% THD+N, making the device relevant to designs where low distortion and broad dynamic range influence audibility, headroom, or signal-chain fidelity.

The converter is implemented in CMOS and uses a gull-wing, square 48-pin LFQFP package. The 7 mm by 7 mm LQFP footprint provides accessible leads for conventional PCB assembly and inspection. Because this is a multichannel analog output device, PCB implementation must account for clean supply distribution, a stable analog ground reference, correct output-filter implementation, and separation between digital clock and data signals and sensitive analog output nodes.

Typical uses include home-theater surround-sound systems, powered loudspeakers, professional mixing consoles, multichannel audio interfaces, digital mixing desks, and active speaker crossover networks. Six integrated channels can also simplify channel-balanced designs compared with discrete single-channel converters. System designers should still verify the required interface mode, digital audio format, output topology, sampling rate, and external filter characteristics against the manufacturer datasheet before finalizing the circuit.

The primary design consideration is maintaining clean reference and analog-output behavior. Follow the manufacturer pin-description table when assigning every LQFP lead, and implement the specified analog and digital supply connections and decoupling arrangement. Keep sensitive analog traces short, maintain a continuous ground reference, and place output-network components close to their associated converter pins where the reference circuit permits.

This page combines technical specifications, application guidance, practical design considerations, package details, and drop-in replacement analysis in a compact engineering reference. It is intended to help designers evaluate the PCM1604Y/2K for multichannel audio systems while also identifying where an alternative offers a meaningful functional or packaging difference.

Drop-in alternatives for PCM1604Y/2K — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PCM1604Y/2K (same form factor and footprint) — differing in Converter Type, Package, Resolution, Dynamic Range, Maximum Sampling Rate.

Texas Instruments
Converter Type: 24-bit enhanced multilevel delta-sigma DAC
Package: 48-pin LQFP
Maximum Sampling Rate: 96 kHz
Texas Instruments
Package: 48-LQFP, 7 mm × 7 mm
Dynamic Range: 105 dB
Texas Instruments
Converter Type: Digital-to-analog converter
Package: 48-LQFP (7x7 mm)
Resolution: 24 bit

PCM1604Y/2KG4

✅ Drop-In
📦 48-LQFP
Same PCM1604 family and 48-LQFP terminal arrangement; ordering-grade suffix differs by 0% in stated channel count, resolution, and sampling rate

📋 Reference alternative (not in catalog)

PCM1604Y

✅ Drop-In
Texas Instruments
📦 48-LQFP
Digital-to-analog converter · Enhanced multilevel delta-sigma · 24 bit · 192 kHz · 6 channels · I2S · 48-LQFP (7x7 mm) · 48 terminals

Contact for price

View Datasheet →

PCM1604Y/2K Maximum Ratings & Electrical Characteristics

Converter Type 24-bit 6-channel enhanced multilevel delta-sigma DAC
Number of Channels 6 channels
Resolution 24 bits
Maximum Sampling Rate 192 kHz
Dynamic Range 105 dB typical
Signal-to-Noise Ratio 104 dB typical
Total Harmonic Distortion plus Noise 0.0018% typical
Technology CMOS
Package Type 48-pin LFQFP
Package Dimensions 7 mm x 7 mm
Terminal Count 48 terminals
Terminal Form Gull wing
Package Shape Square
Mounting Type Surface mount
Digital Audio Interface I2S

PCM1604Y/2K square Pin Configuration Guide

Pin configuration for PCM1604Y/2K (square package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

square package pinout diagram for PCM1604Y/2K

No detailed pinout data available for PCM1604Y/2K.

Refer to the datasheet for full pin configuration.

Typical Applications

PCM1604Y/2K is suitable for 6 applications: Home-Theater Surround-Sound Receiver, Powered Multichannel Speaker, Professional Digital Mixer, Multichannel Audio Interface, Digital Loudspeaker Crossover, Digital Recording and Playback System.

📺

Home-Theater Surround-Sound Receiver

The PCM1604Y/2K fits a multichannel surround-sound receiver requiring six synchronized analog audio outputs. Its 24-bit conversion resolution and 192 kHz maximum sampling rate support high-resolution source formats, while typical dynamic range of 105 dB and SNR of 104 dB provide useful channel-to-channel headroom. Place the converter near the output filtering and analog ground reference, keep digital clock and data routing away from the analog outputs, and verify the supported digital interface before laying out the receiver PCB.

