PCM1604Y/2K - 24-Bit 6-Channel Audio DAC | Texas Instruments
部品番号: PCM1604Y/2K ✓ 生産中PCM1604Y/2K 概要
A digital-to-analog converter, or DAC, converts digital audio samples into proportional analog voltages or currents. A multi-channel DAC supports several independent audio outputs within one package, reducing the component count required for surround-sound, active-speaker, professional-audio, and multimedia systems. Within the broader hierarchy, this device is an audio DAC, an analog and mixed-signal data-conversion IC, and a semiconductor used in professional audio and consumer electronics.
The PCM1604Y/2K provides six DAC channels with 24-bit resolution and a maximum sampling frequency of 192 kHz. Its enhanced multilevel delta-sigma architecture is intended to combine high-resolution reconstruction with a compact integrated audio-conversion solution. Typical performance includes 105 dB dynamic range, 104 dB SNR, and 0.0018% THD+N, making the device relevant to designs where low distortion and broad dynamic range influence audibility, headroom, or signal-chain fidelity.
The converter is implemented in CMOS and uses a gull-wing, square 48-pin LFQFP package. The 7 mm by 7 mm LQFP footprint provides accessible leads for conventional PCB assembly and inspection. Because this is a multichannel analog output device, PCB implementation must account for clean supply distribution, a stable analog ground reference, correct output-filter implementation, and separation between digital clock and data signals and sensitive analog output nodes.
Typical uses include home-theater surround-sound systems, powered loudspeakers, professional mixing consoles, multichannel audio interfaces, digital mixing desks, and active speaker crossover networks. Six integrated channels can also simplify channel-balanced designs compared with discrete single-channel converters. System designers should still verify the required interface mode, digital audio format, output topology, sampling rate, and external filter characteristics against the manufacturer datasheet before finalizing the circuit.
The primary design consideration is maintaining clean reference and analog-output behavior. Follow the manufacturer pin-description table when assigning every LQFP lead, and implement the specified analog and digital supply connections and decoupling arrangement. Keep sensitive analog traces short, maintain a continuous ground reference, and place output-network components close to their associated converter pins where the reference circuit permits.
This page combines technical specifications, application guidance, practical design considerations, package details, and drop-in replacement analysis in a compact engineering reference. It is intended to help designers evaluate the PCM1604Y/2K for multichannel audio systems while also identifying where an alternative offers a meaningful functional or packaging difference.
ドロップイン代替品: PCM1604Y/2K — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PCM1604Y/2K (同一形状・フットプリント) — 相違点: Converter Type, Package, Resolution, Dynamic Range, Maximum Sampling Rate.
PCM1604Y/2KG4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PCM1604Y
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCM1604Y/2K 最大定格&電気的特性
| Converter Type | 24-bit 6-channel enhanced multilevel delta-sigma DAC |
| Number of Channels | 6 channels |
| 分解能 | 24 bits |
| Maximum Sampling Rate | 192 kHz |
| Dynamic Range | 105 dB typical |
| Signal-to-Noise Ratio | 104 dB typical |
| Total Harmonic Distortion plus Noise | 0.0018% typical |
| Technology | CMOS |
| Package Type | 48-pin LFQFP |
| Package Dimensions | 7 mm x 7 mm |
| Terminal Count | 48 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| 実装タイプ | Surface mount |
| Digital Audio Interface | I2S |
PCM1604Y/2K square ピン配置ガイド
PCM1604Y/2K (square パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PCM1604Y/2K.
詳細は データシート をご参照ください。
主な用途
PCM1604Y/2K の用途: 6 件s: Home-Theater Surround-Sound Receiver, Powered Multichannel Speaker, Professional Digital Mixer, Multichannel Audio Interface, Digital Loudspeaker Crossover, Digital Recording and Playback System.
Home-Theater Surround-Sound Receiver
The PCM1604Y/2K fits a multichannel surround-sound receiver requiring six synchronized analog audio outputs. Its 24-bit conversion resolution and 192 kHz maximum sampling rate support high-resolution source formats, while typical dynamic range of 105 dB and SNR of 104 dB provide useful channel-to-channel headroom. Place the converter near the output filtering and analog ground reference, keep digital clock and data routing away from the analog outputs, and verify the supported digital interface before laying out the receiver PCB.
Powered Multichannel Speaker
A powered speaker can use the PCM1604Y/2K to convert six digital audio channels into low-distortion analog signals before amplification. The converter's 0.0018% typical THD+N and 104 dB typical SNR help preserve signal quality through the digital-to-analog stage, while its 48-LQFP package integrates multiple channels without requiring six separate converter packages. The design must provide a clean reference, suitable output filters, and short analog routing to maintain channel performance.