🎧

Powered Multichannel Speaker

A powered speaker can use the PCM1604Y/2K to convert six digital audio channels into low-distortion analog signals before amplification. The converter's 0.0018% typical THD+N and 104 dB typical SNR help preserve signal quality through the digital-to-analog stage, while its 48-LQFP package integrates multiple channels without requiring six separate converter packages. The design must provide a clean reference, suitable output filters, and short analog routing to maintain channel performance.

🎚️

Professional Digital Mixer

The PCM1604Y/2K is suitable for a digital mixing console requiring multiple high-resolution audio outputs. Its six-channel architecture supports a compact multichannel conversion stage, and the 192 kHz sampling capability provides headroom for professional source material. A mixer implementation should use the manufacturer reference interface, isolate converter clocks from sensitive analog paths, and confirm that the external output network and clock architecture operate correctly at every required sample rate.

🎛️

Multichannel Audio Interface

A multichannel audio interface can employ the PCM1604Y/2K to provide six balanced or single-ended analog outputs derived from a digital audio stream. The 24-bit resolution, 105 dB typical dynamic range, and 104 dB typical SNR align well with converter stages intended to preserve low-level musical detail. Keep the converter close to its output components, maintain a low-impedance analog ground reference, and validate the output level and filter choices against the load.

🔊

Digital Loudspeaker Crossover

The PCM1604Y/2K can form part of a digital loudspeaker crossover that generates separate low-, mid-, and high-frequency channels before amplification. Six outputs allow one converter to support a multiway or multichannel system, while the converter's 192 kHz sampling capability supports high-rate digital crossover processing. The output filters and crossover delays must be coordinated carefully to preserve phase alignment and prevent excessive conversion loss at the selected operating frequencies.

💾

Digital Recording and Playback System

The PCM1604Y/2K is applicable to recording, monitoring, and playback equipment with several synchronized output channels. Its six-channel delta-sigma converter supports 24-bit audio at rates up to 192 kHz, making it relevant to high-resolution studio monitoring and playback designs. System designers should follow the manufacturer clocking and interface guidance, verify converter startup behavior, and implement the specified output and reference-network components for repeatable channel performance.

What is the PCM1604Y/2K?
The PCM1604Y/2K is a Texas Instruments 24-bit, 6-channel enhanced multilevel delta-sigma audio DAC with a maximum sampling rate of 192 kHz. According to the manufacturer datasheet, it uses a 48-pin 7 mm by 7 mm LFQFP package and combines six audio output channels in one device. Its typical dynamic range is 105 dB, while typical SNR is 104 dB and typical THD+N is 0.0018%.
How many channels and bits does PCM1604Y/2K support?
The PCM1604Y/2K provides six DAC channels with 24-bit resolution. According to the Texas Instruments PCM1604 datasheet, the converter is an enhanced multilevel delta-sigma audio DAC intended for multichannel digital audio systems. The six-channel configuration is useful in surround-sound receivers, powered speakers, mixers, and other equipment requiring several synchronized analog audio outputs.
What is the maximum sampling rate of PCM1604Y/2K?
The PCM1604Y/2K supports sampling rates up to 192 kHz. The Mouser product listing identifies the device as a 24-bit, 192 kHz, six-channel enhanced multilevel delta-sigma DAC, while the manufacturer datasheet describes the same 192 kHz-capable converter family. System clocking, supported digital formats, and required external interface components should be checked against the datasheet.
What is the package of PCM1604Y/2K?
The PCM1604Y/2K is packaged in a 48-pin LFQFP with a square body measuring 7 mm by 7 mm and gull-wing leads. Partstack describes the same 48-terminal LFQFP package configuration. Use the manufacturer pin-description table and land pattern when assigning signals, particularly because a 48-pin package also includes power, ground, clock, data, and control connections in addition to the six analog output channels.
Where can I download the PCM1604Y/2K datasheet PDF?
The PCM1604Y/2K datasheet is available through the PCM1604 documentation link on this page. The manufacturer datasheet covers the enhanced multilevel delta-sigma architecture, electrical characteristics, digital interfaces, analog outputs, pin descriptions, and application information. Use the Texas Instruments PCM1604 datasheet for the authoritative operating limits and connection details when creating the production schematic and PCB.
Where is the PCM1604Y/2K pinout?
The PCM1604Y/2K pinout is found in the pin-description table of the Texas Instruments PCM1604 datasheet. The device uses a 48-pin LFQFP with gull-wing leads. Use the exposed package drawing and pin table together because pin numbering follows the physical orientation of the square package. Verify every connection in the final design rather than inferring analog, digital, power, or ground functions from channel order alone.
What are the key specifications of PCM1604Y/2K?
The key PCM1604Y/2K specifications are 24-bit resolution, six channels, 192 kHz maximum sampling, 105 dB typical dynamic range, 104 dB typical SNR, 0.0018% typical THD+N, and a 48-pin 7 mm by 7 mm LFQFP package. These figures come from the manufacturer datasheet and product listings. Supply limits, output configuration, and operating temperature require confirmation from the complete datasheet.
PCM1604Y/2K vs PCM1600Y/2K - which is better for multichannel audio?
The PCM1604Y/2K is generally the better choice when the design specifically requires the PCM1604 feature set and six-channel enhanced multilevel delta-sigma performance. The PCM1600Y/2K is listed as a functionally related 24-bit, 192 kHz, six-channel converter, but its electrical characteristics differ. The cross-reference comparison identifies them as similar rather than proving that every pin and parameter is interchangeable.
When should I choose PCM1604Y/2K over PCM1604Y?
Choose PCM1604Y/2K when the exact ordered device, reel packing, and specified product variant must be maintained for procurement or production continuity. The PCM1604Y listing identifies the broader device family and a 48-LQFP package, while PCM1604Y/2K is the exact ordering code being evaluated. Confirm suffix, grade, packaging, and temperature requirements in the manufacturer ordering information before treating either ordering code as interchangeable.
What can replace PCM1604Y/2K?
PCM1604Y/2KG4 is the closest documented drop-in candidate because it shares the PCM1604 device identity, 48-pin LQFP package, and terminal arrangement. PCM1604Y may be suitable when its grade, packing, and ordering conditions meet the production requirement. Do not substitute PCM1600Y/2K solely from its similar channel count and resolution; verify pin functions, analog outputs, digital timing, and electrical limits in the manufacturer datasheets.
Is PCM1604Y/2KG4 a drop-in replacement for PCM1604Y/2K?
PCM1604Y/2KG4 is a drop-in candidate for PCM1604Y/2K because both use the same 48-pin LQFP device package and terminal arrangement, and the cross-reference data characterizes the replacement as requiring no circuit modification. Before substitution, verify the applicable temperature grade, orderable suffix, lifecycle status, and all electrical characteristics in the manufacturer documentation for the exact production revision.
Is PCM1604Y/2K suitable for home theater and active speakers?
The PCM1604Y/2K is suitable for many home-theater and active-speaker designs requiring six high-fidelity analog audio channels. Its 24-bit resolution, 192 kHz sampling capability, 104 dB typical SNR, and 0.0018% typical THD+N support low-distortion multichannel audio conversion. The power amplifier, output-filter topology, clocking scheme, and analog-ground implementation must be designed around the datasheet reference application.
How should PCM1604Y/2K be placed on a PCB?
Place the PCM1604Y/2K so that analog outputs, associated filters, and supply connections have short paths, while digital clock and data traces remain separated from sensitive analog nodes. Use a continuous ground plane, place decoupling capacitors close to the relevant pins, and follow the manufacturer layout and reference-circuit guidance. The 48-pin LFQFP also requires adequate soldermask and paste control for uniform lead formation.
Where can I buy PCM1604Y/2K and check its lead time?
Use the Request a Quote form on this page to request PCM1604Y/2K availability, current commercial terms, and lead time. The listing indicates that the part is stocked, but stock levels and delivery schedules can change. Provide the required quantity, reel packaging needs, and target date with the request so the supplier can confirm the exact PCM1604Y/2K ordering code.
What is the price of PCM1604Y/2K?
Current commercial terms for PCM1604Y/2K are generated through the Request a Quote form on this page. The structured pricing record tracks quantity-dependent pricing for the exact ordering code, but it should not be treated as a permanent quotation. Submit the required quantity, packaging preference, and delivery location for a current price and availability confirmation.
How much power and thermal design margin does PCM1604Y/2K need?
Use the manufacturer datasheet for the definitive supply current, analog-output power dissipation, and thermal limits. Estimated: dissipated power equals supply voltage times total supply current, less output power delivered to the load. Compare the resulting junction-temperature estimate with the package thermal data and the maximum operating temperature. Actual thermal performance also depends on PCB copper, airflow, ambient temperature, and adjacent heat sources.