Professional Digital Mixer
The PCM1604Y/2K is suitable for a digital mixing console requiring multiple high-resolution audio outputs. Its six-channel architecture supports a compact multichannel conversion stage, and the 192 kHz sampling capability provides headroom for professional source material. A mixer implementation should use the manufacturer reference interface, isolate converter clocks from sensitive analog paths, and confirm that the external output network and clock architecture operate correctly at every required sample rate.
Multichannel Audio Interface
A multichannel audio interface can employ the PCM1604Y/2K to provide six balanced or single-ended analog outputs derived from a digital audio stream. The 24-bit resolution, 105 dB typical dynamic range, and 104 dB typical SNR align well with converter stages intended to preserve low-level musical detail. Keep the converter close to its output components, maintain a low-impedance analog ground reference, and validate the output level and filter choices against the load.
Digital Loudspeaker Crossover
The PCM1604Y/2K can form part of a digital loudspeaker crossover that generates separate low-, mid-, and high-frequency channels before amplification. Six outputs allow one converter to support a multiway or multichannel system, while the converter's 192 kHz sampling capability supports high-rate digital crossover processing. The output filters and crossover delays must be coordinated carefully to preserve phase alignment and prevent excessive conversion loss at the selected operating frequencies.
Digital Recording and Playback System
The PCM1604Y/2K is applicable to recording, monitoring, and playback equipment with several synchronized output channels. Its six-channel delta-sigma converter supports 24-bit audio at rates up to 192 kHz, making it relevant to high-resolution studio monitoring and playback designs. System designers should follow the manufacturer clocking and interface guidance, verify converter startup behavior, and implement the specified output and reference-network components for repeatable channel performance.
エンジニアリング参考データ: PCM1604Y/2K — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PCM1604Y/2KG4 | PCM1604Y |
|---|---|---|---|
| Package | 48-LQFP | 48-LQFP | 48-LQFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Function | 6-channel audio DAC | 6-channel audio DAC | 6-channel audio DAC |
| Converter Architecture | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma |
| Resolution | 24 bits | 24 bits | 24 bits |
主な差別化要因
- Exact 24-bit, six-channel conversion configuration (vs PCM1604Y)
- Documented terminal-compatible PCM1604 ordering variant (vs PCM1604Y/2KG4)
- High-resolution multichannel integration (vs PCM1600Y/2K)
設計ノート
Route the PCM1604Y/2K analog outputs as short, symmetric paths to their associated filter networks, and keep the digital clock and data traces away from sensitive output nodes. Use the manufacturer reference layout as the baseline for ground partitioning, supply placement, and decoupling. The 48-pin LQFP footprint should follow the published land pattern, including the correct terminal pitch, pad length, and paste-aperture design.
Place every required decoupling capacitor immediately beside its associated supply pin and connect it to the nearest appropriate ground reference. Separate digital and analog supply routing where the datasheet specifies it, and avoid sharing narrow high-current paths between converter outputs and sensitive reference nodes. Verify capacitor voltage rating, effective capacitance under bias, and ESR suitability for the switching frequencies present in the design.
Design the digital interface for the fastest required sampling rate and use continuous reference planes beneath clock and data routes. Check setup and hold timing against the selected interface mode, and avoid unnecessary stubs or test-point discontinuities. For analog outputs, implement the specified reconstruction or smoothing network and keep component tolerances appropriate for the intended channel matching and distortion targets.
Estimated: converter power dissipation is the sum of supply-input power and analog-output power, less the power delivered to the external load. Use the worst-case supply current and analog operating state from the manufacturer datasheet, then compare the calculated dissipation with the package thermal limits. Provide adequate PCB copper and airflow because a small 7 mm by 7 mm LQFP can heat significantly when six channels operate continuously.
Do not treat PCM1604Y, PCM1604Y/2K, PCM1604Y/2KG4, PCM1604PT, PCM1604PTR, and PCM1600Y/2K as automatically interchangeable. Suffixes can identify grade, temperature range, reel packing, or ordering conditions, while related family members can have different pin functions or electrical characteristics. Verify the exact ordering table, pin descriptions, operating limits, and lifecycle status before approving a substitution.
コンプライアンス情報
The PCM1604Y/2K is an audio converter IC and is not presented as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the manufacturer documentation and remain unknown.