Engineering reference data for PCM1604Y/2K — comparison, design guidance, and compliance information.

Selection Guide

Choose PCM1604Y/2K when the design requires a six-channel, 24-bit enhanced multilevel delta-sigma audio DAC with operation up to 192 kHz in a 48-LQFP package. Select PCM1604Y/2KG4 when its ordering grade and production conditions are acceptable and its documented terminal compatibility allows a drop-in substitution. PCM1604Y may also fit an existing 48-LQFP design, but confirm the ordering suffix, temperature grade, packing, and lifecycle status before release. Do not use PCM1600Y/2K as an automatic replacement: although it shares the 24-bit, six-channel, and 192 kHz headline specifications, the available comparison indicates different electrical characteristics. For new designs where six discrete converter channels would otherwise be required, verify the complete digital interface, output topology, clocking, reference, filtering, and thermal requirements before consolidating onto this device.

Comparison with Alternatives

Parameter This Product PCM1604Y/2KG4 PCM1604Y
Package 48-LQFP 48-LQFP 48-LQFP
Brand Texas Instruments Texas Instruments Texas Instruments
Function 6-channel audio DAC 6-channel audio DAC 6-channel audio DAC
Converter Architecture Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma
Resolution 24 bits 24 bits 24 bits

Key Differentiators

  • Exact 24-bit, six-channel conversion configuration (vs PCM1604Y)
  • Documented terminal-compatible PCM1604 ordering variant (vs PCM1604Y/2KG4)
  • High-resolution multichannel integration (vs PCM1600Y/2K)

Design Notes

Route the PCM1604Y/2K analog outputs as short, symmetric paths to their associated filter networks, and keep the digital clock and data traces away from sensitive output nodes. Use the manufacturer reference layout as the baseline for ground partitioning, supply placement, and decoupling. The 48-pin LQFP footprint should follow the published land pattern, including the correct terminal pitch, pad length, and paste-aperture design.

Place every required decoupling capacitor immediately beside its associated supply pin and connect it to the nearest appropriate ground reference. Separate digital and analog supply routing where the datasheet specifies it, and avoid sharing narrow high-current paths between converter outputs and sensitive reference nodes. Verify capacitor voltage rating, effective capacitance under bias, and ESR suitability for the switching frequencies present in the design.

Design the digital interface for the fastest required sampling rate and use continuous reference planes beneath clock and data routes. Check setup and hold timing against the selected interface mode, and avoid unnecessary stubs or test-point discontinuities. For analog outputs, implement the specified reconstruction or smoothing network and keep component tolerances appropriate for the intended channel matching and distortion targets.

Estimated: converter power dissipation is the sum of supply-input power and analog-output power, less the power delivered to the external load. Use the worst-case supply current and analog operating state from the manufacturer datasheet, then compare the calculated dissipation with the package thermal limits. Provide adequate PCB copper and airflow because a small 7 mm by 7 mm LQFP can heat significantly when six channels operate continuously.

Do not treat PCM1604Y, PCM1604Y/2K, PCM1604Y/2KG4, PCM1604PT, PCM1604PTR, and PCM1600Y/2K as automatically interchangeable. Suffixes can identify grade, temperature range, reel packing, or ordering conditions, while related family members can have different pin functions or electrical characteristics. Verify the exact ordering table, pin descriptions, operating limits, and lifecycle status before approving a substitution.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The PCM1604Y/2K is an audio converter IC and is not presented as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the manufacturer documentation and remain unknown.

Related Searches

PCM1604Y/2K datasheet PCM1604Y/2K datasheet pdf PCM1604Y/2K pinout PCM1604Y/2K equivalent PCM1604Y/2K replacement PCM1604Y/2K cross reference PCM1604Y/2K price PCM1604Y/2K stock Texas Instruments PCM1604Y/2K PCM1604Y/2K 24 bit 192 kHz PCM1604Y/2K 48 LQFP PCM1604Y/2K vs PCM1600Y/2K

Related Components & Terms

Texas Instruments PCM1604Y/2K PCM1604Y PCM1604Y/2KG4 PCM1600Y/2K PCM1604 Digital-to-analog converter DAC Audio DAC Analog and mixed-signal IC Delta-sigma converter Enhanced multilevel delta-sigma architecture 24-bit resolution 192 kHz sampling 6-channel audio Dynamic range Signal-to-noise ratio THD+N I2S LFQFP-48 LQFP family Surface mount SMD Audio equipment CMOS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details